DFSR Error that the server does not have Adequate free space. But it does.

Hi, I have a 3 memeber DFS replication group on Windows 2008 R2 servers.  On one of members replication stopped and the Health diagnostics report states that there is not enough disk space on the drive to replicate.  But there is.  It
replicates to the other member with much less free space.  I have increased the staging quota after running the caculation command in Power shell to determine the largest 32 files.  There is pleanty of free space.  I have restarted the
DFS service and restarted the server.  I have created a new Replication group on the same volume and it works fine.
Any Ideas?
Steve
Steve

Hi Steve,
It will only copy the changed data to sync all files when re-add the failing member server back to the replication group. If the changed data is very large, you could do a robocopy to copy the changed data, then re-add the failing member server back to the
replication group.
You could refer to the article below to know some considerations when re-add a member server back to a replication group.
After you re-add a member server to a DFS replication group in Windows Server 2003 R2, initial replication does not occur on the member server, and changes in the replicated folder are replicated unexpectedly to other replication partners
http://support.microsoft.com/kb/961655
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • HT4623 i have updated my i.phone 4 g  but after updating when i turned on my phone it was showing the sign to connect to i.tunes and when when i connected i.tunes showed error that the server could not be contacted.... so what i can do now to resolve the

    i have updated my ios 5 to 6 but when the updating aur dowloading has comleted and i turned on the phone it showed a sign to connect to the itunes and then i connecte to itunes but i.tunes showed error that the server could not be contacted....now what i can do to resolve the problem????

    has your phone been jailbroken?

  • The disc inserted does not have enough free space

    I created a disk image about 451 MB, it an Audio Disk. When I try to write the image to a blank Memorex CD-R 700 MB I get the message: "The disc inserted does not have enough free space".
    When I created the image I used the disk utility and followed the help file instructions. When I open File> New> I can only select "disk image from folder", the other option is grayed out.

    wow, this is my first real disappointment with my MacBook. I can't burn images, technical support didn't get me any further than I already was. I spent half a day trying everything in the world to burn an image with no success.(followed all the help instructions) Now I have to go into the Apple store to have them go through all the same stuff I went through today. Two days of working on this computer to burn a CD with no success.
    My guess is that at the end of the day tomorrow I will walk away from the store with no computer because of a malfunction. What a wasted weekend.

  • "Disc inserted does not have enough free space"

    I am ready to burn my slideshow on a DVD. The info window in the project indicates that I am well within the parameters to fit on a DVD (4.7 GB). All the gauges are green. However, when I go to burn the disk I get the error message: "Disc inserted does not have enough free space". Looking at the info palette from the Finder window regarding the disk image, I find that it requires 5.8 GB, which, of course, won't fit. How come the iDVD project says I am good to go when I am not?
    I have OSX 10.4.11 and work on a G5. I have 53 GB available.

    Perhaps you may wish to use Dual Layer DVD-R Media (Verbatim / Maxell) in the event your mac supports this newer media. If not, you can add an ext. FW Burner preconfigured from Lacie or do what I did and build your own:
    http://discussions.apple.com/thread.jspa?messageID=5826029&#5826029
    and here's how I select Dual layer via the ext. FW Burner as opposed to the stock S-drive:
    http://discussions.apple.com/thread.jspa?messageID=5566746&#5566746
    The only other option that comes to mind for SL as well as DL medias is burning said image with Roxio Toast (fit to disc option).
    Message was edited by: SDMacuser

  • How do I fix Your hard disk does not have enough free space?

    How do I fix Your hard disk does not have enough free space?

    Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the sidebar of a Finder window, and open the Info window. How much space is Available? Specify gigabytes (GB) or megabytes (MB).

  • Inserted DVD+R DL Does not have enough free space

    I am trying to burn a Disk Image that is 6.9 GB to a DVD+R DL 8.5 GB using Disk Utility but I keep getting the error message that there is not enough free space. I have inserted a few different blank discs and I keep getting this error message. Using 10.5.6 Superdrive with iMac. All I can think of is the Disk Utility is not recognizing the DVD as a DL, or possibly I need to convert the Disk Image to something I don't know about or use iDVD. Please advise. Thanks.

    hotwingz, Welcome to the discussion area!
    How much free space do you have on your hard drive? To burn a 8.5 GB disc you would need at least 8.5 GB free on the hard drive. Usually you need twice that (17 GB).

  • Warning that the GPU accelerated ray-traced 3D renderer does not have enough free memory to operate

    [UPDATE: Memory handling for the ray-traced 3D renderer is greatly improved by installing the After Effects CC (12.2) or After Effects CS6 (11.0.4) update.]
    You may see a warning message when using After Effects CC (12.1) that the GPU accelerated ray-traced 3D renderer does not have enough free memory to operate.
    When the GPU acceleration of the ray-traced 3D renderer is disabled, the CPU version of the ray-traced 3D renderer will operate.
    The message about the GPU-accelerated ray-traced 3D renderer not having enough free memory to operate is because of a change in After Effects CC (12.1) to actually warn you when your computer was in a dangerously low VRAM state. In After Effects CC (12.0) and After Effects CS6 (11.0), a computer with very little VRAM could still try to use the GPU accelerated ray-traced 3D renderer, but it would very, very, very often crash. So, now, After Effects CC (12.1) is just detecting the condition that would lead to a crash, telling you about it, and disabling the GPU acceleration until you have dealt with the problem.
    So, how do you deal with this low-memory condition? You free up VRAM. This means closing all applicaitons that use GPU memory, which includes web browsers (yes, web browsers these days use the GPU). It also means disconnecting additional monitors, each of which uses a lot of VRAM. In some cases, restarting the computer is necessary.
    This is primarily a problem on Mac OS with cards with 1GB of VRAM, such as the GT 650M in the MacBook Pro. These cards on this OS have just barely enough GPU memory (VRAM) to make use of the GPU-accelerated ray-traced 3D renderer under even the best of circumstances. If you want to use the GPU-accelerated ray-traced 3D renderer, you should really be using a more powerful GPU, one with more VRAM.
    Note that this has nothing to do with the OpenGL GPU features in After Effects. Details of the GPU features are here: http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html

    hey Todd
    i have the exact same problem but with my new macpro with renderay no matter what i do even a simple 3d extraction the renderay crashes! My cuda is full up to date and everything not sure why! if you have any way to resolve this issue would be awesome and help us out since i am on a deadline! at the moment!
    I have attached a few screen shots and my computer specs! as you can see the GPU Should not be running low on memory xD since its pretty much nearly full speced!
    The error!
    This is what was there! and all i added was a extractor after this and the error above appears!
    and this is my computer specs as you can see there is no lack of Power, Ram or VRAM here! so not sure why this error is occurring even after updating CUDA
    if you have anything else i could try please let me know! Thanks!

  • The message that comes up says that the server can not be found ...why does this keep happening?

    I continually get the message that the
    'server can not be found at this address. Check to make sure that the address is typed properly etc. etc.'
    When I try to use Internet Explorer with the same info there is no such message. Why

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

    Hello,
    I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance.  I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server.  However when going thru ISA I receive the
    following Error.
    Power View  Cannot connect to the server due to a security issue.  The server may not have been able to match the host for Silverlight.  This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
    I've seen a couple references to this issue but not much.  This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that.  http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
    Any Ideas?  Thanks.
    Ryan

    Hi Ryan,
    Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

  • I travel for work and use iCloud - I can not use back to my mac because i use a Verizon MiFi wireless that does not have NAT-PMP or UPnP. Does anyone know of a way to get around this problem

    I travel for work and use iCloud - I can not use back to my mac because i use a Verizon MiFi wireless that does not have NAT-PMP or UPnP. Does anyone know of a way to get around this problem

    All ISP-provided equipment is junk. You could get a decent router and connect it to the Verizon router in bridge mode. It should cost about $ 30.

  • External video projector - How can I hook up my Mini DisplayPort to DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?

    Hi
    How can I hook up my DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?
    Is there a DVI adaptor already for Thunderbolt?
    Thanks,
    JFR

    The Mini Display port and Thunderbolt port use compatible connector bodies. Your current Mini Display to DVI or VGA adapter will still work as before on the newer Thunderbolt capable machines.

  • HT201210 trying to update my iphone but it ends up giving me an error saying , the server could not be contacted or is unavailabe ????

    trying to update my iphone but it ends up giving me an error saying , the server could not be contacted or is unavailabe ????

    Restore the iPhone when connected to iTunes by cable.
    Still the same TS1275?
    Is your iPhone jailbroken?
    Or
    Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

  • My tv does not have a HDMI port, but my cable digital box does can that work?

    So my tv is a LCD Monitor and it does not have a HDMI entrance, but I am using a a digital box for my cable which does have a HDMI cable. Is there a chance by connecting it to the digital box I can get it to work. If not, what are my options to make my Apple TV to work? I already bought it.

    Will this guaranteed work?
    http://www.amazon.com/gp/product/B008FO7PQA/ref=as_li_ss_tl?ie=UTF8&camp=1789&cr eative=390957&creativeASIN=B008FO7PQA&linkCode=as2&tag=solyoutec-20

  • Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

    Hi my Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

    Please include your Mac model and OSX in your profile, as it will help the community to help you.  Thanks and welcome to Apple Communities.

  • I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?

    I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
    so i'm using the usb mouse

    I want to clarify the issue.
    The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
    With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
    Post here with your results!!

Maybe you are looking for