DHCP Option Tags are not being applied...

Hi,
About to loose my mind... basically we are working towards a small WYSE Thin Client deployment in our environment. The WYSE clients require to receive certain DHCP Option Tags to find the WCM server of which they receive their configuration from. Same
applies to the WDM Server as well. The problem is no matter what we do, our test client is not receiving the custom option tags we've defined in our DHCP server.
DHCP Servers:
vlan41
10.40.1.206
10.40.1.207
Test Client:
vlan46 - ip helpers defined on the switch
Set to receive the same ip address from the DHCP server through the reservation route.
Option Tags:
186 - WDM Server - 10.40.1.184
195 - WCM Server - 10.40.1.185
196 - WCM Path - /
I've installed Wire Shark on the test client to monitor the DHCP activity. The above custom options tags are not being pushed on to the client.
The Router, DNS Server and Domain Tags are being pushed. So it's working but also not working????!!!
Anybody with some insight to this problem?

Hi hpaul_p
In all fairness I'm about to give up... the vendor is not coming up with a solution and constantly blaming Microsoft. To further test and confirm this wasn't a network issue, I've setup a secondary test environment using a 4 port switch, a client and
a DHCP server. Same results!!! I'm really running out of time, so my work around is this: I've setup a SRV records pointing to the WCM server... in your case this would be SRV record for the WDM server. I've disabled the auto
discovery functionality of the WDM Agent, for some reason it seems to be clashing with the WCM agent. Since you will be using WDM only, don't disable auto discovery, tick the DNS SRV record from the Discovery Settings under the client agent.
I'm going to add the clients to the WDM server manually through their ip addresses so don't need auto discovery. From what I gather from the manuals the WCM searches for the repository or conifg servers in this order: 1. SRV 2.DNS (A record)
3.DHCP (Options), I bet it's the same with WDM. Though SRV and DNS methods has their limitations, if you will be using the default paths and credentials it shouldn't be a problem. This is all I have have. Steven Song I've forwarded you the
DHCP database, if you find any problems with it please let me know.

Similar Messages

Data are not being applied at destination side

Hi all,
I have implemented real time streams replication(not archive log based downstream replication).
source:9.2.0.8.0
destination:10.2.0.2.0
Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
The trc file shows this:
Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /dev1/visdb10/10.2.0
System name: Linux
Node name: wbsebdev1
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: VIS
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
*** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
*** SESSION ID:(388.16) 2008-05-29 11:39:26.957
The Alertlog file shows at the end this:
Thu May 29 11:19:06 2008
Streams APPLY A001 with pid=16, OS id=9531 stopped
Thu May 29 11:21:25 2008
Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
Thu May 29 11:39:26 2008
Streams APPLY A001 started with pid=18, OS id=14624
Streams Apply Reader started P000 with pid=20 OS id=14626
Streams Apply Server started P001 with pid=21 OS id=14628
Thu May 29 11:41:33 2008
Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
Pls help.
Thanking You,
Nitesh.

Problem solved.

Image Colour Profiles are not being applied

When I import images in to InDesign CC 2014 the embedded colour profiles are not being activated.
Therefore images are looking flat and a bit washed out on screen.
In order to apply the colour profile I have to right click on the image go down to Graphics and the colour settings and select the correct profile.
In the InDesign colour settings menu I have Colour management policies set to Preserve Embedded Profiles on RGB and Preserve Numbers (ignore linked Profiles) for CMYK. However changing these to other options makes no difference, the profile still need to be activated on each image.
I am working with RGB images that have the Adobe RGB 1998 profile embedded in them.
I cannot figure out why this is happening!??

Check your color settings.

Why ADF tags are not being renderered ?

Hi,
I am trying to create a jsp file with adf tags, but I am getting the following warnings in the server and as a result the tags are not renderered .
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for HtmlHtml[UIXFacesBeanImpl, id=_id0], rendererType = oracle.adf.Html
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for HtmlHtml[UIXFacesBeanImpl, id=_id0], rendererType = oracle.adf.Html
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for HtmlHead[UIXFacesBeanImpl, id=_id1], rendererType = oracle.adf.Head
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for HtmlHead[UIXFacesBeanImpl, id=_id1], rendererType = oracle.adf.Head
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for HtmlBody[UIXFacesBeanImpl, id=_id2], rendererType = oracle.adf.Body
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for HtmlBody[UIXFacesBeanImpl, id=_id2], rendererType = oracle.adf.Body
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreForm[FormFacesBean, id=_id3], rendererType = oracle.adf.Form
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreForm[FormFacesBean, id=_id3], rendererType = oracle.adf.Form
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreMessages[MessagesFacesBean, id=_id4], rendererType = oracle.adf.Messages
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreMessages[MessagesFacesBean, id=_id4], rendererType = oracle.adf.Messages
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CorePanelGroup[UIXFacesBeanImpl, id=_id5], rendererType = oracle.adf.Group
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CorePanelGroup[UIXFacesBeanImpl, id=_id5], rendererType = oracle.adf.Group
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreCommandLink[CommandLinkFacesBean, id=_id7], rendererType = oracle.adf.Link
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreCommandLink[CommandLinkFacesBean, id=_id7], rendererType = oracle.adf.Link
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreCommandLink[CommandLinkFacesBean, id=_id8], rendererType = oracle.adf.Link
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreCommandLink[CommandLinkFacesBean, id=_id8], rendererType = oracle.adf.Link
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreOutputFormatted[UIXFacesBeanImpl, id=_id9], rendererType = oracle.adf.Formatted
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreOutputFormatted[UIXFacesBeanImpl, id=_id9], rendererType = oracle.adf.Formatted
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreTable[UIXFacesBeanImpl, id=_id10], rendererType = oracle.adf.Table
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreTable[UIXFacesBeanImpl, id=_id25], rendererType = oracle.adf.Table
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreOutputFormatted[UIXFacesBeanImpl, id=_id36], rendererType = oracle.adf.Formatted
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreOutputFormatted[UIXFacesBeanImpl, id=_id36], rendererType = oracle.adf.Formatted
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreTable[UIXFacesBeanImpl, id=_id37], rendererType = oracle.adf.Table
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreOutputFormatted[UIXFacesBeanImpl, id=_id45], rendererType = oracle.adf.Formatted
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreOutputFormatted[UIXFacesBeanImpl, id=_id45], rendererType = oracle.adf.Formatted
Jun 3, 2008 9:02:17 AM oracle.adf.view.faces.component.UIXComponentBase _getRendererImpl
WARNING: Could not find renderer for CoreTable[UIXFacesBeanImpl, id=_id46], rendererType = oracle.adf.Table
Any help will be appreciated,
Thanks.

I Found the problem :)
The faces-config.xml file was missing the following:
<application>
<default-render-kit-id>oracle.adf.core</default-render-kit-id>
</application>

Podcast explicit tags are not being recognized

I'm using Squarespace as my website host, and have followed their instructions to insert the iTunes Explicit tag into our feed before submitting to the iTunes store. Unfortunately, after extensive testing with Squarespace support, the tags are being read properly in the XML feed, but each time I attempt to submit via iTunes, the Explicit tag is not recognized. Any help would be greatly appreciated.
Here is a copy of the XML output (provided by Squarespace support)
https://img.skitch.com/20120328-t5g175qa2mf3wr3t86ay7rtmwr.png

1. Try resetting your SMC.
Resetting the System Management Controller >>
2. Your laser pickup could be dirty. You can buy a cleaner disc for that.
3. It may be the media you're using, but it nothing is recognized, it may be hardware related.
4. Run your hardware tester.
5. Is your optical drive being recognized in your System Profiler?
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

Photo Geo tags are not being used by Places

I have been importing photos into iPhoto with valid geo tags and none of the photos are being shown on the Places map.
When I initially starting using iPhoto I imported some pictures from my iPhone and realised that the pictures were identified on the Places maps automatically, since I have added photos and manually edited the location information directly in Places.
If I import pictures from my iPhone they are not entered into Places and if you check all the location information is blank, if you look at the extended information you can see all the correct GPS information...
I'm confused..

in your iPhoto preferences is look up places set to "Automatically"? The default is "never" and it must be changed to "automatically" to work.
LN

Start/End Tags are not being accepted by parse if null.

The is my database version:
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Solaris: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionWe have a new application that pretty much generates the xml tags. The sending system uses two tags even when a NULL value is being sent. However the Oracle parser does not like it. We get this error:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00231: invalid character 47 ('/') found in a Name or Nmtoken
Error at line 1When I receive a list of parameters as a clob, I then cast it as xml for processing. When I use a tag like <phase/>, the xml parser accepts it. However, when I put into the format being sent <phase></phase> to signify a NULL value. The following is the code snippet that generates the error.
vXmlDoc := XMLTYPE(pSearchParams_Tx);My question is there any way to allow the xml parser to accept the default format that is being sent in? Perhaps is the some sort of pre-processing that would allow the sent in format to be used? Thank you.

I'm not sure I follow fully. I don't have 11.2.0.2 to test against, but I do not encounter any issue with this simple example
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.3.0
SQL> set serveroutput on;
SQL>
SQL> declare
2 pSearchParams_Tx CLOB;
3 vXmlDoc XMLTYPE;
4 begin
5 pSearchParams_Tx := '<phase/>';
6 vXmlDoc := XMLTYPE(pSearchParams_Tx);
7 dbms_output.put_line('Done 1');
8 pSearchParams_Tx := '<phase></phase>';
9 vXmlDoc := XMLTYPE(pSearchParams_Tx);
10 dbms_output.put_line('Done 2');
11 end;
12 /
Done 1
Done 2
PL/SQL procedure successfully completed I get the same thing on 11.1.0.6 as well.
Do you have a code example that demonstrates the error?

Rules in Mail not being applied after Mavericks update

Hi everyone, I know there are a lot of threads already discussing similar issues, but so far I've been unable to find one that helps resolve my particular issue. Ever since upgrading to Mavericks my rules are not being applied in Mail. I will give you a screenshot of one of my rules:
I have about five rules that follow the same pattern: search for particular string in the FROM field and mark it with a color if the string is present. These rules all worked fine in Snow Leopard. All of my rules are still present after the upgrade and all checked as active. When I "select all" messages in my inbox and press Option-Cmd-L the rules are applied properly. However, the rules are not applying themselves when new mail comes in. As far as I can tell this does not have anything to do with the mail not being recognizes “as a new message” like, for example, because the mail was already read on my phone. It happens even if my other devices are offline and the only thing I am using to check mail is my laptop.
I am using a MacBook Pro 2.3 GHz Intel Core Duo with OS X 10.9.1, in case that matters.
Thanks for any advice!

I think I've found at least a partial solution to the Mail - Rules Don't Work problem:
In "Mail" go to the menu Mailbox and click on Rebuild.
If you have a lot of stuff, this will take several minutes to finish.
I also reviewed all my rules and made a few minor changes.
Mixed results: I found that running "Apply Rules" didn't work on email already received; but new mail did. I don't quite understand that, but I call it a partial success.

ASA-5585-X 8.4(6)5 Idle connections are not being removed according to timeout settings

Hi,
Just a quick question if anybody has run into a bug where the ASAs "timeout" settings are not being applied to idle connections.
It seems that our ASA running the software level 8.4(6)5 is not tearing down connections. This mainly seems to be a problem in one Security Context where there are around 300k UDP connections (related to VOIP phones) that are not being torn down. Idle timers on the connections are going as far as 700 hours. Common to all the UDP connections is also the fact that only 19 Bytes of data has been transmitted on the connection built on the firewall. I am not sure what the purpose of these UDP Connections is as both the source and destination port is a random high port.
I was not able find any Bug ID which description would match the situation I am seeing. I did not see anything in the release notes of 8.4(7) or its interrim release either that would list thing kind of bug.
- Jouni

Hi Jouni,
This caveat seems to be the closest match as 8.4.6 is the affected ASA code.
CSCuh13899
Symptoms:-
Some connection may not removed even after reaching idle timeout.
https://tools.cisco.com/bugsearch/bug/CSCuh13899/?reffering_site=dumpcr
You can upgrade to the next stable ASA code as suggested in the referred document.
HTH
Regards,
Dinesh Moudgil
P.S. Please rate helpful posts.

Security constraints not being applied after using custom login module

I am using form based authentication and I applied the custom login module - DBProcLoginModule to work with the embedded OC4J (JDeveloper 10.1.3.2). I have specified two security contraints in web.xml. The authentication is working correctly, however the security contraints are not being applied. All users are able to access all url resources. The security constraints were working properly before applying the custom login module. Pls help.
Leena

Hi,
if "All users are able to access all url resources" then this indicates that the RL isn't properly protected. If the authorization would fail then noone would have access and you would see error code 401
Make sure the role names in web.xml are the same as added by the LoginModule. Also make sure you set the dynamic.role property and the custom security provider property in the orion-application.xml
<jazn provider="XML">
<property name="custom.loginmodule.provider" value="true"/>
<property name="role.mapping.dynamic" value="true"/>
</jazn>
Note that the above is not required (because done automatically) if the custom LoginModule configuration is deployed through the orion-application.xml file
Frank

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options.

My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options. Can anyone tell me why?

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

Cookies are not being cleared when I close the browser although the option is set. Any suggestions?

Under Options; Privacy I have Clear history when Firefox closes ticked and within the Settings for Clearing History I have Cookies ticked. Cookies are not being cleared when I close the browser. Windows 7, SP1 x64

If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies

My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

Hello transcend94,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
iTunes: Understanding iTunes Media Organization
http://support.apple.com/kb/ht3847
Avoid using different versions of iTunes, or you may be unable to locate content, or may import or transfer content to the wrong location.
Best of luck,
Mario

Tiny Troopers 2 (iPhone and iPad Game) saves are not being synced to both devices. No option is given to load the iPhone save onto my iPad. Why is this?

Tiny Troopers 2 (iPhone and iPad Game) saves are not being synced to both devices. No option is given to load the iPhone save onto my iPad. Why is this? Can anyone explain or help me with this problem?

SkyzThaLimit wrote:
Normally it gives the option via iCloud sync (infinity blade, tower defense)
It is an option that the app developer has to decide to offer.

DHCP Option Tags are not being applied...

Similar Messages

Maybe you are looking for