Df error for lofs file system in local zone.

I 've a zone which is running oracle db instance. We have exported the SAN file system from the global zone as following
fs:
dir: /oradb
special: /oradb
raw not specified
type: lofs
options: []
from global zone
#df -h | grep oradb
/dev/dsk/emcpower174c 17G 5.1G 11G 31% /oradb/archa
/dev/dsk/emcpower177c 58G 3.3G 54G 6% /oradb/index1
/dev/dsk/emcpower172c 9.9G 610M 9.2G 7% /oradb/redob
/dev/dsk/emcpower176c 58G 30G 27G 53% /oradb/index2
/dev/dsk/emcpower180c 58G 35G 23G 61% /oradb/data1
Problem is from local zone if i do cd to /oradb/data1 and then df -h . , i get following error Is there anyway i get the usage or df o/p of lofs file system from the local zone itself
local_zone# df -h .
df: Could not find mount point for .
local_zone # pwd
/orad/data1
local_zone# df -h /oradbdb/data1
df: Could not find mount point for /oradbdb/data1
local_zone#

Do you have amount point within the zone path for these oradb mounts?
You have to add a directory entry for /oradb in the zone's root directory, i.e. ``zone_path''/root/oradb

Similar Messages

  • Best practices for ZFS file systems when using live upgrade?

    I would like feedback on how to layout the ZFS file system to deal with files that are constantly changing during the Live Upgrade process. For the rest of this post, lets assume I am building a very active FreeRadius server with log files that are constantly updating and must be preserved in any boot environment during the LU process.
    Here is the ZFS layout I have come up with (swap, home, etc omitted):
    NAME                                USED  AVAIL  REFER  MOUNTPOINT
    rpool                              11.0G  52.0G    94K  /rpool
    rpool/ROOT                         4.80G  52.0G    18K  legacy
    rpool/ROOT/boot1                   4.80G  52.0G  4.28G  /
    rpool/ROOT/boot1/zones-root         534M  52.0G    20K  /zones-root
    rpool/ROOT/boot1/zones-root/zone1   534M  52.0G   534M  /zones-root/zone1
    rpool/zone-data                      37K  52.0G    19K  /zones-data
    rpool/zone-data/zone1-runtime        18K  52.0G    18K  /zones-data/zone1-runtimeThere are 2 key components here:
    1) The ROOT file system - This stores the / file systems of the local and global zones.
    2) The zone-data file system - This stores the data that will be changing within the local zones.
    Here is the configuration for the zone itself:
    <zone name="zone1" zonepath="/zones-root/zone1" autoboot="true" bootargs="-m verbose">
      <inherited-pkg-dir directory="/lib"/>
      <inherited-pkg-dir directory="/platform"/>
      <inherited-pkg-dir directory="/sbin"/>
      <inherited-pkg-dir directory="/usr"/>
      <filesystem special="/zones-data/zone1-runtime" directory="/runtime" type="lofs"/>
      <network address="192.168.0.1" physical="e1000g0"/>
    </zone>The key components here are:
    1) The local zone / is shared in the same file system as global zone /
    2) The /runtime file system in the local zone is stored outside of the global rpool/ROOT file system in order to maintain data that changes across the live upgrade boot environments.
    The system (local and global zone) will operate like this:
    The global zone is used to manage zones only.
    Application software that has constantly changing data will be installed in the /runtime directory within the local zone. For example, FreeRadius will be installed in: /runtime/freeradius
    During a live upgrade the / file system in both the local and global zones will get updated, while /runtime is mounted untouched in whatever boot environment that is loaded.
    Does this make sense? Is there a better way to accomplish what I am looking for? This this setup going to cause any problems?
    What I would really like is to not have to worry about any of this and just install the application software where ever the software supplier sets it defaults to. It would be great if this system somehow magically knows to leave my changing data alone across boot environments.
    Thanks in advance for your feedback!
    --Jason                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hello "jemurray".
    Have you read this document? (page 198)
    http://docs.sun.com/app/docs/doc/820-7013?l=en
    Then the solution is:
    01.- Create an alternate boot enviroment
    a.- In a new rpool
    b.- In the same rpool
    02.- Upgrade this new enviroment
    03.- Then I've seen that you have the "radious-zone" in a sparse zone (it's that right??) so, when you update the alternate boot enviroment you will (at the same time) upgrading the "radious-zone".
    This maybe sound easy but you should be carefull, please try this in a development enviroment
    Good luck

  • Error message "Live file system repair is not supported."

    System won't boot. Directed to Disk Utility to repair but get error message "Live file system repair is not supported."  Appreciate all help.
    Thanks.
    John

    I recently ran into a similar issue with my Time Machine backup disk. After about 6 days of no backups - I had swapped the disk for my photo library for a media project; I reattached the Time Machine disk and attempted a backup.
    Time Machine could not backup to the disk. Running Disk Utility and attempting to Repair the disk ended up returning the "Live file system repair is not supported" message.
    After much experimentaion with disk analysis softwares, I came to the realization that the issue might be that the USB disk dock wasn't connected directly to the MacBook Pro - it was daisy-chained through a USB Hub.
    Connecting the USB disk dock directly to the MBP and running Disk Utility appears to have resolved the issue. DU ran for about 6 hours and succesfully repaired the disk. Consequently, I have been able to use that Time Machine disk for subsequent backups.

  • Problem with DMGs and error: "No Mountable File Systems"

    Problem with DMGs and error: "No Mountable File Systems"
    The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
    This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
    I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
    Recent programs includes:
    1) upgrading from Parallels 5.5 to 6.0 on both machines.
    2) using an HP secure II usb drive and setting up a secure disk.
    3) installing new itunes 10
    4) new update to Flip For Mac.
    The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
    Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
    In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
    Message was edited by: remaia

    Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

  • Service for network file system fails to install

    Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
    Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
    Click on the Roles node in the left pane, and then click the
    Add Roles link.
    On the Add Roles Wizard welcome page, click Next to continue.
    From the list of roles to install, select File Services, and click
    Next to continue.
    On the Introduction to File Services page, click Next to continue.
    On the Select Role Services page, keep the File Server box checked and select
    Services for Network File System. Click Next to continue.
    On the Confirmation page, review the settings and click the Install button.
    Click Close when the wizard completes.
    ServerManager Log:
    From the ServerManager.log file under C:/Windows/Logs I can see the below.
    2272: 2013-02-12 16:13:51.479 [CBS]                       IsCacheStillGood: True.
    2272: 2013-02-12 16:14:05.534 [Provider]                  System changed since last refresh: False
    2272: 2013-02-12 16:15:45.816 [InstallationProgressPage]  Loading progress page...
    2272: 2013-02-12 16:15:45.831 [InstallationProgressPage]  Begining Sync operation...
    2272: 2013-02-12 16:15:45.842 [Sync]                     
    Sync Graph of changed nodes
    ==========
    name     : File Services
    state    : Changed
    rank     : 1
    sync tech: CBS
    guest[1] : File Server
    guest[2] : Distributed File System
    guest[3] : File Server Resource Manager
    guest[4] : Services for Network File System
    guest[5] : Single Instance Storage
    guest[6] : Windows Search Service
    guest[7] : Windows Server 2003 File Services
    guest[8] : BranchCache for network files
    provider : FileServerRoleProvider
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    name     : File Server
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    2272: 2013-02-12 16:15:45.842 [Sync]                      Calling sync provider of Services for Network File System ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'Services for Network File System'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'Services for Network File System'.
    2272: 2013-02-12 16:15:45.843 [Sync]                      Calling sync provider of File Server ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'File Server', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'File Server'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'File Server', updateElement: 'CoreFileServer'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'File Server'.
    2272: 2013-02-12 16:15:45.844 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
    NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
    2272: 2013-02-12 16:15:46.315 [CBS]                       ...parents that will be auto-installed: '<none>'
    2272: 2013-02-12 16:15:46.316 [CBS]                       ...default children to turn-off: '<none>'
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p:
    Staged, a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to
    'InstallRequested'
    2272: 2013-02-12 16:15:46.335 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.336 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a:
    Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...current state of 'CoreFileServer': p: Staged, a: Staged,
    s: UninstallRequested
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...setting state of 'CoreFileServer' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.373 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    2272: 2013-02-12 16:15:46.390 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.408 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    2272: 2013-02-12 16:15:46.426 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.435 [CBS]                       ...'CoreFileServer' : applicability: Applicable
    2272: 2013-02-12 16:15:46.493 [CbsUIHandler]              Initiate:
    2272: 2013-02-12 16:15:46.494 [InstallationProgressPage]  Installing...
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Error: -2147021879 :
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Terminate:
    2272: 2013-02-12 16:15:52.035 [InstallationProgressPage]  Verifying installation...
    2272: 2013-02-12 16:15:52.049 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient
    ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
    Status: -2147021879 (80070bc9)
    2272: 2013-02-12 16:15:52.052 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [FileServer]                Skipped configuration of 'File Server' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System',
              'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
    [STAT] Configuration(s) took '0.0002143' second(s) total.
    [STAT] Total time: '6.206078' second(s).
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Sync operation completed
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Performing post install/uninstall discovery...
    2272: 2013-02-12 16:15:52.056 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    2272: 2013-02-12 16:15:52.056 [CBS]                       IsCacheStillGood: False.
    2272: 2013-02-12 16:15:52.526 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
    80070bc9 (-2147021879)
    2272: 2013-02-12 16:15:59.342 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.380 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    2272: 2013-02-12 16:15:59.390 [InstallationProgressPage]  About to load finish page...
    2272: 2013-02-12 16:15:59.390 [InstallationFinishPage]    Loading finish page
    2272: 2013-02-12 16:15:59.401 [InstallationFinishPage]    Finish page loaded
    In Windows Event long I can see the following events logged:
    Event 3002, Port Map:
      Windows(R) failed a request to register RPC Port Mapper on TCP port 111.  RPC Port Mapper cannot start.
      Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers.  Without RPC Port Mapper, Server for NFS
    cannot start and NFS clients cannot access files on this server.
      Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
    Event 7000, Service Control Manager:
    The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
    The dependency service or group failed to start.
    Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
    Dependent Service Status:
    During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
    “31 (0x1f)”. Please find below the query result.
    C:\Users\CMMAdmin>sc query rpcxdr
    SERVICE_NAME: rpcxdr
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query msnfsflt
    SERVICE_NAME: msnfsflt
            TYPE               : 2  FILE_SYSTEM_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query portmap
    SERVICE_NAME: portmap
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 1  STOPPED
            WIN32_EXIT_CODE    : 31  (0x1f)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>
    As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
    Please let me know if you have any suggestion on how debug this issue further.
    Thanks
    -Poopesh

    Hey,
    I had this same problem running MS Server 2008 R2 and server log is as follow:
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    ant.     : empty
    pred.    : File Services
    provider : FileServerRoleProvider
    5676: 2014-01-14 14:08:57.474 [Sync]                      Calling sync provider of Services for Network File System ...
    5676: 2014-01-14 14:08:57.521 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    5676: 2014-01-14 14:08:57.536 [FileServer]                Begin installation of 'Services for Network File System'...
    5676: 2014-01-14 14:08:57.536 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    5676: 2014-01-14 14:08:57.536 [FileServer]                Installation queued for 'Services for Network File System'.
    5676: 2014-01-14 14:08:57.536 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure ' ...
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...parents that will be auto-installed: '<none>'
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...default children to turn-off: '<none>'
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.313 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    5676: 2014-01-14 14:09:00.360 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:00.422 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    5676: 2014-01-14 14:09:00.469 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:01.624 [CbsUIHandler]              Initiate:
    5676: 2014-01-14 14:09:01.624 [InstallationProgressPage]  Installing...
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Error: -2147021879 :
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Terminate:
    5676: 2014-01-14 14:09:41.170 [InstallationProgressPage]  Verifying installation...
    5676: 2014-01-14 14:09:41.264 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
    5676: 2014-01-14 14:09:41.279 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    5676: 2014-01-14 14:09:41.279 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
    [STAT] Configuration(s) took '0.0062843' second(s) total.
    [STAT] Total time: '43.7431429' second(s).
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
    made
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Sync operation completed
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Performing post install/uninstall discovery...
    5676: 2014-01-14 14:09:41.295 [Provider]                  C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    5676: 2014-01-14 14:09:41.295 [CBS]                       IsCacheStillGood: False.
    5676: 2014-01-14 14:09:43.900 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
    5676: 2014-01-14 14:09:57.410 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.488 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    5676: 2014-01-14 14:09:57.613 [InstallationProgressPage]  About to load finish page...
    5676: 2014-01-14 14:09:57.628 [InstallationFinishPage]    Loading finish page
    5676: 2014-01-14 14:09:57.644 [InstallationFinishPage]    Finish page loaded
    My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
    the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
    Have a good one!

  • OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]

    Hi Guys,
    Im trying to create a repository .I have a single node OVM server and have presented two LUN's (Hitachi  HUS110 direct attached (via FC))
    I've created a server pool and unchecked the clustered server pool. I see the LUN's (physical disk from Oracle Virtual manager) .But when creating the repository i'm having this error
    "OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]"
    Any steps i missed?Appreciate anyone's input
    Regards,
    Robert

    Hi Robert,
    did you actually add the OVS to the server pool, that you created?

  • Return The remote server returned an error: (403) Forbidden error for some file types

    hi
    am using below code to get the byte array 
    byte[] myDataBuffer = client.DownloadData((new Uri(sourceUrl)));
    for source of type .txt/.jpg no problem with accessing.but the file type with .master/.wsp/.cs
    it is returning "The remote server returned an error: (403) Forbidden error for some file types" Error.how can i get rid of this.please help me
    Thanks in Advance

    Hi,
    It seems there is something wrong with your code, from your code the account and key are the same, because their appsetting name are the same.
    string account = ConfigurationManager.AppSettings["StorageAccountName"];
    //string account = CloudConfigurationManager.GetSetting("StorageAccountName");
    //string key = CloudConfigurationManager.GetSetting("StorageAccountAccessKey");
    string key = ConfigurationManager.AppSettings["StorageAccountName"];
    string connectionString = String.Format("DefaultEndpointsProtocol=https;AccountName={0};AccountKey={1}", account, key);
    return CloudStorageAccount.Parse(connectionString);
    If you use CloudConfigurationManager.GetSetting, please consider set azure project as the startup project, if not, this value will be null, this resulted in solution being started as a web project that didn't run inside the Azure emulator. Since CloudConfigurationManager.GetSetting
    tries to get setting by contacting Azure (or Azure emulator in this case), and it is not running, it returns null.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cloned volume gets stuck at boot "Waiting for Network File System"

    I've used "Carbon Copy Cloner" many times with success and no problems (v 2.3 , default settings, make destination bootable) as I migrated to larger drives or make backups in advance of a major OS upgrade.
    Last time I was successful, I was at OS 10.3.5. I use 3rd drive to boot my Mac, then clone the one non-boot drive to the other. I do the disk repairs & permission repairs as the normal course of this process, before & after. I am now at 10.3.9. I am do this clone in prep to go to 10.4 so I have a good back in the event of later problems.
    When I attempt to boot from the newly cloned partition, it goes fine on the boot process until it hangs at the "Waiting for Network File System" step and never gets past there. I've never had this happen before. I retired all the steps, even ran "Diskwarrier", but no change.
    I am not trying to run from a remote or network drive, just a 2nd drive in my
    G4 from which I have previously been able to boot (until this last clone attempt that is).
    I googled the symptoms ""Waiting for Network File System"", found it to be common, but no real answers. Is this one of those annoying UNIX things? Any ideas how to fix / turn-off whatever is hanging the boot up? Thanks in advance!

    Hi Kool,
    So there seems to be a "speed-bump" around 10.3.9. No wonder I have had the same results with a different tint. I went to Drive Genius to clone this one. Results with that were interesting.
    If I did a [Device] clone, it would take and show at start with 'option' key... and work just like my internal with 3 accounts on it... login and proceed like it was internal. If I did a [Volume] clone, it would not show up at start with the 'option' key... I'd have to boot it from System Preferences > Start-up Drive. Once booted, it had no login screen so all the files were accessible. I took the clone of this 3 account PB and tried it on an iBook. Had to boot from System Preferences too, also, all the account were accessible from that machine... implying that anyone who had that drive could get past/into my files that would be secure on my computer, but not on the clone. If I took the [Device] clone and booted from the ibook at start with the option key, it would not get past the login screen... altho the mouse worked and I could click on the name, that was as far as it got, Froze.
    So, I have figured, for safety, a [Device] clone is it, as long as the original computer lives. The safety features for login seem to be hardwired in the chip that the clone was made from (The iBook had 2 accounts but not my 3). If safety is not an issue, the [Volume] clone is fine... like moving to a newer OS on the same computer. It would seem from your experimentations that the situations with this 10.3.9 is just a hick-up and is solved in 10.4.3 with CCC v3...
    Thanks for your info... I am thinking of going to Tiger, but I am so fond of this Panther...
    Bo

  • Plumtree Crawler Web Services for NT File Systems

    Hi,
    I'm working with Corporate portal v5.0.4J. I'm trying to figure out if the 'crawler web services for NT file systems' are build into the portal or whether it is an optional component that needs to be installed?
    Any info is appreciated.
    J

    The Windows Files Content Service is a separate component from the portal. You can download this component from the Product Center.
    -Paul

  • Could not load file/URL (file not found) error for JNLP file

    I am completely baffled in trying to figure out why I am getting the following error for some JNLP files but not others:
    Error: could not load file/URL specified: C:\Users\tom\AppData\Local\Temp\javaws2
    java.io.FileNotFoundException: C:\Users\tom\AppData\Local\Temp\javaws2 (The system cannot find the file specified)
    at java.io.FileInputStream.open(Native Method)
    at java.io.FileInputStream.<init>(Unknown Source)
    at java.io.FileInputStream.<init>(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
    at com.sun.javaws.Main.launchApp(Unknown Source)
    at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
    at com.sun.javaws.Main$1.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)I have Googled around this forum and elsewhere, and have seen reports that this error is IE-specific, and seems to have something to do with no-cache headers being sent, or with the client browser's cache being full or turned off (which is not my case). I saw the information in the JavaWS FAQ, which recommended turning off security constraints for the JNLP's URI. I tried that, and it didn't help. One of the very baffling things is that I have created several variations of the JNLP file, with varying combinations of jars and property resources, and some combinations always work while other combinations never work. Here's an example:
    <jnlp spec="1.0+" codebase="$$codebase">
       <information>
          <title>demo app</title>
          <description>illustrates weird bug</description>
       </information>
       <resources>
          <j2se version="1.5+"/>
          <jar href="randomFile.jar"/>
          <property name="xxx" value="xxxx"/>
          <property name="swing.metalTheme" value="steel"/>
       </resources>
    </jnlp>The above file always fails with the error shown at the top of this message. However, if I remove either of the two properties, it works fine. And I have created other variations with lots of properties, some of which work. All of these variations are in the same directory in the war file, served by the exact same servlet (a slightly modified version of the jnlp.sample.servlet.JnlpDownloadServlet provided with JDK 1.6.0_3). Assuming that a no-cache header is the problem, what on earth could be causing some JNLP files to always be served with a no-cache header, while others are never served with a no-cache header?
    On a related note, any recommended debugging techniques for seeing what headers are being transmitted? I tried adding a simple check for a "debug=true" parameter in the servlet that causes it to set the content type to "text/plain" instead of JNLP, and that allows me to see (rather than execute) the JNLP XML that's being returned, but it doesn't show me the HTTP headers that are being sent back. If any caching headers are being set, I think it must be being set by the servlet container itself, as it's nothing being set in the servlet code that I can see. So I don't see any way on the server side Java code to output or log the actual HTTP response (or is there?). Any tips in that regard much appreciated.
    Edited by: TomC125468 on Aug 19, 2009 1:35 PM

    Hi Luca-Sanna,
    Thanks for the response. Re browsers, yes, it fails in IE but it succeeds in Firefox. The info on the JavaWS FAQ and other places all seem to indicate that it's an IE issue concerning handling of the cache-control headers.
    I should check in my webserver forum (Sun WebServer 7) to see about logging options. Sniffing on the client side is not possible, as my app is required to use HTTPS exclusively, and unfortunately that also precludes a telnet GET request.

  • How do I identify the latest file modifications, application install, and registry key modification for Security Forensics.... using GP Audit for registry/file system

    Hello,
    Title pretty much states it all. I initially set out (as part of a Security Forensics initiative) to identify the most recently installed applications, modified files, and registry key changes using PowerShell. I attempted to pull this information and sort
    them by date installed/last modified, but it was brought to my attention this information isn't always present and can be modified - so it's not accurate.
    At that time it was suggested we use Group Policy auditing for Registry and File System -  but I'm not sure how I'm going to use/pull these in PowerShell? This will be used on remote host all over the world so local physical access isn't an option.
    My question is:
    Once Group Policy Auditing for Registry and File System has been enabled, how would I go about pulling those audit logs for review once a system has been identified as compromised? I'm brand new to this GP Auditing (we have a separate team for that) so feel
    free to take it from the beginning. :)
    Thanks in advance!

    Hi,
    Here are a few suggestions for you:
    Ensure Remote Registry service is started on local and remote machines.
    Add the – Credential option and supply administrative credentials within the command.
    More information for you:
    Get-Eventlog doesn't work against Vista/W7 clients
    https://social.technet.microsoft.com/Forums/en-US/c5185a01-b0d2-49a7-9aa7-52e6534ada04/geteventlog-doesnt-work-against-vistaw7-clients?forum=winserverpowershell
    PowerShell - How to Get XML EventData - Remote Eventlogs - Exchange Events
    https://social.technet.microsoft.com/Forums/scriptcenter/en-US/382b10c9-d740-46b1-b81c-b24de911eb14/powershell-how-to-get-xml-eventdata-remote-eventlogs-exchange-events-?forum=ITCG
    Powershell script to gather failed logon attempts by event id and type from the security events log
    https://social.technet.microsoft.com/Forums/scriptcenter/es-ES/00a62492-c63a-4c8b-92f9-1cc857223a00/powershell-script-to-gather-failed-logon-attempts-by-event-id-and-type-from-the-security-events-log?forum=ITCG
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • In ODI where we maintain the folders for a file system

    Hi all
    For file system,I have to maintain different type of folders in Dev server.for example
    Input,Process,Error,Log,etc..Where we going to maintain these folders in the devlopment server?
    Can you be clear about the File system is maintained in the ODI environment?If pleease give any specified PDF.
    Regards
    suresh

    Hi Suresh
    To try to help you, could you give more details about what exactly you need?
    I couldn't understood what you need to know....
    Cezar Santos
    [www.odiexperts.com|www.odiexperts.com]

  • Import error for .prproj files

    so i've just touched adobe mc CS4 for the first time, my church is allowing me to use the studio/editing room while not being used during the day at certain times. i am compiling a dvd of my wedding to make it more proffessional than the previously made vesion (which looks very amateur with a basic template menue, and so on). i plan to use some flash on the menus and maybe even include an easter egg as well. anyway, with the other program i just imported the media from the camera (which is an HDD camera that records everything into .mod files) i've had a .mod converter for quite some time so those are already converted.i saved them on an external HDD, i created a folder on the computer and just dragged and dropped the folder onto there.
    anyway, with my old program (cyberlink power producer/director) i'd just import the media into the editor, make the edits and cuts and save the project. then import the project into the author program to make teh menus and burn it. when i first pulled up the program to get acclimated to it, i decided to run through a very quick dry run of a full start to stop dvd burn of a very small video. i did a short series of clips and edits in Premiere (the oevr all project is like 6 minutes long). saved the project, and when i go to import the project into Encore it reads "the software that's used to decode the media is not available on this  system""adobe encore the software that's used to decode the media is not  available on this system. installing the correct decoders for the file  you are working with may help correct the problem."
    i can encode the project as an mpeg, and it imports just fine. i can import the individual clips that make up the project into encore, they work fine as well.but if i import the .prproj file, it gives me the error. so whats the deal? can you just drag and drop these files in like this? i'm just trying to keep from constantly encoding the files after 3 encodes, i'm affraid the quality of the video will suffer too much degradation, so i'm trying to get it to where i can just import the project, and then at the end burn the project to dvd.
    i figured it better to ask on here, this way i look like a fool anonymously, and not look like a fool to people i actually know. heh.

    PrPro will come to you. It has fewer "automations," and "big-button" solutions, than PowerDirector (and Magix and PrE), but with that comes power!
    It is the same with Encore vs the limited authoring capabilities of PowerDirector, Magix, Roxio and PrE. Again, more hand-work, but oh, so much more power!
    Can you tell that I am a control freak, and do not mind getting my hands dirty to access the power?
    There are a few things that Encore cannot do, that programs like Sonic Scenarist can do, but there are usually workarounds, either in the design, or in the implementation, that will get you "there," or close.
    I strongly recommend that any new user to Encore purchase and read Jeff Bellune's excellent book, The Focal Easy Guide to Adobe EncoreDVD 2.0, Focal Press. That book covers everything that Encore can do, with two current exceptions - Adobe Dynamic Link (CS4 version) and BD authoring. Both of those were added after the book and EncoreDVD 2.0, were released. However, the Help files cover both of those newer additions well.
    Along with the fundamentals of Encore, Jeff covers all sorts of tricks and tips for getting more out of Encore, than the DVD-specs. actually allow. Obviously, he cannot break those rules, though he CAN help you create the illusion that the rules HAVE been broken. The user will swear that they just saw things, that are impossible, based on the DVD-specs., which are very limiting. Hey, it IS "smoke and mirrors," but if the user is fooled, you have succeeded, right?
    Good luck, and when you get around to adding some "tricks" to your DVD-Videos, post back. I'd suggest a new thread, so that other users can benefit from the new title, and so that users know that this is a new question. You will find that there is not too much, that someone here has not done, one way, or another. Oh, there ARE some limitations, where there is no good way to "bend" those DVD-specs., but you'll be surprised at what one can "bend."
    Happy authoring,
    Hunt

  • HTTP2228 error while serving files from the local hard drive

    I see lots of these errors in the logs files:
    [05/Oct/2007:07:02:14] warning (28667): for host 192.168.123.11 trying to GET /confluence/images/icons/people_directory_32.gif, finish-
    response reports: HTTP2228: Response content length mismatch (970 bytes with a content length of 947)
    [05/Oct/2007:07:02:14] warning (28667): for host 192.168.123.11 trying to GET /confluence/images/border/spacer.gif, finish-response rep
    orts: HTTP2228: Response content length mismatch (58 bytes with a content length of 43)
    [05/Oct/2007:07:02:14] warning (28667): for host 192.168.123.11 trying to GET /confluence/images/icons/home_16.gif, finish-response rep
    orts: HTTP2228: Response content length mismatch (450 bytes with a content length of 594)
    [05/Oct/2007:07:02:14] warning (28667): for host 192.168.123.11 trying to GET /confluence/images/border/border_bottom.gif, finish-respo
    nse reports: HTTP2228: Response content length mismatch (116 bytes with a content length of 117)
    [05/Oct/2007:07:10:32] warning (28667): for host 192.168.123.11 trying to GET /confluence/images/icons/favicon.ico, finish-response rep
    orts: HTTP2228: Response content length mismatch (282 bytes with a content length of 2041)
    [05/Oct/2007:07:10:32] warning (28667): for host 192.168.123.11 trying to GET /confluence/images/icons/attachments/pdf.gif, finish-resp
    onse reports: HTTP2228: Response content length mismatch (327 bytes with a content length of 361)
    [05/Oct/2007:07:10:32] warning (28667): for host 192.168.123.11 trying to GET /confluence/images/icons/add_blogentry_16.gif, finish-res
    ponse reports: HTTP2228: Response content length mismatch (329 bytes with a content length of 385)
    [05/Oct/2007:07:10:32] warning (28667): for host 192.168.123.11 trying to GET /confluence/images/icons/wait.gif, finish-response report
    s: HTTP2228: Response content length mismatch (1347 bytes with a content length of 1553)
    [05/Oct/2007:07:10:32] warning (28667): for host 192.168.123.11 trying to GET /confluence/images/icons/watch_16.gif, finish-response re
    ports: HTTP2228: Response content length mismatch (568 bytes with a content length of 655)All these files are located on the local hard-drive:
    root@birokrat:~# ls -l /opt/webserver7/https-birokrat/web-app/birokrat/confluence/images/icons/wait.gif*
    -rw-r--r--   1 webservd webservd    1553 Oct  4 17:16 /opt/webserver7/https-birokrat/web-app/birokrat/confluence/images/icons/wait.gif
    -rw-------   1 webservd webservd    1347 Oct 17 14:14 /opt/webserver7/https-birokrat/web-app/birokrat/confluence/images/icons/wait.gif.gzI still do not understand why comes this error. If it is sending wait.gif.gz, then it is sending 1347 bytes and not 1553 bytes. This error comes in combination with gif, png, pdf and also one servlet.
    [16/Oct/2007:09:07:42] warning ( 8298): for host 192.168.123.11 trying to GET /confluence/plugins/servlet/tiny_mce/zip_src, finish-response reports: HTTP2228: Response content length mismatch (390 bytes with a content length of 945)How can I solve this problem?
    Kind regards,
    Damjan

    First what I think is wrong is output filter should work on dynamic files and not static files like images.
    I am unable to reproduce it even inside a web-app. We need your web-app to see whats happening. Can you reproduce it for every single request you send to he server? Can you run web server in log-level finest (change server.xml <log-level> element) so that we can know some more detials. Just send finest log for one request.
    I was just checking the syntax of compression directives I found these examples, (underlined lines are new lines that should be added)
    For dynamic compression :
    =====================
    <Object name="default">
    NameTrans fn="assign-name" from="*.jsp" name="compress"
    </Object>
    _<Object name="compress">_
    Output fn="insert-filter" filter="http-compression"
    _</Object>_
    Do not use this for static files.
    There should be only one insert-filter directive. Why do you have two? That could be a problem.
    For static compression :
    =================
    <Object name="default">
    NameTrans fn="assign-name" from="*.html" name="find-compressed"
    Service method=(GET|HEAD|POST) type=*~magnus-internal/* fn=compress-file subdir=".compressed-files"
    Service method=(GET|HEAD|POST) type=*~magnus-internal/* fn=send-file
    </Object>
    _<Object name="find-compressed">_
    PathCheck fn="find-compressed"
    _</Object>_
    Do not use this for dymanic files.
    (if u dont have fn=compress-file line its ok it will just create a .gz file if not present in .compressed-files directory without this directive u need to keep pre compressed file in docroot for find-compressed to work)

  • File format error for xml file

    Hi!
    We are trying to upgrade our SAP 4.6C to EHP4.
    While "configuration roadmapstep", system asks us the XML file we have
    produced via solman. When we enter the path of the file system gives theerror below:
    The selected configuration file
    ("E:\downloadupg\SMSDXML_FKQ_20100917142727.656.xml") is not useable.
    Reason: "File format error"
    We have tried the txt file instead of xml file. The result was same.
    You can find the details of our system.
    4.6D EX2 32 bit kernel
    windows 2003 64 bit OS
    sql 2005 64 bit database software
    We have to upgrade our system until that monday.
    Please help us as soon as possible.
    Best regards
    Noyan Durna

    Hello Noyan,
    first, the official information: please refer to note #1022704 - for source release 4.6, the TXT file has to be used instead of the XML file. Otherwise, 'File format error' will occur as in your case.
    But since you tried this option, you should turn your attention to the XML itself, which must contains entries that are not handled by function module OCS_GET_UPG_STACK_INFO in the 4.XX source systems. The function module only expects the entries [SPAM_CVERS], [PRDVERS] and [SWFEATURE].  Any other entries present on the file can cause an error. 
    Please check your file for other entries like [APP_SYSTEM], [SWFEATUREINC], [TECHUSAGES], [INITIAL_CVERS], [EXPORT_CVERS], and [DVD_SET]; this might be the cause of the error. 
    In order to workaround this, you can either edit the file and remove the invalid entries or recreate it (w/o this entries also).
    Best regards,
    Tomas Black

Maybe you are looking for