Dhcp not allocating addresses
My network is managed by Mac Mini Server (Lion) with an Airport Extreme.
I have the wireless set up as WPA2 Enterprise with the Radius Server, Open Directory, DNS and DHCP running on my Mac Mini Server.
In the past week, possibly since the last updates were applied, all wireless devices are having real issues connecting to the network. They are authenticating OK but an address is either never assigned or appears after 5 or ten minutes. To verify this I tried to connect iPad. This was set to use DHCP and the wifi symbol appears intermittently at the top of screen but on the networks page a spinning wheel appears next to the network name and the address details (i.e local address, router, DNS, etc.) are all empty. If I configure for manually entered address details the deveice connects immediately and works fine. Switching back to DHCP and the problem comes back (i.e. connects to wifi but no address is ever allocated).
Any ideas on why DHCP would suddenly stop working. I have tried restarting the service, rebooting the Airport, rebooting the server but nothing seams to fix it. Every thing was working just fine for the past 6 months.
Thanks for reply.
Router is:
Netopia ADSL Gateway 3346N-002
4 port 10/100 Ethernet built-in
The settings in the Control Panel didn't show anything of note.
What's interesting is that when the user's laptop went back to the hotel again today, the same issue cropped again -- hotel's DHCP not giving IP Address. The office DHCP server was assigning no problem.
Then... I checked Access Connections Profiles and noticed that "Disable this wireless radio when switching to a different location" was not checked for any profiles.
I checked off on all profile and then the hotel DHCP made the connection.
I did read somewhere that a possible fix is to do an IPCONFIG/RELEASE * and then do an immediate Shutdown/Restart. Issue is that I didn't have this option on the user's laptop before I made the Access Connections fix.
Please reply to clarify or add anything -- I appreciate your quick response because I spent 4 additional hours last night.
Paul
Similar Messages
-
Help needed : DHCP not assigning addresses on VMware. click for more details.
Hello people of technet,
I'm new to this forum I was told I could get some help here. I need your help with an issue that I have on my network. As the title says, my DHCP server is not assigning addresses from a specific pool.
Information about the topology:
I have to sites linked with a VPN site to site connection. In the first site I have a DHCP Server, In the second site I have a client that should get an address automatically from the DHCP. I installed a DHCP relay agent on the server that manages the VPN
connection on the second site with a correct configuration. All other configurations are done right I verified a couple of times. I checked the connectivity with a ping test between the client (with static address for the test) from the second site to the
DHCP server from the first site, it is all working. The problem is that the DHCP server is not assigning addresses from the specific pool. All machines (4) run on windows server 2008 r2.
Thank you for your time and support, just tell me if you need more informations.I fixed the problem it is working now, apparently it was the VMnet cards that caused the issue I've just reseted their configuration to default state. I've had the idea after you asked me to check DHCP address assignement on the same site. One more thing
to do now, switch from the workgroup to a domain.
Thank you for you time. -
WRVS4400N : DHCP not assigning IP addresses if WAN link is down
Hello,
With the latest firmware installed (the one suporting fixed IP based on MAC), I have one problem: the DHCP server is not assigning addresses when the WAN link is down. When it is up, it generally assign IP based on the configuration binding (MAC/IP). But it sometimes fail to do so. Before using the wrvs4400n I had no issues with DHCP wrt54G and other routers.
Any hints ?
Thanks.
V.Hi there!
Thanks for contacting the business support - other guys got the same problem.
I'm now back on firmware version 1.00.16 and everything works fine.
But the new features were nice to have! -
I'm running an iMac with Mountain Lion. Not only do we do accounting work on this computer with AccountEdge, but the computer functions as a server to another computer in a different state.
Anyway, I set a static IP address (Using DHCP with manual address) on it (to allow for a VPN to the computer in the different state) and it is connected (green dot) - meaning that the other computer in the different state can connect to us via that ethernet line - but for some reason Safari, Messanger, and Apple Email won't work.
But if I switch a dynamic IP (DHCP auto), I can use the internet (Safari, messanger, email), but the computer in the different state can't connect to this computer.
How can I fix this so that the computer in the different state can connect to this computer and that the internet (Safari, messanger, and email) can work at the same time?
Much thanks!No but if they are using a VPN Tunnel for the connection that restricts all internet traffic over the tunnel. Which means you can't use that same computer to broswe the internet or connect to other computers or devices on your LAN.
I'd need to see the actual setup, router and the IP addresses you are using.
Networking and remote networking is fairly easy when you are in front of the systems you are working on. Doing it over the internet on a forum is almost impossible. Tha is why I suggested you get local help, like the person that originally set it up. -
Can't mount external HDD? "usb 1-1: Device not accepting address"
I just bought a Medion HDDRIVE2GO (Full Speed) from Aldi, and at first when I plugged it in, everything went fine (well, I thought so). Appearently it had some errors with HAL not being able to read the HDD (error name="(unset)").
I gave it a reboot, and now it does not work at all! In dmesg, I have this output (the bottom is the most important I guess)
[dell@linuxnas ~]$ dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable)
BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
last_pfn = 0x1ffe2 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 0FEDA0000 mask FFFFE0000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 0000000000100000 - 000000001ffe2800 (usable)
modified: 000000001ffe2800 - 0000000020000000 (reserved)
modified: 00000000feda0000 - 00000000fee00000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000001ffe2000
0000000000 - 0000400000 page 4k
0000400000 - 001fc00000 page 2M
001fc00000 - 001ffe2000 page 4k
kernel direct mapping tables up to 1ffe2000 @ 15000-1a000
RAMDISK: 1fe3b000 - 1ffd2770
ACPI: RSDP 000fde50 00014 (v00 DELL )
ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D4010C ASL 00000061)
ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D4010C ASL 00000061)
ACPI: DSDT fffe4000 0319C (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 1ffff800 00040
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ffe2000
low ram: 0 - 1ffe2000
node 0 low ram: 00000000 - 1ffe2000
node 0 bootmap 00016000 - 0001a000
(10 early reservations) ==> bootmem [0000000000 - 001ffe2000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
#3 [001fe3b000 - 001ffd2770] RAMDISK ==> [001fe3b000 - 001ffd2770]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001551000 - 0001557198] BRK ==> [0001551000 - 0001557198]
#6 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#7 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#8 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#9 [0000016000 - 000001a000] BOOTMAP ==> [0000016000 - 000001a000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001ffe2
HighMem 0x0001ffe2 -> 0x0001ffe2
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001ffe2
On node 0 totalpages: 130931
free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3953 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125954 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s34776 r0 d22568 u4194304
pcpu-alloc: s34776 r0 d22568 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129907
Kernel command line: root=/dev/disk/by-uuid/5501fa6d-1664-41e3-ac30-9a475cc6843d ro vga=773
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 2620840 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 509220k/524168k available (2895k kernel code, 14260k reserved, 1208k data, 408k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07e2000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB)
.init : 0xc1403000 - 0xc1469000 ( 408 kB)
.data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
.text : 0xc1000000 - 0xc12d3f1e (2895 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1993.528 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.18 BogoMIPS (lpj=6645093)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20091214
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3988.18 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [PADA] (on)
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfed9ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfee00000-0xffb7ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xfff7ffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
pci 0000:00:1d.0: reg 20: [io 0xbf80-0xbf9f]
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0xbfa0-0xbfaf]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
pci 0000:00:1f.5: reg 14: [io 0xdc80-0xdcbf]
pci 0000:00:1f.6: reg 10: [io 0xd400-0xd4ff]
pci 0000:00:1f.6: reg 14: [io 0xdc00-0xdc7f]
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 18: [mem 0xfcff0000-0xfcffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci 0000:02:00.0: reg 10: [io 0xec80-0xecff]
pci 0000:02:00.0: reg 14: [mem 0xf8fffc00-0xf8fffc7f]
pci 0000:02:00.0: reg 30: [mem 0xf9000000-0xf901ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:01.1: supports D1 D2
pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-10] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: disabling [io 0x0800-0x0805] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:02: disabling [io 0x0808-0x080f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0806-0x0807] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0810-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0860-0x087f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:04: disabling [io 0xf000-0xf0fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf100-0xf1fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf200-0xf2fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf400-0xf4fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf500-0xf5fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf600-0xf6fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf800-0xf8fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf900-0xf9fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfa00-0xfafe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfc00-0xfcfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfd00-0xfdfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfe00-0xfefe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [mem 0xfa000000-0xfbffffff] because it overlaps 0000:00:1e.0 BAR 14 [mem 0xf4000000-0xfbffffff]
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
system 00:00: [mem 0x1fff0000-0x1fffffff] has been reserved
system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0880-0x08bf] has been reserved
system 00:03: [io 0x08c0-0x08df] has been reserved
system 00:03: [io 0x08e0-0x08ff] has been reserved
system 00:09: [io 0x0900-0x091f] has been reserved
system 00:09: [io 0x03f0-0x03f1] has been reserved
system 00:0f: [io 0xbf40-0xbf5f] has been reserved
system 00:0f: [io 0xbf20-0xbf3f] has been reserved
system 00:10: [mem 0xfebffc00-0xfebfffff] has been reserved
pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0x28000000-0x280003ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0x28000000-0x280003ff] (PCI address [0x28000000-0x280003ff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci 0000:02:01.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
pci 0000:02:01.0: BAR 16: assigned [mem 0xf4000000-0xf7ffffff]
pci 0000:02:01.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
pci 0000:02:01.1: BAR 16: assigned [mem 0x2c000000-0x2fffffff]
pci 0000:02:01.0: BAR 0: assigned [mem 0xf8000000-0xf8000fff]
pci 0000:02:01.0: BAR 0: set to [mem 0xf8000000-0xf8000fff] (PCI address [0xf8000000-0xf8000fff]
pci 0000:02:01.1: BAR 0: assigned [mem 0xf8001000-0xf8001fff]
pci 0000:02:01.1: BAR 0: set to [mem 0xf8001000-0xf8001fff] (PCI address [0xf8001000-0xf8001fff]
pci 0000:02:01.0: BAR 13: assigned [io 0xe000-0xe0ff]
pci 0000:02:01.0: BAR 14: assigned [io 0xe400-0xe4ff]
pci 0000:02:01.1: BAR 13: assigned [io 0xe800-0xe8ff]
pci 0000:02:01.1: BAR 14: assigned [io 0xf000-0xf0ff]
pci 0000:02:01.0: CardBus bridge to [bus 03-06]
pci 0000:02:01.0: bridge window [io 0xe000-0xe0ff]
pci 0000:02:01.0: bridge window [io 0xe400-0xe4ff]
pci 0000:02:01.0: bridge window [mem 0x20000000-0x23ffffff pref]
pci 0000:02:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:02:01.1: CardBus bridge to [bus 07-0a]
pci 0000:02:01.1: bridge window [io 0xe800-0xe8ff]
pci 0000:02:01.1: bridge window [io 0xf000-0xf0ff]
pci 0000:02:01.1: bridge window [mem 0x24000000-0x27ffffff pref]
pci 0000:02:01.1: bridge window [mem 0x2c000000-0x2fffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-10]
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:02:01.1: enabling device (0000 -> 0003)
pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
pci_bus 0000:02: resource 3 [io 0x0000-0xffff]
pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xe0ff]
pci_bus 0000:03: resource 1 [io 0xe400-0xe4ff]
pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
pci_bus 0000:03: resource 3 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 0 [io 0xe800-0xe8ff]
pci_bus 0000:07: resource 1 [io 0xf000-0xf0ff]
pci_bus 0000:07: resource 2 [mem 0x24000000-0x27ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x2c000000-0x2fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1629k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1274299821.609:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 998
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, using 1536k, total 32768k
vesafb: mode is 1024x768x8, linelength=1024, pages=41
vesafb: protected mode interface info at c000:549f
vesafb: pmi: set display start = c00c5533, set palette = c00c557f
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a post-1991 82077
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata2.01: NODEV after polling detection
ata1.00: ATA-6: HTS548040M9AT00, MG2OA5EA, max UDMA/100
ata1.00: 78140160 sectors, multi 8: LBA48
ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8081N, 0108, max MWDMA2
ata2.00: configured for MWDMA2
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8081N 0108 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 sda3 sda4
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
udev: starting version 151
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_rng: FWH not detected
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.103
Marking TSC unstable due to TSC halts in idle
input: PC Speaker as /devices/platform/pcspkr/input/input2
ACPI: AC Adapter [AC] (on-line)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SBTN]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Switching to clocksource acpi_pm
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
parport_pc 00:0e: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
iTCO_vendor_support: vendor-support=0
agpgart-intel 0000:00:00.0: Intel 845G Chipset
lp: driver loaded but no devices found
lp0: using parport0 (interrupt-driven).
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
ppdev: user-space parallel port driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (57 C)
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x9b4cb1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:012a]
yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.0: TI: mfunc 0x01261222, devctl 0x64
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.0: Socket status: 30000006
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others.
0000:02:00.0: 3Com PCI 3c905C Tornado at e0c6ac00.
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:012a]
yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.1: TI: mfunc 0x01261222, devctl 0x64
usb 1-1: new full speed USB device using uhci_hcd and address 2
[drm] Initialized drm 1.1.0 20060810
yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.1: Socket status: 30000006
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xFCFF0000
[drm] register mmio size: 65536
[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] radeon: VRAM 64M
[drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[drm] radeon: GTT 64M
[drm] radeon: GTT from 0xE8000000 to 0xEBFFFFFF
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=64M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 255756 kiB.
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 64M of GTT memory ready.
[drm] radeon: cp idle (0x00008383)
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
usb 1-1: new full speed USB device using uhci_hcd and address 3
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[drm] radeon: ring at 0x00000000E8000000
[drm] ring test succeeded in 1 usecs
intel8x0_measure_ac97_clock: measured 52675 usecs (2532 samples)
intel8x0: clocking to 48000
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Panel ID String: QDI141X1LH03
[drm] Panel Size 1024x768
[drm] Default TV standard: NTSC
[drm] 27.000000000 MHz TV ref clk
[drm] No TV DAC info found in BIOS
[drm] Default TV standard: NTSC
[drm] 27.000000000 MHz TV ref clk
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] Connector 2:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
usb 1-1: device descriptor read/64, error -71
[drm] fb mappable at 0xE0040000
[drm] vram apper at 0xE0000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
usb 1-1: device descriptor read/64, error -71
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: device not accepting address 4, error -71
EXT4-fs (sda4): mounted filesystem with ordered data mode
usb 1-1: new full speed USB device using uhci_hcd and address 5
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
psmouse serio2: ID: 10 00 64
usb 1-1: device not accepting address 5, error -71
hub 1-0:1.0: unable to enumerate USB device on port 1
eth0: setting full-duplex.
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio2/input/input8
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
lspci (Is this useable info?)
[dell@linuxnas ~]$ lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
02:01.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:01.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus ControllerI found this post on linux forums which say It's a HAL related problem.
"rmmod ehci_hcd" made it work for some of these guys Which one of them explains It's a data speed issue. Cables.., 2.0 1.0, that sort of things. Read it, I bet you'll get more out of it, It's old though.
Try removing the module, plugging the drive, check dmesg, and mount manually.
Last edited by Ekimino (2010-05-20 01:23:54) -
RID Master not allocating new rid pool
Hi guys,
I am having some problems with my server. I am unable to create new AD objects with the message, the directory has exhausted the pool of relative identifiers. I have a SBS 2003 environment with only that as the DC. However, a while ago, the previous
admin promoted another server (Server 2003) as a Backup DC and later on the network was split and the Secondary DC no longer connected to the domain. It was not demoted or anything like that. The network was split in two and now after almost a year I am unable
to create new objects. The PDC has all the FSMO roles as indicated when i run the netdom query fsmo command. Below is the dcdiag /v output:
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine wsgpdc, is a DC.
* Connecting to directory service on server wsgpdc.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\WSGPDC
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... WSGPDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\WSGPDC
Starting test: Replications
* Replications Check
[Replications Check,WSGPDC] Inbound replication is disabled.
To correct, run "repadmin /options WSGPDC -DISABLE_INBOUND_REPL"
[Replications Check,WSGPDC] Outbound replication is disabled.
To correct, run "repadmin /options WSGPDC -DISABLE_OUTBOUND_REPL"
......................... WSGPDC failed test Replications
Test omitted by user request: Topology
Test omitted by user request: CutoffServers
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC WSGPDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=WSG,DC=local
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=WSG,DC=local
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=WSG,DC=local
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=WSG,DC=local
(Configuration,Version 2)
* Security Permissions Check for
DC=WSG,DC=local
(Domain,Version 2)
......................... WSGPDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\WSGPDC\netlogon
Verified share \\WSGPDC\sysvol
......................... WSGPDC passed test NetLogons
Starting test: Advertising
The DC WSGPDC is advertising itself as a DC and having a DS.
The DC WSGPDC is advertising as an LDAP server
The DC WSGPDC is advertising as having a writeable directory
The DC WSGPDC is advertising as a Key Distribution Center
The DC WSGPDC is advertising as a time server
The DS WSGPDC is advertising as a GC.
......................... WSGPDC passed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
Role Domain Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
Role PDC Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
Role Rid Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
......................... WSGPDC passed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 2609 to 1073741823
* wsgpdc.WSG.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 2109 to 2608
* rIDPreviousAllocationPool is 2109 to 2608
* rIDNextRID: 2608
* Warning :Next rid pool not allocated
* Warning :There is less than 0% available RIDs in the current pool
......................... WSGPDC passed test RidManager
Starting test: MachineAccount
Checking machine account for DC WSGPDC on DC WSGPDC.
* SPN found :LDAP/wsgpdc.WSG.local/WSG.local
* SPN found :LDAP/wsgpdc.WSG.local
* SPN found :LDAP/WSGPDC
* SPN found :LDAP/wsgpdc.WSG.local/WSG
* SPN found :LDAP/2af33017-abf3-4f05-9b9c-c19eb3868401._msdcs.WSG.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/2af33017-abf3-4f05-9b9c-c19eb3868401/WSG.local
* SPN found :HOST/wsgpdc.WSG.local/WSG.local
* SPN found :HOST/wsgpdc.WSG.local
* SPN found :HOST/WSGPDC
* SPN found :HOST/wsgpdc.WSG.local/WSG
* SPN found :GC/wsgpdc.WSG.local/WSG.local
......................... WSGPDC passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
IsmServ Service is stopped on [WSGPDC]
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... WSGPDC failed test Services
Test omitted by user request: OutboundSecureChannels
Starting test: ObjectsReplicated
WSGPDC is in domain DC=WSG,DC=local
Checking for CN=WSGPDC,OU=Domain Controllers,DC=WSG,DC=local in domain DC=WSG,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local in domain CN=Configuration,DC=WSG,DC=local on 1 servers
Object is up-to-date on all servers.
......................... WSGPDC passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... WSGPDC passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
An Error Event occured. EventID: 0xC0003500
Time Generated: 04/29/2014 06:19:58
(Event String could not be retrieved)
......................... WSGPDC failed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... WSGPDC passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0x00000457
Time Generated: 04/29/2014 18:58:21
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/29/2014 18:58:22
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/29/2014 18:58:22
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/29/2014 18:58:22
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/29/2014 18:58:23
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/29/2014 18:58:23
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/29/2014 18:58:24
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/29/2014 18:58:31
(Event String could not be retrieved)
......................... WSGPDC failed test systemlog
Test omitted by user request: VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=WSGPDC,OU=Domain Controllers,DC=WSG,DC=local and backlink on
CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=WSGPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=WSG,DC=local
and backlink on CN=WSGPDC,OU=Domain Controllers,DC=WSG,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=WSGPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=WSG,DC=local
and backlink on
CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
are correct.
......................... WSGPDC passed test VerifyReferences
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: CheckSecurityError
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : WSG
Starting test: CrossRefValidation
......................... WSG passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... WSG passed test CheckSDRefDom
Running enterprise tests on : WSG.local
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... WSG.local passed test Intersite
Starting test: FsmoCheck
GC Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
PDC Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
Time Server Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
Preferred Time Server Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
KDC Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
......................... WSG.local passed test FsmoCheck
Test omitted by user request: DNS
Test omitted by user request: DNS
Also, another problem I am experiencing seems to point to my DNS service which also runs on the same machine. When I try to open Active Directory snap ins, it indicates that the domain does not exist or cannot be contacted and the AD is unable to load.
I'd really appreciate any help at the moment. Thanks in advance.
ShawnIdan,
Yes I followed the article regarding removing data in AD with NTDSUTIL. There is one domain and one site, but it states that there is "no current server" and "no current naming context"
My TCP/IP config was set to 127.0.0.1 but then I changed it to point to its static IP Address, but I stumbled onto a best practice article which indicated that the 127 address was preferred, so I changed it back. I changed it as you said and ran the commands
you asked for:
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine wsgpdc, is a DC.
* Connecting to directory service on server wsgpdc.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\WSGPDC
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... WSGPDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\WSGPDC
Starting test: Replications
* Replications Check
[Replications Check,WSGPDC] Inbound replication is disabled.
To correct, run "repadmin /options WSGPDC -DISABLE_INBOUND_REPL"
[Replications Check,WSGPDC] Outbound replication is disabled.
To correct, run "repadmin /options WSGPDC -DISABLE_OUTBOUND_REPL"
......................... WSGPDC failed test Replications
Test omitted by user request: Topology
Test omitted by user request: CutoffServers
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC WSGPDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=WSG,DC=local
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=WSG,DC=local
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=WSG,DC=local
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=WSG,DC=local
(Configuration,Version 2)
* Security Permissions Check for
DC=WSG,DC=local
(Domain,Version 2)
......................... WSGPDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\WSGPDC\netlogon
Verified share \\WSGPDC\sysvol
......................... WSGPDC passed test NetLogons
Starting test: Advertising
The DC WSGPDC is advertising itself as a DC and having a DS.
The DC WSGPDC is advertising as an LDAP server
The DC WSGPDC is advertising as having a writeable directory
The DC WSGPDC is advertising as a Key Distribution Center
The DC WSGPDC is advertising as a time server
The DS WSGPDC is advertising as a GC.
......................... WSGPDC passed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
Role Domain Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
Role PDC Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
Role Rid Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
......................... WSGPDC passed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 2609 to 1073741823
* wsgpdc.WSG.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 2109 to 2608
* rIDPreviousAllocationPool is 2109 to 2608
* rIDNextRID: 2608
* Warning :Next rid pool not allocated
* Warning :There is less than 0% available RIDs in the current pool
......................... WSGPDC passed test RidManager
Starting test: MachineAccount
Checking machine account for DC WSGPDC on DC WSGPDC.
* SPN found :LDAP/wsgpdc.WSG.local/WSG.local
* SPN found :LDAP/wsgpdc.WSG.local
* SPN found :LDAP/WSGPDC
* SPN found :LDAP/wsgpdc.WSG.local/WSG
* SPN found :LDAP/2af33017-abf3-4f05-9b9c-c19eb3868401._msdcs.WSG.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/2af33017-abf3-4f05-9b9c-c19eb3868401/WSG.local
* SPN found :HOST/wsgpdc.WSG.local/WSG.local
* SPN found :HOST/wsgpdc.WSG.local
* SPN found :HOST/WSGPDC
* SPN found :HOST/wsgpdc.WSG.local/WSG
* SPN found :GC/wsgpdc.WSG.local/WSG.local
......................... WSGPDC passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
IsmServ Service is stopped on [WSGPDC]
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... WSGPDC failed test Services
Test omitted by user request: OutboundSecureChannels
Starting test: ObjectsReplicated
WSGPDC is in domain DC=WSG,DC=local
Checking for CN=WSGPDC,OU=Domain Controllers,DC=WSG,DC=local in domain DC=WSG,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local in domain CN=Configuration,DC=WSG,DC=local on 1 servers
Object is up-to-date on all servers.
......................... WSGPDC passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... WSGPDC passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
An Error Event occured. EventID: 0xC0003500
Time Generated: 04/30/2014 06:17:45
(Event String could not be retrieved)
An Warning Event occured. EventID: 0x800034FA
Time Generated: 04/30/2014 06:17:45
(Event String could not be retrieved)
......................... WSGPDC failed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... WSGPDC passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:45:49
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:45:49
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:45:50
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:45:50
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:45:51
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:45:51
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:45:58
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:46:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:56:39
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:56:39
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:56:40
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:56:40
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:56:40
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:56:42
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:56:43
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 04/30/2014 15:56:43
(Event String could not be retrieved)
......................... WSGPDC failed test systemlog
Test omitted by user request: VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=WSGPDC,OU=Domain Controllers,DC=WSG,DC=local and backlink on
CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=WSGPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=WSG,DC=local
and backlink on CN=WSGPDC,OU=Domain Controllers,DC=WSG,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=WSGPDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=WSG,DC=local
and backlink on
CN=NTDS Settings,CN=WSGPDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=WSG,DC=local
are correct.
......................... WSGPDC passed test VerifyReferences
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: CheckSecurityError
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : WSG
Starting test: CrossRefValidation
......................... WSG passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... WSG passed test CheckSDRefDom
Running enterprise tests on : WSG.local
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... WSG.local passed test Intersite
Starting test: FsmoCheck
GC Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
PDC Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
Time Server Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
Preferred Time Server Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
KDC Name: \\wsgpdc.WSG.local
Locator Flags: 0xe00001fd
......................... WSG.local passed test FsmoCheck
Test omitted by user request: DNS
Test omitted by user request: DNS
Computer Name: WSGPDC
DNS Host Name: wsgpdc.WSG.local
System info : Microsoft Windows Server 2003 (Build 3790)
Processor : x86 Family 6 Model 15 Stepping 11, GenuineIntel
List of installed hotfixes :
KB2079403
KB2115168
KB2121546
KB2124261
KB2229593
KB2264107
KB2296011
KB2345886
KB2347290
KB2360937
KB2378111
KB2387149
KB2393802
KB2412687
KB2416451
KB2419635
KB2423089
KB2440591
KB2443105
KB2443685
KB2476490
KB2476687
KB2478953
KB2478960
KB2478971
KB2481109
KB2483185
KB2485663
KB2492386
KB2497640
KB2497640-IE8
KB2503658
KB2503665
KB2506212
KB2506223
KB2507618
KB2507938
KB2508272
KB2508429
KB2509553
KB2510531-IE8
KB2510587
KB2511455
KB2524375
KB2524426
KB2530548-IE8
KB2535512
KB2536276
KB2536276-v2
KB2544521-IE8
KB2544893
KB2544893-v2
KB2555917
KB2559049-IE8
KB2562485
KB2564958
KB2566454
KB2567053
KB2567680
KB2570222
KB2570947
KB2571621
KB2572069
KB2584146
KB2585542
KB2586448-IE8
KB2592799
KB2598479
KB2601626
KB2603381
KB2604078
KB2607712
KB2616676
KB2618444-IE8
KB2618451
KB2620712
KB2621146
KB2621440
KB2624667
KB2631813
KB2633171
KB2638806
KB2639417
KB2641653
KB2641690-v2
KB2644615
KB2645640
KB2646524
KB2647170
KB2647516-IE8
KB2653956
KB2655992
KB2656358
KB2656376
KB2656376-v2
KB2659262
KB2660465
KB2661254
KB2675157-IE8
KB2676562
KB2685939
KB2686509
KB2691442
KB2698032
KB2698365
KB2699988-IE8
KB2705219
KB2707511
KB2709162
KB2712808
KB2718523
KB2718704
KB2719985
KB2722913-IE8
KB2724197
KB2727528
KB2731847
KB2742604
KB2744842-IE8
KB2748349
KB2749655
KB2753842
KB2753842-v2
KB2758857
KB2761226
KB2761465-IE8
KB2770660
KB2772930
KB2778344
KB2779030
KB2780091
KB2792100-IE8
KB2797052-IE8
KB2799329-IE8
KB2799494
KB2803821
KB2803821-v2
KB2807986
KB2808735
KB2809289-IE8
KB2813170
KB2813345
KB2817183-IE8
KB2820197
KB2820917
KB2829361
KB2829530-IE8
KB2833949
KB2834886
KB2838727-IE8
KB2839229
KB2845187
KB2846071-IE8
KB2847204-IE8
KB2847311
KB2849470
KB2850851
KB2850869
KB2859537
KB2862152
KB2862330
KB2862335
KB2862772-IE8
KB2864058
KB2864063
KB2868038
KB2868626
KB2870699-IE8
KB2876217
KB2876315
KB2876331
KB2879017-IE8
KB2883150
KB2892076
KB2893294
KB2893984
KB2898715
KB2898785-IE8
KB2898860
KB2900986
KB2901115
KB2909210-IE8
KB2909921-IE8
KB2914368
KB2916036
KB2922229
KB2923392
KB2925418-IE8
KB2929961
KB2930275
KB2936068-IE8
KB923561
KB925398_WMP64
KB925876
KB925902-v2
KB927891
KB929123
KB932168
KB933854
KB936357
KB938127
KB938759-v4
KB941569
KB942831
KB943055
KB943729
KB944653
KB946026
KB948496
KB950762
KB950974
KB952004
KB952069
KB952954
KB953298
KB954155
KB954550-v5
KB956263
KB956572
KB956802
KB956844
KB958469
KB958644
KB959426
KB960803
KB960859
KB961063
KB961118
KB961501
KB967715
KB967723
KB968389
KB969059
KB969883
KB970483
KB971029
KB971032
KB971513
KB971657
KB971737
KB972270
KB973507
KB973540
KB973815
KB973825
KB973869
KB973904
KB973917-v2
KB974112
KB974318
KB974392
KB974571
KB975025
KB975467
KB975558_WM8
KB975560
KB975562
KB975713
KB976323
KB977816
KB977914
KB978338
KB978542
KB978601
KB978695
KB978706
KB979309
KB979482
KB979687
KB979907
KB980232
KB980436
KB981322
KB982132
KB982632-IE8
KB982666
Q147222
Netcard queries test . . . . . . . : Passed
Per interface results:
Adapter : Server Local Area Connection
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : wsgpdc
IP Address . . . . . . . . : 192.168.1.2
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Dns Servers. . . . . . . . : 192.168.1.2
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03> 'Messenger Service', <20> 'WINS' names is missing.
No remote names have been found.
WINS service test. . . . . : Skipped
There are no WINS servers configured for this interface.
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{5995589E-FC82-4DD9-8A92-33B572B20DE3}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server '192.168.1.2' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{5995589E-FC82-4DD9-8A92-33B572B20DE3}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{5995589E-FC82-4DD9-8A92-33B572B20DE3}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Skipped
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Replication Summary Start Time: 2014-04-30 16:16:23
Beginning data collection for replication summary, this may take awhile:
Source DC largest delta fails/total %% error
WSGBDC >60 days 5 / 5 100 (8457) The destination server is currently rejecting replication requests.
Destination DC largest delta fails/total %% error
WSGPDC >60 days 5 / 5 100 (8457) The destination server is currently rejecting replication requests.
Experienced the following operational errors trying to retrieve replication information:
58 - wsgbdc.WSG.local
In the event viewer there are two errors in the Directory Service, Error ID 2089 and 1864 both regarding replication not taking place. -
DHCP with manual address doesn't work
My ISP has decided that they won't support static addresses for the
DHCP servers anymore. I'd really like to keep static IP addresses, so
I tried using the "DHCP with manual address." Unfortunately, it
doesn't recognize my Router which is serving DHCP. What's busted here?
Is it Tiger or is it my router (old mansesnse MIH-130).
Any help is appreciated.
thanks.Comcast I believe is a cable connection.
Interesting, I found that if I continue to manually configure the
TCP/IP settings and just point the DNS to the router (192.168.1.1),
all works perfectly. This worked for 10.4.5, 9.2 and Yellowdog Linux as well.
When you say your isp is no longer using static ip addresses this only affecs your WAN ip. Setup your router to receieve internet via DHCP.
Your LAN ip addresss won't change. You can give all your macs static ip addresses if you like. It does not affect your WAN IP. -
Here's the situation;
4402 controller (2 actually), AP-manager and manager in vlan 1, untagged, native vlan of trunked switchport set to 1. Not using LAG at this time. See access points, so that works (DHCP in VLAN 1).
Got 3 additional data VLAN's. Created 3 dynamic interaces with IP's in that specific VLAN, and 3 WLAN's. Have 3 DHCP server addresses (one DHCP server per VLAN) and i configured these server addresses on the dynamic interface, not on the WLAN.
Clients get associated, but cannot get an IP address.
Should this work or should i configure the DHCP server on the WLAN's instead?
And does a 2003 server needs config to accept DHCP relay?Hi Friend,
You need not have DHCP server on every VLAN. You can have one DHCP server with multiple pools for different subnet and can attach your DHCP server on one VLAN as you have done in your case on vlan 2.
You can simply have layer 3 device doing routing between your data vlans and vlan having DHCP server.
When you specify your DHCP server IP address on your interfaces which you have configured on controller it will play a role of relay agent.
If you routing is fine between your vlans and you have specified your dhcp server ip address under interface configuration on controller it should work.
Tell me if I got your problem or not and if not can you please explain your problem again.
Regards,
Ankur -
Leopard : Network : Unable to use DHCP with manual address.
After installing Leopard on my Macmini (PowerPC 1.42Ghz, 1GB RAM, 80GB HDD), I found my IP address obtains different IP address than Panther and Tiger use. Then I go into System Preferences -> Network -> select Ethernet -> select "Using DHCP with manual address" in the "Configure" combo box, and change the IP address from 192.168.0.8 to 192.168.0.100. Once I hit apply, the network connection never comes back. There is no complaint that another computer is using the 192.168.0.100 IP address. This works if I am using Panther or Tiger on the same computer.
Any help is appreciated.Setting the DHCP to a number you want to use can be very useful in a busy environment. I usually choose to use numbers that are outside of the range of numbers being controlled by my router (Westell).
Port Forwarding for services like ARD, Azureus, or any server application break when the IP number changes for any reason.
Some routers will not allow numbers outside of a restricted range of numbers that can be set up in the router configuration menu's. In this case, I find out if the router is assigning numbers from the high or low end and make sure I assign numbers at the opposite end of the range.
My Westell router does allow me to use numbers other than the range of 50 numbers it has been told to use for DHCP, but I have also encountered problems when trying this on a wireless connection. -
Using WPA results in "self-assigned IP" / DHCP not working / Comm prob?
Hi,
New to the forum...just replaced all wintel boxes with new macs (macbook pro and mac mini; both at 10.4.6) talking to a new AEBS (updated firmware) which is connected to a Comcast cable modem.
Configuring the AEBS without security results in a very happy network...good range and DHCP behaves properly...handing IP addresses to both clients promptly and the throughput as reflected by www.speakeasy.net/speedtest is great.
Adding wireless security to the mix, be it WPA+WPA2; WPA2; WPA; WEP, creates problems. If I configure the AEBS with WPA+WPA2, for instance, put in a password, update the router, reboot the cable modem and the router, delete any existing preferred networks, add a new preferred network with WPA2 and the correct password (btw, I have cleared my keychain to avoid any password caching problems) and apply the changes the following behavior occurs like clockwork: The client connects to the AEBS, as reflected in the status in the network preferences window and the internet connect window, but it never gets an IP address from the AEBS and is stuck in the "self-assigned IP" / 169.x.x.x abyss. I wait much longer than 40 seconds and nothing ever changes. In addition, attempting to configure the AEBS while in this state (from airport admin utility) results in a very long attempt to read the configuration which never works - I need to connect with ethernet to reconfigure. If I go back and remove the security policy on both sides the network works just fine...including the ability to configure the AEBS over wireless.
For the record, the AEBS settings are: Open network; channel 11; b only; no interference robustness set; uses DHCP for IP from cable modem; distributes IP addresses - shares single IP address using DHCP + NAT using 192.168.1.1 addressing. All of that seems appropriate and correct but, hey, it ain't working and I am out of ideas.
All help is welcome! Thanks.
macbook pro Mac OS X (10.4.6) mac mini
macbook pro Mac OS X (10.4.6) mac mini
macbook pro Mac OS X (10.4.6) mac mini
macbook pro Mac OS X (10.4.6) mac miniHey Rich,
I eventually got mine to work but I really cannot give you a clear view of how...it was hit or miss. If you are running into the same thing, I might be able to guide you to the same resolution.
When you turn on WEP or WPA, does the network connect but not get an IP address from DHCP (self-assigned address abyss) or does it not connect at all? Asked another way, what does the system preferences / show / network status page say for the wireless network in question?
-matt
macbook pro Mac OS X (10.4.6) mac mini -
Contacts NOT in Address Book Syncing to iPhone
Long story short, I created a distribution list for my father in law with 800 addresses in it. Then deleted all the cards and distribution list. They still show up in my iPhone, no matter what I do.
I have tried the following:
#1 Confirmed they are not in address book, at all, whatsoever
#2 Unchecked sync addresses, and re-sync, still showing up
#3 Under Advanced, checked replace information on this iPhone - Contacts
#4 Confirmed my addresses are not syncing via Mobile Me
#5 Confirmed latest version of iTunes 10.1.1 and iOS4.
Any ideas? I can't even manually delete them from the iPhone without a 3rd Party App.
Thanks for the help.
CP StaleyLong story short, I created a distribution list for my father in law with 800 addresses in it. Then deleted all the cards and distribution list. They still show up in my iPhone, no matter what I do.
I have tried the following:
#1 Confirmed they are not in address book, at all, whatsoever
#2 Unchecked sync addresses, and re-sync, still showing up
#3 Under Advanced, checked replace information on this iPhone - Contacts
#4 Confirmed my addresses are not syncing via Mobile Me
#5 Confirmed latest version of iTunes 10.1.1 and iOS4.
Any ideas? I can't even manually delete them from the iPhone without a 3rd Party App.
Thanks for the help.
CP Staley -
Hi All,
I have been using Mail for the past three years without need to send a regular mailing list mailout.
I now need to send group emails and all I want to do is browse my contacts aquired over the last three years to create a list. I have not used Address Book for anything other than phone contacts so please do not point me in that dirrection.
There must be a list of all email contacts stored somewhere on the Mac that I can look through. It is an almost impossible task to do this by browsing my inbox/sent folders.
Hope you can help and thanks in advance!
Best
Adam0. find the user id.
a. log in as that specific user.
b. run terminal
c. type "echo $UID"
d. write down the user id that will be displayed
1. Go to the finder
2. go to the user home folder
3. click the box with the magnifying glass (upper right corner of the window)
4. type .jpg
5. a menu will pop under the magnifying glass box, select "jpg image"
6. click the "plus" sign that's displayed to the right of the word "save"
7. two pull down menus will appear, select "other" from the first one
8. a new window will pull down, scroll to "owner" and select it
9. back in the original window type the user id (a number) to the right of "owner" "equals"
Hope this helps -
so all of a suddun i open terminal and i get
login(1685,0x7fff73770960) malloc: *** error for object 0x106d2c4d0: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
[Process completed]
in the terminal window any help?Launch the Console application by entering the first few letters of its name into a Spotlight search, and look under "User Diagnostic Reports" for crash logs related to "login." Select the most recent one and post the contents -- the text, please, not a screenshot.
-
Maps not Reading Addresses in Contacts
I have updated a contact's address. The new address shows up on my iphone (where I made the change), mobile me online and address book on my macbook. However, when I open the map app on my phone and type in the person's name, her old address pops up. How to I get the map to recognize the addresses currently in my contacts (not old addresses)?
The update was made 2 days ago so I don't think time is an issue (as in it hasn't had time to recognize the change). Help!I have updated a contact's address. The new address shows up on my iphone (where I made the change), mobile me online and address book on my macbook. However, when I open the map app on my phone and type in the person's name, her old address pops up. How to I get the map to recognize the addresses currently in my contacts (not old addresses)?
The update was made 2 days ago so I don't think time is an issue (as in it hasn't had time to recognize the change). Help! -
Attaching "faux notes" to Address Book contacts
Lots of CRMs and Personal Organizers let you attach multiple notes to a Contact, along with a datetime stamp for that Note. Address Book does not, alas.
Leopard's Email client, however, let's you create free-standing Notes for your Inbox (or wherever you drag them). But these cannot be attached to a contact.
My "workaround" for this is:
1) Create a new "ON MY MAC" mailbox called "Faux Notes"
2) Create a New Message for the contact(s) you want to affiliate this "faux note" to
3) Save it as a Draft
4) Drag it from the "Drafts" folder over to your "Faux Notes" mailbox. This shall ensure that you cannot email your note off to the contact(s) by mistake. The Faux Note also becomes read-only at this point.
5) If you want to edit or add to that "Faux Note," then you must first drag it back to the Drafts folder.
Voila!
Benefits:
A) Faux Notes are searchable in Spotlight (as are regular Notes).
B) Faux Notes show up in Smart Mailboxes such as those created by the handy "Mailboxer" utility (http://earthlingsoft.net/Mailboxer).
Now, I just wish I could figure out how to attach a button to the View Contacts pane of Address Book that would kick off an on-they-fly Spotlight query for mail to/from all the email addresses affiliated with that Contact, as in:
[email protected] kind:email OR [email protected] kind:email OR [email protected] kind:email
Feedback welcome! I'm a recent Mac convert after having PCs for the past 15 years.
Regards,
Alan.I placed this question up here almost two years ago, and the problem has since resolved itself. I think because I have upgraded my mac's operating system (OS) several times since then.
You might want to check and see if you're using the latest version of Mac OS X (currently 10.8.4). If you're not up-to-date, go into the App Store on your Mac and see if there is an OS update waiting for you. That might help.
Good luck.
Maybe you are looking for
-
I recently bought a canon camera. The instructions of the camara recommend to use the canon software (camara window) to download pictures to my computer. I would like to have my pictures in i-photo because it syncs them to my ipad. I want to downloa
-
Dear Friends While creating Excise JV for CENVAT adjustments (othr. adjs). and entering all the details for account RG23A I have entered the BED, ECS and TAX1 amounts. However on clicking on Detemine G/L Accounts the system does not display any G/L a
-
Notification to third party tool in an infospoke
Hi, I am trying to create an infospoke.In the 'Destination' tab, i selected database table. Below that there is a checkbox for "notification to third part tool" What does this mean? Sindhura.
-
I have both programs but I have attempted to link these two Adobe programs together to help my post production process with out sucess. Can you help me with this issue. Thanks you for your help on this issue. [ edited by forum host - email address
-
Final cut x not synchronizing clips
Odd behavior, FCPX is not synchrinizing the audio/video clips. I quit FCPX and restarted, it synced the first a/v clip but would not do the second that I selected. It is going through the processing acting like it is going to work then nothing. No