DFU and Restore does not work
Firstly, I would like to point out that I am using the latest version of iTunes.
My girlfriend gave me her phone to fix. She has tried to install iOS 7 which does not appear to have worked and she did not make a backup.
When the phone is switched on, the 'Swipe to Setup' message appears. You select a language etc and then are greeted by a message advising to connect the phone to iTunes. When you do this, iTunes basically advises that there is an issue.
I sucessfully started DFU mode and iTunes then recognised that there was a phone in recovery mode and shows the restore button.
After clicking the initial resore button, I am then offered the 'Update and Restore option which I selected.
iTunes then shows the phone being restored:
Restoring iPhone software...
Verifying iPhone Software...
Verifying iPhone Restore...
Restoring iPhone Firmware...
It then tells me it is complete and to leave the phone connected which I do. After a few minutes, iTunes detects the phone and tells me once again that there is an issue. The phone itself, as before; shows the 'Connect to iTunes' message after going through the initial setup of language etc.
Can anyone offer any advice as to what is going wrong with this?
I have tried this procedure no fewer than seven times and it is becoming quite frustrating.
Any help would be very much appreciated.
Go elsewhere. JB voids the Apple warranty and means you will get no support from Apple, including from this Apple forum.
Similar Messages
-
Loss of sound (Hard-reset and restore does not work)
Hi,
I loss all sounds on my iPad 2 (currently on iOS 7.04). This is the 2nd time I have had this issue (had it with an earlier iPad) and had to replace the previous one (out of warranty period). Very frustrating as it is about the same time period after purchase. Last time, it seemed like a repeated fault with the iPad and I cannot believe I have the same issue again on a different product. It is an expensive way of having to re-buy every couple of years for no other reason.
It did not happen immediately after an update i.e. it does not appear to be "update" or iOS version-related.
Anyone got any advice please? The facts are as follows (and what I have tried).
When it happened?
I was in iMovie editing a movie when all sound went from the speaker. It continued to work with earphones plugged in, but this is now intermittent. I have no sound on the speaker at all except for when I click sounds on the menu and change the level of ringer alert (which works on the speakers). This seems to tell me that it is a software problem. I have no sound on any applications or internet video or music from iTunes. I cannot survive on the earphones as they only work for a period of time and then they fail (until I take the jack out again when it works again for a period of time before the headphones fail again).
What have I tried?
a) Numerous hard resets
b) changing the side switch's position
c) changing in general settings the side switch settings from lock rotation to mute and back again (repeatedly and in reverse to see if it makes any difference)
d) resetting all settings - this made no difference
e) erase all content and settings - interestingly at the stage when it asked me if I wanted to restore from an iCloud account, it was making sounds (the keyboard clicks - which don't make a sound irrespective of the click setting currently) i.e. appeared to have resolved the issue and as soon as I restored my iCloud back-up, the sound went again.
I would be grateful for any suggestions. This post also includes a recommendation to Apple on improving its product (relating to iCloud backups) as the ultimate solution should not be paying for a replacement for a software issue (to avoid losing all my data permanently).
My musings are that:
a) it is definitively a software issue (on account that the speakers work in certain situations only)
b) it appears to be that the software is corrupted in my iCloud back up
c) it is an issue that happens regularly and is an avoidable issue/cost to Apple's customers that needs to receive higher priority in being addressed as it is built in redundancy for a significant proportion of customers. At the very least, iCloud backups should be capable of being restored in part - is there any way this could be done so we don't lose all of our notes, media etc if the final advice is to "start again". How can it be right to lose all content because of an Apple system software issue? I am pre-guessing this will be the final advice (if I don't want to pay for a replacement iPad)?
Please help me and all those others with the same avoidable software problem.
Thank you,
PeterThis is an iPad user to user forum, so you are not addressing Apple.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
Iphone update not successful and restore does not work
I tried to install the latest iphone update and received a message that it was unsuccessful and I had to restore my iphone. Now, restore is unsuccessful. My phone displays an image of a cable disconnected from itunes and CD. What next? I'm dead in the water.
I had the same "unknown error 2001" every time I tried to restore the iPhone. It would detect the unit immediately in "recovery mode" but fail to restore with that error.
Then I tried this:
"+Before the iPhone is detected, but whilst connected to the computer, press on the home button and keep it pressed down until a message appears to say that a phone has been detected in recovery mode, then follow the steps indicated. It may take about 30 seconds, so don't let go."+
As suggested above (thanks, you are a savior) and it worked. I also charged the unit from the AC (not usb) for a while and restarted the PC before trying the above mentioned method. Also, I connected directly to the USB port with the cable, avoiding the "hub" thingy that comes with the phone.
Thanks! and hope that helps... -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?
Make sure the silent switch is not set to mute. If you can see the red dot, it is on mute.
It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
The next step would be to restore as new.
If none of that works, a warranty exchange would be the resolution. -
my iphone 5 bluetooth not connect to my hands free or parrot i have been using iphone 4s with 6.0 software always worked now called apple no help so i restored my iphone 4 with 6.00 net work and that does not work i then tried my daughters iphone and blackberry and they connected
I then tried i phone 5 in my daughters and sons car and no luck. I cant get help from anyone its a jokeI found the solution to your problem. It solved mine right away and now I'm able to upload videos directly from my iPhone.
Go to this thread: https://discussions.apple.com/message/17366529#17366529#17366529 -
My iphone 5 has 7GB, went to apple store the guy said my backup that I was restoring from was corrupted so I have to restore it as a new phone wondering that if I do this and it does not work, will iTunes have my old backup saved?
Yes, if you have been backing up on a regular basis.
If this is your first time backing up, then no.
you can check edit - preference - backup - see what is listed -
Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.
Did your computer crash or did Firefox crash causing the loss of the bookmarks?
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes -
IPhone 4s: Slide wifi is not selectable. Always gray and wifi does not work!
i have Slide wifi is not selectable iPhone 4s. Always gray and wifi does not work.
Help me!You most likely have a failure of the WiFi chip.
Restore the phone as a new device. If that doesn't solve your problem, you'll have to bring your phone to Apple for replacement. If you are not within the warranty period, expect to pay $199 for out of warranty replacement. -
Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, SeriouslyQuestion:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!
-
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.
Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
Just a guess. -
Purchased an App and it does not work. How can I get a refund for it.
I purchased an app for my son, for his ipad and it does not work. Halo Waypoint for $5.99. When you log in, it just starts loading then an message saying "Sign in Trouble, we couldn't sign you in to Xbox live. Your windows Live ID information is correct, but Xbox Live is unavailable. PLease try again later. We have been trying to for the past 4 days. Reading the reviews it appears that several people have the same problem. So how can we get our money back?
pituiri wrote:
I purchased an app for my son, for his ipad and it does not work. ...
Contact the Developer of the App...
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I bought IPROXIFY throught APP STORE and it does not work. I contacted the creator and he has not answered.
How can I get my money back? and please take him down of your page as we (users) think that we are buying products that worked backed up by MAC.
Looking forward for an answer in order to keep buying in APP StoreThis article may clear up some confusion you may have regarding third party developers and Apple.
The Mac App Store Discussion, what is it for?
Maybe you are looking for
-
Unable to view document header text in MB51
When creating a stock transport order in MB1B we are entering information into a field labeled "document header text". Then when running MB51 in the column labelled document header text nothing appears unless we enter under a specific movement type.
-
Export/Import to Excel in HFM (11.1.2.2.3)
Hi guys, My client asked me if he could export a data grid, modify it and the import it to HFM again... I believe that could be done with previous releases, but not quite sure with versión 11.1.2.2. Could you please confirm? Thanks! Jay
-
hi all, i m using oracle form 10 g with oracle database 10g and how can i upload a pdf file in database by using forms Thanks to all
-
VB6 Crystal Reports 8.5 - RDC Component to Export Reports To Printer
Hi, We have an application written in VB6 that uses the RDC in Crystal Reports 8.5 to export reports the printer. We are currently making some security changes to lock down several of our servers. Currently our custom print queue for Crystal runs i
-
Alt key make my keyboard stop working
I have notice this in photoshop,most time i hold alt key.it make the keyboard stop working,until i do restart,Now it happening in mac..when i try to view my library by holding the alt key in finder...my keyboard stop working anyway to fix this?