DFM error in device allocation settings screen

New install of lms3.2 on windows 2K3
I see this error in the auto allocation settings
Error in getting instance of TreeGenerator class
com.cisco.nm.trx.kdm.utils.DcrGroupSelectorTreeGenerator
Root Cause:com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
The seed devices in DCR get into DFM but remain mostly learning
All the DFM processes appear to be working. Not sure where to start on this one.
In DFMLogServer.log I see this but not sure who tried to bind to what
15/Jan/2010 09:14:50:044 ERROR ? ? - Exception in registry server java.net.BindException: Address already in use: JVM_Bind
15/Jan/2010 09:15:20:700 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
15/Jan/2010 09:15:20:700 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
15/Jan/2010 09:15:20:700 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
I attached dfm logs in CSCOpx\log and the smarts logs
If anyone has got an idea what is going wrong here please let me know
Cheers,
Michel

Hi Joe,
Here is the output.
What are we looking for?
Cheers,
Michel
C:\Documents and Settings\Administrator>net stop crmdmgtd
The CiscoWorks Daemon Manager service is stopping...............................
The CiscoWorks Daemon Manager service was stopped successfully.
C:\Documents and Settings\Administrator>netstat -a -n -o -b
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    0.0.0.0:135            0.0.0.0:0              LISTENING       732
RpcSs
[svchost.exe]
TCP    0.0.0.0:445            0.0.0.0:0              LISTENING       4
[System]
TCP    0.0.0.0:514            0.0.0.0:0              LISTENING       1264
[crmrsh.exe]
TCP    0.0.0.0:1025           0.0.0.0:0              LISTENING       436
[lsass.exe]
TCP    0.0.0.0:3389           0.0.0.0:0              LISTENING       1824
TermService
[svchost.exe]
TCP    10.170.46.111:139      0.0.0.0:0              LISTENING       4
[System]
TCP    10.170.46.111:3389     10.170.102.79:31592    ESTABLISHED     1824
TermService
[svchost.exe]
TCP    10.170.46.111:7850     10.170.46.120:139      TIME_WAIT       0
UDP    0.0.0.0:514            *:*                                    1244
[crmlog.exe]
UDP    0.0.0.0:1028           *:*                                    796
Dnscache
[svchost.exe]
UDP    0.0.0.0:4500           *:*                                    436
[lsass.exe]
UDP    0.0.0.0:500            *:*                                    436
[lsass.exe]
UDP    0.0.0.0:445            *:*                                    4
[System]
UDP    0.0.0.0:69             *:*                                    1280
[crmtftp.exe]
UDP    10.170.46.111:137      *:*                                    4
[System]
UDP    10.170.46.111:123      *:*                                    816
W32Time
[svchost.exe]
UDP    10.170.46.111:138      *:*                                    4
[System]
UDP    127.0.0.1:123          *:*                                    816
W32Time
[svchost.exe]
C:\Documents and Settings\Administrator>

Similar Messages

Error publishing from Muse - "error updating device redirect setting"

After recent upgrade of Muse I am getting an error message when publishing. The pages are published correctly but there is an error which prevents the final completion of the process. message = "Error updating device redirect settings click resume to try again." it never works. What is up? is this a Business Catalyst error or a a Muse error?

I turned off the firewall, logged out from Creative Cloud and restarted my computer. After rebooting, I logged in to Creative Cloud, open Muse and connect to Business Catalyst without no problem,

PSC 2510 - Wireless setup - "Error while saving the settings to the device."

While trying to setup my PSC 2510 to be wireless I get an error message "Error while saving the settings to the device.". This comes after selecting connecting Through Network, selecting printer device, selecting WEP, entering key, and clicking next.
PSC 2510
Windows Vista
Using latest sfotware from HP to install
Thanks
Dennis
This question was solved.
View Solution.

ISSUE RESOLVED .. based on responce from PrintDoc to penn (refrence topic "C4385 Printer - Netgear DGN2000 - wireless setup".
PrintDoc responce helped me find my problem (to reset network settings on the printer to factory) even though diffrent printer.
Thanks

My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

Likely this:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation appearing rightside height is more than the left side. In reverse manner from the left side.

Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation bar appearing rightside height is more than the left side. In reverse manner from the left side. I dnt know whether it is default feature of iphone or not but i am really disappointed due to this. So please anyone help me in this issue and let me clear my doubt and make me happy. Thanks in advance.

I believe what you are seeing is an optical illusion when viewing the screen from the side. Try to align one of the one of the options in Settings, like General, with the navigation bar you'll see it does the same thing.
Hope that helps

HT1212 I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.What should i do ? Somebod

I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.And also ipad goes into same disabled postion.What should i do ? Somebody help please.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Some users have reported as many as 8 or 9 attempts were necessary before success.
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

LMS 3.2 DFM Import of Devices Failed

Hi,
My name is Ashley. I have recently installed LMS 3.2. Everything is working fine, CM, CS,HUM, RME,IPM. However, I am not able to import devices from DCR to DFM.
On Auto Allocation Window, I get the following error:
Error in getting instance of TreeGenerator class
com.cisco.nm.trx.kdm.utils.DcrGroupSelectorTreeGenerator
Root Cause:com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
On Manual Allocation, I cannot see any device in the DCR.
I have seen in a post how to reset the DFM database, but still does not work.
net stop crmdmgtd
cd CSCOpx\bin
del NMSROOT/objects/smarts/local/repos/icf/DFM.rps
del NMSROOT/objects/smarts/local/repos/icf/DFM1.rps
perl dbRestoreOrig.pl dsn=dfmEpm dmprefix=EPM
perl dbRestoreOrig.pl dsn=dfmInv dmprefix=INV
perl dbRestoreOrig.pl dsn=dfmFh dmprefix=FH
net start crmdmgtd
perl dbaccess.pl install
Could you please help, I am running out of ideas.

If the problem persists after a full server reboot, then you are probably not seeing this bug. Post the NMSROOT/objects/smarts/local/logs/DFM.log and DFM1.log as well as the brcontrol output after the full reboot.

Settings screen missing after 10.1 update

After 10.1 update my settings screen is missing. When I try to open settings anywhere from device it trys to open and quits immediately.
How can revert back to 10.0 now??
Also my phone is heating up and battery is draining fast when screen is on.
Any solution... Please help
Solved!
Go to Solution.

Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Now, try the settings screen again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Where is the documentation of the options on the 'System Services' settings screen?

The settings screen Settings ▸ Location Services ▸ System Services in iOS 5.0 contains the following boolean options:
Cell Network Search
Compass Calibration
Diagnostics & Usage
Location-Based iAds
Setting Time Zone
Traffic
I have never used an iPhone before and do not understand what each of these services do. Where can I find Apple's documentation of these options?

As I say, I've disabled all of them and see no need for any of them.
As far as I have been able to determine these are being used to build up location based databases for use in advertising, marketing and other commercial uses:
Cell Network Search - tracks the cell towers you are connected to and your location to aid in building up a database of cell phone tower locations and useage
Compass Calibration - this one I have no idea about. It is absolutely not necessary for the actual act of calibrating your compassapp, and your compass app works fine with it disabled. Why anyone would find it useful to know where I was when I had to calibrate my compass, I have no idea.
Diagnostics & Usage - this one is obvious, and is used to tag your location if you have chosen to send diagnostic and usage information to Apple. I can see where it might help them to know where you were when you had some issue (ie. so they could see if the area correlates with frequent network errors or such)
Location-Based iAds - also obvious, but I don't want marketers targeting me with ads based on where I am, I find internet advertising far too intrusive as it is, I have no desire to aid them in pestering me even more.
Setting Time Zone - this one I don't get. If you have data & time set to "automatic" this is pointless, as they date and time (and hence time zone) will be set by your devices connection to the cell tower(s). I have no rational thoughts as to what this being used for, or what good it may do.
Traffic - this is apparently somehow used to update a database of traffic patterns. How it knows what the traffic around me is, I do not know - ie. what triggers it, I have no idea.
Anyway, I have them all disabled, as I can see no rational reason to have any of them on. They just needlessly use up my battery, and are sending data to places that I have no idea of or about, for purposes I have no clue about, all of which, going by the complete lack of information about them, is by design (which just irritates me - at least explain the dang things or don't bother even including them).

Error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart"

I paid for & downloaded zagat to go app from handmark & it fails to run on my bb tour. Here is the error message I keep getting on my bb tour - "Unable to load screen : root. ChangeLocation.ChangeLocationStart". I've tried everything, including uninstalling and reinstalling the zagat app and I keep getting the very same error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart".
btw, I have plenty of free space on my device. HELP!!!
I tried Handmark support several times, to no avail. Thanks very much. mike

I'm having the same problem. Have tried uninstalling, reloading, nothing. Also read something about do not select Verizon as a carrier, but to use bizB, however on the 7. (new version) I'm trying to install bizB is not an option. Help please!

Connecting my ipad mini to my camera using the USB camera kit error message 'device is to powerful' keeps popping up.

I am trying to connect my iPad mini to my Samsung camera using the USB camera kit, I keep getting the error message ' device to powerful'. Is there anyway to fix this or do I need to take it back?? The shop assistant in Currys assured me it should work and it wasn't cheap at £25 for a tiny wire! I have read other posts concerning this but they are dated quite a while ago so just wondered what the newest advice was concerning this. Thanks

The camera is drawing too much power for your iPad. This can happen on cameras which charge their batteries using the USB connection. Make sure that you have the camera set to the correct settings for picture transfer - check the documentation that came with the camera.
Note that you can return the USB kit and get the SD card adaptor or get a powered USB hub if you can't get the camera to work any other way.

Error initializing server: IO Error: The device is not ready

Hi, I copied JDev 10.1.3 on my notebook and when I tried to start embedded OC4J I get the following message:
Error initializing server: IO Error: The device is not ready
What should I do? Thanks

If I read correctly, you just copy the existing jdev installation on your PC to your notebook. That sounds like a very dubious practice to me. As seen by you in this particular example, hard-coded non-relative paths, host information, environment settings and etc begin to creep into various configuration or preference files once a piece of software go alive.
Any problem to start a new installation to your notebook?

In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestion

In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestions?

Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

After updating my ipad mini retina to 8.1.2, my device experiences blue screen of death at random times.

After updating my ipad mini retina to 8.1.2, my device experiences blue screen of death at random times. It is so annoying plus there are applications that keeps on crashing such as brother in arms by gameloft so i have no choice but to reinstall it all over again.. But after quite some time the apps will crash again.. Argh it's a cycle. so annoying..

Hi It sounds like a bug. Go to settings iCloud backup over your WiFi Then Restore back to Factory Settings. After Restore use same Apple ID then you will get all your apps & data back. Do Restore over your WiFi. Since ios 7 Almost everything can be done over WiFi you don't need to use your PC. Cheers Brian

Browser stuck on Services and Settings screen

The browser for my Curve 8330 is stuck on the Services and Settings screen. The menu does not include either "go to" or "close" to get me out. And repeated removals of the battery have not solved the problem.
This has been a recurring problem, meaning I have escaped this screen but I can't recall how I managed it. I think a battery pull did work initially. That's not working now so I need other suggestions.

1. Make selective backup of your device data. Backup only data you need.
Check this link for step-by-step instructions: http://supportforums.blackberry.com/rim/board/message?board.id=8100&view=by_date_ascending&message.i...
2. Wipe the device memory, go to Options - Security Options - General Settings.
Open menu and select "Wipe handheld"
3. Restore on the device data saved at the step №1

DFM error in device allocation settings screen

Similar Messages

Maybe you are looking for