DFs (Windows 2000 Server Mode)

I am running windows 2008 R2 DCs but DFS is still on windows 2000 Server mode.
Can I add a windows 2008 Server as a DFS server?

Hi,
Yes you can add a Windows 2008 Server as a DFS server.
With Windows 2000 Server mode, some new functions will not be available which instructed in 2008 Mode.
Detailed information please refer to:
http://technet.microsoft.com/en-us/library/cc753479(v=ws.10).aspx
If you have any feedback on our support, please send to [email protected]

Similar Messages

Can i change my Exchange 2003 organization to NATIVE MODE if my Front-End Exchange server is Windows 2000 Server

I am planing to upgrade from exchange server 2003 to exchange server 2010. I understand 2010 can co-exisist with 2003, but my 2003 organization must be in NATIVE MODE, not a problem because i don't have anymore MS Server 2000 domain controllers, they
were decommisioned a few moths after we moved to AD. However my Front-End exchange server that sits on my DMZ is running Exchange server 2003 on Windows 2000 Server.
Can i change my Exchange 2003 organization to NATIVE MODE if my Front-End Exchange server is on the Windows 2000 Server OS? If not, will i have to setup a new Front-End Exchange server on at least Windows Server 2003 to replace the 2000 server setup?
It's been a very long time since these servers were configured so i may need help setting up a new Front-End server if it will be required.
thanks
B
Bobby

My apologies for the very, very late reply, is have made the change to native mode for my
Exchange environment, email is working fine, no problems. Thanks Cheng.<o:p></o:p>
I ran the Exchange 2010 Pre-Deployment Analyzer tool yesterday, and it showed that the
Active Directoy Forest is not Windows Server 2003 native. The domain forest
functional level showed the level to be "Windows Server 2003", is
just wanted to verify this.<o:p></o:p>
Our corporate AD has one Root domain, (I’ll call it, Corp.com) and one child
domain, (I’ll call it, na.corp.com). na.corp.com is functioning at Server 2003,
the Forest of Corp.com, as the analyzer found, shows a functional level of
Windows 2000. All Windows 2000 PDC have been off the network for almost 9
years, and were properly demoted and removed. I guess the one place is didn't
look was at the Forest level.<o:p></o:p>
I opened the AD Sites and Service mmc plugin on the corp.com server and did find the old
Windows 2000 PDC listed with the Servers. I drilled down into the containers
for the old server, deleted everything, and was able to delete the W2K PDC. I
still cannot raise the Forest level however.<o:p></o:p>
I also noticed that domain replication has errors, (8614, 1908, 1256, and 8606), so i
have a bit of a mess, and i am not sure how to fix it. I will post this on the
Exchange 2010 upgrade, and AD forums for assistance, but i wonder if i need
paid assistance.<o:p></o:p>
Thanks again Cheng
B<o:p></o:p>
Bobby

Installation problem JDK 1.5 on Windows 2000 server

I am trying to install the new J2SE Development Kit 5.0 for Windows 32 bit on a windows server 2000 computer with sp4. When I attempt to execute the file
I get the following result
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x036eb514, pid=1872, tid=1592
# Java VM: Java HotSpot(TM) Client VM (1.4.2_10-b03 mixed mode)
# Problematic frame:
# C [awt.dll+0xb514]
I see that the log file refers to Hot spot client 1.4.2 - I'll post the rest of log if necessary but thought I would try asking in case the solution is clear without the full log.
I understand JDK 5.0 can be installed on windows 2000 server with service pack 3 or 4. Any help would be appreciated.
Thank you.

I've checked all these possibilities:
(1) DLL's associated with JAVA - none other than 1.5
(2) Path makes no reference to 1.4 anywhere
(3) No othe java programs are listed in add/remove programs
(4) no oracle product is installed
(5) windows 2000 registry does not contain anything obviously associated with 1.4.2
IS any Java product included automatically with Windows 2000 Service pack 4?
Here is the full log file text:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x036eb514, pid=928, tid=1916
# Java VM: Java HotSpot(TM) Client VM (1.4.2_10-b03 mixed mode)
# Problematic frame:
# C [awt.dll+0xb514]
--------------- T H R E A D ---------------
Current thread (0x02c0a160): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=1916]
siginfo: ExceptionCode=0xc0000005, reading address 0x00006ffd
Registers:
EAX=0x00001bf8, EBX=0x037bf638, ECX=0x0000001d, EDX=0x0000001d
ESP=0x03a5f460, EBP=0x081471cd, ESI=0x000000f8, EDI=0x00000004
EIP=0x036eb514, EFLAGS=0x00010202
Top of Stack: (sp=0x03a5f460)
0x03a5f460: fffffffc 02c0a1fc 037ae360 00000004
0x03a5f470: 086c0e44 ffccffff 037bf5f8 037bf5b8
0x03a5f480: 00000000 00000000 00000000 036e1a43
0x03a5f490: 03a60000 00000038 00000278 00000189
0x03a5f4a0: 00000278 03a5f514 037ae360 03a5f508
0x03a5f4b0: 02c0a160 0c14c8f8 03a5f654 0c14c8b0
0x03a5f4c0: 02b30a48 00000004 037ae360 00000000
0x03a5f4d0: 02bdaf98 00000004 00000017 0000027c
Instructions: (pc=0x036eb514)
0x036eb504: 00 00 83 e6 f8 c1 e0 05 c1 e9 03 03 c6 03 d1 45
0x036eb514: 8a 0c 82 8b 44 24 30 88 08 40 89 44 24 30 8b 44
Stack: [0x03a20000,0x03a60000), sp=0x03a5f460, free space=253k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [awt.dll+0xb514]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j sun.java2d.loops.Blit.Blit(Lsun/java2d/SurfaceData;Lsun/java2d/SurfaceData;Ljava/awt/Composite;Lsun/java2d/pipe/Region;IIIIII)V+0
j sun.java2d.pipe.DrawImage.blitSurfaceData(Lsun/java2d/SunGraphics2D;Lsun/java2d/SurfaceData;Lsun/java2d/SurfaceData;Lsun/java2d/loops/SurfaceType;Lsun/java2d/loops/SurfaceType;IIIIIILjava/awt/Color;)V+89
j sun.java2d.pipe.DrawImage.renderSurfaceData(Lsun/java2d/SunGraphics2D;Lsun/java2d/SurfaceData;Ljava/awt/Color;IIIIII)V+40
j sun.java2d.pipe.DrawImage.copyImage(Lsun/java2d/SunGraphics2D;Ljava/awt/Image;IIIIIILjava/awt/Color;)Z+58
j sun.java2d.pipe.DrawImage.copyImage(Lsun/java2d/SunGraphics2D;Ljava/awt/Image;IILjava/awt/Color;)Z+30
j sun.java2d.pipe.DrawImage.copyImage(Lsun/java2d/SunGraphics2D;Ljava/awt/Image;IILjava/awt/Color;Ljava/awt/image/ImageObserver;)Z+15
j sun.java2d.SunGraphics2D.drawImage(Ljava/awt/Image;IILjava/awt/Color;Ljava/awt/image/ImageObserver;)Z+12
j sun.java2d.SunGraphics2D.drawImage(Ljava/awt/Image;IILjava/awt/image/ImageObserver;)Z+7
j javax.swing.JComponent.paintWithOffscreenBuffer(Ljavax/swing/JComponent;Ljava/awt/Graphics;IIIILjava/awt/Image;)V+223
j javax.swing.JComponent.paintDoubleBuffered(Ljavax/swing/JComponent;Ljava/awt/Component;Ljava/awt/Graphics;IIII)Z+131
j javax.swing.JComponent.paint(Ljava/awt/Graphics;)V+208
j java.awt.GraphicsCallback$PaintCallback.run(Ljava/awt/Component;Ljava/awt/Graphics;)V+2
j sun.awt.SunGraphicsCallback.runOneComponent(Ljava/awt/Component;Ljava/awt/Rectangle;Ljava/awt/Graphics;Ljava/awt/Shape;I)V+155
j sun.awt.SunGraphicsCallback.runComponents([Ljava/awt/Component;Ljava/awt/Graphics;I)V+101
j java.awt.Container.paint(Ljava/awt/Graphics;)V+62
j sun.awt.RepaintArea.paint(Ljava/lang/Object;Z)V+324
j sun.awt.windows.WComponentPeer.handleEvent(Ljava/awt/AWTEvent;)V+63
j java.awt.Component.dispatchEventImpl(Ljava/awt/AWTEvent;)V+552
j java.awt.Container.dispatchEventImpl(Ljava/awt/AWTEvent;)V+42
j java.awt.Window.dispatchEventImpl(Ljava/awt/AWTEvent;)V+19
j java.awt.Component.dispatchEvent(Ljava/awt/AWTEvent;)V+2
j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+41
j java.awt.EventDispatchThread.pumpOneEventForHierarchy(ILjava/awt/Component;)Z+169
j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+26
j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
j java.awt.EventDispatchThread.run()V+9
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x02c0a160 JavaThread "AWT-EventQueue-0" [_thread_in_native, id=1916]
0x02ca9fc0 JavaThread "AWT-Shutdown" [_thread_blocked, id=1924]
0x02b2e4a8 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1944]
0x02b153e0 JavaThread "Image Fetcher 2" daemon [_thread_blocked, id=1984]
0x02a94bd8 JavaThread "Image Fetcher 1" daemon [_thread_blocked, id=1776]
0x02aa9da8 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=568]
0x02a8d0d0 JavaThread "AWT-Windows" daemon [_thread_in_native, id=1276]
0x009b9240 JavaThread "Thread-0" [_thread_in_native, id=1812]
0x02b83db8 JavaThread "wizard.main" [_thread_blocked, id=1708]
0x0023e378 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2056]
0x0091e130 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2052]
0x0091bb58 JavaThread "Finalizer" daemon [_thread_blocked, id=936]
0x0091a780 JavaThread "Reference Handler" daemon [_thread_blocked, id=932]
0x00236898 JavaThread "main" [_thread_blocked, id=1816]
Other Threads:
0x00959358 VMThread [id=1460]
0x0095a008 WatcherThread [id=2044]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 1408K, used 474K [0x08140000, 0x082c0000, 0x085d0000)
eden space 1280K, 29% used [0x08140000, 0x0819f868, 0x08280000)
from space 128K, 71% used [0x082a0000, 0x082b6fb0, 0x082c0000)
to space 128K, 0% used [0x08280000, 0x08280000, 0x082a0000)
tenured generation total 18944K, used 3398K [0x085d0000, 0x09850000, 0x0bd40000)
the space 18944K, 17% used [0x085d0000, 0x08921ab8, 0x08921c00, 0x09850000)
compacting perm gen total 6144K, used 6083K [0x0bd40000, 0x0c340000, 0x0fd40000)
the space 6144K, 99% used [0x0bd40000, 0x0c330c48, 0x0c330e00, 0x0c340000)
Dynamic libraries:
0x00400000 - 0x0040b000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\java.exe
0x77f80000 - 0x77ffc000      C:\WINNT\system32\ntdll.dll
0x7c2d0000 - 0x7c335000      C:\WINNT\system32\ADVAPI32.dll
0x7c570000 - 0x7c623000      C:\WINNT\system32\KERNEL32.dll
0x77d30000 - 0x77da8000      C:\WINNT\system32\RPCRT4.dll
0x78000000 - 0x78045000      C:\WINNT\system32\MSVCRT.dll
0x08000000 - 0x0813e000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\client\jvm.dll
0x77e10000 - 0x77e79000      C:\WINNT\system32\USER32.dll
0x77f40000 - 0x77f7c000      C:\WINNT\system32\GDI32.dll
0x77570000 - 0x775a0000      C:\WINNT\system32\WINMM.dll
0x10000000 - 0x10007000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\hpi.dll
0x690a0000 - 0x690ab000      C:\WINNT\system32\PSAPI.DLL
0x007c0000 - 0x007ce000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\verify.dll
0x007d0000 - 0x007e9000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\java.dll
0x007f0000 - 0x007fe000      C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\bin\zip.dll
0x03050000 - 0x0305f000      C:\Documents and Settings\Administrator\Local Settings\Temp\LRE4.tmp\bin\net.dll
0x75030000 - 0x75044000      C:\WINNT\system32\WS2_32.dll
0x75020000 - 0x75028000      C:\WINNT\system32\WS2HELP.DLL
0x782c0000 - 0x782cc000      C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779a4000      C:\WINNT\system32\DNSAPI.DLL
0x75050000 - 0x75058000      C:\WINNT\system32\WSOCK32.dll
0x77340000 - 0x77353000      C:\WINNT\system32\iphlpapi.dll
0x77520000 - 0x77525000      C:\WINNT\system32\ICMP.DLL
0x77320000 - 0x77337000      C:\WINNT\system32\MPRAPI.DLL
0x75150000 - 0x75160000      C:\WINNT\system32\SAMLIB.DLL
0x7cdc0000 - 0x7ce13000      C:\WINNT\system32\NETAPI32.DLL
0x751c0000 - 0x751c6000      C:\WINNT\system32\NETRAP.dll
0x77bf0000 - 0x77c01000      C:\WINNT\system32\NTDSAPI.dll
0x77950000 - 0x7797b000      C:\WINNT\system32\WLDAP32.DLL
0x7c340000 - 0x7c34f000      C:\WINNT\system32\SECUR32.DLL
0x7ce20000 - 0x7cf0f000      C:\WINNT\system32\OLE32.DLL
0x779b0000 - 0x77a4b000      C:\WINNT\system32\OLEAUT32.DLL
0x773b0000 - 0x773df000      C:\WINNT\system32\ACTIVEDS.DLL
0x77380000 - 0x773a3000      C:\WINNT\system32\ADSLDPC.DLL
0x77830000 - 0x7783e000      C:\WINNT\system32\RTUTILS.DLL
0x77880000 - 0x7790e000      C:\WINNT\system32\SETUPAPI.DLL
0x7c0f0000 - 0x7c154000      C:\WINNT\system32\USERENV.DLL
0x774e0000 - 0x77514000      C:\WINNT\system32\RASAPI32.DLL
0x774c0000 - 0x774d1000      C:\WINNT\system32\rasman.dll
0x77530000 - 0x77552000      C:\WINNT\system32\TAPI32.dll
0x71710000 - 0x71794000      C:\WINNT\system32\COMCTL32.DLL
0x70a70000 - 0x70ad6000      C:\WINNT\system32\SHLWAPI.DLL
0x77360000 - 0x77379000      C:\WINNT\system32\DHCPCSVC.DLL
0x777e0000 - 0x777e8000      C:\WINNT\System32\winrnr.dll
0x777f0000 - 0x777f5000      C:\WINNT\system32\rasadhlp.dll
0x03560000 - 0x0358d000      C:\Documents and Settings\Administrator\Local Settings\Temp\ismp001\win32ppk.dll
0x7cf30000 - 0x7d175000      C:\WINNT\system32\SHELL32.dll
0x75e60000 - 0x75e7a000      C:\WINNT\system32\IMM32.dll
0x77820000 - 0x77827000      C:\WINNT\system32\VERSION.dll
0x759b0000 - 0x759b6000      C:\WINNT\system32\LZ32.DLL
0x036e0000 - 0x037f3000      C:\Documents and Settings\Administrator\Local Settings\Temp\LRE4.tmp\bin\awt.dll
0x77800000 - 0x7781e000      C:\WINNT\system32\WINSPOOL.DRV
0x76620000 - 0x76631000      C:\WINNT\system32\MPR.DLL
0x03800000 - 0x03851000      C:\Documents and Settings\Administrator\Local Settings\Temp\LRE4.tmp\bin\fontmanager.dll
VM Arguments:
jvm_args: -Dsun.java2d.noddraw=true -Dtemp.dir=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp -Dis.jvm.home=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp -Dis.jvm.temp=1 -Dis.media.home=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE5.tmp\setup.jar -Dis.launcher.file=C:\Downloads\JDK 1.5 Update 6\jdk-1_5_0_06-nb-4_1-win-ml.exe -Dis.jvm.file=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp\jvm -Dis.external.home=C:\Downloads\JDK 1.5 Update 6 -Xms20m -Xmx60m
java_command: run
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\LRE4.tmp
PATH=C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
USERNAME=Administrator
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 7 Stepping 3, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows 2000 Build 2195 Service Pack 4
CPU:total 1 family 6, cmov, cx8, fxsr, mmx, sse
Memory: 4k page, physical 261668k(84712k free), swap 436140k(257692k free)
vm_info: Java HotSpot(TM) Client VM (1.4.2_10-b03) for windows-x86, built on Oct 10 2005 14:53:46 by "java_re" with MS VC++ 6.0

How to install Windows 2000 Server in x61

I got a new x61 model:7673-B93, and need to install Windows 2000 server in it,
but failed.
Can anyone tell me if I can do this?
Thanks

Manson-Tsui wrote:
I've tried installing Win Server 2003, the system prompting it can't find any drive.
SATA must be set to compatibility mode before any version of 2003 will see a SATA HDD, including 2003 R2 x86/x64 SP1/SP2. i've installed 2003 EE x86 R2 SP1 on my X61 before and can confirm that 2003 can see the drive in compatibility mode.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Oracle8i on Windows 2000 Server - Oracle Instance don't auto start

I've installed the Oracle 8.1.7 on a Dell Pentium III server running Windows 2000 Server operational system. During the installation the Oracle Instance was started up, but after I reboot the computer, the Oracle Listener service and the Oracle service was started in automatic mode but the Oracle Instance do not started though.
My Oracle DBA teacher ask me to run Oradim and edit the Oracle configuration startup parameters. I did, but it didn't solve the problem. The values on Windows registry of the ORA_<SID>_AUTOSTART key is "true". The Dba Studio also gets information form the Oracle server and all the fields seems to be correct with auto-start option, but it didn't work out.
Can someone point me to any text I can read about installation troubles on Windows 2000 Server ?
Thanks in advance.
Jayme.

Hi
I don't have an 8i db to test on but I think it works the same as on 9i.
Check the following parameters in your registry in the key HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0:
ORA_<YOUR_SID>_AUTOSTART=TRUE
ORA_<YOUR_SID>_PFILE=<full path and file name of your init file>

Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional

Hi,
Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
Regards,
Zurvaan

Yes, of course. Both versions works but you have to be prepared for lots of RAM.

Service pack 4 on windows 2000 server with oracle 8.1.7

Hi,
does anyone know if there is any problem installing services pack 4 on windows 2000 server having oracle 8.1.7.?
Thanks.

I have one machine with that configuration and I had not any problem.
Joel P�rez

WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server

Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.
Installing the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
Thanks for any advice.

Hi:
See if this works...
Run msconfig.
In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
Please give that a try, and post back and let us know if that frees up some system memory for you.
Paul

Error while installing CRM 4.0 SR1 with Oracle 10.2 on Windows 2000 Server

Hi.. I'm getting error messages in the Database Instance phase, while installing CRM 4.0 SR1 with Oracle 10.2 on Windows 2000 Server. Following are message snippets with last few lines showing error message:
SAPSSEXC.log
[code](DB) INFO: REPOSRC~0 created
(DB) INFO: REPOTEXT created
DbSl Trace: ORA-4031 occured when executing SQL statement (parse error offset = 0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOTEXT"
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select name,intcol#,segcol#,...","Typecheck","opndef:qkexrAddMatching1")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144208
[/code]
SAPAPPL2.log
[code](DB) INFO: SMOT413~0 created
(DB) INFO: SMOT413~R04 created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 31)
(DB) ERROR: DDL statement failed
(CREATE INDEX "SMOT413~R05" ON "SMOT413" ( "MANDT" , "ERSKZ" ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","select owner#,name,namespace...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144207
[/code]
SAPSLEXC.log
[code]DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: CO2MAP created
(IMP) INFO: import of CO2MAP completed (0 rows)
(DB) INFO: CO2MAP~0 created
(DB) INFO: CO2MAP~IDX created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "CO2MAPINF" ( "SRCID" VARCHAR2(30) DEFAULT ' ' NOT NULL , "METHID" VARCHAR2(1) DEFAULT ' ' NOT NULL , "APPLNAME" VARCHAR2(30) DEFAULT ' ' NOT NULL , "PAGEKEY" VARCHAR2(70) DEFAULT ' ' NOT NULL , "ID" NUMBER(10) DEFAULT 0 NOT NULL , "LANGUAGE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "NAMESPACE" VARCHAR2(30) DEFAULT ' ' NOT NULL ) TABLESPACE PSAPCRM620 STORAGE (INITIAL 16384 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select ts#,file#,block#,nvl(...","Typecheck","opndef:qkexrAddMatching1")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144742
[/code]
SAPSDIC.log
[code](DB) INFO: TNMAP~0 created
(DB) INFO: TODIR created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "TODIR"
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
[/code]
SAPSDOCU.log
[code](DB) INFO: TLSY3~0 created
(DB) INFO: TLSY5 created
(IMP) INFO: import of TLSY5 completed (3 rows)
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 33)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "TLSY5~0" ON "TLSY5" ( "LANGU", "REL", "OLD_REL", "IMP_DATE" ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
[/code]
I am not sure but I think the problem is with the allocated shared memory size, which right now is:
init.ora
[code]shared_pool_size = 67108864[/code]
init<SID>.ora
[code]shared_pool_size = 90112000
shared_pool_reserved_size = 9011200
[/code]
If this is the cause of the problem then how much should i increase it to? and do i need to modify the size in both files or only init<SID>.ora? Is there any SAP Note related to this problem? Thanks.
Regards,

Hi Vasu,
ORA-4031... for 99% of cases this means one thing:
the database instance is not configured correctly.
To proceed, do the following:
1. get rid of init.ora (it's not used at all)
2. make sure that the init<sid>.ora file is really used.
 If there is a spfile in the %ORACLE_HOME&/database folder
 then this will be used.
3. With your configured shared pool of 85MB your memory should really not be filled up - anyhow it's really too small for a SAP system!
Thus I'd check how much memory the other sga-area members (buffer cache, large pool, streams pool, java pool...) take up.
 Remember on Windows 32 Bit, everything runs in one single process that can only allocate 2GB (or 3GB if you've set this option).
See note:
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=869006&_NLANG=E">#869006 - Composite SAP note: ORA-04031</a>
for more on this.
And when you're setting up parameters anyway, check note
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=830576&_NLANG=E">#830576 - Parameter recommendations for Oracle 10g</a>
KR Lars

9.2.0.1.0 install hang at loading product on windows 2000 server SP4

When I am trying to install Oracle Enterprise server 9.2.0.1.0 on a Windows 2000 server SP4 freshly installed
The OUI hang when loading product @ 91% on the "File Location" screen !
This is not the symcjit.dll prob with P4 computer because I have upgrade the P4 motherboard drivers and I have tried the solution which is to rename this file and it is not working
Any URGENT idea ?
Thx

I have installed 9i successfully on machines with AMD64 cpus and 64bit Xeons without any problems.
Cheers,
R

Install Oracle 8i Personald Edition on Windows 2000 Server SP2

Hi
I have problem to install the Oracle 8i Personal Edition on
Windows 2000 Server SP2.
I run the Setup.exe, I become the message (not exactly) “JRE
(Java Runtime Environment) was not found…… please visit
www.javasoft.com….. and install JRE version 1.1.7 or higher…”
Now, I have download and install this JRE (JavaTM 2 Runtime
Environment v 1.2.2_008 / Internationalized version of Java 2
Runtime Environment).
The error-messages comes again.
Have everyone a idea?

hi phill...
why dont you try it out with the same CD and increase your RAM
by another 64MB? This will be enough. The reason is , most
Oracle 8i releases are combined with a java based Oracle
Universal Installer. This requires some good amount of RAM. Just
try it out with some extra memory. If this also didnt work, then
send in the problem,error with your system config. This will
help me in solving your problem.
Imran.

Oracle 8i Client running on Windows 2000 Server

Hi,
I have Oracle 8i Client running on Windows 2000 Server. I need to connect to Oracle 8i Server running on Sun Box.
I have problems with connectivity.
When I do tnsping <service name>, I am geting the followiing
error:
C:\>tnsping <Instance name>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 04-FEB-20
02 16:37:01
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=<IP Address>)(PORT=1521)) TNS-12541: TNS:no listener
Can any one help me out
Thanks
mka

Hi,
I have Oracle 8i Client running on Windows 2000 Server. I need to connect to Oracle 8i Server running on Sun Box.
I have problems with connectivity.
When I do tnsping <service name>, I am geting the followiing
error:
C:\>tnsping <Instance name>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 04-FEB-20
02 16:37:01
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=<IP Address>)(PORT=1521)) TNS-12541: TNS:no listener
Can any one help me out
Thanks
mka

Oracle 8i 8.1.7 on Windows 2000 Server

After I install Oracle 8.1.7 on Windows 2000 Professional, Everything is Good, database and Enterprise Manager Server startup normal.
But when I install Oracle 8.1.7 on Windows 2000 Server, the Oracle Service startup normal , but the database instance can not startup automatical, I must startup the database instance manual using svrmgrl program and the Enterprise Manager Server can not startup ?

check it:
start
-->program
-->$oracle_home$
-->Database Administration
-->Oracle Administration Assistant for Windows NT
oracle instance 'startup/shutdown options'

Oracle 8.1.7 Server Installation on a P4 Windows 2000 Server

I am trying to Install Enterprise Oracle 8.1.7 on a P4 Windows 2000 Server Machine. I had a solution regarding the P4 bug, which asked the latest Service Pack for Win 2000 to be installed, the Oracle CD dump copied to hard disk and symcjit.dll to be renamed. This enabled me to start the Installation Process. I chose the Administrator option during installation.
However I noted that only Oracle Client is Loaded and NOT Server. I do not get any options to install Server. I only have 1 CD for Enterprise Oracle 8.1.7 which should have both Server Programs and Client Programs to Install I believe!
Any help would be appreciated!!!
Thanks

Dear Nandakumar Ananthanarayan,
I read your posting and I seem to have a similar problem.
I am trying to install Oracle8i ver 8.1.7 on WINDOWS 2000
SERVER with service pack 3 on an Intel Xeon Processor at 2.4GHz.
Raid 5 is used on 3x36GB Hard Drives.
When the Oracle8i CD is inserted the initial screen comes up.
From this I choose "Install/Deinstall Products".
After this nothing at all happens.
The initial screen closes and the system is as it was.
I would be obliged if you could help me out.
Yours Sincerely,
Chris.

Problem installing Oracle 8i(8.1.7) standard edition on windows 2000 server

I am trying to install Oracle 8i (8.1.7) standard edition on windows 2000 server but the setup program doesn't run.
It starts up, allocates some ram then closes before a window even pops up.
I also have MSSQL server installed on this computer, does that conflict?
Has anyone encountered this problem before? If so, please give a solution if you have one, thanks,
OPS

Yes. There is a bug with Pent4, Win2000 & Oracle8i.
Here is the workaround:
This is a known bug with Oracle java-based applications and Pentium 4 Use this work-around:
1) Copy the install directory from the CD to the hard disk.
2) Edit oraparam.ini and modify it as follows:
* Edit the "SOURCE=" line to to show the full path to the CD ; SOURCE={CD DRIVE LETTER}:\stage\products.jar)
* Edit the "JRE_LOCATION" line to show the full path to the CD ;
JRE_LOCATION={CD DRIVE
LETTER}:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Edit the "OUI_LOCATION" line to show the full path to the CD ;
OUI_LOCATION={CD DRIVE
LETTER}:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Edit the "JRE_MEMORY_OPTIONS" line to include "-nojit" as the first argument ;
JRE_MEMORY_OPTIONS=-nojit
-ms16m -mx32m
3) Start setup.exe from your hard drive
Choose a Custom install and choose not to create a database during the install.
This way, the Database
Configuration Assistant will not be launched during installation. DONT SELECT
NET8 products for installation.
You need to put the same java parameters for the DB configurator and the Net8
Configurator
to run.
-nojit -ms16m -mx32m before -classpath on:
* assistants\dbca\DBAssist.cl
* network\tools\netca.cl
** Run the DataBaseConfigurationAssistant and NetworkConfigurationAssistant after installation.
Hope it helps!
Amrit

DFs (Windows 2000 Server Mode)

Similar Messages

Maybe you are looking for