DFW CC Release – 8/2013 Update is not applicable. Error Code: U44M1P28

Dreamweaver CC Release – August 2013
Update is not applicable. Error Code: U44M1P28
Everytime I log in, it says an update is available..
Anyone have any ideas?
It downloads fine but then on install it gives this error. I also have DW CS6 on my system.
Also says "Install" on DW CC in the App manager, not "Installed" which I think it used to say for the suite...
Mac 10.8.4

Similar Messages

What to do with "Update is not applicable" error when install the InCopy 7.0.5.562 patch on window?

Hi,
I had InCopy 7.0.0.354 window version, and would like to upgrade to newer version.
After install the InCopy 7.0.5.652 patch, there is this "Update is not applicable" error.
The InDesign 7.0.5.652 patch installs (my old InDesign is 7.0.0.354) with no problem.
I also tried to remove my InCopy 7.0.0, re-installed InCopy 7.0.0, but still the 7.0.5 patch has the same error.
Now I have newer version of InDesign, but old version of InCopy, which can't be right for my work.
Does anyone know how to fix it?
I can only use the 7.0.5 patch.
Thanks.

Hi,
I had InCopy 7.0.0.354 window version, and would like to upgrade to newer version.
After install the InCopy 7.0.5.652 patch, there is this "Update is not applicable" error.
The InDesign 7.0.5.652 patch installs (my old InDesign is 7.0.0.354) with no problem.
I also tried to remove my InCopy 7.0.0, re-installed InCopy 7.0.0, but still the 7.0.5 patch has the same error.
Now I have newer version of InDesign, but old version of InCopy, which can't be right for my work.
Does anyone know how to fix it?
I can only use the 7.0.5 patch.
Thanks.

CS5.5 Indesign upgrade won't install "update is not applicable" error

Upgraded to Yosemite, reinstalled legit CS5 InDesign successfully, need to download the upgrade to 5.5 for essential "shared content" plug in... the update won't install "update is not applicable" error w no serial code request, just doesn't install. Indesign 5.0 was working fine, i just need a couple extensions

you can update cs5: http://www.adobe.com/downloads/updates/
but you can't upgrade to cs5.5.
you can upgrade to cs6 or cc (for money).

Frozen ipod after new updates, will not recover, error codes 1601 and 1602

i updated my ipod last night, was working fine, turned off, then on again this morning. was working fine this morning for a while, then went completely blank, will not start up, just completely dead. i have tried to restore,several times and get error code 1601, and 1602. have tried restarting my computer,checking for updates, restarting my itunes, using another computer, tried another lead, and everything else suggested by support. it will just not do anything. has anyone got any suggestions, please.

I would suggest that you put your iPod into the recovery mode and restore it. Next time something like this, it is better to start with the more basic troubleshooting steps first before trying to restore. The two easiest are restart and reset.
Try these steps with your touch.
1. Unplug the device from your computer
2. Turn the touch off - hold the Sleep/Wake button down until you see the red slider and turn the device off. Note: this may not work. If not, go to the next step.
3. Start iTunes
4. Hold the Home button down and keep holding it down while you plug your iPod back into your computer.
5. Keep holding the button down until iTunes tells your "that an iPod in Recovery mode has been detected".
6. Let go of the button and follow the on screen instructions to restore the touch.

PSE 9 update is not applicable; error loading

Hi I am struggling with this after several attempts.
Have PSE9.
Apparently it was shipped with camera raw 6.1 but I can't see it.
Tried downloading 6.3 and followed the instructions eg: unzip, launch Patchinstaller.
But I get update not applicable window or erroe loading updates.
What am I missing?
Hopefully something simple - like me!
Be grateful for help thanks.
ot

After a few more tries I decided to uninstall/reinstall and that has has sorted the problem.
Two updates were availble - pse9 and cam raw - both have now been successfully installed and are working.
Strange things - computers.
Thank you.

Windows update are not install. error Code is 8024200D

windows 8 update are not install...
error Code 8024200D..
please help some body help me for this problem.

Try here. http://windows.microsoft.com/en-us/windows7/windows-update-error-8024200d REO

Release Management 2013 Update 3 doesn't display retry button

When using Release management 2013 Update 3. I do not get a button to retry failed releases. I am viewed one answer on here that states the release needs to be automatically created from a build. I tried that solution and it still does not appear.
I am the Release Manager and I have every permission given to my account. Can anyone help me with this.
Thanks

Hi Release Mgmt,
Thanks for your post.
First, please upgrade your Release Management 2013 Update 3 to Release Management 2013 Update 4. Then run your TFS build to trigger the release template, if the release not be executed successfully, open the release in RM Client>>Releases tab, you
will see that Retry Failed Deployment button. Please refer to the discussions and answer reply in this post:
https://social.msdn.microsoft.com/Forums/en-US/e47c574b-adcc-4f58-8cd5-49c474adcbc8/how-to-repeate-a-release?forum=tfsbuild.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hotfix KB2277439 Says "The update is not applicable to your computer" when trying to install.

We have two Dell Poweredge 710 servers both running Windows Server 2008 R2 Enterprise x64 using Failover Clustering. These servers host a Microsoft SQL Server 2008 database. They are being back up by a EMC Networker.
Recently, we had the active node hang overnight around the same time that the backups run. After further digging into what could have caused the problem, I found some usefull information on our issue in KB2277439 The symptoms described match our situation
exactly:
[VSS] OnFreeze : preparedToBackup 1, freeGumSent 0, snapshotSet fc0641af-a15b-4b44-a147-69a52e8373b5
0000089c.000086e0::2013/10/08-02:14:15.844 INFO [VSS]
OnBackupShutdown - preparedBackup 1, gumsent 0, snapshotSet 4b907950-8316-42f3-9aa2-18040520b383
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS] HandleBackupGum - Initiating the backup
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS] HandleOnFreezeGum - Stopping the Death Timer
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS] HandleBackupGum - Acquiring lock and flushing DB
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS] HandleBackupGum - Completed the backup Request
0000089c.00006f28::2013/10/08-02:14:15.969 INFO [VSS]
OnFreeze returning true
0000089c.000012c0::2013/10/08-02:14:17.638 INFO [VSS]
OnThaw : preparedToBackup 0, freeGumSent 1, snapshotSet fc0641af-a15b-4b44-a147-69a52e8373b5
0000089c.000012c0::2013/10/08-02:14:17.638 INFO [VSS]
OnThaw returning false
0000089c.000012c0::2013/10/08-02:14:17.716 INFO [VSS] OnAbort - preparedBackup 0, gumsent 0
0000089c.000012c0::2013/10/08-02:14:17.716 INFO Current request is Aborted - Context4194304[VSS] OnThaw : preparedToBackup 0, freeGumSent 0, snapshotSet fc0641af-a15b-
The package I downloaded extracted a file named Windows6.1-KB2277439-x64.msu However when I tried installing the hotfix I get an error saying: "The update is not applicable to your computer"
Can someone please explain why this update is not applicable? As far as the KB article says, it's specifically meant for Windows Server 2008 R2 Enterprise x64 with Failover Clustering installed, which is exactly the setup that these servers are running.
Also I have verified that this hotfix had not been previously applied and I'm pretty sure we couldn't have gotten this as an automatic update. Any help with this would be greatly appreciated.

Hotfixes are special, out-of-band patches created to fix specific problems, so they are never published to Windows Update. Often the hotfix gets incorporated into a released patch that is published on Windows Update. If this hotfix was incorporated
into a released patch, and you applied that patch to your system, the hotfix would see that its files are older than the latest files on the system and would give you this message. Because the hotfix is not for general distribution, there is rarely documentation
saying that it has been superceded.
Generally there is a file list with a hotfix/patch that gives you the version number of the affected files. You can go through those files to see that you have the latest files. The problem is finding the actual patch that updated those files.
Without going through lots of patches, it is hard to find which patch made the hotfix obsolete.
.:|:.:|:. tim

RSAT Tools won't install (the update is not applicable to your computer) in build 9926

Trying to install Remote Server Administration Tools in Windows 10 Technical Preview build 9926
Downloaded WindowsTH-KB2693643-x64.msu
Gives error "the update is not applicable to your computer"

Hi SeanSauve,
The below is the information I quoted from the system requirements part on the download page:
Supported Operating System
Windows 10 , Windows 10 Tech Preview , Windows 8.1
**Remote Server Administration Tools for Windows 10 Technical Preview can be installed ONLY on computers that are running the second release of Windows 10 Technical Preview.** Remote Server Administration Tools cannot be installed on Windows
RT, computers with an Advanced RISC Machine (ARM) architecture, or other system-on-chip devices.
Remote Server Administration Tools for Windows 10 Technical Preview runs on both x86- and x64-based editions of builds 9926 and later releases of Windows 10 Technical Preview, including all updates. This release does not run on Windows 10 Technical
Preview builds that are older than 9926. Download and install the version that matches the architecture of the computer on which you plan to install the administration tools. If you are not sure whether your computer is x86- or x64-based, see
How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
Remote Server Administration Tools for Windows 10 Technical Preview is available only in United States English (en-US) for this release.
IMPORTANT: Remove all older versions of Administration Tools Pack or Remote Server Administration Tools—including older prerelease versions, and releases of the tools for different languages or locales—from the computer before you install Remote
Server Administration Tools for Windows 10 Technical Preview. Only one copy at a time of Remote Server Administration Tools can be installed on a computer. If you have upgraded to Windows 10 Technical Preview from an older release of Windows, you will need
to install Remote Server Administration Tools for Windows 10 Technical Preview on the computer; no earlier releases of Remote Server Administration Tools are still installed on a computer that you have upgraded to Windows 10 Technical Preview.
Remote Server Administration Tools for Windows 10 Technical Preview includes support for remote management of computers that are running the Server Core installation option or the Minimal Server Graphical Interface configuration of Windows Server Technical
Preview. However, Remote Server Administration Tools for Windows 10 Technical Preview cannot be installed on any releases or installation options of the Windows Server operating system.
Earlier releases of Remote Server Administration Tools (such as those for Windows 8.1) are not available--nor do they run--on Windows 10 Technical Preview.
Server Manager is included with Remote Server Administration Tools for Windows 10 Technical Preview; GUI-based tools that are part of this release of Remote Server Administration Tools can be opened by using commands on the Tools menu of the Server Manager
console. To use Server Manager to access and manage remote servers that are running Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2, you must install several updates on the older operating systems. For more information
about requirements for using Server Manager to manage remote servers, see
Manage multiple, remote servers with Server Manager.
More information, see:
Remote Server Administration Tools for Windows 10 Technical Preview (January 2015)
Please check and see if your current build is Windows 10 build 9926, and the system language, RSAT should not be able to install on the other language versions of Windows 10 other than EN-US.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

KB2885698 the update is not applicable to your computer

kms server is on windows server 8 R2 6.1.7600 so i need to apply KB2885698 to be able to activate office 2013 on windows 8.1 computers. When applying Windows6.1-KB2885698-x64.msi got a message: the update is not applicable to your computer. Event
log: Windows update could not be installed because of error 2149842967. KB2885698 is NOT installed already. Installation of KB947821 was OK.

I've got a similar problem. I have my KMS server authenticating Office 2013 after a lot of mucking about but it wont authenticate Windows 8.1 enterprise. 2885698 suggests that the solution is to install an update but I get the message "the
update is not applicable to your computer". I get the same message on server 2008 R2, Server 2012 R2 and Windows 8.1 clients and that includes the Windows 2008 R2 server with the Office 2013 pack installed that already authenticates Office and Windows
7.

Windows6.1-KB958559-x64 the update is not applicable to your computer

I have yet to find a good answer on this one. Running a Q6600 with a 680i mobo VT enabled in the bios, 8GB ram. Win 7 RC fresh install. Loaded drivers rebooted and ran the XP mode install first, then ran the VPC file Windows6.1-KB958559-x64 only to get the message, "The update is not applicable to your computer." This should work on this machine. I've unpluged everything but the HD and video card to install this. Also would like to say it installed fine on my laptop which has the Intel T7500 processor. Any help or links to other forums you guys could post here on the topic would be greatly appreciated. I need to run some old data recovery software that just won't load on 7 and XP Mode allows you to access all drives on the system. Thanks!

I am looking at the MSU package and going to give it the trick people were using to upgrade from Windows 7 Beta to RC. Where you look into the files to change the version. There is an XML file in the MSU that checks the version of the system you are installing on. The current code looks like this:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <servicing>
        <package action="install">
            <assemblyIdentity buildType="release" language="neutral" name="Microsoft-Windows-VirtualPC-Package-TopLevel" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" version="7.1.7600.16393"/>
            <source location="%configsetroot%\Windows6.1-KB958559-x64.CAB" />
        </package>
     </servicing>
</unattend>
and may need to be changed to this
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <servicing>
        <package action="install">
            <assemblyIdentity buildType="release" language="neutral" name="Microsoft-Windows-VirtualPC-Package-TopLevel" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" version="7.1"/>
            <source location="%configsetroot%\Windows6.1-KB958559-x64.CAB" />
        </package>
     </servicing>
</unattend>
Either it has to be version 7.1 or 7100
Hope it works.

Bridge CC Adobe Bridge CC 6.0.1 Update Update is not applicable. Error Code: U44M2P28

(MAC) I downloaded Bridge CC and accidently deleted it unproperly. I just trashed it in the trash can and emptied it. I can't restore/ re-download it becuase it still says on Creative Cloud that Bridge is up to date, but when I looked online to properly delete it it Bridge CC is not in my Utilities/Adobe Installers? What do I do? I tried to redownload it online but it still won't work. It gave me this. PLEASE HELP!
Adobe Bridge CC 6.0.1 Update
Update is not applicable. Error Code: U44M2P28

Nikiminn the U44M2P28 indicates and installer error. I would recommend reviewing your installation log files for the specific errors for the Bridge 6.0.1 update. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Hot Fix error message for KB979344 "this update is not applicable to your computer", on Windows 7 64 bit with SP1

I've been having issues with an external Esata drive. Instead of being seen as a removeable drive, it is seen as a hard drive. This has caused us nothing but problems since our full disk encryption software automatically starts to encrypt
the drive rendering it useless.
The real problem I'm having is installing the Hot Fix, KB979344, for this issue. when tring to install, I get the message, "this update is not applicable to your computer" I've looked and this hot fix doesn't seem to be part of SP1, but
I could be missing it. Any thoughts?
Thanks,
Keith

Hi Keithk,
This hotfix is already contained in Windows 7 Service Pack 1.
Please add the registry key to check if the issue persists. (For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. )
Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Storage
Create a DWORD Value, name SATAHotplugPolicyOverride,
set 1 in Value Data.
Restart the computer to check if it works.
Regards,
Miya
TechNet Subscriber Support in forum. If you have any feedback on our support, please contact
[email protected]
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Windows Server 2008 R2: "The update is not applicable to your computer"

ALCON,
I'm trying to install a "Windows Update Standalone Installer" file (Windows6.1-KB3032323-x64.msu) along with other .msu files and I keep getting the same message: "The update is not applicable to your computer". The server is a
virtual machine and is also the vCenter server for the system, so I REALLY don't want to mess this installation up and break the system but the installation is needed and mandatory. How can I go about installing these .msu files.
*Note* The system is located in a classified environment so it doesn't have a connection to the outside (unclassified) world. But I'm able to have the .msu files placed on the system at any time.
Thanks!
V/r,
Stanley L. Johnson Jr.

Hello,
do you use SP1 for Windows Server 2008 R2?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

The Update is Not Applicable To Your Computer when installing patch on Windows Server 2008 R2 machine

When I try to install security patch KB2525694 and KB978542 on my Windows Server 2008 R2 machine, I get the message "The Update is Not Applicable To Your Computer". I am using the following files:
Windows6.1-KB978542-x64 (KB978542)
Windows6.1-KB2525694-x64 (KB2525694)
I believe these are the correct files but no luck installing it. Any help would be greatly appreciated!

When I try to install security patch KB2525694 on my Windows Server 2008 R2 machine, I get the message "The Update is Not Applicable To Your Computer". I am using the following files:
Windows6.1-KB2525694-x64 (KB2525694)
This update has been superseded many times.
If you already have installed one of the superseding updates below, KB2525694 will not be applicable.
For the list of superseding updates, check this list:
http://catalog.update.microsoft.com/v7/site/Search.aspx?q=2525694%20r2%20x64
(click on the result, then click on the "Package Details" tab to get the list below..
This update has been replaced by the following updates:
Security Update for Windows Server 2008 R2 x64 Edition (KB2555917)
Security Update for Windows Server 2008 R2 x64 Edition (KB2567053)
Security Update for Windows Server 2008 R2 x64 Edition (KB2639417)
Security Update for Windows Server 2008 R2 x64 Edition (KB2641653)
Security Update for Windows Server 2008 R2 x64 Edition (KB2660465)
Security Update for Windows Server 2008 R2 x64 Edition (KB2676562)
Security Update for Windows Server 2008 R2 x64 Edition (KB2709162)
Security Update for Windows Server 2008 R2 x64 Edition (KB2718523)
Security Update for Windows Server 2008 R2 x64 Edition (KB2731847)
Security Update for Windows Server 2008 R2 x64 Edition (KB2761226)
Security Update for Windows Server 2008 R2 x64 Edition (KB2778344)
Security Update for Windows Server 2008 R2 x64 Edition (KB2778930)
Security Update for Windows Server 2008 R2 x64 Edition (KB2779030)
Security Update for Windows Server 2008 R2 x64 Edition (KB2808735)
Security Update for Windows Server 2008 R2 x64 Edition (KB2829361)
Security Update for Windows Server 2008 R2 x64 Edition (KB2850851)
Security Update for Windows Server 2008 R2 x64 Edition (KB2876315)
Security Update for Windows Server 2008 R2 x64 Edition (KB2883150)
Security Update for Windows Server 2008 R2 x64 Edition (KB2893984)
Security Update for Windows Server 2008 R2 x64 Edition (KB2913602)
Security Update for Windows Server 2008 R2 x64 Edition (KB2930275)
Security Update for Windows Server 2008 R2 x64 Edition (KB2973201)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

DFW CC Release – 8/2013 Update is not applicable. Error Code: U44M1P28

Similar Messages

Maybe you are looking for