DHCP mapped MAC to IP issue??

Hello,
I am trying to map MAC to IP in DHCP service but it does not work.
This is the device and commands I am using:
Catalyst 3560 Series PoE-8 (L3 switch)
System image file is "flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE5.bin"
ip dhcp pool RGuzman
   host 172.16.3.24 255.255.255.0
   client-identifier 01c8.0aa9.9322.56
   default-router 172.16.3.10
   *** more commands ommited but configured ***
- I also tried with the hardware-address command and didn't work either.
Debug output:
***Attached***
Note: I first tried it in an operative L3 switch WS-C3560-24PS, System image file is "flash:/c3560-advipservicesk9-mz.122-25.SEE4.bin". Then in a Cisco 871 with c870-advipservicesk9-mz.124-9.T7.bin. It has not worked in any scenario.

Hi
Do you have WPA/WPA2 security setup on the router? i tried with wpa/wpa2 i changed to wep and i try even without password
Do you have the routr set to hand out enough IP addresses?yes with both routers
Do you have the router set to broadcast its SSID?yes
Do you have any MAC (that is Media Access Control. Not Apple Mac) filtering in place?Please clarify this?
On to the Macbook
Do you have WiFi turned on? (just checking)yes
Do you see your routers SSID in the available WiFi connections list?yes
Can you connect to any other WiFi network in the list of available connections?no
Do you have the OS X Firewall turned on?i tried with firewall on and with firewall off

Similar Messages

I have an 6 year old mac mini having issues. I can turn it on, get the apple logo and blue screen and nothing else.....help!!

i have an 6 year old mac mini with issues that started two weeks ago. I can turn it on , get blue screen and turning circle and nothing else......help !

Hi,
Have you tried some of these? http://support.apple.com/kb/ht1533
The first things I would try would be to press shift during start up, this will boot into safe mode.
I think you'll need to purchase a copy of Snow Leopard to re-install the OS.
There's another couple of suggestions here; http://support.apple.com/kb/TS1417 where you can boot into single user mode and look at repairing disk permissions if that's the problem.
I would hope that if you could boot into safe mode or single user mode, then that may automatically rectify your current issue. If not, then I'm pretty certain that a fresh install will be the ultimate answer.

BT Cloud App for Mac - Upload freeze issues?

Anyone experiencing freeze issues during upload sessions?
I just downloaded the app yesterday and kicked off an upload of 20K (ish) files. It progressed nicely through the day, but clearly froze at some point during the night. Following a reboot I've seen a further freeze in the last couple of hours and resorted to closing/re--opening the app.

Hi there,
Thanks for replying. I have had issues with this continually throughout the upload. I've managed to back-up just over 8Gb since Saturday afternoon, but not without a bit of coaxing (closing and re-starting the app every time it appears to freeze.). In fact my upload has just finished within the last few minutes. I've left it on after I've gone to bed on two evenings, but it's clear by morning that the app froze at a much earlier point. I'm not on Infinity yet, but I do get a rock solid 1Mb upload so whilst the upload rate isn't wild, it would be adequate if not for the reliability issue.
Basically the client seems to freeze after a certain time, but there doesn't seem to be any particular pattern in terms of when it happens.
I'm really excited about using BT Cloud, having had problems with several other similar services. I love the fact that it doesn't mess with your local file copy, and that it doesn't expect the user to work 'in the cloud', and that it iteratively looks for changes and just deals with them.
The iPad app seems pretty good, other than the wildly random way the sub folders in my Documents folder display. I have a lot of sub folders. I know there's a search bar, but still, a simple alphabet order approach would be better.
Happy to provide any further input wrt the Mac app stability issue.
OS X (10.8.5)
Safari 6.0.5

Post Moved Mac Port Forwarding Issues

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Mac-Port-Forwarding-issues/td-p/550779
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Does this help...?
http://community.bt.com/t5/Other-BB-Queries/Port-forwarding-and-Loopback-DO-work-YMMV/m-p/538328

Mac/forfox/ebay issue

I am having a problem with ebay.de on firefox running on a mac.
It started when you developed and launched the 4.0. It doesn't show the ended button. only when I reload it appears for a split second. If I open it in a external window its working and even the button is shown. But not in the main window.
It seems to be a Mac/Firefox/Ebay issue
Best regards
Brian

This is what Im talking about

Mac Alert systems issue

Hello I just got an Mac Alert systems issue security warning on my screen. I tried getting apple to help me out but they directed with firefox when the problem is Safari. I unistalled Safari and then redownloaded but it still shows up. What do I do

Hello
I tried to relaunch while holding down shift key and it didnt do anything to solve the issue.

Mac Pro Display Issue

Mac Pro Display Issue - Unexpectedly Sleeps and Freezes
Just since a couple of days my Mac Pro desktop has been having display issues. Unexpectedly the screens go into sleep mode, it turns black and freezes, the computer doesnot respond to the keyboard or mouse.
At first I thought this was related to Chrome, and switched to Firefox, but the computer is still having the same issue. I have to shut down and restart each time it gets stuck.
I even went into preferences and changed the energy saver settings to "Never" allow display or harddrive to sleep. But this problem is stil happening.
Does anyone have the same problems? Or a solution?

I cleaned out my mac with compressed air, it was dusty, but the display flickering happened again.
So I followed your advice and installed:
Temperature Monitor
http://www.bresink.de/osx/TemperatureMonitor.html
Which showed that my memory module 1B and 2B were 70 - 75'C(160 -167'F). There was no reading for the graphic card so I couldn't tell if that was over heating.
Then I installed:
smc fan controller
http://www.macupdate.com/app/mac/23049/smcfancontrol
and increased the memory_cpu fan speed which lowered the temperature of the ram to 60'C (143'F).
I even changed this ram's placement and put it in different slots.This ram was the same temperature in the new placements.
Also this is the kingston 2gb ram without heatsinks. Ive used it for 1.5 yrs, and this is the first time its giving me these problems.
Do you know how I can check if the graphic card is over heating? or is the problem just with the ram?
Thank you for all your help!

Cannot log into facetime for mac - says network issues - anybody help?

cannot log into facetime for mac - says network issues - anybody help?

cannot log into facetime for mac - says network issues - anybody help?

Mac mini having issues with system preferences retaining settings

Mac mini having issues with system preferences retaining settings; this was present with Mavericks and now Yosemite after installation. Did try removing com.apple.systemprefs.plist file (library/preferences folder) to trash, but couldn't find it in trash in order to empty it. Upon reboot the file is still missing. Please don't suggest reloading Yosemite, have very slow internet connection, Yosemite took 7-8 hours to D/L.
Any troubleshooting suggestions out there? thanks

Well, I'd open Font Book, it's included with OSX, & see what it says for Validate & Duplicates.
I would also like to add I am new to Apple computers and I'm doing my best to stay up to par with whats what and understanding!
No problem, we were all new to everything once, do let us know if you need more help or clatification.

Mac mini having issues with video and sound

all of the sudden my mac is having issues playing video or sound. videos or songs will start but only play for a second or two before freezing. This happens with videos on my mac, Youtube, spotify... pretty much across the board!

Well, I'd open Font Book, it's included with OSX, & see what it says for Validate & Duplicates.
I would also like to add I am new to Apple computers and I'm doing my best to stay up to par with whats what and understanding!
No problem, we were all new to everything once, do let us know if you need more help or clatification.

Mac Mini internal issue

I set up a new mini server and everything is working except I can't access the server/iMail internally. It works fine from outside the network. I'm assuming this is a router issue but can't figure it out. Externally when I type in www.example.com I can get to the server, internally it will not. If I type in the IP address 10.0.XX.XX when I'm on the network then I can get to the server. I have an Actiontec PK5000 DSL modem with time port behind that. The Actintec does not support loopback.....is that my issue and is there any way to correct it?

Thank you for the feedback, but I'm not seeing anything about DNS on the Time Port.
A router doesn't implement DNS services. An IP router routes IP packets. Some routers also include other features, such as DNS forwarding, DHCP, firewall services, NAT, and other features. This omnibus implementation can vary by device and by how a site implements the device, and that can lead to confusion and complexity, as DNS forwarding simply passes packets to a remote server, and there are DNS server settings for DHCP servers, for those gateway boxes that (also) provide DHCP. But few (no?) routers incorporate DNS servers.
The other confusing bit here: ISP DNS servers don't server DNS translations for hosts behind a NAT.
When there are no local DNS services, Mac OS X Server can set up a single-host DNS service, but (due to common confusion with the settings and the resulting configuration errors) that might not happen in all cases.
And if the local DNS isn't operational and correct, your server will encounter DNS errors.
To check your local DNS services, launch Terminal.app and issue the command +sudo changeip -checkhostname+ and see if you get some information on the host, and either an indication that DNS is OK, or that there are DNS errors. (The sudo will require you to enter an administrative password.)
Time Capsule and Airport devices are good residential routers, and can be deployed as good access points (APs) in larger (and small business) configurations. (It's not typical to run multiple WiFi routers. You can't move your connections among the devices, for instance. APs allow that.)
Someone once told me that the Time Port are router wanna bes.
They're entirely functional routers, and as APs. They're not particularly good choices as server gateways as they lack various server-oriented features; [here is what I look for with server gateways|http://labs.hoffmanlabs.com/node/1724].
It probably works fine as a wireless router for a house but not for a server. I guess I need to look at upgrading it, eh?
You can [set up DNS on your Mac Mini Server|http://labs.hoffmanlabs.com/node/1436] and entirely bypass the need to reflect the traffic at your gateway firewall, and resolve the local DNS server issues that your server (likely already) has.

Deafult host mapping (mac/pc gaming)

Hi everyone, just wondering if anyone could help with a port problem I'm having directly related to hosting/connecting online gaming via my Airport Extreme network (not LAN). As searches have only helped answer certain parts of my problem. For the record, some friends and I are trying to start an online multiplayer game (StarWars Battlefront) but most of them are on PC and the multiplayer option only let's mac/pc connect via direct IP connection. They also have networks/routers that their machines are connected to but I know how much of a pain it is to configure that sort of thing in Windows. *I don't look so smug now though do I!?*
Basically I've tried setting the base station to 'Enable Default Host at..' and left the default address of 10.0.1.253 then gone into System Prefs and tried to assign the new private IP (default host) to this machine by going to Network - TCP/IP and changed the configure drop down menu to 'Use DHCP with manual Address'.
Once I've changed the manual IP of the machine as 10.0.1.253 to match the default host address in the Airport settings and applied, I no longer get access to the internet. I assumed it was to do with the DNS server address not being there so I copied and pasted that from the 'Internet' settings in the Airport Admin configure window. But still no joy!
I've tried just port mapping without specific port assignment number doesn't seem to work (and Aspyr don't seem to like answering email! swines) coz I know Quake and things like that use specific port numbers, but by all accounts using the default host option seems to be the best logical solution
Can anyone help?

bongo_boy, Welcome to the discussion area!
Don't use "DHCP with manual Address". Follow the directions in Steve Newstrum's user tip: How do I use Port Mapping (Part I).

Messed Up Keyboard Mapping, not an Software Issue

Greetings Folks!
I've been having a strange problem with my keyboard; the keyboard mapping is all messed up!
I was writing a piece of work this afternoon, and had to go out for couple of hours. I put my Macbook Pro into sleep and gone out. When I returned, I seemed to having problem logging in again. Tried to log in to guest account, all worked normal. I did some trials, apparently my keyboard mapping got screwed. All keys are working but all address strange letters, like Kyrilic or Scandinavian letters. Function keys are OK, I can adjust the brightness, etc, touchpad is fine, but no text.
I'm practically locked out of my account. Only one thing is the extreme slowness of stacks. It takes forever icons to pop out, everything else seems fine. All software work, everything is OK, and local keyboard mapping settings seems fine.
Any suggestions?

Yeah, keyboard is messed up, it was an hardware issue.
I've stopped by in my Apple Store and told them about the problem. They were very kind, and I handed my Macbook Pro over. The have examined it, and delivered to me shortly. According to the service document, one of the function keys struck somehow, altering the whole mapping of keyboard. They have changed it, and my Mac runs like new.
Thanks for tips mate.

Read posts but still can't resolve my mac/pc networking issues :(

Hi everyone,
I'll get right to it. I have a G4 10.4.7 imac which I've had hooked up to Westell Wirespeed dsl modem (allows up to 253 users when networked, Verizon provided modem and dsl service) via ethernet. Yesterday, I bought new a Toshiba Satellite A105-S4074 Notebook. 802.11 a/b/g enabled. Today, I bought a Lynksis Wireless-G broadband router in order to set up a little network.
Problem - I connected the Lynksis to the Westell modem and my imac to the to one of the four ethernet ports on the back of the Lynksis. I turned on my notebook, for the first time, did the set up wizard for the notebook. Then I did the Lynksis set up wizard for wireless connection to the internet (notebook wireless button was switched to the "on" position). I'm able to get signal on the notebook but I'm not able to completely connect (can't access the internet or web pages).
AND
My imac won't connect at all while set up as I described above.
The Lynksis does describe specifically PC compatibility but not Mac. I didn't think that would matter as I'm connecting the imac via ethernet cable to the Lynksis.
My limited connection on the notebook also is not a secure connection. I'm limited on my PC knowledge and even though I haven't looked into this issue, I think that should be easy to make secure but I would also appreciate your input on correcting the security of the connection (just in case it's not as easy as I think). The Lynksis has a one touch "secure easy set-up" button on the front of it, but I'm obviously missing something(s) because I don't have a secure connection.
I'd appreciate your help guy's.
Thanks.
Vanessa

From your description is that you've got both the Westell and the LinkSys acting as a NAT device.
Since the Westell modem allows you to have up to 253 devices on it's 'internal' network it's clear that it's using NAT (Network Address Translation) to share a single IP address from your ISP amongst those 253 devices.
Now what you've done is added a LinkSys router into the loop using one of those 253 addresses. The default setup for the LinkSys is to do the same thing - take a single IP address from an upstream device (in this case the Westell modem) and share it amongst another 253 devices using NAT. That's likely to be your problem.
You would be far better off configuring the LinkSys as a simple bridge rather than a router - that way it simply links the wireless network (including the Toshiba laptop) with the wired network (which includes the Westell, the iMac, and any other devices on the network).
In this setup the Westell will continue to use NAT and essentially control the network, and everything should work much better.
Check the LinkSys documentation for details on how to turn on its bridging mode.

Mac Pro screen issue

Hi all,
my mac pro shows the apple logo at start up and the users available.
Then, either the screen goes crazy with lots of moving thin grey lines or I get to
login in under my account and then the finder has lots of artifacting on the screen
- black blocks in the finder window or parts of top bar displays overlapping text. I've
had some odd black triangle across some of the finder windows too.
If I log in to the guest user (safari only mode) the screen is fine.
Is this a graphics card issue or something else?
p.s. I have tried installing 10.8 but alas, my mac is just one model out from being suported.
Cheers,
Steve
Mac pro
2x 2.66 GHx Dual-Core Interl Xeon
10.7.4

The 7300 as I said could be on its last legs also.
10.6.3 DVD is your best bet probably.
And it isn't that hard to setup and install and be back up and running.
But I would invest in a ATI 5770 regardless, you have 6 yr old system
ATI Radeon 5770 or Nvidia 8800GT
http://store.apple.com/us/product/MC742ZM/A
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M
http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html
How To Install and Remove Memory Mac Pro
https://support.apple.com/kb/HT4433
WD Black Caviar
http://www.amazon.com/Western-Digital-Caviar-Internal-Desktop/dp/B0036Q7MV0/
2x2GB FBDIMM DDR2 667MHz @ $54
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
Hardware Monitor
http://www.bresink.com/osx/HardwareMonitor.html
UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
Metro Vacuum ED500 DataVac 500-Watt 0.75-HP Electric Duster 120-Volt
www.amazon.com/Metro-Vacuum-ED500-500-Watt-Electric/dp/B001J4ZOAW/

DHCP mapped MAC to IP issue??

Similar Messages

Maybe you are looking for