DFSR - This member is waiting for initial replication for replicated folder SYSVOL Share - How long should it take?

Yesterday we were forced to perform a non-authoritative sync of the SYSVOL folder as replication had stopped because one of the DCs had been disconnected from it's replication partner for more than 60 days (caused by a unexpected shutdown and we did not
pick up on the fact replication had stopped until now).
I performed the non-authoritative sync of the SYSVOL folder and now the folder is in state 2
ReplicatedFolderName  ReplicationGroupName  State
SYSVOL Share          Domain System Volume  2
and has been for more than 12 hours.  The DFS replication health report, reports "This member is waiting for initial replication for replicated folder SYSVOL Share".
How long should it take and is there anyway to force it so that replication can resume?

I'm fairly sure it's not tombstoned.  Here is the DCDIAG output:
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = RC-CURDC-02
   * Identified AD Forest. 
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\RC-CURDC-02
      Starting test: Connectivity
         ......................... RC-CURDC-02 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\RC-CURDC-02
      Starting test: Advertising
         ......................... RC-CURDC-02 passed test Advertising
      Starting test: FrsEvent
         ......................... RC-CURDC-02 passed test FrsEvent
      Starting test: DFSREvent
         There are warning or error events within the last 24 hours after the
         SYSVOL has been shared.  Failing SYSVOL replication problems may cause
         Group Policy problems. 
         ......................... RC-CURDC-02 passed test DFSREvent
      Starting test: SysVolCheck
         ......................... RC-CURDC-02 passed test SysVolCheck
      Starting test: KccEvent
         ......................... RC-CURDC-02 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... RC-CURDC-02 passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... RC-CURDC-02 passed test MachineAccount
      Starting test: NCSecDesc
         ......................... RC-CURDC-02 passed test NCSecDesc
      Starting test: NetLogons
         ......................... RC-CURDC-02 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... RC-CURDC-02 passed test ObjectsReplicated
      Starting test: Replications
         ......................... RC-CURDC-02 passed test Replications
      Starting test: RidManager
         ......................... RC-CURDC-02 passed test RidManager
      Starting test: Services
         ......................... RC-CURDC-02 passed test Services
      Starting test: SystemLog
         A warning event occurred.  EventID: 0x000003FC
            Time Generated: 06/12/2014   18:26:05
            Event String:
            Scope, 10.59.96.64, is 83 percent full with only 7 IP addresses remaining.
         A warning event occurred.  EventID: 0x000003FC
            Time Generated: 06/12/2014   18:26:05
            Event String:
            Scope, 10.59.98.0, is 95 percent full with only 5 IP addresses remaining.
         A warning event occurred.  EventID: 0x00000560
            Time Generated: 06/12/2014   18:26:05
            Event String:
            IP address range of scope 10.59.96.64 is 83 percent full with only 7 IP addresses available.
         A warning event occurred.  EventID: 0x00000560
            Time Generated: 06/12/2014   18:26:05
            Event String:
            IP address range of scope 10.59.98.0 is 95 percent full with only 5 IP addresses available.
         A warning event occurred.  EventID: 0x000016AF
            Time Generated: 06/12/2014   18:39:43
            Event String:
            During the past 4.23 hours there have been 95 connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. Those clients, therefore, have undefined
sites and may connect to any Domain Controller including those that are in far distant locations from the clients. A client's site is determined by the mapping of its subnet to one of the existing sites. To move the above clients to one of the sites, please
consider creating subnet object(s) covering the above IP addresses with mapping to one of the existing sites.  The names and IP addresses of the clients in question have been logged on this computer in the following log file '%SystemRoot%\debug\netlogon.log'
and, potentially, in the log file '%SystemRoot%\debug\netlogon.bak' created if the former log becomes full. The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text
'NO_CLIENT_SITE:'. The first word after this string is the client name and the second word is the client IP address. The maximum size of the log(s) is controlled by the following registry DWORD value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize';
the default is 20000000 bytes.  The current maximum size is 20000000 bytes.  To set a different maximum size, create the above registry value and set the desired maximum size in bytes.
         ......................... RC-CURDC-02 passed test SystemLog
      Starting test: VerifyReferences
         ......................... RC-CURDC-02 passed test VerifyReferences
   Running partition tests on : curriculum
      Starting test: CheckSDRefDom
         ......................... curriculum passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... curriculum passed test CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running enterprise tests on : riddlesdown.local
      Starting test: LocatorCheck
         ......................... riddlesdown.local passed test LocatorCheck
      Starting test: Intersite
         ......................... riddlesdown.local passed test Intersite
Eveything is passing, except for the bits about the SystemLog and DFRS, all seems good to me.
Event 2213 is in the logs.  I will look and changing the MaxOfflineTimeInDays and see if that gets it going.

Similar Messages

  • HT4718 am trying to install OS X Lion for the first time. So far it has been downloading for about 2 hours. How long should it take?

    Can anyone help please?
    Lion download to iMac has been running for about 2 hours and is still not halfway yet. How long should it take? should I cancel and start again?

    1500Kbs is 1.5Mbs. That is Kilo bits per second. There are 8 bits to a byte so if you divide 1500 (or 1,500,000) by 8 you get 187500 bytes a second. Divide 3.5GBs (3,500,000,000), that capitol B is for Bytes, by that 187500 you get 18666.666 seconds. Which needs to be divided by 60 to get the minutes and then again by 60 to get the hours.
    5.1851xxx hours.
    I use to have a 3Mbs DSL connection and it took me over 3 hours to download Lion. Now that I have a 19Mbs Cable connection it take about an hour to download and install.
    So wait it will happen eventually. If you cancel and start again your are still going to wait 5+ hours.

  • How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?

    Guys,
    How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?
    I have an RVS-4000 and it sends me error message by email on errors. Yet I do not have any documentation on what these error messages mean. I asked these question last May and still have not received any answers.
    I was told it had been forwarded to a engineer for creatation of this documentation in May. Here we are...
    Do any of you agree we need this type of documentation on our Routers? I think it should have been created before these where sold and included with these Routers. Maybe if we all voted on it. Then It might still happen?
    Please add you reply's to this. As it might help to get things moving...
    Bruce

    I created a track on my computer and added it to iTunes
    iCloud only syncs and stores purchases from the iTunes Store.
    "With iCloud, the music, movies, TV shows, and other iTunes content you’ve purchased are available to download to your devices". 
    Apple - iCloud - All your content on all your devices.

  • My iPhone 5 has been dead for weeks.. I just now found it and I plugged it in.. How long should it take for it to turn on?

    My iPhone 5 has been dead for weeks.. I just now found it and plugged it in, how long should it take for it to turn on??

    I think that the battery is dead because , if you don't charge it for a long time the battery will ruin. You must wait, with the charger plugged, for a long time to turn it on. it could be also a worse problem and you have to replace your battery

  • HT1766 How long should it take for a icloud back up of about 6.4GB?  It has been running all night and not complete.

    How long should it take for an icloud backup of about 6.4GB?  I selected a manual backup and it has been running all night?  Thanks         

    That's going to depend alot on your internet connection speed. 6.4 GB is alot of data, especially if your connection speed is slow (DSL) or low-end cable speeds of ~1.5 Mbps.

  • How long should it take for the iOS 5 iPhone software to update?

    How long should it take for the iOS 5 iPhone software to update? Mine is taking a ridiculous amount of time, to the point where I need to stop it as i need to go out and need my phone !

    Depends on how strong your wifi connection is.
    you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

  • Asset encoding has been showing for almost 12 hours now. How long should it take?

    How long should it take to burn a 27 minute movie. It states that it is encoding video with 1 minute left. Has been that way for 9 hours now.Any suggestions?

    Hi
    Encoding time depends on several things (mosty common are)
    • Free Space on Start-Up (Mac OS) get's low eg less than 5Gb - and encoding time get's stupidly long
    I never go under 25Gb free spae
    • What You feed iDVD. Some Codecs/Fileformats just get's encoded stright of - but others needs to be converted first (re-coded) by iDVD first - can also take eons of time.
    So Please tell where Your material came from and in what Codec/File format
    • What Mac was Used to encode. My Mac G3 600MHz - took about 30 hours per hour movie. My dG5 2GHz was close to 1:1 - My new MacBook Pro 2.2GHz i7 - Have not tried yet - May be even faster ?
    Yours Bengt W

  • HT4859 How long should it take to back up iphone for the first time with about 6 gigs?

    How long should it take to back up iphone for the first time with about 6 gigs?

    Welcome to the Apple Community.
    The first back up to iCloud may take some considerable time. Just how long isn't really possible to say without knowing how much is in your back up and your connection speed.
    What many people don't realise is that upload speeds are often significantly less than download speeds, so for example a user may have a download speed of 40 Mbps, but only 1 Mbps for uploading. As a rough guide it will take around 2 ¼ hours to upload 1 GB of data at 1 Mbps.

  • How long should it take for 42 pictures to "finish download"

    how long should it take to "finish download" for 42 less than 12 mb pictures to my iMac from my iPad?

    mcziggy,
    What model iMac do you have, please. Is it iMac 7,1 or later?

  • How long should it take for my mountain lion to download? its been almost 12 hours, how long should it take for my mountain lion to download? its been almost 12 hours

    how long should it take for my mountain lion to download? its been almost 12 hours, how long should it take for my mountain lion to download? its been almost 12 hours

    Welcome to Apple Communities
    The Internet connection can do it slow or fast. If it's slow, it will take more time

  • How long should it take for a new vault to be created?

    I have a late 2009 27" iMac i7 with 16GB of RAM. I use referenced masters. The masters are located on a Drobo connected with FW 800. The internal drive on the iMac is a 1TB drive. The Aperture library is located on that drive and is 158.39 GB. I have about 110,000 master images. Most of them are RAW files shot with a succession of Nikon bodies (D100, D200, D300, and D400). I am in the process of moving a vault off of the Drobo and onto another external hard drive. I started the vault creation on Friday morning (3 days, 6 hours ago) and Aperture shows that it is still working on it.
    I have read the germane threads and have given it over three days now to complete. There is very little, if any, progress on the visual indicator that the task is nearing completion. It shows the job as about halfway done. However, Aperture still shows as responding in the Force Quit menu. Aperture is currently using up 11.2 GB of available RAM. Normally, I don't have any memory swaps. Now, page ins are 13,418,681, page outs are 7,226,523, and swaps are at 43.70 GB. CPU utilization shows Aperture consistently at about 170% of capacity.
    I really don't want to force quit Aperture for fear of what state it might leave my database. On the other hand, I need my machine and I can't use it until this process finishes or I force quit it.
    How do I know if Aperture is actually doing something or is it stuck in an infinite loop? What are the repercussions of doing a force quit? How long should I wait to see if it will actually finish on its own accord?
    Any insights, comments, or solutions would be greatly appreciated.
    Rick

    Rick-
    You are not being ignored. I for one just do not know what to say because it depends on how badly you need the use of the Mac and how at-risk your data are. One thought would be to just use the Mac (letting Aperture page out while other apps use the RAM) but that is a risk if the RAM is frozen for some reason. It does sound like you may have a memory leak.
    HollidayPhotography wrote:
    iMac i7 with 16GB of RAM. I use referenced masters. The internal drive on the iMac is a 1TB drive... ...I am in the process of moving a vault off of the Drobo and onto another external hard drive.
    What I do not understand is what you mean by "moving a vault off the Drobo." I would think that if you are making a new Vault that would involve the internal drive and the new drive, no major interaction with the very slow Drobo except to point to Masters there (I could be wrong).
    Also could some of your files be managed on the Drobo rather than referenced?
    -Allen

  • I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

    I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

    Triple-click anywhere in the line below to select it:
    tmutil compare -E
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
    Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

  • HT4796 how long should it take to transfer this material from a PC to my Mac?

    How long should a data migration from a PC to my Mac take?

    ned burns wrote:
    How long should a data migration from a PC to my Mac take?
    Depends how much data you have.
    And how you transfer it, if you chose wireless (for the convenience) you have chosen the slowest possible method, hours will pass.

  • Mailing off macbook for repair--how long should it take?

    Sometime next week I will be mailing off my macbook to have the optical drive replaced under warranty. Since I'm mailing it to some shop in Texas and I'm not taking it to an apple store, I assume they will have the parts on hand and will fix it immediately--by the day after they receive it--right?
    For those of you who HAVE mailed off your macbook for repair: how long did it take to get it back? A week? 2? 3?
    Thanks!

    The place you're mailing it to in Texas is one of the main facilities where Apple fixes portable computers in the US. Their turn around time is typically same day, or usually within 24-36 hours. Factor in shipping to and from (Sundays if involved) and you'll get your machine, barring any shipping incidents within 5-7 days (or less).

  • How long should it take to upload pictures for iPhoto books

    I have created a book for Christmas on iPhoto.  The book is 100 pages.  There are two steps to the process of sending in your order.
    1.  Assembly (which it assembled no problem, under 30 min)
    2.  Upload (it shows a bar and a blue line moves as it uploads)
    I have been uploading for 2 days now and I am 1/4 of the way there.  Now while I am waiting for it to upload I cannot do anything with my iPhoto pictures.  Which is a problem since I take pictures for my school and I need to edit pictures by Tuesday.
    It states under the "Uploading book to the store...."  Note: Any interruption of the upload process will cancel your order.
    I have enough memory that this should not be the problem.  I have turned off every application, restarted my computer, checked for updates.  Nothing helps.  I have had to cancel this order 3 times now and restart the process as I needed to use iPhoto for school projects.
    This should not take more than 2 days!  What is going on?  Any help would be wonderful.  Thank you
    Kara
    OS X Yosemitie
    Version 10.10.1
    2.66 GHz Intel Core 2 Duo

    Two days is way too long for the upload, unless you are having a very slow Wi-Fi.
    There may be a something interfering with your connection to the Print Products Store (Anti virus software, firewalls), or you have included unprintable items.
    Is the PDF preview of your book correct? Make a review and check it carefully for missing items, see this help page:
    iPhoto, Aperture: Previewing an order in iPhoto or Aperture
    If the preview is alright, try to upload your book again in Safe Mode. That will disable non standard extensions, and prevent them from interfering with your connection to the Print Products Store:
    See: Mac OS X: Starting up in Safe Mode

Maybe you are looking for