DFM@LMS4.0.1: lots of Voltage meassage from 10GE ports

Hello,
We got suddenly a lot of Voltage faults in DFM from 10GE ports at our VSS Core. Communication is not affected.
All other devices show voltage in a valid range and the VSS before this night as well.
An "shut / no shut" of the interface doesnt help, CLI confirms the problem, see below.
What does it mean? What can we do that this faults disappears?
fli_rie_core254#sh interfaces transceiver switch 1
Transceiver monitoring is disabled for all interfaces.
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
                                         Optical   Optical
            Temperature Voltage Current   Tx Power Rx Power
Port        (Celsius)    (Volts) (mA)      (dBm)     (dBm)
Te1/1/1       33.8       0.00      45.7 --   -1.4     -32.2 --
Te1/1/2       32.3       0.00      42.3 --   -1.5      -1.2
Te1/1/3       31.5       0.00      42.0 --   -1.5      -2.8
Te1/1/4       28.7       0.00      43.3 --   -1.4      -2.7
Te1/1/5       29.7       0.00      43.0 --   -1.5      -2.7
Te1/1/6       28.4       0.00      45.8 --   -1.4      -4.9
Te1/1/8       26.2       0.00      43.2 --   -1.4     -37.0 --
Te1/2/1       30.2       0.00      41.3 --   -2.1     -33.0 --
thx for help in advance,
Steffen

No,
Have your question something to do with the initiated discussion?
Von: cassiefang
Gesendet: Freitag, 17. Juni 2011 09:06
An: Neuser, Steffen
Betreff: New message: "[email protected]: lots of Voltage meassage from 10GE ports"
Cisco Support Community
Re: [email protected]: lots of Voltage meassage from 10GE ports
created by Shuo Fang in Network Management - View the full discussion

Similar Messages

Voltage out from parallel port

Hi there,
I want to use the parallel port to run a relay.
I do not understand the example given by labview. I also read the forum but I did not see what I am looking for.
I am kindly asking if some one can write a small program ( I use labview 8.5) so I can give a 5v out say to pin #2.
Thank you in advance

vlonjati wrote:
I do not understand the example given by labview. I also read the forum but I did not see what I am looking for.
I am kindly asking if some one can write a small program ( I use labview 8.5) so I can give a 5v out say to pin #2.
Please tell us more why you struggle, this is not good enough
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?

My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?

Update to iTunes 10.3.1
After you have finished, you can re download your iTunes purchases without having to re purchase.
iTunes 10.3.1
" Download Previous Purchases. Download your past music purchases again at no additional cost. Your purchases are available in the iTunes Store on your Mac or in the iTunes app on your iPhone, iPad, or iPod touch. Previous purchases may be unavailable if they are no longer on the iTunes Store."
"Available on iTunes in the U.S. and Canada only. Title availability is subject to change."
From here. http://www.apple.com/itunes/

Hi, I have a problem that I receive lots of Spam messages from my office, which are of no use for me. I am not in a position to bar the message from the service provider due to official constrains. I want to know if I can bar the message on Iphone

Hi, I have a problem that I receive lots of Spam messages from my office, I cannot bar the spam text from service provider due to official constrain.
I just want to know if there is any mechanisme where i can bar the message from a specific sender. I know there are some apps like Iblacklist available but we do not find it in any Iphone which is not jailbreak. I was just thinking of developing some code for it.

No. You can't. Filtering would have to be done at the server level.

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

Just got an iPod Touch and some of the artwork doesn't show up on my iPod. It seems that a lot of them are from the iTunes store. What should I do?

.

A lot of what are from the iTunes Store?
Your post doesn't make much sense really. Where did you get the songs from?
If you purchased them from the iTunes Store, then the artwork should have come with the song when you downloaded it.
But since you have not specifically stated that you have purchased from the Store, my question is have you downloaded songs from a different store or from yet another source? If so, did that source undertake to provide artwork?
Have you imported these songs from your own CDs?
MP3 files from other sources, such as (legally obtained) downloads from artist websites etc. do not always have artwork imbedded in them.
Amazon MP3 songs do have the artwork embedded. I assume other MP3 stores also provide the artwork. But then, assumptions are not always correct.
Songs that you import from your CDs do not have the artwork embedded in the CD version. The artwork is obtained for you by iTunes - if you have the setting turned on (see in iTunes, Edit/Preferences/General>>When you import a CD>>automatically download missing artwork) In this situation, if artwork is not supplied, it may be because iTunes doesn't have (legal) access to that artwork. In other words, they don't sell the album, so are unable to supply the artwork. In that case, a simple Google of the album should find the artwork which you can then copy into the album in iTunes.
As a last resort, I use my printer's in-built scanner to scan my CD cover and then paste that into the album's artwork box.
If I haven't answered your question, it's because you haven't supplied enough information.
Message was edited by: the fiend

MSC2n next inspection lot to be calculated from the production date

Hi gurus,
My query is
1. In Tcode MSC2n, next inspection lot is to be calculated from the production date and not from last goods movement date. is it possible to get next inspection lot to be calculated from the production date.
2. how to make automatic creation of inspection lot in SAP based on the next inspection date. Right not, it is being done manually using T-code QA07.
thanks in advance
regards
vb

To manipulate next inspection date use user exit QEVA0003.
To automatically create 09 inspection types use transaction QA05, schedule it to run in background at periodic interval

HT1711 I had a lot of music purchased from I tunes but now that I have a new I tunes user name and pass word I cannot retreive my albums from the purchased

I had a lot of music purchased from i tunes but when I changed my I tunes username and password I could not retreive my music that I previously purchased. What do you suggest.
Eleanor119

There are a lots of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. This is just a small selection of what's available some are commercial, some are donation ware. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
iRepo Mac and Windows
iPodRip Mac & Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows

Send UI meassages from teststand sequence to Simple CVI Operator Interface with Asynchronous Timer

Hello,
Is it possible and how is it possible to send UI meassages from a teststand sequence to the Simple CVI Operator Interface with Asynchronous Timer which could be downloaded from NI Hompage. I use this problems because it is more stable than the standard OIs
regards samuel

This post could help:
http://forums.ni.com/ni/board/message?board.id=330&message.id=7567
Regards.

I purchased lots of music yesterday from itunes and now i can't export to ipod because files are not found

I just purchased lots of music yesterday from itunes and amazon but now can't load onto ipod because files are not found.

elkelawdog wrote:
I think I had an old itunes id.
Either you did or did not. Do you not remember?
elkelawdog wrote:
But it never let me burn them to anything other than my Ipod.
Media is not burned to iDevices. Burning an iDevice would destroy it.
Why will iTunes not allow you to sync media to the iDevice? What happens when trying to sync media to an iDevice?
elkelawdog wrote:
I changed my password so now when I pull up my account there is no music.
Changed password to what?
Pull up what account?
What does this have to do with iTunes?
One does not pull up an account to access their media, they simply launch iTunes.
Changing a password has nothing to do with accessing the media on the computer when one launches iTunes.
What is the actual issue that is occurring?
elkelawdog wrote:
Can anyone tell me how to find my old account and then copy that music to my HTC One.?
iTunes has nothing to do with putting media on a non-Apple device.

Receiving lots of e-mail from Apple Discussion Forum

I'm receiving lots of e-mails from the Apple Discussion Subscriptions, but I am NOT subscribed. How to I stop these e-mails?
Thanks.
H

Hi H ,
Welcome to Apple discussions; )
Make sure that your "My Subscriptions" in the right sidebar have 0 next to all forums, topics & users etc.
Subscribed Categories: 0
No subscriptions to categories.
Subscribed Forums: 0
No subscriptions to forums.
Subscribed Topics: 0
No subscriptions to topics.
Subscribed Users: 0
Sometimes the software will experience a glitch and send out material you are not subscribed to.
See this topic and thisApple discussions search...
Hope this helps, some.
Eme'~[)
edited by: Eme

Is voltage change from 110 to 220 on my monitor HP f1905 automatic or do I need a transformer?

Is voltage change from 110 to 220 on my monitor HP f1905 automatic or do I need a transformer?

Hi,
It will convert automatically:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00655618&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

If I buy a lifeproof nuud case for my iphone 5 can I also buy a screen protector such as an amzer and use it aswell I have had a lot of screens break from little falls out of my pocket

If I buy a lifeproof nuud case for my iphone 5 can I also buy a screen protector such as an amzer and use it aswell I have had a lot of screens break from little falls out of my pocket

The Lifeproof case will provide reasonable protection from accidents and liquid intrusion. Screen protectors themselves provide essentially no protection, other than from minor scratches.
You can use the ones Lifeproof included, or less expensive ones. The cheapest ones you can find on the market are adequate. More expensive ones don't do anything better. Some can damage the glass, which won't be covered under AppleCare.
It's practically impossible to apply any of them without trapping a piece of dust.
None are really required.

Reviewing my bill i saw a LOT of text messages from a odd number sent to my number, BUT i never received them. Why would this be??

Reviewing my bill i saw a LOT of text messages from a odd number sent to my number, BUT i never received them. Why would this be??

Why did you give your granddaughter the password?
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

I'm working on DC Motor control using DAQ. There is sufficient voltage output from DAQ but not current. What should i do so as to drive the motor

I'm working on DC Motor control using DAQ. There is sufficient voltage output from DAQ but not current. What should i do so as to drive the motor. Could you suggest me appropriate driver IC using which this problem can be solved.
Saravanan.T

You really should use a DC motor controller to control a DC motor, look at the 754410 IC for a good example. You should be able to interface these to most DAQ devices.
Alan

DFM@LMS4.0.1: lots of Voltage meassage from 10GE ports

Similar Messages

Maybe you are looking for