DHCP on both Wifi and LAN ports?

Everything works well; Wifi clients (MAC only), AppleTV, USB Hub with Printer and 3 External disks etc...
I plug in my MacPro via a LAN Cable and it does not get a valid IP Address from the DHCP server.
Tried setting a fixed IP with all the proper config, nothing gives.
I am a tried and true IT professional with over 20 years, and can't figure this one out. Anyone else have this problem?

That certainly should work. The AirPort Extreme base station (AEBS) supports both wired clients (via the LAN ports) and wireless clients. All clients appear on the same subnet.
The MacPro has 2 Ethernet ports? Have you tried both of them? Check the Network preference pane to ensure that the one you are using is enabled.
Otherwise... have you tried using one of the other LAN ports? Have you tried a different Ethernet cable to eliminate the possibility of a defective cable?

Similar Messages

Can I use both Wifi and a Lan connection at the same time?

With me back in the dorms I have been limited to a slower connection than what I would like. Now we are able to use both Wifi and a Lan line so I was wondering to somewhat "double" my speed if there was any way to use both connections at the same time.
Now I know that you can have both plugged in at the same time, I guess what I'm asking is, is there a way that I could set programs to use one or the other? Or some kind of virtual desktop that is set to use the other connection or anything that would allow both be used at the same time.
Or am I just wishing for something that doesn't have any possible way to work?
-nathan
MacBook pro 2.16 C2D 2gb ram Mac OS X (10.4.8)

You can use both at the same time, but not gor Internet access if that's what you're asking.
Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
Sorry.

How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

Hello, lustige luka.
Thank you for visiting Apple Support Communities.
The Personal Hotspot feature using USB should be as simple as connecting the device to your Mac via the USB cable when Hotspot is enabled. Here is some more information regarding this feature and an article that will provide some troubleshooting steps if you are experiencing an issue.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Cheers,
Jason H.

Unable to connect to internet using wifi and lan cable after updating to windows 10

HI Team,   After updating to windows 10. I'm unable to find wifi and lan connectivity in settings->internet . I m trying all stuff to resolve the problem, But i'm unable to to do it . Please help me with this. I cannot attach screen shots over here if possible i could send screen shots if any of the e-mails id's available

Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I understand that you are having an issue with your Wi-Fi on your HP Envy M6-1125dx.  I did some research and found a great document for your called HP PCs - Troubleshooting Wireless Network and Internet (Windows 8). This document will help you troubleshoot the Wi-Fi issue.  Have you received any error messages? If you are receiving any of these errors:Internet Explorer cannot display the Web page.Work Offline: No connection to the Internet is currently available.Not connected: You are currently not connected to any networks.Here is another document called HP PCs - Resolving Broadband Internet connection problems (Windows 8).  Have you tried to Restore the BIOS? Have you uninstalled the driver in the Device Manager?If not, please do the following: 1. Uninstall the driver in Device Manager2. Restart the Notebook3. Reinstall the driver. You can use either the HP Driver's page for your specific Notebook, or you can use the HP Support Assistant.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase or that need updating. Have you tried to directly connect to the Modem/Router?  Please follow the troubleshooting steps and re-post with the results and information required from the questions above.  Thanks!

Lost the ability to connect to both WiFi and Bluetooth on my iPhone 4S. Any suggestions on how to fix this?

Lost the ability to connect to both WiFi and Bluetooth on my iPhone 4S. Any suggestions on how to fix the problem?

Have you followed http://support.apple.com/kb/TS1559 ?
Also try settings>general>reset>reset all settings
If you have followed that article and restored your phone and set it up as new and you're still having that issue you may call and explain you followed the article and are still having the problem. Most likely they will either set up a replacement for you. If they ask you to set up the one time phone support agreement, and they assist you with a restore again, they won't bill you if they end up having to repair it.

HT201699 if both wifi and apn is available,can I force use apn? thankyou.

dear friends:
if both wifi and apn is available，can I force use apn? thank you very much.

The iPhone does this automatically - has since the original iPhone and iOS 1.0 was released 5 years ago.
If you have wi-fi enabled and your iPhone is in range of an available wi-fi network the iPhone has connected with before, your iPhone will connect to that wi-fi network automatically. When leaving the range of the wi-fi network, the iPhone switches to cellular data automatically. This swich back and forth is automatic and seamless for wi-fi networks your iPhone has connected with in the past.
The iPhone will connect to the fastest internet connection available, but not automatcally for a wi-fi network your iPhone has not connected with before.

I have a BE6000 server, is it possible to me to make it do a DHCP for both voice and data? Kindly guide me through

I have a BE6000 server, is it possible for me to make it do a DHCP for both voice and data? Kindly guide me through. Thanks

CUCM can perform DHCP functions, but it's not meant to replace this functionality from a router or switch, which are the most common places to configure DHCP.
I assume you'll have at least one of those, why not configure it there??

How can I open both UDP and TCP ports

Hi,
How can i open both tcp and UDP ports for an IP in Cisco ASA?
Regards
Ejaz

Are you referring to port opening in Cisco ASA to permit certain traffic? I believe the following document should help.
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_overview.html
Adding a Standard Access List
hostname(config)# access-list access_list_name standard {deny | permit} {any | ip_address mask}
Example:
hostname(config)# access-list OSPF standard permit 192.168.1.0 255.255.255.0
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_standard.html
Adding an Extended Access List
access-list access_list_name [line line_number] [extended] {deny | permit} protocol source_address mask [operator port] dest_address mask [operator port | icmp_type] [inactive]
Example:
hostname(config)# access-list ACL_IN extended permit ip any any
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/acl_extended.html
Hope this will help.

I cannot sign into my apple id on my iphone 5, im trying to activate imessage.. im connected to both wifi and my mobile data is on- however it is still saying network connection error!? help?!

i cannot sign into my apple id on my iphone 5, im trying to activate imessage.. im connected to both wifi and my mobile data is on- however it is still saying network connection error!? help?!

Try this but you need a current email address:
http://support.apple.com/kb/HE34

I have a good connection thru both wifi and ethernet but cannot get to the internet

I have a good connection thru both wifi and ethernet but cannot get to the internet

Which model iMac do you have? Which OS system is currently installed on your comp?

Extending both wifi and ports?

I have a hub 5 and a cat5 cable to downstairs, can anyone recommend what to buy to extend both my wifi and ports (for Xbox and sky) using the Ethernet cable not power extenders?
Thanks

These links may help
http://forumhelp.dyndns.info/wireless/hh3link.html
http://www.filesaveas.com/jarviser/repeaterhubswired.html
You should be able to adapt them for the HH5.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I want to know if Ican connect a print server (to print with several wireless printers) to the new airport express given that it has wan and lan ports. Tks!

The print server that I want to connect allows me to choose among 2 usb printers and 01 serail port printer. It needs to be connected to a router through a lan port. Given that the all new airport express now come with a wan and a lan port, i want to know if I can connect this device to the airport express.

You're welcome.
Beware that while USB print servers are commonly available and inexpensive, finding one with a serial port is more of a challenge. Apple Stores in the US do not sell them. Call the iStore before going there.
If you need recommendations for obtaining a print server with a serial port, let me know.

K8N Neo4 (MS-7125) USB, Mic, S/P Out, and LAN ports all non-functional

I'm hoping someone can give me a hand with this. I'm not a novice when it comes to motherboards but this particular board is making me feel like it.
Ok, I've got a K8N-Neo4 MS-7125 model. Athlon64 3700. I have all the current drivers and ran the liveupdate to make sure.
The LAN port will light up, but the Device manager will not recognize it, nor will the LAN utility.
The board has 4 USB ports. The top two are non-functional, the bottom two work.
The S\P OUT port has never worked, nor do I know how to engage it or find it on the device manager
The microphone....this one is fun. Its like the microphone is stuck in a feedback loop. Whatever comes through my speakers, is heard on the other end by other users. I am not heard at all, although I can hear myself through my OWN speakers. Even with the mic unplugged, people still can hear my speakers. Imagine having your speakers plugged into the mic jack. The only way to kill the feedback is to actually go into the sound manager and mute the whole mic system.
I can live without the LAN and USB ports, but it would be a HUGE help if someone can help me with the mic and S\P ports!!
Thanks!!!

Ok, I'll do my best to remember everything
Athlon64 3700 939socket
XP Pro Service pack 2
Rosewill case 400watts
SonyDVDRW Drive (dual layer)
Samsung DVD drive
GEForce 7300 256DDR (PCI Express)
120GB Seagate 7200 RPM Harddrive (IDE) Partioned two drives
1x512DDR ram PC3200 400mhz
As for the flavor of the NEO4 the only other numbers I know of, is on the board it says N1996 right below the processor. Is that what you need? Its a PCB V.3 board nvidia Nforce4.
Speakers are standard cyber acoustic
Logitech Mic/Headset combo
This particular case allows for hookups for headphones and mic in the front. The case has jumpers in the back that allow you to gain access from the front (but you probably already know that). I've always used the front MIC/Headset jack, and I have a splitter in the back for the headphones and that jumper. In trying to resolve the issue, I tried every jack with the microphone (even the ones that I know are labeled as speakers). I do get my own voice through MY speakers on the front jack AND the mobo jack.
Hopefully I got you enough info!
Thanks in advance!!!

SA520 and Lan ports problem

I would like to ask for your help. I have a Cisco SA520 with the latest firmware and I am experiencing a problem with the lan ports. After a minute all 4 lan ports are dead and are not working. although when you open it they are working after a minute they are dead. What you suggest to do.
Thanks in advance Konstantinos

Good morning
Hi Konstantinos, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. You could try with a factory reset holding the reset button for 30 seconds, I recommend you unplug all the cables except the power cord, if this doesn´t work you can contact our support team here,
I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Both Wifi and 4G icons up top.

My Stratosphere sometimes shows both my Wifi and 4G icons up top when I am at home connected to my Wifi. Is this normal? It does not happen all the time. Is there a setting that I am missing? It is not using my data, but it's a bit frustrating. Please help.

Hello pdaddy,
The Stratosphere is my favorite slider phone! As a matter of fact, I bought one for my mother in law for the holidays and she loves it also! It is not out of the ordinary for smartphones to show the wifi connection and 4G/3G signal strength. This is often dependent on how strong the wifi connection is with the wireless network. If you are connected to wifi successfully then wifi does takes precedence over 4G, thus not using your data package. My apologies if the icon is frustrating you but it is shown to advise the user that 4G is available.
Thank you...
ArnettH_VZW
Follow us on Twitter @vzwsupport

DHCP on both Wifi and LAN ports?

Similar Messages

Maybe you are looking for