DFSR error 2104 and 2004

I have DFSR on a server 2008 that I started receiving 2104 and 2004 errors. The drives are healthy and have almost 600 GB of free space. The system account has full access to the system volume information directory. I also removed the DFS role and
cleared the DFSR folder from system volume information directory. When I installed the DFS role again the DFSR folder is recreated and the server retrieves the configuration, creates the database folder but the database is not created and I recieve the 2104
and 2004 errors. the errors I get are below. Any help will greatly appreciated.
The DFS Replication service failed to recover from an internal database error on volume D:. Replication has been stopped for all replicated folders on this volume.
Additional Information:
Error: 9214 (Internal database error (-583))
Volume: 04DF1002-B135-11E4-A387-806E6F6E6963
Database: D:\System Volume Information\DFSR
The DFS Replication service stopped replication on volume D:. This failure can occur because the disk is full, the disk is failing, or a quota limit has been reached. This can also occur if the DFS Replication service encountered errors while attempting to
stage files for a replicated folder on this volume.
Additional Information:
Error: 9014 (Database failure)
Volume: 04DF1002-B135-11E4-A387-806E6F6E6963

Hi,
Please try to rebuild the DFSR Database on the HUB server to see if it can resolve the issue.
How to recover from a DFSR database crash on designated primary member
http://support.microsoft.com/kb/961879
In additional, you could install the hotfix in the KB article below:
The event ID 2104 is logged in the DFS Replication log on a downstream server when the DFS Replication service stops
http://support.microsoft.com/kb/979295
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

IPhoto '08, Microsoft Word 2004 and an error: QuickTime and TIFF

Hi,
When I drag and drop photos from iPhoto into Word, I get the following error:
QuickTime and a TIFF (decompressor) are required to see the picture.
The image is placemarked with a black border with the error message in the center. iPhoto indicates that the picture is JPEG. I have also discovered that dragging the picture to the desktop and then into Word works fine.
I checked the console log and found the following:
Rosetta Version: 17.25
Args: /Applications/Microsoft Office 2004/Microsoft Word /Applications/Microsoft Office 2004/Microsoft Word -psn06029313
Exception: EXCBADACCESS (0x0001)
Thread 0: Crashed (0xb7fffabc, 0x82f58032)
0x90016768: /usr/lib/libSystem.B.dylib : large_and_hugemalloc + 0x2d4
0x903d9b94: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : img_decoderead + 0x1f4
0x903ca6a0: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : img_interpolateread + 0x1a0
0x903b44f8: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : img_datalock + 0x1008
0x903b2658: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _CGSImageDataLockWithReference + 0xa8
0x94c98128: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib : ripcAcquireImage + 0x3c8
0x94c96554: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib : ripcDrawImage + 0x9b4
0x903b0ce4: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _CGContextDrawImage + 0x198
0xeab0ec48: No symbol
0xeab12714: No symbol
0x9182f1b4: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD : _PicItemVerb + 0x1010
0x9182d8ac: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD : _DrawPicture + 0xa6c
0xeab19ca0: No symbol
0x844947d8: No symbol
0x84495b00: No symbol
0x81da7430: No symbol
0x81b443ac: No symbol
0x81e81754: No symbol
0x81e81a38: No symbol
0x81c9fd38: No symbol
0x81c89b1c: No symbol
0x81c851ec: No symbol
0x81c84c94: No symbol
0x81cab254: No symbol
0x81c9c7f0: No symbol
0x84ba0e68: No symbol
0x84defd08: No symbol
0x846a37b4: No symbol
0x846766a8: No symbol
0x846760c4: No symbol
0x84aed218: No symbol
0x84aed7c0: No symbol
0x84b09454: No symbol
0x8483c644: No symbol
0x8483c9fc: No symbol
0x846db090: No symbol
0x846da528: No symbol
0x846da2ec: No symbol
0x819cdab8: No symbol
0x843dcecc: No symbol
0x843dce4c: No symbol
0x843dcddc: No symbol
0x843dcc8c: No symbol
0x93242cdc: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 0x3e0
0x932422e0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 0x160
0x93249a58: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SendEventToEventTarget + 0x28
0x932cdbc8: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _Z18SendHICommandEventmPK9HICommandmmhP20OpaqueEventTargetRefS3PP14OpaqueEventRef + 0x1b0
0x93301894: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SendMenuItemSelectedEvent + 0x84
0x93301784: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _Z19FinishMenuSelectionP8MenuDataS0_P10MenuResultS2mmmh + 0x88
0x932e68c8: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z14MenuSelectCoreP8MenuData5PointdmPP13OpaqueMenuRefPt + 0x194
0x932e63f0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _MenuSelect + 0x64
0x843dc074: No symbol
0x93242cdc: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 0x3e0
0x932422e0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 0x160
0x93249a58: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SendEventToEventTarget + 0x28
0x9324a34c: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z29ToolboxEventDispatcherHandlerP25OpaqueEventHandlerCallRefP14OpaqueEventRef Pv + 0x8d0
0x93242ff4: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 0x6f8
0x932422e0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 0x160
0x93249a58: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SendEventToEventTarget + 0x28
0x843d2850: No symbol
0x8469fabc: No symbol
0x845cc5fc: No symbol
0x81994464: No symbol
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x903d35e4 ctr: 0x00000ed9
r00: 0x00000087 r01: 0xbfff8f40 r02: 0x00000084 r03: 0x11074bec
r04: 0x00000001 r05: 0x00000002 r06: 0x00000003 r07: 0x00000000
r08: 0x0ef62000 r09: 0x00000079 r10: 0x0cc054d0 r11: 0x00000004
r12: 0x903d99a0 r13: 0x00000000 r14: 0x00002059 r15: 0x00000000
r16: 0x00002059 r17: 0x0ef5da00 r18: 0x0cc02050 r19: 0x11074be0
r20: 0x00000000 r21: 0x00000020 r22: 0x110e50a0 r23: 0x00000060
r24: 0x00000060 r25: 0x00000008 r26: 0xffffffff r27: 0x00000001
r28: 0x00000018 r29: 0x00000003 r30: 0xbfff9030 r31: 0x903d35e4
Thread 1: (0xb00997fc, 0xb8134443)
0x90005a20: /usr/lib/libSystem.B.dylib : _free + 0x5c
0x00715204: No symbol
0x9002bbe8: /usr/lib/libSystem.B.dylib : _pthreadbody + 0x60
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0x0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x9000a97c ctr: 0x9000aa20
r00: 0xffffffe1 r01: 0xf0080ce0 r02: 0x00000001 r03: 0xf0080dcc
r04: 0x00000102 r05: 0x00000000 r06: 0x00000054 r07: 0x00003303
r08: 0x000003e8 r09: 0x00000000 r10: 0x00000006 r11: 0xa00069a4
r12: 0x9000aa20 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0xf0080dcc r25: 0x00000054 r26: 0x00003303 r27: 0x000003e8
r28: 0x00000000 r29: 0x00000102 r30: 0x00000102 r31: 0x0071ffb0
The system is an iMac7,1 (20" alu)
Any help would be appreciated. This seems to be a new problem, as I was able to drag+drop from iPhoto '08 into Word after upgrading to '08. I do not recall when the problem began.
Thanks!

Hi
This sounds like a problem that's been discussed many times. If you use the Search button (select more options) and change the 'Restrict by Date Range' to something like 'Last Year' you should find something? You might want to read these:
http://www.macintouch.com/readerreports/office2004/topic2741.html
http://forum.soft32.com/mac/save-files-open-ftopict89866.html
I think Office 2008 is supposed to have made things better?
Tony

Wily Introscope Dashboard cannot be started: Silverlight Error 2104

Dear Gurus,
we have installed a DualStack SolMan 7.0 Ehp1 SPS23 on AIX/Oracle.
Diagonstics and WilyEM 8.2 is installed and running well, Data from Agetens SMD7.11 and IntroscopeBytecodeAgents data are displayed also in Wily Introscope Webview - Investigator tab.
Silverlight 4 is installed since last May.
Last week the regular Microsoft-Patching did on our FrontendWorkstations (WinXP SP3) with IE7
Additionally there was an upgrade of our SolMan Operating-System drom AIX5.3 to AIX6.1
During this update also an JAVA 1.5 was newely installed for WilyEM, and the parameter " "the VM to use for the next launch" in the lax-file points to this Java-Version:    java full version "J2RE 1.5.0 IBM AIX build pap64dev-20091106a (SR11 )"
But today we recognized - after sucessfully start of Wily EM WebView - that there is a problem when we try to select one of the prepared Dashboards from SAP and press the "View"-Button:
We get an ErrorMessageBox from IE whichs saids:
"Silverlight error:"
"Error Type: InitializeError"
ErrorMessage:2104"
and no Dashboard comes up.
The same Error occours when we use antoher Browser ?
Can anybody please help ?
What could be the reason or solution for this kind of error ?
Thanks a lot !
Stephan

Dear Mateus,
unfortunately I wasn't able to use your workaround successfully:
Even when I mark the "Consoile"-Tab and press the "Refreh"-Button to reload the Page, i still get the same Error-Messages...
Are there newer/other fixes available to solve this problem ?
Which fix do you mean exactly ?   We currently run following version of WilyEM / WebView (from IntroscopeEMWebView.log)
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView Release 8.2.2.0 (Build 476364)
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Java VM version "IBM J9 VM 1.5.0" from IBM Corporation
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Introscope installation at: /usr/sap/ccms/wilyintroscope/.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] CA Wily Introscope(R) Version 8.2
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Copyright (c) 2010 CA. All Rights Reserved.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope(R) is a registered trademark of CA.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Starting Introscope WebView...
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView started.
10/22/10 10:54:27 AM GMT+01:00 [INFO] [WebView.Login] Successfully logged in user "WilyWebView"
10/23/10 11:08:07 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:08:18 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:19 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:34 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:58 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
Thanks,
Stephan

I am loading 0material_attr, getting error again and again

Hi Guru's
I am loading 0material_attr, getting error again and again as mentioned below:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
please anybody help me in this regard.

Hi Manna,
goto the path Environment -> Transact. RFC -> Source System as mentioned in the error. It will ask for source system ID & password. Enter & login. check if anything is struck over there. If so, execute it manually or press F6.
You can also check SM58 trans for tRFC in BW system. If it is in Red, execute it manually.
You can also refer the below thread:
Missing data packages for PSA Table (BI 7.0 2004s)
Hope it helps & resolves your issue!
Regards,
Pavan
Edited by: PavanRaj_S on Jan 17, 2011 5:05 PM

DFSR Error : Error: 9098 (A tombstoned content set deletion has been scheduled)

Hello,
We are getting this error on one of our DFSR shares and am not sure how to get this fixed. We have over 30 different shares replicating and all of them are fine except for one. I have tried to remove the Replication and the namespace and have recreated them
both and continue to get the same error. This is what is in the event logs on the server;
The DFS Replication service stopped replication on the replicated folder at local path E:\SHARE\Sharelocation.
Additional Information:
Error: 9098 (A tombstoned content set deletion has been scheduled)
Additional context of the error:
Replicated Folder Name: Sharelocation
Replicated Folder ID: 9BDA3E5A-8103-481F-84B2-269AE8A3BBC8
Replication Group Name: SHARE
Replication Group ID: C25E73B7-5B65-4299-A1BE-76E723443B02
Member ID: 568CC517-3329-42A4-ABAD-633CB3D1EF2E
If anyone has any suggestion on how to get this working again it would be greatly appreciated.

Here is a short summary of what I did:
Look in Event Viewer and identify all the replication groups/folders that are giving the tombstone error. Once you have them identified, go into DFS Management GUI and completely delete the replication group
associated with that folder. You do not need to delete the DFS Namespace for that folder, just the replication functionality of that namespace folder. If you have other replication groups in your DFS-R that do not get the 9098 errors, then you do not have
to do this for these folders.
Stop DFSR services (you may need to kill the service using the taskkill command if it hangs when it tries to stop).
Give yourself permissions to the hidden System Volume Information folder. If you're account is under the domain admins group, you can simply add the security group.
This folder exists on all servers that is a member of the replication group. In my situation, 2 of the 3 servers didn't show this folder as existing even when I enabled to see hidden folders. If this happens to you,
the server is lying to you that it's not there. It is there. Don't listen to it. My suggestion is to download and use the 7-zip file manager. It will see the folder and will help you set the permissions to
it as well as delete files that are longer than 256 characters, which is an issue if you do the next step from the command line).
Note, after you set the permissions, it might tell you that you still don't have access to that folder. Just close out of 7-zip and open it back up. It should let you in that folder as well as its subfolders.
Once you have access to that folder, go ahead and delete the DFSR folder that resides underneath it. You will want to do this on all servers that has the DFSR role installed and is a member to any replication
groups. You can use the command line command "rmdir", but it fails to delete files/folders that are longer than 256 characters. This is why the 7-zip file manager is a better option to delete the DFSR folder under System Volume Information. However,
there are instances where 7-zip is unable to delete a file or folder. If you run in that scenario, use the rmdir command in an elevated command prompt. Essentially, a combination of these two will eventually clear out everything you need to clear out.
Turn DFSR services back on. This will begin the process of recreating the DFSR hash and virtual tree that you had just deleted.
Recreate the replication group that you want.
On the replication groups that you did not delete, you may get the warning: "The DFS Replication service initialized the replicated folder at local path <path> and is waiting to perform initial
replication. The replicated folder will remain in this state until it has received replicated data, directly or indirectly, from the designated primary member."
If you do, what you need to do is run the command line to set one of the DFSR servers as the primary server for that replication group, and then once set - this
is important - you will have to go in the DFS Management GUI, click on the replication group with the associated warning, select the connections tab, and then right click the the sending member that
you just made as primary and choose "Replicate now..." This will initialize the replication and you will have to do this just that once for it to replicate here on out. You will need to do choose the "Replicate now..." option for each receiving
member that the sending member/primary member server is attached to in that replication group.
Wait about 5-10 minutes and run the dfsrdiag backlog command on each replicationgroup and see if a backlog for replication/sync gets created. Run this command each 5 to 10 minutes to see if the backlog file count value decreases. If it does, it's syncing/replicating.
Don't forget that when testing replication, you cannot create test files via the local path and see if it replicates. You must create it in the DFS Namespace (\domain\folder\share) to see if replication works. Otherwise
you get false negatives and you think replication is still broken. Just an FYI.

DFSR error 9226 when Barracuda Backup kicks-off. (No DFSR installed on Server)

I have a server 2012 Essentials VM on VMware. The issue I am having is with my Barracuda Backup.
Almost every night when my Barracuda backup kicks off (the time stamp of the error matches the Barracuda kick-off time), I get a DFSR error in the Server Log:
NOTE: DFSR services are NOT installed nor configured on this WIN 2012 essentials server.
Critical Errors in Event Logs in Last 24 Hours
DFSR
Event ID: 3221229476
The DFS Replication service stopped replication on the replicated folder at
local path C:\Windows\SYSVOL\domain.
Additional Information:
Error: 9226 (Multiple volumes share the same volume serial number which prevents DFSR from finding the right volume)
Additional context of the error:
Replicated Folder Name: SYSVOL Share
Replicated Folder ID: 3421DB23-8B10-41FB-B1B0-9BA04AA64B62
Replication Group Name: Domain System Volume
Replication Group ID: AD952CE1-863A-499B-B16A-D4178DF58EF1
Member ID: 4575C511-6DA8-405C-A47C-F9161D839650
The issue I am trying to resolve (and quite honestly I don't know if they are related) is that my Barracuda backup backs up more data each night than I have on the entire server. It backs up about 124 GB -126 GB each night.
It is supposed to only back up changed blocks, which I would guess would be around 6-8 GB per night for this particular server.
I have two other sites set up just like this and they backup properly. See a comparison of the 3 backup logs here: Backup Logs
The server has 2 volumes. A 60 GB OS volume with approx 33 GB used, and a 100 GB data volume with approx 33 GB used. For a total of approx 66 GB of data on the guest. 160 GB total space available.
If I understand DFSR correctly, I do not need this functionality on this particular server.
I don't want to get Barracuda any more involved at this point until I KNOW for certain it is NOT a VMware or SBS 2012 issue.
Any thoughts would be appreciated. Thanks.

Hi PW-TOS,
Please use
Dcdiag to analyzes the state of the domain controller. Any find?
Please also refer to Robert's reply in following thread and check if troubleshoot this issue.
dfs replication service stopped...problem or not?
In addition, this may be caused by DFS Replication Broken. Please do an authoritative restore whcih you can find in
KB2218556 and monitor the result. (Please back up the server before any operation. That will help us to avoid unexpected issues.)
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I set up family sharing wrong, so i left family sharing and joined the right way agin but an error occurred and now it tells me I'll have to wait 364 days to rejoin again! How can I reset my account so I can use it again?

WWhen I set up family sharing i did it with me as family organizer, but as my spouse is the organizer I had to leave the "family" I created and join his. But while setting it up an error occurred, and the screen went blank. Now I tried to join his family sharing again, and my phone keeps telling me I can't because accounts can only join families twice a year.
I Don't really want to wait 364 days from now, is there a way in which I can reset my accoint so I can join family sharing again?
Apple support doesn't have a solution for me yet!
KInd regards

This morning I looked at my family sharing account again an IT WORKS NOW! Think Apple has done a reset to my account, though I'm not exactly sure why! So I hope it works for you guys as well!

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

I am getting an error report and not sure how to fix the script. Please help...

I am using action script 3. I have html codes from ccbill that I am trying to make work with flash. Here is the script I am trying to use:
import flash.net.URLRequest;
var url:String = 'http://www.lexiefyfe.com/ccbill9001/index.htm';
myButton.addEventListener(MouseEvent.CLICK, onOrderClick);
function onOrderClick():void
      var request:URLRequest = new URLRequest(url);
      try {
            navigateToURL(request, '_blank');
      } catch (e:Error) {
            trace('An error occurred');
Here is the code from ccbill:
<A HREF="http://www.lexiefyfe.com/ccbill9001/index.htm"><img src="ccbutton.jpg"></A>
This is the error report I am getting:
Scene=photogallery, layer=buttons, frame=1, Line 1 Statement must appear within on handler
Scene=photogallery, layer=buttons, frame=1, Line 3 Statement must appear within on handler
Scene=photogallery, layer=buttons, frame=1, Line 5 Statement must appear within on handler
Scene=photogallery, layer=buttons, frame=1, Line 7 A type identifier is expected after the ':'.
Scene=photogallery, layer=buttons, frame=1, Line 9 The class or interface 'flash.net.URLRequest' could not be loaded.
Scene=photogallery, layer=buttons, frame=1, Line 7 Statement must appear within on handler
If anyone can help me with this issue I would be most grateful.
Thank you for any consideration,
Thomas

You have a mixture of things going on... AS3 code in an AS2 setting. Those are all AS2 error messages, and they are indicating you have placed the code on the buttons. To use that code, it must be placed on the timeline, and your Flash Publish Settings need to have AS3 specified instead of AS2. AS3 does not allow code to be placed on objects like AS2 does.

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

HT4972 i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!

i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!

Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H.

Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do?

Help. Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do? What does it mean? I bought Elements 10 at a retail store. It did work for a while.

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

ITunes will not open (no error message and not running Norton 2005)

I have recently upgraded to iTunes 7 and I now cannot get it to open after clicking on the icon. The iTunes.exe process comes up in the task manager briefly then disappears. There is NO accompanying error message and I am NOT running Norton Antivirus 2005. I have already tried reinstalling the standalone version of quicktime and I have used msconfig so that I essentially have only the necessary iTunes/quicktime processes running (no antivirus/antispyware/anti-popup software is running in the background). I have Windows 2000 and I have never had a problem with iTunes until now. Somebody please help me out here.

wapierce,
It looks like we have covered all the bases here. Unfortunatly it looks like The computer cannot run iTunes or the OS has an issue that may require a reeinstall.
Lets verify the Hardware and OS one more time. Click Start> right click My Computer> Properties(you can also open My Computer then click view system information on the left side of the window.) What does the processor and Memory say here? Also what is it saying aout Windows.
Make sure there are no upadtes available for the computer.
When you installed iTunes did you make any registry changes? It sounds like the next step would be doing a restore or re-install of Windows on the computer.
Jason

DFSR error 2104 and 2004

Similar Messages

Maybe you are looking for