DHCP Leases vs. DHCP Statistics
While checking DHCP leases in the Computer Management MMC, I’ve noticed a discrepancy between the number of active leases displayed in Services and Applications
| Scope | Address Leases and the number of address reported as “in use” by right-clicking on Scope & selecting “Display Statistics.”
Generally, there seems to be a far lesser number of addresses displayed in the MMC “Address Leases” as compared to the number reported as “in use” by “Display Statistics.”
System is a SBS 2003 R2, fully patched & up-to-date.
I’m at a loss as to why this apparent discrepancy would exist.
Can anyone shed some light?
Thanks.
I have analyzed better the problem.
The "In use" value of "Display statistics" don't show the number of addresses really used by dhcp clients but show the maximum value of addresses that dhcp server has leased.
For example, if my dhcp server has scope 192.168.1.1-192.168.1.100 and addresses leased are
192.168.1.32, 192.168.1.36, 192.168.1.39
the "in use" value of statistics will be 39 even if addresses really used are only 3.
HTH
Edoardo Benussi - Microsoft® MVP
Management Infrastructure - Systems Administration
https://mvp.support.microsoft.com/Profile/Benussi
Windows Server Italian Forum Moderator
edo[at]mvps[dot]org
Similar Messages
-
Dhcp client lease, nat translation statistics
I am using my 3620 instead of a netgear cable router connected to cablevision.
1) How can I see when the router dhcp lease ends so I can see if it gets another address? I have seen on past posts that there were problems with this issue. I am using 12.3(13) ios.
2) How can I see how much memory has been used by nat translations? I have 64Meg of memory.
ThanksHi csross,
If I understand you correct this will resolve your issue.
1) show ip dhcp binding [ip-address]
It will show you the lease expiration like the output below
Router# show ip dhcp binding 172.16.1.11
IP add Hard add Lease expiration Type
172.16.1.11 00a0.9802.32de Feb 01 1998 12:00 AM Automatic
Here you go with the link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hiad_r/adr_s1h.htm#wp1132199
2) Each NAT mapping uses approximately 160 bytes of memory.
I am still not sure of the command.
HTH
Ankur -
MDT 2013 - A Connection to the deployment share could not be made - DHCP Lease was not obtained
First, let me give you some context:
Framework: MDT 2013 with MS SDK 7.1
Task Sequence: Standard Client TS with sysprep and capture.
Target workstation (build workstation): VM Guest on ESX 5.5 host, 8 vCPU, 8GB RAM, LSI Logic SAS Controller, E1000 NIC, SSD DAS
Behavior: The VM loads and installs the OS fine in PE, VM boots into OS successfully and resumes the TS, after the first system reboot, the error message occurs and it reads:
A connection to the deployment share (\\*********\DeploymentShare$) could not be made. DHCP Lease was not obtained for any Networking device! Possible Cause: Check physical connection. Retry:...... Cancel:.....
While observing this error, I didn't notice the NIC hadn't completely initialized and obtained an IP yet (network adapter icon in systray), additionally hitting retry after the NIC was initialized resumed the TS.
This behavior reoccurs with several subsequent reboots until a few more applications (Citrix Receiver, VMware Tools) with services are installed which seem to then slow the system boot-up time and then allows the TS to start after the NIC has initialized.
From several posts I've read on this forum, this particular behavior was alleviated by a "wait for IP lease" mechanism built into the TS engine which was introduced in MDT 2010 SP1, I wasn't able to find any other confirmation whether
this mechanism is still in effect with MDT 2013. Another point worth mentioning from several other posts I was able to find is that this behavior appears to manifested itself on target workstations with SSDs, which would somewhat explain the faster
TS load time vs waiting for an IP lease. I've also tried to replicate this behavior in a non-SSD and low-performance VM environment and I wasn't able to replicate it.
My question: Does anyone else have experienced this behavior with MDT 2013 and if so, how did you resolve it? Or is this a bug?I have this issue intermittently as well. For us, it coincided with the deployment of IP phones, which meant PoE switches all around. However, the problem persisted even after we turned off PoE to the ethernet ports from which we normally PXE
boot.
As this issue has been intermittent, I've backburnered it. When it does happen, I just wait for the lease to arrive then rerun the wizard.
Thanks for the feedback, that's true the TS can be resumed manually once the lease has occured but it defeats the purpose of an automated TS if I have to keep an eye on it and intervene if I need to.
The network guys here recommended putting wireshark or network monitor on it and figuring out just what the heck is going on. Basically, what Keith Garner said. They also disabled PortFast awhile back to see if that made any difference, and it did
not. -
SBS 2011 no longer issues DHCP leases: DHCP, DNS, and AD Errors
Hi all. On early 8/13/2012 and into the morning, our UPS failed several times. The battery seems to be fine but the unit was shutting off power to the unit which means the (Windows SBS 2011 Standard) server shut off unexpectedly several times.I replaced
the UPS.
Now I'm trying to figure out what in the world this did to the server. It seems DHCP, DNS, and AD all have issues, as seen in the logs below. The client PC's are going offline one-by-one because the leases are expiring and it can't connect to the server
to renew. When trying to start the DHCP service, I get a 20013 error saying it cannot be started.
So I attempted to follow a kb article and repair the database but that didn't work because it seems the Jetpack utility is not in SBS 2011? And even at that, I'm thinking it may not even be a corrupted DHCP database due to the other errors in the event log.
This is a small office and I only know enough to be dangerous but usually I can just follow a kb to fix any issues. But there are so many errors, this one has me stumped.. Could any Server whizzes identify the big picture here?
Level Date and Time Source Event ID Task Category
Critical 8/13/2012 1:33:12 PM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 11:30:37 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 8:23:24 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 8:05:08 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 7:38:04 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 7:29:29 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 12:55:11 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 12:15:49 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 12:09:49 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:48:02 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/14/2012 2:23:37 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/14/2012 1:14:33 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/13/2012 8:06:12 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/13/2012 7:38:59 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/13/2012 12:16:52 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 5/31/2012 12:00:19 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 5/31/2012 11:14:20 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 4/18/2012 4:32:07 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 9/2/2011 2:14:09 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/30/2011 11:37:18 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/23/2011 1:52:28 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Level Date and Time Source Event ID Task Category
Error 8/15/2012 8:23:17 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 2:45:22 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:46 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:38 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:17 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:48:02 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:27:04 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:22:27 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:57 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:35 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:52:07 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:48:46 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:28:39 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 4:47:56 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 3:41:50 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:53:42 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:26 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:08 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:23:24 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:16:13 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 1:14:33 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 1:33:58 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:48:37 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:45:31 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:41:43 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:39:43 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:31:22 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:24:08 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:06:12 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:38:47 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:30:14 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:55:59 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:16:52 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:52:46 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:52:38 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:52:17 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:48:02 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:27:04 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:22:27 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 8:03:57 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 8:03:35 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 7:52:07 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 7:48:47 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 7:28:40 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 4:47:56 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 3:41:50 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:53:42 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:42:26 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:42:08 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:23:25 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:16:13 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 1:14:33 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 1:33:59 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:48:37 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:45:33 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:41:43 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:39:43 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:31:23 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 8:24:09 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 8:06:13 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 7:38:48 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 12:55:59 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 12:16:52 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Level Date and Time Source Event ID Task Category
Error 8/15/2012 8:23:17 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 2:45:22 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:46 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:38 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:17 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:48:02 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:27:04 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:22:27 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:57 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:35 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:52:07 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:48:47 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:28:40 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 4:47:56 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 3:41:50 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:53:42 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:26 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:08 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:23:25 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:16:13 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 1:14:33 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 1:33:59 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:48:37 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:45:33 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:41:43 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:39:43 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:31:23 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:24:09 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:06:13 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:38:48 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:30:15 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:55:59 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:16:52 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:48:28 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/15/2012 12:22:55 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/14/2012 2:23:56 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/14/2012 1:15:00 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/13/2012 1:34:27 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/13/2012 11:31:55 AM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/13/2012 8:24:36 AM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:48:28 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/15/2012 12:22:55 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/14/2012 2:23:56 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/14/2012 1:15:00 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/13/2012 1:34:27 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/13/2012 11:31:55 AM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/13/2012 8:24:36 AM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Level Date and Time Source Event ID Task Category
Error 8/15/2012 8:23:17 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 2:45:22 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:52:46 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:52:38 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:52:17 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:48:22 PM Service Control Manager 7024 None The SQL Server (SBSMONITORING) service terminated with service-specific error %%17058.
Error 8/15/2012 12:48:02 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:27:04 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:25:19 PM Service Control Manager 7024 None The Windows Search service terminated with service-specific error %%-1073473535.
Error 8/15/2012 12:22:48 PM Service Control Manager 7024 None The SQL Server (SBSMONITORING) service terminated with service-specific error %%17058.
Error 8/15/2012 12:22:27 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 8:03:57 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 8:03:35 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 7:52:07 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 7:48:47 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 7:28:40 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 4:47:56 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 3:41:50 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:53:42 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:42:26 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:42:08 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:23:25 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:16:13 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 1:14:33 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 1:33:59 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:48:37 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:45:33 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:41:43 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:39:43 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:31:23 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 8:24:09 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 8:06:13 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 7:38:48 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 12:55:59 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 12:16:52 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013. -
After one or two websites the search "freezes". To rectify this I need to go into "Network" and press "Renew DHCP Lease" on my imac 10.6.8TS1317 - Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connectionAny help?
Check your computers time and date are correct, and updating to your location via Apple's servers.
WiFi, Internet problems, possible solutions -
[SOLVED] Hostname not showing in DHCP lease list
This is a brand new installation using the new systemd base.
Installed openbox as window manager and Network Manager.
What did I miss that the hostname of this computer (opus) is not showing up in the DHCP Leases list?
When I connect to the network using Network Manger(DHCP), hostname is not sent to the DHCP server (DNSmasq). It shows up as a "*":
DHCP leases
Hostname IP-address MAC-address Lease expires
* 192.168.10.100 XX:XX:XX:XX:XX:XX Nov 28th, 19:34
* 192.168.10.59 XX:XX:XX:XX:XX:XX Nov 28th, 19:23
alarmpi 192.168.10.69 XX:XX:XX:XX:XX:XX Nov 28th, 16:56
RM696 192.168.10.97 XX:XX:XX:XX:XX:XX Nov 28th, 18:23
(I blanked out the MAC-addresses.)
The first entry is connecting through wireless. The second is wired.
At the command line:
hostname
opus
hostname -f
localhost.localdomain
/etc/hosts:
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost opus
::1 localhost.localdomain localhost opus
# End of file
What file do I need to change and how?
Updated:
1) I created a /etc/dhclient.conf file and added:
send host-name "opus";
request subnet-mask, broadcast-address, time-offset, routers,
domain-search, domain-name, domain-name-servers, host-name;
and rebooted.
This had no effect.
2) Just for kicks, I uninstalled Network Manager and installed Wicd.
This DID send the hostname and it displayed on the DHCP Leases List. But it also had the effect of turning off the WiFi radio.
I did try to turn it back on: Went to the BIOS, made sure it was on (it was). Read some posts about power savings and what to do (tried them, didn't work).
So I uninstalled Wicd, re-installed Network Manager and I am back to where I was.
Last edited by dastagg (2012-11-29 11:15:11)Sorry, forgot to add this:
https://bbs.archlinux.org/viewtopic.php?id=152376
Follow the instructions on the bottom. -
RV180W firmware 1.0.5.4 DHCP lease problem
Yesterday I upgraded my RV180W to firmware 1.0.5.4. Today the only machine that we have with XP can't get a DHCP lease (we have some 20 machines that can that all have W7 o W8.1). Also none of the iPhones nor Androids that connect via wifi get leases either and thus have fallen back to 3G.
Hello,
First of all I want to say that I'm sorry you are experiencing an issue with the device after the firmware upgrade.
Now, we have tested this device with the new firmware on our lab and we are not experiencing the same issue, which leads me to believe this may be an issue with your particular configuration or network topology.
We would love to have the opportunity to troubleshoot this issue on the Small Business Support Center. If you are still under support with the device, give us a call and we will be happy to assist you.
If you are not able to or are out of support, then please provide as much information as possible in regards to your current configuration as well as network topology, maybe a detailed network diagram could be helpful to so that we can have a better idea of that the issue could be.
I hope this was helpful. -
My internet keeps going down and when I try to renew the DHCP lease it stops working altogether
Every couple of weeks my internet would go down, I would be surfing the web and suddenly my connection would fail. I would try renewing my DHCP lease and every time I did I would get an IPv4 address of 192.168.0.100. Originally, restarting the router would fix the problem but the past couple of times they needed a technician from the provider to fix it. Even using the Ethernet cable doesn't work either.
is there a reason why this keeps happening and how do I stop it from happening again? Is there anything I can try to fix it on my end?
my computer is a five year old MacBook, running OS X 10.9.4Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
Using current version IPad mini.
Ios7 is HUGH PIECE OF CRAP!!!! -
How do I revoke a DHCP lease in the 10.8.4 server app?
Hello Everyone,
I have some devices (security cameras) that have successfully requested a DHCP lease. Since then I went ahead and manually created a static reservation for them with a MAC hardware address in the DHCP. For whatever reason they are not switching over to the reserved address. The leases were originally for 1 day. It has been 5 days now. After the first day I switched my lease time to 1 hour. I have done everything short of leaving the devices off for 24 hours.
In Lion server, I could revoke the lease via the gui. No such luck now. My call to Applecare resulted in a "there is no way in 10.8.4 to do this". They said it would switch to the new reserved address after the initial lease period timed out, so I'm hoping the representative was wrong twice. They mentioned a complete lease wipe, but couldn't say if this would cause me to lose my list of reserved static addresses, which isn't an option.
It seems crazy that such a basic feature wouldn't make it into this release of the DHCP service. Any help would be greatly appreciated!Are there any DHCP queries from the cameras? Check the DHCP server log via Console.app or Server.app (or Terminal.app) for details. (I don't know the 10.8 path to the DHCP logs offhand.)
According to a FAQ over at the Vivotek site, the following is the setup sequence for various recent cameras; the boxes start up in the "I don't have an IP address" self-allocated address block oddly enough, and apparently don't ask for a DHCP address? (You may well be aware of all of this, but this is the block that DHCP clients use when they first communicate with DHCP servers.)
If you are using our new product such as IP7138 / IP7139 / FD7131 / VS7100… etc, no matter your network environment is what, you can always find the camera by Installation Wizard II with the IP address 169.254.x.y.
And then, please double click the camera found by Installation Wizard II or directly type the IP address to your Internet Explorer URL box to access your camera (you do not need to change your PC's IP address). After access your camera, please go to "Network" page to configure proper network settings.
See if the devices are available via mDNS, as well; download the Bonjour Browser and have a look around your LAN. (If you're very lucky, the cameras might be visible and chatting on mDNS.)
Might also try resetting one of the cameras back to factory defaults, and seeing if you can get them to re-ask the DHCP server.
(I've had issues with some HP printers and DHCP clients and IP address assignment, but that's fodder for another discussion. And I also wouldn't rule out a rogue DHCP server, either. I've seen all sorts of unexpected stuff connected to networks over the years...) -
Multiple Lease Duration for one DHCP Scope?
Hi All,
I have an urgent question. I wanted to know if it is possible to have many lease durations for different computer groups getting their addresses from one DHCP scope. I saw somewhere that it is possible to use User Classs or Vendor Classes for setting a lease
duration for a group of computers sharing the same class Id ?
If it is true, How can to configure ?
Also i would like to know about the lease duration period what is the maximum days can we have ( 8 days After )?
Thanks
AtulPlease refer to the following-
http://social.technet.microsoft.com/Forums/windowsserver/en-US/26de79f9-6ad7-4088-9077-006b9dd8c1fb/multiple-lease-durations-for-one-dhcp-scope?forum=winserveripamdhcpdns
You can configure any value as lease duration; however if you want a very big/infinite value; it makes sense to convert the lease(s) to a reservation. -
Wired "dhcp ip lease attempt failed"/no internet
Hi, I've been using netcfg on arch for a couple months now and never had trouble with it until today, I just changed internet carrier and the guy came install the modem here and I tried to plug my laptop to it and I can't get internet. Before whenever I plugged an Ethernet cable it would connect automatically because of ifplugd. I use the profile "ethernet-dhcp" from the examples that I copied to /etc/network.d. When I plug the wire, internet doesn't work so I tried : netcfg -a : Done, netcfg ethernet-dhcp and get "dhcp ip lease attempt failed".
I read the forums and tried some solution proposed to people with same error message but with wireless and sometimes I can connect to the profile, but I still don't have internet.
I've plugged the cable in my eepc running win7 and it works (I'm writing this from the eepc). Also the link light flashes on the modem And on my T61 when I plug the cable in the ethernet slot. I tried a static profile with the same ip as my eepc but no joy.
any suggestions ?
thank youHi, I've been using netcfg on arch for a couple months now and never had trouble with it until today, I just changed internet carrier and the guy came install the modem here and I tried to plug my laptop to it and I can't get internet. Before whenever I plugged an Ethernet cable it would connect automatically because of ifplugd. I use the profile "ethernet-dhcp" from the examples that I copied to /etc/network.d. When I plug the wire, internet doesn't work so I tried : netcfg -a : Done, netcfg ethernet-dhcp and get "dhcp ip lease attempt failed".
I read the forums and tried some solution proposed to people with same error message but with wireless and sometimes I can connect to the profile, but I still don't have internet.
I've plugged the cable in my eepc running win7 and it works (I'm writing this from the eepc). Also the link light flashes on the modem And on my T61 when I plug the cable in the ethernet slot. I tried a static profile with the same ip as my eepc but no joy.
any suggestions ?
thank you -
WLC2504 clients not receiving DHCP leases
I'm stock with a 2504 using version 7.0.220.0 that won't lease out DHCP adresses
Wifi clients are unable to get a DHCP lease from an external DHCP server.
The WLC are handling 3 WLAN, 2 using internal DHCP server, 1 (that wont work) using external DHCP. The external DHCP server, is a router/firewall (out of my reach) that suffered from a power out, a short while ago, ever since the DHCP is not working on that VLAN, if client are getting static ip adresses, everything works fine. If i'm using the same network link, and plug it into a computer, I get a DHCP address.
I've enable DHCP proxy
Debbuging DHCP, using: Debug DHCP packets enable
Gives me this:
*DHCP Socket Task: Nov 08 14:21:11.397: c8:0a:a9:cc:6d:f6 DHCP received op BOOTREQUEST (1) (len 308,vlan 20, port 1, encap 0xec00)
*DHCP Socket Task: Nov 08 14:21:11.397: c8:0a:a9:cc:6d:f6 DHCP option len (including the magic cookie) 72
*DHCP Socket Task: Nov 08 14:21:11.397: c8:0a:a9:cc:6d:f6 DHCP option: message type = DHCP INFORM
*DHCP Socket Task: Nov 08 14:21:11.397: c8:0a:a9:cc:6d:f6 DHCP option: 61 (len 7) - skipping
*DHCP Socket Task: Nov 08 14:21:11.397: c8:0a:a9:cc:6d:f6 DHCP option: 12 (len 1) - skipping
*DHCP Socket Task: Nov 08 14:21:11.397: c8:0a:a9:cc:6d:f6 DHCP option: vendor class id = MSFT 5.0 (len 8)
*DHCP Socket Task: Nov 08 14:21:11.397: c8:0a:a9:cc:6d:f6 DHCP option: 55 (len 13) - skipping
*DHCP Socket Task: Nov 08 14:21:11.397: c8:0a:a9:cc:6d:f6 DHCP options end, len 72, actual 64
*DHCP Socket Task: Nov 08 14:21:11.397: c8:0a:a9:cc:6d:f6 DHCP dropping packet (no mscb) found - (giaddr 0.0.0.0, pktInfo->srcPort 68, op: 'BOOTREQUEST')
ThanksHi Steen,
When a client is in DHCP REQ state on the controller, the controller drops DHCP inform packets. The client will not go into a RUN state on the controller (this is required for the client to pass traffic) until it receives a DHCP discover packet from the client. DHCP inform packets are forwarded by the controller when DHCP proxy is disabled.
Please check this, if still u r facing issue then provide more info.
Can you please paste a client debug of the client having DHCP issues.
Go to cli of the wlc and run the client debug . Diconnect the client then reconnect and gather the output and post.
Regards -
DHCP wont lease IP Address's on 877 WLAN but does on wired connections
We have set up an 877 with wireless in one of our remote offices and come across a problem not seen before. (Set many 877's up before).
The dhcp configured on the router wont lease to wireless devices only to wired devices.
Even giving the wireless devices a static IP the traffic doesnt seem to pass although the wifi connection says connected on the laptops.
The config is as follows (pretty basic, internet access and 1 vpn tunnel).....
Please can anyone advise if something is wrong???
sh run
Building configuration...
Current configuration : 3869 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable password XXXXXXX
no aaa new-model
dot11 syslog
dot11 ssid PPWireless
vlan 1
authentication open
authentication key-management wpa
wpa-psk ascii 0 XXXXXXX
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.40.1 192.168.40.24
ip dhcp excluded-address 192.168.40.101 192.168.40.254
ip dhcp pool DHCP
network 192.168.40.0 255.255.255.0
domain-name XXXXXXXX.local
dns-server 172.16.1.3 194.72.9.38
default-router 192.168.40.254
lease 3
ip domain name XXXXXXXXX.local
ip name-server 172.16.1.3
ip name-server 194.72.9.38
ip name-server 194.72.9.34
username admin privilege 15 password 0 XXXXXXXX
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key finance address 213.123.142.54
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto map SDM_CMAP_1 1 ipsec-isakmp
description Tunnel to213.123.142.54
set peer 213.123.142.54
set transform-set ESP-3DES-SHA
match address 101
archive
log config
hidekeys
bridge irb
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
interface ATM0.1 point-to-point
description $ES_WAN$
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Dot11Radio0
no ip address
encryption vlan 1 mode ciphers tkip
broadcast-key vlan 1 change 30
ssid PPWireless
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.1
encapsulation dot1Q 1 native
ip nat inside
ip virtual-reassembly
no cdp enable
interface Vlan1
no ip address
bridge-group 1
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname XXXXXXXXXXXXXXXXXX
ppp chap password 0 XXXXXXXXXXXXXX
crypto map SDM_CMAP_1
interface BVI1
description $ES_LAN$
ip address 192.168.40.254 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
no ip http secure-server
ip nat inside source route-map SDM_RMAP_1 interface Dialer0 overload
access-list 100 remark CCP_ACL Category=2
access-list 100 remark SDM_ACL Category=16
access-list 100 remark IPSec Rule
access-list 100 deny ip 192.168.40.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 100 permit ip 192.168.40.0 0.0.0.255 any
access-list 101 remark SDM_ACL Category=4
access-list 101 remark IPSec Rule
access-list 101 permit ip 192.168.40.0 0.0.0.255 172.16.1.0 0.0.0.255
dialer-list 1 protocol ip permit
route-map SDM_RMAP_1 permit 1
match ip address 100
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
no modem enable
line aux 0
line vty 0 4
password finance
login
scheduler max-task-time 5000
end
Router#Hi, You have some mistakes on your configuration.
1- bridge-group 1 has to be under the dot11 radio 0.1 interface and not under the dot11radio 0 interface
2- ip nat inside has to be only under bvi 1 and not anywhere else.
I will paste for you your modified router config.
give it a shot.
dot11 ssid PPWireless
vlan 1
authentication open
authentication key-management wpa
wpa-psk ascii 0 XXXXXXX
ip dhcp excluded-address 192.168.40.1 192.168.40.24
ip dhcp excluded-address 192.168.40.101 192.168.40.254
ip dhcp pool DHCP
network 192.168.40.0 255.255.255.0
domain-name XXXXXXXX.local
dns-server 172.16.1.3 194.72.9.38
default-router 192.168.40.254
lease 3
ip domain name XXXXXXXXX.local
ip name-server 172.16.1.3
ip name-server 194.72.9.38
ip name-server 194.72.9.34
username admin privilege 15 password 0 XXXXXXXX
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key finance address 213.123.142.54
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto map SDM_CMAP_1 1 ipsec-isakmp
description Tunnel to213.123.142.54
set peer 213.123.142.54
set transform-set ESP-3DES-SHA
match address 101
archive
log config
hidekeys
bridge irb
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
interface ATM0.1 point-to-point
description $ES_WAN$
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Dot11Radio0
no ip address
encryption vlan 1 mode ciphers tkip
broadcast-key vlan 1 change 30
ssid PPWireless
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname XXXXXXXXXXXXXXXXXX
ppp chap password 0 XXXXXXXXXXXXXX
crypto map SDM_CMAP_1
interface BVI1
description $ES_LAN$
ip address 192.168.40.254 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
no ip http secure-server
ip nat inside source route-map SDM_RMAP_1 interface Dialer0 overload
access-list 100 remark CCP_ACL Category=2
access-list 100 remark SDM_ACL Category=16
access-list 100 remark IPSec Rule
access-list 100 deny ip 192.168.40.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 100 permit ip 192.168.40.0 0.0.0.255 any
access-list 101 remark SDM_ACL Category=4
access-list 101 remark IPSec Rule
access-list 101 permit ip 192.168.40.0 0.0.0.255 172.16.1.0 0.0.0.255
dialer-list 1 protocol ip permit
route-map SDM_RMAP_1 permit 1
match ip address 100
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
no modem enable
line aux 0
line vty 0 4
password finance
login -
N82 does not correctly process DHCP leases
I have no problem attaching my new N82 to my, and friends, home wireless networks. However, it fails to connect to the Univeristy Campus network giving the error: "Web: No gateway reply!"
This is because the phone doesn't correctly process DHCP leases with the 'network of one'' (2545.255.255.255) subnet mask.
Campus network details:
HP WAP 530 enterprise access point. The DHCP server is an ISC dhcp server giving out ip address in the standard private class C address range (192.168.1.0) with a subnet mask of (255.255.255.255), and a default route of 192.168.1.1.
This works on Windows 2000/XP/Vista and MAC OSX, but many embedded devices will not add the default route as they see it as outside their subnet. Many institutions use 255.255.255.255 to mitigate inter host communication.
This means I cannot use my N82 at work and I'm not happy. Beware, don't assume you can use your Nokia device at work.If task manager says it's still running, then obviously it hasn't completed, contrary to what you said. Maybe this .exe process isn't written correctly. For example, maybe it is dependent on the current directory it is launched from, and so double-clicking it causes it to be launched from the directory it lives in, but when run from this java app, the working directory is somewhere else.
-
Continually have to renew DHCP lease
Occasionally my MBP will loose wireless connection. It often happens when my phone accesses the wireless Linksys router.
Every time it happens, I open network preferences, go to Advanced and "Renew DHCP Lease" and it fixes it.
Almost looks like I could use a script or something to make it renew DHCP lease when wireless disconnects.
Any ideas?BoyHowdyDoo wrote:
Try another router. They are cheap.
I guess they're cheap for most people who are happy overspending for Apple products.
Usually not a problem with your Mac.
None of my other non-Apple devices have any problem connecting.
I really appreciate you being one of the few trying to help. My negative comments come from my frustration at Apple.
Maybe you are looking for
-
Notification Assignment Type Issue - SAP Work Manager 6.0
Hello Experts, We are not able to download notifications on the device for header level work center that is assignment type = 5. We have done the below configuration. - added the user parameter for work center in user profile. - changed assignment ty
-
Why does some images saved on memory card show up as a little icon with lightning bolt through it
I been saving images on memory card.. well as of lately some images have a icon with a lightening bolt on it..and images are lost
-
Got a new Zen Micro and I love it so far. Just a few questions about acessories. . Where do I get an adapter into a car cassette player? Can I use the adapter from my old portable CD player? 2. Where can I get speakers for it's I think it would make
-
<p>Hi</p><p> can anyoneplease tell me how to get metadata in parent child format <b><spanstyle=" text-decoration: underline;">from</span></b> essbase. Ineed the data from essbase cubes which are already build. we areusing version 6.5.4.2</p><p
-
Cannot update Adobe AIR 1.1.0.5790 to 1.5.0.7220 on Windows XP Pro
I've tried both to remove previous version of Adobe AIR runtime from "Program Files > Remove programs" and from command line console by running "AdobeAirInstaller.exe -uninstall" No luck! When I run "AdobeAirInstaller.exe -uninstall" from command lin