DFRS on sysvol with windows server 2008r2 and windows server 2012r2

I currently have windows server 2008 r2 domain with forest and domain at 2008r2 full functional level.
The domain was originally 2003 full functional level.
I want to promote a windows server 2012 r2 system to a domain controller.
While doing some prep work I found that the sysvol relication has not been migrated to DFSR and is using FRS.
Will I need to migrate to DFSR before promoting the 2012 r2 DC or can that wait?
Thanks.

Hi,
To install active directory in Windows Server 2012 R2 you must just be sure that the domain functional level and forest functional level is 2003 or higher. you don't need to migrate Sysvol system replication to DFSR.
When you install the first domain controller in Windows Server 2008 or higher and choose the domain functional level 2008 or higher, the replication system used by Sysvol will be DFSR automatically.
On the other side, if you domain functional level was 2003, to apply DFSR for Sysvol replication you must raise the domain functional to 2008 or higher, and launch dfsrmig
to complete the migration t get more details look at the link below:
SYSVOL Migration Series: Part 1 – Introduction to the SYSVOL migration process
Best regards Bourbita Thameur Microsoft Certified Technology Specialist: Windows Server 2008 R2,Server Virtualizaton

Similar Messages

Server 2008r2 and windows 7 pro slow to no networkshare file searching and file access (green progress bar)

we are running a windows server 2008r2 sp1 domain controller and a 3com gigabit switch to which 7 windows 7 pro computers are connected. We are only using the windows server to distribute a few printers and as a network share (z drive).
we are storing all files (word documents only) centrally on the server (z share), and files are accessed and written to the z share.
Problem is that file access from the z share on the windows 7 client computers is at best buggy. we are able to browse the z-share, but as soon as we want to search the z-share for files (f.i. use file explorer with "content: memorandum") the green
progress bar shows and no search is performed. something like alphabetically sorting a directory on map/file name on the z-share also shows a green bar with no sorting. manually going to the files works.
One thing i noticed, sometimes not all files that one user created and stored on the server is visible and can be found by another user. I prefer to disable all offline file caching setting, because that feature is not used. no files should be made accessible
offline. i don't know where to change that on the server side.
I am reluctant to experiment on the server end (2008r2 sp1), so i tried a few suggested solutions on the client end (windows 7 client)
I tried disabling offline file caching
i tried properties (z share) ==> advanced and map optimizing and several options there
i tried disabling the smbv2 protocol and disabling the smbv1 protocol (using
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi command etc. posted by microsoft)
i tried disabling windows defender
i tried accessing the z share via ip and server name (the share is mapped via its servername, e.g. dennis-dc1\share). still the same
file searching on the clients c drive ('own harddrive') works much better, file searching on the server also works.
any suggestions or solutions that i can test on the client side, as mentioned i am reluctant to change something on the server side. if a solutions works, i prefer to change it on the server side.

Hi,
The issue could be due to windows indexing service taking long time in sorting and searching in mapped drives. Please try the steps belwo to disable windows indexing service or search service on the windows 7 client to resolve the issue.
You can click on Start and select Control Panel, click on
Programs and Features, go into the Turn Windows Features on or off section Scroll down the list and uncheck the box next to Indexing Service or Windows Search.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Server 2008 R2 with WSUS need to specify location for Feature install for Server 2012 and Windows 8

Having a problem where we need to add .net 3.5, amongst other things, in server 2012 and windows 8.1. We're using WSUS on server 2008 R2, so when I go to add roles or features, I'm not able to as it tries to use Windows Update but it's set to use WSUS.
I'm aware in server 2012 gpo's that you enable the policy 'specify settings for optional component installation and component repair' in Administrative Templates>System, however that setting is not available in Server 2008 R2.
I've downloaded the templates from http://www.microsoft.com/en-us/download/details.aspx?id=36991 but the setting is still not there.
Any suggestions on how to do this/allow feature install with Server 2008 R2?

Hi,
To upgrade the Administrative Templates, please run the downloaded msi file, then copy the needed admx files and adml files to the PolicyDefinitions folder.
For detailed information, please refer to the link below,
Managing Group Policy ADMX Files Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc709647(v=WS.10).aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle

Hello:
I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
I also would lile SqlPlus installed on the server.
I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
Thanks

Hi,
Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
For detailed information about all supported platforms, we have the following link for your reference:
www.service.sap.com/smb/sbo >product availability > supported platforms.
Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
Platforms not mentioned in this documentation are not supported.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

Can't record web session in Web Application Transaction Monitoring using IE10 (Tried under Windows Server 2008R2 and 2012)

Hi,
In Operations Manager Console 2012 SP1 including RU2 I am trying to record a web session in Web Application Transaction Monitoring.
I have check that:
The add-on (Microsoft Web Recorder Helper) 64bit is Enabled.
The 64bit version of IE10 is running/launched. See this link for how to modify your registry key if needed: http://kevingreeneitblog.blogspot.co.uk/2012/01/scom-2012-recording-web-browser-session.html
I have tried both on a Windows 2008R2 and 2012 server, but the recorder is not showing up as can been seen from Kevin's Blog (link above).
Any Ideas?

I managed to get this working on both Windows 8 IE10 and server 2012 IE10. Tested on SCOM 2012 SP1 UR2 and UR3. I've done this process in lab and production several times so hopefully this helps you out.
Checklist:
1. Ensure that the 64bit IE10 is launching when the "start web-capture" is started in SCOM.
2. Enable IE10 internet options:
a: Advanced - Security - Enable Enhanced Protected Mode
b: Advanced - Browsing - Enable third-party browser extensions
3. Close all running IE sessions and open the Registry Editor
4. Registry Change (No reboot needed)
- Browse to the following regkey:
HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main
- Add a new DWORD called TabProcGrowth and set it to 0
5. Registry Change (No reboot needed)
- Browse to the following regkey:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Discardable\PostSetup\Component Categories64\
-You should see two subkeys labeled: (These are the cached BHO IE objects related to the Web Recorder)
{00021493-0000-0000-C000-000000000046}
{00021494-0000-0000-C000-000000000046}
- Delete only the above two mentioned keys (This will force IE to recache them next launch)
6. Try to start the web capture again from SCOM 2012 SP1.
7. When IE10 Launches enable the add-on again if you are prompted.
8. If you still don't see the Web-Recorder pane in IE you can now show it by:
- View - Explorer bars - Web Recorder

Hyper-V on Windows 2008R2 Running Windows 8.1 and Windows Phone

I am a lone wolf developer running Hyper-V on a legally-licensed Server running Windows Enterprise 2008R2. I have extremely limited research funding.
Since I need to evaluate Windows 8.1 and Windows Phone development for the 1080p Phone Emulator, I created a Virtual Machine of Windows 8.1 Evaluation Copy RTM on my server. I am trying to create software for the Nokia Lumia 1520 Phone-Tablet.
Everything in the Windows 8.1 Virtual Machine runs perfectly from Hyper-V on Windows 2008R2, except for one problem related to my Phone development project. Networking is perfect, the display is perfect, there are no other issues except this "gotcha".
The problem appears with the Windows Phone SDK Update 4, which supports a 1080p
Windows Phone Emulator. This emulator is supposed to load it's own instance of a Windows 8.1 Hyper-V virtual machine
when debugging the Phone Application from Visual Studio 2012 Express.
This Emulator tries to start it's own Hyper-V session inside Windows 8.1. In my humble opinion, it should be possible to do this (load a Windows 8.1 HyperV Virtual Machine inside a "parent" Virtual Machine).
It presents this error message instead:
Essentially, Windows 8.1, running in a Virtual Machine, should also be able to create a Virtual Machine inside it's own Virtual Machine. That is the required design of the Phone Emulator (must be able to intantiate a Windows 8.1 Hyper-V Virtual machine to display
the Phone).
If that does not work, then I guess it must not be a supported configuration. If not, then I need to licence Windows 8.1 on a separate physical computer. Anyone want to tackle this?
+__+

I have a legal, licensed Windows 2008 R2 Server with the Hyper-V Role. I then downloaded the time-limited
Windows 8.1 RTM Evaluation Version and successfully installed. It works flawlessly. Next, I installed the
Windows Phone SDK Update 4 on top of
Visual Studio Express 2012 for Windows Phone.
It all works flawlessly, except for one little problem.
Since I am interested in evaluating and testing the Windows Phone SDK 1080p Emulator, I must run
F5 - Start Debugging in Visual Studio in order to see my Windows Phone application in 1080p resolution. Well, the Emulator
almost completely starts up successfully, but at the last push it gives an error. This error is shown below as a JPEG.
Does anyone know which of the "Hyper-V components is not running?"
+__+

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista

I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
Or, am I just misinterpreting this?
Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
Daddy-O
One should welcome adversity as an opportunity to excel.

Hi Daddy-O,
Thank you for contacting National Instruments. This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable. In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver. This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward. Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here. From this installer, you should be able to select FieldPoint 6.0 and install this software.
I hope this helps! Let me know if there is anything else I can clarify. Have a great day!
Jason W.
National Instruments
Applications Engineer

How to have Snow Leopard, Mavericks with built-in recovery, and Windows 7 (Bootcamp) on my iMac (Intel)?

I would like to have Snow Leopard, Mavericks with built-in recovery, and Windows 7 (Bootcamp) on my iMac (Intel). Is this possible? If so, how? Currently, I have Snow Leopard and Windows 7 (Bootcamp) running on my iMac. I have enough disk space to split my Snow Leopard partition. I have read that if I split my Snow Leopard partition, clone my Snow Leopard partition to the new partition, and boot to the new partition, that I may have problems with the Maverick's upgrade because it may not be able to create the recovery parition, or that it may erase the Windows partition, or that it may mess up the Windows boot process.

Simplest is to install Mavs on an ext HD, using FW or TB. I don't do windoze, so can't advise about the Boot Camp and multiple volumes issue. Since there's no Boot Camp, I have four volumes running SL through Mavs.

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Is there a 32 Bit edition available for windows server 2012 and windows server 2008

Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
Ahmed

Hi,
Quote：
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SOUND MUTING WITH XFI FATALITY TITANIUM AND WINDOWS 7

5SOUND MUTING WITH XFI FATALITY TITANIUM AND WINDOWS 7z Ok sorry if this hasbeen covered before but I searched and couldn't find it so here goes:
I have a two month old XFI FATALTY TITANIUM CARD WITH THE FRONT PANEL BREAKOUT BOX.
It showed up staright away as a hi fi device and the optical output when selected works ok I dunno about surround sound it simply plays great stereo through my Arcam DAC connected up to my stereo.
Problems began when I decided to install the Creative Software. What happens i sit plays for maybe o mins then mutes also I primarily use i tunes and it wont play anything until a few seconds after the music starts.
This is just on optical out if I use standard phono to 3.5mm jack its fine.
What puzzles me is why this happens when using the creative software ? Reverting back to the pre creative software it plays fine I would just like to take advantage of the various functions suplied with creative software?
Any ideas please. FWIW I Completely deinstalled the card and installed? abasic CMI 8738 card and that does the same so maybe its windows 7
Oh spec wise Windows 7 32 bit
4GB RAM
Asus MOBO

Weird... I changed nothing and yeterday it worked...
I just understand this, but what the hell?

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Frequent Fails when installing Adobe Flash Player (Windows XP, Windows 7, Windows 8.0, and Windows 8.1)

Constantly see the following error message from Adobe Flash Player Installer:
Error has been encountered. Close this window and try downloading again.
What in heck does that error message mean?
This message occurs most of the time when I try to update to the latest version of Adobe Flash Player.
It would be one thing if it was only occurring on Windows XP, but it shows up on Windows 7, Windows 8.0, and Windows 8.1 frequently.
Just for curiousity looked at the Windows 8.1 Event Viewer and NO error message shows up there.
Would be nice to:
(1) know what the error really is so that it can be reported to you to get it fixed once and for all.
(2) have Adobe Flash Installer NOT to delete itself every time that the installer is run.
(3) have an OFFLINE download installer to download and install Adobe Flash Player without the MacAfee installer.
(4) have Adobe UNCHECK that the Install MacAfee installer that you have to opt out of each time you do an Adobe Flash Player download. You should make it to OPT IN not OPT OUT! Don't need another program installed without my permission. This causes issues when I have to uninstall MacAfee on computers that others in my family use.
It seems to takes up to 20 times to download the Adobe installer over a period of many days or weeks to get it to install properly.
I have written software for over 36 years as a computer programmer and now Senior Software Developer. I have do installers on my own and have to figure out how to solve my own issues on the installers to get them fixed.
This issue doesn't seem to be tied to any particular version of Windows... Same issue occurs on Windows XP, Windows 7, Windows 8.0, and Windows 8.1! The ONLY commonality seems to be Adobe Flash Player.
Certainly Adobe should be smart enough to fix this issue once and for all.
If the issue is that there is a network congestion error that it cannot download the installer, please say so and please please please DO NOT delete the downloaded installer every time that it is run on a PC.
I'd like to fix the security issues with the Adobe Flash Player AS SOON as there is a patch for it. I don't like having security issues over a long period of time.
Please address this issue so that I can put this to bed and not have to keep sending you messages that once again the Adobe Flash Player Installer is yet again broken!
Certainly you have a staff at Adobe that CAN fix this problem quickly!

more information about errors can be found in the FlashInstall.log file in C:\WINDOWS\system32\Macromed\Flash (and the SysWOW64 equivalent on 64-bit systems)
the offline installers (below) do not delete themselves
you can find the offline installers
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
the offline installers are not bundled with any 3rd-party crapware

DFRS on sysvol with windows server 2008r2 and windows server 2012r2

Similar Messages

Maybe you are looking for