DFF- remove additional information

Hi,
We have created item on OAF page, using DFF and personalization.
But its showing "additional information" even though we did not set it. In additional information the same data is being set as of the field.
How can we remove this additional information?
Its just same as of "flex" exercise in toolbox tutorial.
To simulate, on below link I have posted, same exercise screen.
In this screen, how to remove extra "HQ" appearing below WareHouse field. (In blue).
In below page
[http://docs.google.com/View?id=dcj23bwr_25dmzggxg4|http://docs.google.com/View?id=dcj23bwr_25dmzggxg4]
Abdul Wahid

Hi Sriram
Completely agree with you on this however i tried to find that what is the use of Last Name Different Flag in Statutory Transaction Information but could not find it any where. May be you need to submit a SR to Oracle as why this attribute is mandatory by default.
Thanks,
Gaurav

Similar Messages

  • What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

    Hello All,
    What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
    Navigation
    Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
    The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
    Thanks & Regards
    Ayesha

    Thanks Sridar
    If we use Number we cannot separate the cheque numbers with , or -
    We need to enter numbers along with comma and '_' in cheque number field.
    Thanks & Regards
    Ayesha

  • Basis of choosing EIT, SIT and Addition Information DFF

    Hi Gurus,
    Can you please enlighten me on the basis of choosing EIT, SIT, Further Infomation or Additional information DFFs for capturing a particular data .
    Since all these options provide users to add new segments to capture data specific to customer's business requirement, on what basis we should decide which one should be taken to add the new segment ?
    I have a vague idea, hence would like to have a clear understanding with the help of the gurus out here.
    Thanks a ton in advance.

    Hi,
    Please see if these documents/links help.
    Note: 210616.1 - SIT vs. EIT - What Is The Difference?
    Differences between EIT and SIT in HRMS
    http://oracle.anilpassi.com/differences-between-eit-and-sit-in-hrms.html
    Oracle Applications Documentation
    http://www.oracle.com/technology/documentation/applications.html
    Regards,
    Hussein

  • MSS: Remove "Show Additional Information" .

    In MSS, I would like to change the Compensation Planning screen. The Link area that can be opened (Show Additional Information) should be removed.
    I've found the code is in the DC mss/ecm. However, I'm not familiar with the FPM, so I could use some help.
    Thanks,
    Lieven

    you can customize it man,
    Hide the Link, or else ask your administrator for configuration of framework page for mss overview page or compensation page, may be you can edit in the framework page of the mss in the backend alos,
    i am not sure about the framework page of mss, but you can edit the dc,
    Cheers,
    Apparao

  • Please restore e-mail or at least give us some real information.  Tech support is almost smug in their response for additional information.  The iCloud status page has said the same thing since yesterday.  A real dis-service.  My business depends on this!

    Please restore e-mail or at least give us some real information.  Tech support is almost smug in their response for additional information.  The iCloud status page has said the same thing since yesterday.  A real dis-service.  My business depends on this!  Any one have any suggestions not being offerd by tech support or Apple?  Anything at all?

    mdjb wrote:
    I just lost a big opportunity to get a new client because of this!!   almost 24 hours now without any email service. I was one of the original.mac customers.  I am over this time to move on. It is an inferior product.
    My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
    APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
    And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service.

  • Remove Hidden Information tool

    Hi,
    I would have a question regarding Acrobat's 'Remove Hidden Information' tool. Under Tools, Protection there is the 'Remove Hidden Information' tool. When I click it the results can be seen on the left side. Under 'Comments and markups' the sum of objects can be seen. I figured out that it detects bookmarks, links (internal, external) and objects described here: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7e7f.w .html.
    But it also detects some other objects as well which I am not aware of (based on the number of objects detected). I also know that it counts 2 objects when using 'Replace text' from the link above.
    Does anybody happen to know what additional types of objects does this tool detects and how to search for them in the document?
    Thanks for your help,
    Csanad
    I use Acrobat version 10.1.5

    The hidden text is the collection of glyphs on the PDF page that use text rendering mode 3 (no stroke, no fill). 
    Any links placed in association with such hidden text are not "hidden" (that is not how it works with PDF Link annotations - see ISO 32000-1:2008). 
    Any Link annotation placed in a PDF are the same as any other Link annotation (with the exception, of course, of whatever the link's Action happens to be).
    So, no special sauce for links that were placed in association with now removed "hidden text".  
    In context of what you've written it may be that you will have to select - Ctrl+click the Link annotations of interest then tap the Delete key. 
    Be well...

  • How can we capture additional information on interaction Wrap-up screen

    Hi,
    We need to capture the additional information (for e.g. the contract number created during the interaction) on the call wrap-up screen. But the Doc# field is disabled and there are no DFFs as well. Any suggestions would be very helpful. Thanks and regards, Smita

    I know this will sound like a conspiracy theory, but maybe Apple doesn't want you printing from your iPad... yet. Could be something Apple did so as not to "Steal their Thunder" when they announce the upgrades on the next generation iPad. Just a thought...

  • DFSR Replication Event ID 1202 The DFS Replication service failed to contact domain controller Additional Information: Error: 160 (One or more arguments are not correct.)

    Hi,
    hummmm...
    The client had 1 Server with AD and All Apps, IIS, Terminal Servers (30 device Cal), File Server, SQL2008R2 on it
    Task: Install new AD server promote it to DC,  bring in 2nd server, Replicate the File Server (DFSR) on these 2 servers, and demote it to standard server. 
    1) Old AD with name "Server" with OS-2008R2 SP1 and is a DC.
    2) Brought in a new server "PrimaryAD", Installed 2008R2, done DC Promo, and added it as Additional Domain controller
    3) Transferred roles from old server "Server" to "PrimaryAD"
    4) Brought in a new File Server replicating server "Backup-Server"
    5) Copied all the data from Server to Backup-server as DFS initial file sync with robocopy
    6) here the problem started, after the copy finished, next morning the "Server" server crashed.....
    7) thank god the data was backed up on Backup-server. but we didnt get the time to Demote the server "Server" and remove AD from it.
    8) Since AD was replicated so "PrimaryAD" was are DC, brought 2nd Server "SecondaryDC" as additional domain controller.
    9) we cleaned up the metadata and used ASIEDIT to clean the remaining stuff.
    10) the "Server" server was formatted and renamed as "Primary-Server" and OS2008R2 SP1 was installed with rest of required apps
    11) so now the PrimaryAD the DC, SecondaryAD the Additional Domain controller, Primary-Server the mail server and File server, the Backup-server, the replicated server.
    Now configured DFS Replication from Primary-Server to Backup-server and receive following Event ID 1202
    If i Configure DFS Replication as follows
    PrimaryAD <<>> SecondaryAD -= Works... no errors...
    PrimaryAD <<>> Backup-Server = Creates but Dosent works Event ID 5012, error The DFS Replication service failed to communicate with partner BACKUP-SERVER, Additional Information: Error: 9026 (The connection is invalid)
    PrimaryAD <<>> Primary-Server = Dosent creates replication job just hangs,
    on primaryad continious Eveni ID 10009, DCOM was unable to communicate with the computer "SERVER" using any of the configured protocols
    ......something on PrimaryAD is still trying to connect to old corrupt AD server "Server"
    No errors with AD replication, SYSVOL & Netlogon shares also working fine and accessible.
    DFS Diagnose report says
    DNS name: backup-server.mydomain.com
    Domain name: mydomain.COM
    Reference domain controller: --           (HERE there is NO DOMAIN CONTROLLER mentioned) 
    IP address: 192.168.1.248,192.168.1.251,::1
    Site: Default-First-Site-Name
    Forgot to mention, gave full rights with ADSIEDIT to DFSR-LocalSettings  for all server to Administrator and read permissions to "Authenticated Users"
    DFSRDIAG POLLAD throws following error
    c:\Dfsrdiag pollad /verbose
    [INFO] Computer Name: BACKUP-SERVER
    [INFO] Computer DNS: Backup-Server.mydomain.COM
    [INFO] Domain Name: mydomain
    [INFO] Domain DNS: mydomain.COM
    [INFO] Site Name: Default-First-Site-Name
    [INFO] Connected to WMI services on computer: Backup-Server.mydomain.COM
    [INFO] Invoke PollDsNow() method on Backup-Server.mydomain.COM
    [ERROR] PollDsNow method executed unsuccessfully. ReturnValue: 12 (0xc)
    [ERROR] Failed to execute PollAD command Err: -2147217407 (0x80041001)
    Can anyone point me to any direction which can lead to resolution of this ERROR and make DFS_R work..
    Thanks
    bikram

    Hi,
    It seems that DCPROMO did its work without complaints, still the DFSR references remained in AD. You could refer to the article below to clean up the DFS Replication object.
    How to remove data in Active Directory after an unsuccessful domain controller demotion
    http://support.microsoft.com/kb/216498
    In additional, please refer to the following thread to troubleshoot the issue:
    DFS is not working anymore.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Oracle hrms install additional information types for classification

    Hi,
    We have ran out of DFF segments in the Orgn screen. Requirement is to capture additional information against Organizations.
    As a work around, we intend to capture additional information by adding NEW information type for the classification 'HR Organization'.
    Appreciate if any one can provide some tips on this.
    Thanks,
    Raghu

    Avaneesh,
    I see your message and it may relate to what I'm trying to do.
    I need to set up an extra information for Assignments, particularly for contingent workers.
    Could you explain how to access "Register Extra Information Types"? and what is Org Developer DF, or any equivalent for Assignments?
    Thanks,
    Skip

  • JAR creation failed. See details for additional information.-invalid header

    Hi
    I am working with 2 databases , 1 is oracle and the other is sybase in my java application.
    The java application gets data from both the databases and creates 3 output files and 1 audit log file .
    Now i tried creating the jar file
    my manifest file looks like this :
    Manifest-Version: 1.0
    Sealed: true
    Main-Class: tableA
    Class-Path:jtds-1.2.jar;classes12.jar ----------------------------> is this correct .
    Now when i try to create the jar file it gives me an err
    JAR creation failed. See details for additional information.-
    invalid header field
    invalid header field
    ANyone pls help me ... I am creating the jar file like rhis
    export -> selecting JAR file -> selecting 1 and 3 rd checkboxes ->location of the jar file -> next->selecting 2 checkboxes in JAR PACKAGING OPTIONS -> ( my question is how to create the manifest file with class-path , their is no option ) so i am creating the manifest file and creating the jar file and then adding the class-path to the manifest file and removing the jar file and recreating the jar file now selecting the manifest file .
    is this giving the above error --> if so how to create the manifest file before creating the jar file with class-path and main class

    Double post: [http://forums.sun.com/thread.jspa?threadID=5358017&messageID=10559776#10559776]

  • CR VS 2013 error: Additional information: Failed to load database information.

    We have VS 2008 (V9.0.30729.1 SP1) using .Net 3.5 under Windows Server 2003 R2 Data Center Edition. VS 2008 came with Crystal Reports Version 10.5.3700.0. We developed a little report in a winform to run against Oracle 11gR2 using the OLE DB support in the CR Report Wizard in the VS 2008 IDE. It was a standard report with some code to print the report directly to the printer with out the viewer control. Here is the working code:
    Imports System.Data.OleDb
    Imports System.Data
    Imports System
    Imports System.Windows.Forms
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Public Class Form1
        Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
            Dim crReportDocument As New CrystalReport1()
            Dim DataSet1 As DataSet
            Dim adoOleDbConnection As OleDbConnection
            Dim adoOleDbDataAdapter As OleDbDataAdapter
            Dim connectionString As String = ""
            connectionString = "Provider=OraOLEDB.Oracle;"
            connectionString += "Data Source=OURDBNAME;"
            connectionString += "User ID=OURUSERID;Password=OURPSW"
            adoOleDbConnection = New OleDbConnection(connectionString)
            Dim sqlString As String = ""
            sqlString = "SELECT * FROM edi_filing_source_lov where filing_source_code in ('A','E')"
            adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
            DataSet1 = New DataSet()
            adoOleDbDataAdapter.Fill(DataSet1, "edi_filing_source_lov")
            crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
            crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
            crReportDocument.Refresh()
            crReportDocument.PrintToPrinter(1, False, 1, 99)
            Me.Close()
        End Sub
    End Class
    We want to migrate this report to VS 2013. We installed VS 2013 Professional (V12.0.30110.00 Update 1) under Windows Server 2012 R2 Data Center Edition. We downloaded CRforVS_13_0_9 and installed it in VS 2013. We moved the project from VS 2008 and opened it under VS 2013. It looks like it converted OK. When we run it we get the following error:
    An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in CrystalDecisions.CrystalReports.Engine.dll
    Additional information: Failed to load database information.
    Error in File temp_f11eb1be-db98-4d33-800c-4db3b36ab14e {EEB2A9E4-8239-49CB-B016-8CE4F4C7643E}.rpt:
    Failed to load database information.
    More information: We can step through the wizard in VS 2013 using the standard template and add a report viewer control to the form and point it at the report and run it just fine in the VS 2013 IDE when there is no code in the form1_load event. We feel we have the Oracle.DataAccess.dll for the 11.2.0 client installed and tested correctly on the server and do not feel there is an issue with data base installation. When we add back the code above to the form1_load event and run it we get the error above.
    We have the logger set up but nothing gets added to the log files.
    We have tried three different ways to set the data source to resolve the error that is occurring at this line of code that is failing but with no luck:
    crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
    crReportDocument.SetDataSource(DataSet1)
    crReportDocument.Database.Tables(0).SetDataSource(DataSet.Tables("edi_filing_source_lov"))
    Do you have any other suggestions we could try?
    Bruce

    Hi Bruce
    In my experience, the only reason for the error is that the there is an issue with the dataset and as a back up sort of a thing, the report engine is attempting to connect to the database the report was created off of. To test the dataset with the report, see this wiki on how to.
    Also, ensure that you have a look at this KBA.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page

    I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page, or possibly in some sort of booklet format. Thank you very much.

    You can make a Book and have a photo on one side and your text description on the other.

  • Error on hover panel of people search result "We weren't able to find additional information"

    In people search result while hovering over all result item, in the hover panel in the middle I can see a message "We weren't able to find additional information".
    I saw a msdn post for the same question in this
    MSDN Link
    but there it is said that "If the person has no authored documents, then it will display this in the hover panel: We weren't able to find additional information."
    But for my case the authored document is also shown.
    Please find in the screen shot below marked in red:
    Did I missed something?

    Can you check for this issue in ULS Log file.
    If this helped you resolve your issue, please mark it Answered

  • Why can I no longer fill in additional information on my adobe forms on pdf. At time this was an opposition. It will only allow me to type limited information?

    Acrobat Reader
    Why can I no longer fill in additional information on my adobe forms on pdf. At one time you could insert an icon that would allow you to type in additional information. It will only allow me to put in limited information?

    Not a lot of information. Can you post a link to a sample of the form so others can see the how the form does not work.

  • Why can I no longer type in additional information on my pdf form. It will only allow me to type in limited information.

    Why can I no longer type in additional information on my pdf form. It will only allow me to type in limited information.

    Duplicate post.
    Why can I no longer fill in additional information on my adobe forms on pdf. At time this was an opposition. It will only allow me to type limited information?

Maybe you are looking for