DFS files never Show up at destination

Hi I have a server RJC-VAN01 which should be replicating 6 folders to RJC-TOR01. The files haven't shown up on RJC-TOR01. From generating a health report it shows that the status of the replicated folders are "Indeterminate" and there is an
error on Backlogged Receiving Transactions
Checking the event logs of RJC-VAN01 I get an event ID 5004 saying "The DFS Replication service successfully established and inbound connection with partner RJC-TOR01 for replication group CitySeverEngineerTemplates."
Earlier in the event logs I do have an error with Event ID 5008 saying "The DFS Replication service failed to communicate with partner RJC-TOR01 for replication group CitySeverEngineerTemplates. This error can occur if the host is unreachable, or if
the DFS replication service is not running on the server." It also says Error: 1722 (The RPC Server is unavailable).
I have tried turning off the firewall on both RJC-VAN01 and RJC-TOR01 without result. I also checked the DFS services on both servers and they are running as expected. RJC-CAL01 which is another server in the replication group has
received the files fine so I'm thinking its related to RJC-TOR01.

Hi,
The issue may due to a dirty shutdown, then the replication will stop. You can sync data by the recovery process.
For more detailed information, please refer to the links below:
What would happen if we resume DFS Replication after paused for a month
http://social.technet.microsoft.com/Forums/windowsserver/en-US/53fafabe-8680-495f-9ccd-384dbd8bb18f/what-would-happen-if-we-resume-dfs-replication-after-paused-for-a-month?forum=winserverfiles
DFS replication status indeterminate
http://t-solve.blogspot.com/2013/07/dfs-replication-status-indeterminate.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

SDM File Never Showed Up

I am downloading Windows 8.1 through DreamSpark and according to the SDM the file is 100% downloaded. However, when I look in my downloads folder (I never changed the download location) the file is not there. What is going on?

Secure Download Manager posts are off topic for the MSDN Subscriptions Feedback forum. Students having issues with the SDM should email [email protected] and be sure to enter “SDM issue” on the subject
line of their message. SDM Issue emails must include:
Order #
A detailed description of the problem, including steps taken and error message. Screenshots are
highly preferred.
DreamSpark Students having any other issue with the service need to get help from their Program Administrator. Contact the Program Administrator by clicking the help link at the top of the student Webstore, and then
scrolling down to the bottom of the page and clicking Contact Us.
If you have any questions about the above, please reply to this thread.
Thanks, Mike
MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

When I move files to trash,the bin is empty. My files never go there. Its always empty???

I really need help bad here!!! When I move files to trash,the sounds play...but the files never show up in the bin. It still has the empty look and is very empty. Its been doing this for a few weeks. Its getting very fustrating. Can anyone help me here? Looking forward to getting this issue resolved soon! *crosses fingers*

Go to the Finder - click anywhere on your Mac's desktop, and choose File > New Folder.
If a folder appears on your Desktop then you can ignore the reference to the house icon.
Continue from where he wrote "open the Terminal in the /Applications/Utilities/ folder "
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
In the Terminal window, you will do something like this
Last login: Wed Feb 12 03:21:53 on ttys000
Johns-iMac:~ john$ mkdir ~/.Trash
mkdir: /Users/john/.Trash: File exists
Johns-iMac:~ john$ sudo chown $UID ~/.Trash
Password: (type your password then press Return)
Johns-iMac:~ john$ chmod u+rwx ~/.Trash
Johns-iMac:~ john$
You will be typing the entries in red exactly as shown. Press the Return key at the end of each line.
Quit Terminal.
Drag the folder you just created to the Trash and confirm that it appears in the Trash.
Empty the Trash.

Never showing my file and folder in desktop also..

never showing my file and folder in desktop and hardisk also....how to fix that....

See http://download.oracle.com/javase/tutorial/uiswing/components/list.html especially the part about the wrap modes and the list renderers.
For icons look at http://download.oracle.com/javase/6/docs/api/javax/swing/filechooser/FileSystemView.html#getSystemIcon(java.io.File) though I don't think it supports different sizes so you'll have to scale yourself.

I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for

I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
 Cheers, Tom

Video files not showing up in FR

Hi all, this is my first Mac. So far I'm loving it, God only knows why I didn't make the switch sooner.
Most of my video-library consists of the following video file types; .avi, .mov, .mpg and .mpg.
Reading some topics, I found that as long as QT could play these files given the proper codecs, FR would have no problem playing them, too.
So I looked around and found out about Perian - worked to perfection, QT can now play all files.
Problem is, when I place any type of file, including .mov's, in the proper Movies folder it does not show up in FR. The only way I can get files to show up in FR is to add them via iTunes, and the only files I can add to iTunes are .mov's and .mpg's.
Does anyone know why my Movies folder is not "in sync" with FR?

There you go. The other user short name! I never tried that, because I assumed the Movies folder that was in the sidebar from default would be the one. But yeah, all I did was create a Movies folder in the user short name (since there wasn't one to begin with) and voila! Thanks a lot!
And about making saves as reference movies - thanks for that advice, it's been very helpful in getting me started organizing my digital video library.
Still have some qualms about FR, though. The way videos are organized ... been playing with it for several hours today and here are some of my issues:
I like to keep my stuff organized ... I like the fact that I have the option of using either FR or iTunes (cover flow), so that's the route I'm taking using both. Already, things get complicated.
My video media is basically in three groups: movies, TV shows and music (music videos, concerts, etc.).
First off, I've decided to use the FR-designated Movies folder only for saved movie references. This is to avoid clutter, so the actual files are not in the Movies folder. Is this a wise idea? I'll tell you the basis for this decision.
When I first started organizing the files I found that any video placed in the Movies folder shows up in FR under .... yup, Videos->Movies. Be it music videos or anything TV shows. I don't like that. For everything that's not categorized as a movie, I'd like for those files to end up in their proper sub-menu in FR, but they don't. In iTunes, they are all in their proper place, because I've edited all the info so it looks neat and orderly.
Is there a way around that? What I've done to make it seem cleaner, is in the Movies folder with all the saved reference movies, I've organized it like this:
(user short name)/Movies/
- Movie A, Movie B, Movie C
- Other (folder containing all non-movies video files)
So all the files in Other has been correctly arranged via iTunes, so these files show up in the correct sub-menu in FR.
What I mean is that they show up twice in FR, once because they're in the Movies folder and then another time (this is what I want), because I've directed them to a specific category via iTunes, e.g. music videos. I only want them to show up once, not in sub-menu Movies of FR, but either TV Shows or Music Videos ... make any sense?
Please don't tell me it isn't possible, or maybe advice me a better way to organize it.
Also, I'm having trouble getting some files to play. They play fine in QT, but if I change some info in iTunes they won't play in FR ... and the preview thumbnail is just black.
And lastly, wow ... there is a lot of load time, when you start FR up ... it's weird, sometimes there is none, sometimes I'll have to wait two minutes once I've gone by the main menu. I thought using saved movie references would help the load time, since the actual library is not in the designated FR-folder.
That's basically it for now ... 1) organizational troubles 2) playback troubles and 3) load time.
So far, you guys have helped me solve my issue, hope you will again!
Love Mac!

OBIEE : Newly created rpd file not showing in the online mode in Admin tool

Hi,
I have recently installed OBIEE 10.1.3.4.2 and Oracle XE databse in a Windows XP (Professional version 2002 Service Pack 3) virtual machine on my Windows 7 machine.
1) I have create an rpd file in Admin tool (all three layers). But I can only load this rpd file in offline mode, not in online mode.
a)Saved the file sanjay1.rpd in c:\OracleBI\server\Repository directory
b)Updated the c:\OracleBI\server\config\NQSConfig.ini (commented out the existing Star entry and replaced it with Star = sanjay1.rpd, DEFAULT;),
c)Modified the C:\OracleBIData\web\config\instanceconfig.xml and made change to the CatalogPath entry (<CatalogPath>C:/OracleBIData/web/catalog/sanjay1</CatalogPath>)
d)Stopped and restarted OC4J, “Oracle BI Presentation Server” and “Oracle BI Server” services.
But I am still not able to load sanjay1.rpd in the Admin tool in the online mode. It is showing up only in the offline mode. What do I need to do load the file in the online mode.
2)The existing Start entry in NQSConfig.ini was Star = samplesales.rpd, DEFAULT before I updated it. But samplesales.rpd is not showing up in online mode either. When I am selecting File/Open/Online a popup is coming up with title "Open Online AnalyticsWeb" and prompting to enter Administrator password. I would like to know why samplesales.rpd was not showing up in online mode and where is AnalyticsWeb coming from.
Thanks
Sanjay

Dear Muram,
Is did not work.
1)Wihile the servers were running I opened the rpd in offline mode. It displayed the message the file can only be opened in the Read-Only mode. I accepted the message, opened the file and clsoed it and exited from Admin tool. I stopped the 2 services “Oracle BI Presentation Server” and “Oracle BI Server” in that order, and restrated them in the reverse order. In the admin tool it is still showing in the offline mode only
2)I have as such no interest in AnalyticsWeb that is showing in the online mode. I did not create it, it must have been installed along with OBIEE. But I am curious where it is coming from. Because A)There is no rpd file for AnalyticsWeb in the Repository Directory B)Before I edited the NQSConfig.ini the default setting was samplesales.rpd. So AnalyticsWeb was never included in the NQSConfig.ini file C) samplesales.rpd was included in the NQSConfig.ini once, but it never showed up online.
Thanks
Sanjay

Hundreds of Identical Files & Folders Show In All Spotlight Searches

Hundreds of Identical Files & Folders Show In All Spotlight Searches
Hi,
I had this issue posted in September and didn't get back to it 'till today so I found it archived. I don't think I got any answers the first time around. When a post is archived, are replies archived also?
Here's the problem:
Spotlight works for me the way it’s designed to work. It finds what I’m looking for if the item is in the computer.
But what are showing up in most of my searches, are long columns of files, all with the same names, sometimes as many as forty or fifty identical items. These files have the same dates and sizes. Some are located in different folders, including Trash, but most are complete duplicates
I do occasionally save as the same document in different places, or make a duplicate/copy to put in more than one location. But I have never created more than a few duplicates. In Spolight, there are hundreds
Any suggestions?
Rafael
ibook g4 Mac OS X (10.4.7)

I rebooted the machine. Now all the files show up in Finder. But when I repeat the exporting procedure I get the same problems again. Files are not showing up in Finder as they are supposed to.

HT4796 The PC never showed the passcode that was displayed on the Mac. Waited for an extremely long time and it never displayed the code on the PC. What gives?

I installed the OS X Lion on my PC, and opened the migration assistant on my Mac. While the passcode was displayed on the Mac, it never showed up on the PC. The PC just kept scrolling across saying it was trying to connect. What must I do to transfer my files from my PC to my Mac?

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

I am having trouble with my security questions, I want to change them, so it says that it sent me an email to change it but it never shows up, so I can't buy anything now?

I am having trouble with my security questions, I want to change them, so it says that it sent me an email to change it but it never shows up, so I can't buy anything now?

This issue was resolved! I didnt think about restoring my computer to factory settings but I did and now my computer works like brand new. basically, just back up your files and do the following:
http://www.youtube.com/watch?v=yPmT5Xbb8p0

Exporting using Quicktime - but file never appears??

Ever since I downloaded the latest iMovie '11 software update (9.0.7), every time I try to export using Quicktime, it takes two hours to export, shows no error messages of any kind, but the exported film NEVER shows up where I saved it to (or anywhere else on my computer). Has anyone else had this problem?
I can't export using any of the other options because the film is so large (the Quicktime export compresses it enough to upload to Vimeo, while exporting it straight to Vimeo does not). The Quicktime export (and all the settings still in place) worked perfectly before I installed the 9.0.7 update.
I need to get this film off my computer pronto. Please help???

Hi Mike:
Apologies for the long delay in response; have been working on other things of course.
I don't know how to use OS X's postscripting feature, but I did try and succeeded in creating a .ps file. When I try to open the file, however, it tells me there is a postscript conversion error and the file cannot be converted to pdf.
Manually distilling the file is exactly where the problem arises.
For giggles, I tried to select the OS X's pdf'ing feature instead of postscript or distilling, and it worked instantly! The dimensions are correct when I open it up, and the file size is large enough to indicate to me that the resolution is likely sufficiently high. I would not know for sure of course until finding out the hard way after sending it to the printers, but it seems to be a use-able file.
So, it seems that this is a pseudo-solution, at least so that I have a tool to bypass the problem when I next encounter it; however, I wonder if you have any ideas about how to actually fix the glitch? Does it have to do with the sorts of images that reside in the KeyNote file; if so, which file types does pdf not like and should be avoided?
Thanks,
Heide

I HAVE AN ACER COMPUTER. IT HAS WINDOWS 7. I USED TO HAVE ADOBE FLASH. I TRY TO REINSTALL AND GET THE MOST UP TO DATE VERSION. IT SAYS IT IS COMPLETE BUT NEVER SHOWS UP ON MY COMPUTER.

WHY WON'T IT INSTALL ON MY COMPUTER? I USED TO HAVE IT.

Hello,
What do you mean by 'never shows up on the computer'? Flash Player is a browser plugin and works in the browser, not outside, unless you have a SWF file you want to open, in which case you'll need the Flash Player projector.
What browser are you using? If you launch the Control Panel and go to Control Panel\All Control Panel Items\Programs and Features do you see Adobe Flash Player listed?
Maria

MAS never shows updates and never updates apps

Hi,
Mac App Store never shows update notifications for me. When I change to the Updates menu I get 'All apps are to update'. When I change to the Purchased I get some of the buttons as 'Update'. And then, when I hit the Update button, applications never get to update as I get an error "There are updates for other users...". The only way to update the apps is to first remove them and go back to MAS and select install.
That's happening from the very first time I've installed the AppStore.
I've tried to install again the combo update, I trashed all plists, caches, cookie files etc... and nothing helped.
If anybody has the same did he manage to solve it?
Thank you guys!

Why are you directing folks to a Knowledge Base article about iOS apps? That article has nothing to do with the Mac App Store! That article is about downloading apps purchase through the iTunes Apps Store.
cvkef, ignore that post, it has nothing to do with the Mac App Store, nor with your problem in the MAS.
The MAS is still very much a work in progress. It is a part of Mac OS X Lion that was released early for Snow Leopard, but in is still very much like beta software and the Lion development team is still working very hard to get it ready when Lion rolls out later this Summer. Your work around of deleting apps to get an update is probably what you will need to do for the next little while until that part of the MAS is fixed.Be patient. And if you feel strongly enough, give Apple feedback, becasue you are going to just find other users here in the ASC.
Give feedback for the Mac App Store at this moment through the Mac OS X Snow Leopard portal, the MAS does not yet have a separate portal;
http://www.apple.com/feedback/

Why I can not show a Movie from my PC (VAIO Windows Vista 64Bits) to the Apple TV....I am able to see the PC from the Apple TV, but when I click on Show Library, it says " Changing Library from PC Victor Medellin"...but never show it...

When I go to AppleTV, I select the PC and click on it...It start to open the Library, sending a messege "Charging Library from Victor Medellin" (the name of my PC) but never show it. It send a messege " Check the Apple TV is on the same net and iTunes is turned on on PC..:" but everything its ok.. I have tried with my wife´s PC and there is no Problem...
If I click play in a Movie and try to select the Output APPLE TV, it still thinking and never send neither the Image nor sound....What i have to check???

Hi adtsalmon,
You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Here's the link to the Movie Rentals FAQs site FYI:
http://support.apple.com/kb/HT1657
Hope this helps!
Cheers,
GB

External Drive Files Not Showing Up on Mac but files do shows Up on PC

External Drive Files Not Showing Up on Mac but files do shows Up on PC
i had the Ex HD for about 3 years running smoothly on my mac but recently everything disappeared. plunged it into a pc to see if it read my files and it did. what can i do? to make it work on mac again. i don't want to reformat that drive because i have important applications (DMG) and other zip photo video files in the drive.

yes. i did.
...i have tried "verify" & "repair" but they didn't pass the san test. and when i "unmounted/mount" a error message popped up say that there is a application running off the drive but there nothing (i see) running, to close all activity

DFS files never Show up at destination

Similar Messages

Maybe you are looking for