DFS Replication for one group only not working

I have 2 DFS Replication groups and each group contains the same 2 member servers.
One group is set to replicate one drive pair between these members, and the other group is set to replicate another drive pair between the same member servers.
Replication works perfectly for one group / folder, but it does not even start on the other group.
This proves that there is no problem with the connectivity between the members, or to the AD.
The DFS Replication Health Report for the group that does not replicate shows no error, just 2 Warnings:
WARNINGS (2 servers with warnings)(Show All)
BOG-RODC (1 warning)
Reference member returned no replicated folders.
MTL-HV-FS01 (1 warning)
This member is waiting for initial replication for replicated folder BOG-RODC_D_Drive.
This is very weird, I don't see why it does not replicate, I'm pooling my hair out. Please help
Titus

follow up on the above issue: Yes I did delete the group, and DFSRPrivate folder and recreated the group again, but this did not help.
Problem has been fixed by Microsoft, I had to open a case with them. Apparently the Jet database that's hidden in the "System Volume Information" was corrupted, so not only he deleted the group, but did the following, changed permissions/ownership
to access the System Volume Information, then:
D:\>cd "System Volume Information"
D:\System Volume Information>cd DFSR
D:\System Volume Information\DFSR>dir
Volume in drive D is Data
Volume Serial Number is F4CD-B05B
Directory of D:\System Volume Information\DFSR
10/10/2014 11:09 AM <DIR> .
10/10/2014 11:09 AM <DIR> ..
10/02/2014 12:01 PM 0 $db_normal$
02/04/2015 10:14 AM <DIR> Config
10/10/2014 10:49 AM <DIR> database_E6F4_CDDD_F4CD_B05B
10/02/2014 12:01 PM <DIR> Private
1 File(s) 0 bytes
5 Dir(s) 1,558,208,782,336 bytes free
D:\System Volume Information\DFSR>rd database_E6F4_CDDD_F4CD_B05B /s /q
D:\System Volume Information\DFSR>dir
Volume in drive D is Data
Volume Serial Number is F4CD-B05B
Directory of D:\System Volume Information\DFSR
02/04/2015 10:20 AM <DIR> .
02/04/2015 10:20 AM <DIR> ..
10/02/2014 12:01 PM 0 $db_normal$
02/04/2015 10:19 AM <DIR> Config
10/02/2014 12:01 PM <DIR> Private
1 File(s) 0 bytes
4 Dir(s) 1,558,344,138,752 bytes free
Then as usually recreated the replication group. I haven't seen this information anywhere on the web or in the Microsoft site.
Hope this will help other people having the same problem as myself. Proceed with care.

Similar Messages

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

Language specific replication of material group description not working SRM

Hi All,
We have backend R/3 MM system from which we replicate our materials,material groups. For Italian language the replication of the material groups description is not working. Though the description is available in backend R/3 system when i run the DNL_CUST_PROD1object in R3AS tcode, there is no replication log in SMQ2 but still the Italian language is not replicated into SRM.
There are no logs in SMW01 tcode also.
Please suggest.
Best regards,
Sam

Hi,
As david explained,you need to set the filter for the LANGUAGE field in trascn R3AC3 before replicating the product categories.
In R3AC3 select DNL_CUST_PROD1. Go to table structures tab . Click on the filter next to T023T table. This will take you to the filter tab. Select source site name and filter options. In the field put "SPRAS", in op put "EQ" and in low value the value 'IT"(for italian) . You can also describe a range here instead of individual material group numbers.
BR,
Disha.
Do reward points for useful answers.

Value help does not work for ONE person only !

Hi,
we have a strange problem. In the Web IC, we are using a standard value help for the country field for a Business Partner. This works fine for everyone (ie, it picks up the country and slots it into the field) except one person. For her, it never returns any value into the country field. We are guessing that it's not Web IC related but is something in her browser settings etc...but haven't been able to pin it down. Can anyone offer any advice on this ?
thanks for looking.
Malcolm.

Hello Malcolm,
If this error occurs for one user only it's definitely related to the clients PC.
Did you already delete all temporary files and the cookies on that PC? Usually this does the trick!
If this does not solve the problem, try to let that particular user login on another PC where the problem does not occur. (If the error does occur on another PC too it's probably profile/authorization related)
Hope this helps!
Regards,
Joost

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

HT204065 Group text with one non iPhone not working on iPhone 6 in the group.

Group text with one non iPhone not working on one iPhone 6 in group. SMS, MMS and iMessage as well as group messaging are all turned on. Has worked intermittently but now cannot see or respond in that particular chain. Can send independently to the non iPhone (Samsung) but not in group. Other iPhone 6 and 5 in group work fine.

The reason why you have to turn off 3Gs is because T-Mobile does not support iPhones 1700 something or other. You have to turn off the 3Gs on the iPhone to make it work.
As already provided, it shouldn't matter since the iPhone is designed to automatically connect to the fastest internet connection available. If wi-fi access and 3G network access is on, when in range of an available wi-fi network you have access to and have connected your iPhone with previously, the iPhone will connect to the wi-fi network automatically. When leaving the range of the wi-fi network, the iPhone will connect to the 3G network if 3G network access is available. If 3G network access is not available, the iPhone will connect to EDGE or GPRS - whichever is available at the time.
If this is unique to T-Mobile's network with the iPhone for some reason since T-Mobile is not an official carrier for the iPhone in the U.S. and you were instructed by T-Mobile to do so, then you need to do so.
If this is not working now, the problem lies with T-Mobile and I have no idea what to tell them for them to recognize where the problem lies on their end.

Classic - text ringtones work for one contact but not for others

Just got the new Blackberry classic. I'm having trouble with the ringtones for the text messages. The custom ringtone works for one contact but not for the others. I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A. B sounds the default ringtone from the default profile instead of the custom ringtone.
I have deleted all contacts and done a re-sync thinking something was corrupt. That didn't work.
None of the contacts have a link.
I have changed the notification profile and it still doesn't work.
I have deleted a contact and recreated it manually. It still doesn't work.
I finally deleted my dad's contact and from the phone app created a new contact. I set a custom ringtone for him and it worked. I of course had to recreate all his other information manually. Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone. Also contact A has no hypen in the phone number and it rings the custom ringtone. So that didn't seem to matter.
I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution.
Surely someone has found a fix for this issue.

Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
Note that the iPad cannot send SMS messages.

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

One speaker is not working since long time

one speaker is not working since long time bought in last december

I have iphone 4Gs and I can see at bottom there are 2 nets for speakers and I saw with my college has same iphone and sound is coming from both but mine is coming from only from right side.

IOS Group Messaging not working when Android phones are involved

Group Messaging not working for me when there are both Iphones and Androids involved. iPhones still using iOS 7 don't seem to be having problems leading me to believe this is an iOS 8 problem. Is there a workaround for this yet, or is this a legitimate bug fix that Apple will have to address?

Hey geoff_zen,
Thanks for the question. After reviewing your post, it sounds like you arr having trouble with group messages. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Messages
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT204019 Can I turn off the ringtone for one contact only?

Is it possible to turn off the ringtone for one contact only? The block feature won't work because I still want to be able to receive voice messages from this particular contact.

You can assign a silent ringtone to that one person. Google to find such a ringtone, sync it to the phone, assign the custom ringtone to this person and when they call, the phone will appear not to ring.

HT1947 Remote for ipad landscape orientation not working in ios 7

Remote for ipad landscape orientation not working in ios 7

See this thread: remote app rotation locked in portrait orientation after iOS 7 upgrade
It is a discussion only - no helpful hints. Appears to be a bug for sure.

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

One headphone does not work or works 50% of the time. What is best way to resolve?

one headphone does not work or works 50% of the time. What is best way to resolve?

First of all, I'd recomend resetting the iPod. Do this by pressing the 'Menu' and 'Center" buttons for 10 seconds or until the Apple logo appears.
If this doesn't work, then it sounds like a hardware fault.
To identify the issue, if you have one, try plugging the iPod into a speaker through the dock. If this works, then the issue is with the headphone jack. If not then the logic board is dead. If the iPod is less than a year old, then it can be repaired by Apple for free. Just book an appointment for the Genius bar.
If not then, you could see about sending it to an iPod Repair Company, such as my own. A replacement headphone jack would cost £30.00 in the UK, including next day delivery. Other companies you could try would beUKiPodRepairs, but we guarantee to beat any quote that you get.
Hope that this helps,
Mark Sweeney
Dr Pod Founder

DFS Replication for one group only not working

Similar Messages

Maybe you are looking for