DFU mode Recovery

Hi, Guys
               Guys i have a question for you. suppose if i have lost my iPhone 5s and someone use iTune for recovery but it will first ask to disable "Find My iPhone". But suppose if some recover it with DFU mode then what will be happen, it will again ask for to disable "Find My iPhone" or not. or if someone use a third party software for DFU mode recovery then what will happen? i hope you will understand what i am trying to find out.........

Hello Saqib,
It sounds like you have questions on what would happen if someone were to put the phone in recovery mode and then restore the device. They would run into the Activation Lock that will prevent the phone from activating unless you sign in with your Apple ID information. Here is some additional information on Activatoin Lock for you:
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
With iOS 7 or later, Find My iPhone includes a new feature called Activation Lock, which is turned on automatically when you set up Find My iPhone. Activation Lock makes it harder for anyone to use or sell your iPhone, iPad, or iPod touch if it’s ever lost or stolen.
With Activation Lock, your Apple ID and password are required before anyone can:
Turn off Find My iPhone on your device
Sign out of iCloud on your device
Erase and reactivate your device
And:
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/ht5818
Thank you for using Apple Support Communities.
Cheers,
Sterling

Similar Messages

  • IPod Help needed from serious Apple gurus - iPod Touch 2g 16g stuck in restart loop. Will NOT enter DFU or recovery mode, NOT recognized by iTunes on Windows or Mac

    Ok, so here's the not so sad story. I bought an iPod Touch 2g 16g through Ebay - so forget warranties. Luckily I did not pay much. The description said it was stuck on the apple logo, so I figured it would be an easy put into recovery mode and restore problem.
    Not so much.
    If you plug the iPod in and charge up the battery the LCD will come to life after a while with the apple logo, then it displays the spinning wheel with the apple logo over it. That will last anywhere from 10 - 15 minutes, then the iPod will go blank for a few secs and then start up the cycle all over again.
    As stated, this iPod will NOT enter either DFU or recovery mode and believe me I've tried it several times several different ways with different timings, connected via USB to a Mac, connected to a different Mac running Windows, and connected to just the charger. Nothing. Occasionally the screen might go blank while holding the power and home buttons but nothing else happens and then it starts it's usual cycle again.
    Again, iPod NOT recognized by iTunes on either Mac or Windows side. Since I got off Ebay and seller didn't know much about it, I have no idea if someone tried to jailbreak this or not.
    I will not put much money into this machine. So I guess my question is: does this behavior mean that the motherboard is clearly fried? Are there any software programs that might diagnose what the problem is? Could it be as simple as a fried battery?
    And most importantly, is this iPod simply toast or is there anything anyone can suggest????
    Really any suggestions would be greatly greatly appreciated. Seems a shame to just trash an iPod touch that might need a simple fix...
    If it helps matters, I can tinker with iPods somewhat and have torn down and replaced several iPod touch 1g and 2g glass and digitizers with no problems. I'm somewhat software savvy but the whole jailbreak thing is new territory... and I can't really figure out the command in Windows or Mac terminals to list all connected devices so I have no idea if the computer even knows the iPod is there, even if iTunes doesn't. Guess that's it... ummm, please help???

    Nothing huh? No one's had this problem or this isn't fixable... oh well... if anybody comes up with anything I'll check in occasionally...

  • My brother's iPod was disabled for 23 million minutes then my dad fiddled with it. Now it's stuck in recovery mode and wont connect to my computer or go into DFU mode. How do I fix it?

    It's an iPod touch 4S, white.
    I've tried on various computer types (windows, macs, and even a linux) and nothing. None of the computers even recognized a device being plugged in.
    I know it's not the cable, our other idevices use that one fine (I bought several more to be sure and no luck).
    My dad is at his wits end and I want this insanity to end. Help please.
    It's been locked so long I don't know what iOS it's on.
    Dear god, what did my brother do.

    See what you missed here:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I have a 3gs. I tried to update the ios today. Now my phone is stuck in recovery mode and itunes is not recognizing. I also tried DFU mode, still nothing. I have uninstalled itunes and reinstalled. Help.

    I have a 3gs, and I haven't updated it for a long time because I always have issues when I do. I tried to update the ios today, and it decided to update it to 6.1.3 instead of 7, I didn't think there would be a problem, so I clicked ok. When I came to check on my phone, itunes said there was an error with the update, and my phone was in recovery mode (plug-in sign on the screen). I looked up multiple things to try, I tried putting it in DFU mode, still itunes doesn't see it. The computer also doesn't list it under devices, however when it is plugged in the Apple Mobile Support USB Driver shows up in device manager. I have tried uninstalling itunes and reinstalling, still nothing. I just want to know if there is anything else I can try. Thanks.

    No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.

  • [win 8] itunes not detecting iphone in DFU mode for restore/recovery

    Here is the story:
    Had my iphone 6 plus for about a month now. Today I hooked it up to my windows 8 machine and itunes (both fully updated to latest versions).
    Phone was detected fine, so I ran a full sync and backup to my local machine with itunes. No problem its all good.
    Then went to the updates section and it said I had a new one (8.1.2 or whatever I cant remember)
    I ran it, in itunes while the device was connected.
    It downloaded and was going through the install process... then the screen on my phone went to the "connecting to itunes" graphic (with the cord and the itunes app icon). Thats where it sat.
    So now it no longer appeared as a device in itunes either.
    OK... went to the forums.
    1) Tried all the reboots and uninstalls/reinstalls
    2) Tried booting and connecting in "Recovery mode" (default now as all I see is that connecting screen)
    3) Tried booting and connecting in DFU mode
    Neither mode was detecting the device with itunes but I am getting the chimes of connection for windows itself.
    I do see the device in my windows system hardware under "unspecified" as "Apple Mobile Device USB Driver" (and when i view details its model shows either Recovery or DFU mode depending on how I booted the device)
    So here I am... stuck with a phone in either DFU mode OR recovery mode on a botched ios update and itunes wont detect it on windows 8.x
    What can I do ?
    Looking for some creative or outside the box ideas here. I just want a reset and restore of the backup I made on local itunes today.
    If I can get the device back to even a factory reset, I am hoping itunes will detect it properly and can run a restore from it local storage.
    Really stuck and been on this for hours now.

    Hello joeldevil,
    I know you have tried uninstalling and a reinstall of iTunes, but have you checked out the additional troubleshooting steps to check the drivers to make sure that they are installed. There is also a section for what to do when your iPhone is in recovery mode and not seen in iTunes. One more thing you can try is to try your restore in another user. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/en-us/TS1538
    Regards,
    -Norm G. 

  • HT201263 My ipad will not show the recovery mode, it goes into DFU mode just fine, but whenever I put it in recovery mode I get nothing but a blank white screen. After doing a restore or update itunes gives me error 37. This all happened due to a failed u

    I updated from ios 5.0.1 to 5.1. Midway through the update itunes crashed. I got it all working again and ever since I have been stuck in a recovery loop. DFU mode works fine, but when I go into recovery mode (yes I am doing it right, yes I have tried pwning, tinyumbrella, etc.) it still just gives me a white screen (I am not getting the plug arrow and itunes icon screen that shows up when you are in recovery mode). I am a huge fan of hacking, mods, and jbs, BUT have never done any on the iPad, (found it pointless).. nevertheless, I am stuck thanks to apple in a white screen and a nonworking iPad. If anyone has any ideas that does not include jbs, updating, restoring, restoring with internet off, restoring in DFU, I would gladly appreciate it. I would take it to the apple store but it was a friends and I didn't purchase it. My friend had the issue formerly and they had no idea what to do at apple (they usually try DFU, restore, and then have nothing else to tell you.

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Iphone in recovery mode and DFU mode but PC still doesn't recognize device

    HELP! My iphone 4 just keeps blinking the apple logo for hours! I tried the recovery mode and DFU mode, the first time went well, but it started to blink again after I restored it. Now I'm doing the same steps going to recovery mode and DFU mode, they work on the phone but for some reason, my laptop doesn't recognize any device connected. I tried everything on the internet and still wont work. WHAT CAN I DO???
    by the way, Mine is windows 7.

    it needs repair
    Peace, Clyde

  • How to save your photos after upgrading to iOS 6 OTA and stuck in DFU or Recovery Mode

    Ive been working on this all day. I found somebody's JAR that is able to provide SSH acess into your phone even if you are stuck in recovery or dfu mode. I am running a macbook pro with win 64 bootcamp and couldnt get itunes 32 bit installed to work with the JAR so I restarted in MacOS rather than mucking around with getting itunes 32. I then clicked the JAR and mac asked to install a java runtime. After doing this, the JAR would run and eventually put my phone into a state where I could SSH into it. After that, I downloaded Cyberduck and copied /mnt1 and /mnt2 to my mac in case I needed anything off of these. I ran PhotoRec and it began to find tons of pictures, pdfs, and whatnor. Rather than wait for it to find the stuff I really wanted, I searched through /mnt2/mobile/media/dcim/ and got all my pics. Awesome. What a pain.
    That took all day to figure out. Ugh.

    Sorry, the link to the JAR is http://www.ifans.com/forums/threads/ssh-working-on-ios-6.377392/

  • Iphone will not respond after trying to put it into DFU mode while in recovery mode.

    I tried to restore my iphone 4 and recieved error 21 in itunes, while in recovery mode I tried to put it into DFU mode and then it turned off and wont turn back on or be recognized by itunes or pc. I tried doing a hard reset and no luck. HELP PLEASE!!!!!

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • HT201263 Hi. I forgot my passcode and now I am unable to unlock my ipod. I tried restoring it using itunes in recovery mode as well as dfu mode but it says unable to restore,unknown error occured (3004).  Please help me out. My ipod is locked for one hour

    Hi. I forgot my passcode and now I am unable to unlock my ipod. I tried restoring it using itunes in recovery mode as well as dfu mode but it says unable to restore,unknown error occured (3004).  Please help me out. My ipod is locked for one hour now.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • Can't recovery iPhone 4S even in DFU mode

    My I phone stuck in recovery mode and can't boot after blackout during iOS upgrade.
    I put it in DFU mode and trying to restore via itunes.
    It go through every steps just that progress bar stuck at 10% after I leave it over night.
    Is there a way to resolve this by myself since there's no apple store in my current area.

    fixed by manually download ipsw file then hold shift key+click restore in itune (DFU mode)
    make sure to double check ipsw hash value since there are many sources of them and seem like I download the corrupted one before.
    wondering why itunes let its pass verification and try to restore with that.

  • TS1538 i hanve an i phone 2g and it is stuced in recovery mode it is not going in dfu mode it is purchased from usa what shoud i do??

    i hanve an i phone 2g and it is stuced in recovery mode it is not going in dfu mode it is purchased from usa what shoud i do??

    If it's an original iPhone, you may as well dispose of it responsibly and buy a new phone. Apple stopped servicing them a while ago.

  • Iphone 5C won't charge, turn on OR go into recovery or DFU mode. What's happened?

    My work phone (iPhone 5C) was working perfectly (never had a problem charging it or any other problem) last week until I let it run out of charge. When I charged it yesterday (left it on charge all night) it won't charge or turn on. It also won't reset (power button & home button) and it won't enter recovery mode or DFU mode. I know my charger is working as it chargers my partner's iPhone no problem.
    It was working perfectly so I'm not sure what has happened that means it won't turn on. I have a complete black screen that doesn't change at all - no apple logo, no symbol to tell me it needs to be charged, nothing - just a black screen.  
    Can anyone help or explain what might have happened? Please! Thank you
    Update - Also, obviously my computer does not recognise that anything is plugged in.

    It would seem like a hardware failure
    I would take it into an Apple store or authorized reseller for further trouble shooting

  • HELP.!! iphone 3gs not detected in windows 8 even in dfu and recovery mode?

    i have an IPhone 3gs which was working fine and one day computer ,after connecting my iphone there was no beep sound and no disk drive. and itunes and other softwares are not detecting it even though it is charging fine.
    i have tried different computer and different wires.
    i have windows 8 with latest itunes and latest software installed in device manager.
    i have tried putting it in both dfu mode and recovery mode.
    P.S : it is jailbroken and factory unlocked. and i live in PAKISTAN where there is no apple customer care.
    Need help as fast as possible please...

    Two Days and no reply :/

  • Can someone explain what recovery mode and dfu mode are?

    title says it all.

    The main difference between DFU mode and Recovery mode is the iBoot bootloader. iBoot tells the iPhone/iPod touch/iPad what to do when it turns on, eg. load up iOS version whatever (for me, still 4.2.6 on my Verizon iPhone). When you upgrade your device's firmware, it goes into recovery mode.That way, iBoot can make sure you're flashing into a firmware that's equal to or greater than the current version of firmware you have installed. When you enter DFU mode, there isn't this limitation, so you can flash any version of iPhone OS/iOS that you want, provided the device is compatible with it and Apple is still signing for it.
    If this answered your question, tell me. If it didn't, well, tell me and I'll add more!
    Hope I helped!
    --CS

Maybe you are looking for

  • Can't load or rebuild iPhoto library

    My iPhoto library hasn't been appearing. I've tried going through the 4 repair options (that show when I open with Command+Option) and have tried the rebuild a few times now. Each time I try to rebuild, it stalls at the same place (pic attached). Fro

  • I converted a PDF document to word.  How do I unlock this document for editing?

    How do I unlock a document for editing if it is in read only form?

  • Disk Utility and fsck report 'missing thread records' and can't repair.

    Hello, What first made me realise there was a problem with my iMac was that when I tried to update a application it failed. I then manually download the .dmg of the update and tried replaced the app (Transmission 1.82 being that app in question). Thi

  • Nested table in ALV grid

    Hi all i have the following types: <begin of type1, fieldA type i , fieldB type i, <end of type1, <begin of type2, fieldC type i fieldA type i, <end of type2, <begin of type3, fieldA type i, fieldB type i, fieldC type i, <end of type3, <begin of type

  • Extraction Issue

    Hi All I have activated the HR Cube - 0PAPD_C02 ( Appraisal) . All the master data was loaded. For the relevant datasource 0HR_PA_PD_2 in RSA3  - 358 records were selected. Yet when the infopackage was scheduled no data was loaded ? error message was