DHCP ping coming from node, not cluster IP

I know this is a long shot, but..
Netware 6.5sp8 clustered dhcp service is properly loaded and bound to the
cluster IP, but it appears that the pings (to check if IP's are already
used) are coming from the cluster node IP rather than the clustered DHCP IP.
Any ideas why this would be?

I think maybe the Netware attribute is the DNIP:ServerIPAddress, which
appears to be set when dhcpsrvr is loaded by the cluster script. The
problem is that, even though the cluster script is specifying the cluster
IP, the DNIP:ServerIPAddress is being recorded as the node address, ugh.
<[email protected]> wrote in message
news:6DMOo.8281$[email protected]..
>I think what I may need is the dhcp-server-identifier option discussed
>here:
> http://forums.novell.com/novell-prod...ondary-ip.html
>
> But I'm not sure if it's even possible to add this option to a Netware
> dhcp server, to test it.
>
> <[email protected]> wrote in message
> news:guMOo.8274$[email protected]..
>>I know this is a long shot, but..
>> Netware 6.5sp8 clustered dhcp service is properly loaded and bound to the
>> cluster IP, but it appears that the pings (to check if IP's are already
>> used) are coming from the cluster node IP rather than the clustered DHCP
>> IP. Any ideas why this would be?
>>
>
>

Similar Messages

Guestname coming from session, not from parameter, and it's URL-encoded. Need it decoded.

We have a hosted account for Adobe Connect. When users want to enter a room, they go to a URL like this:
http://connectpro12345678.na5.acrobat.com/rereview/?launcher=false&guestName=John%20Smith
This drops them into the meeting room, but the name is listed under Participants as
John%20Smith
rather than the desired John Smith.
I've determined that the URL-encoded name is coming from the session, because when I deleted the BREEZESESSION cookie and hit the meeting room directly, using a URL like:
https://connectpro12345678.adobeconnect.com/_a963369417/rereview/?launcher=false&guestName =Michael%20Van%20Kleeck
the guest name is displayed appropriately.
How can I force Connect to either decode the guestname or to use the guestname from the parameter, rather than the session?
Thanks!
-Michael

You shouldn't be using the naX.acrobat.com URLs. These URLs are redirecting to the new adobeconnect.com URLs, which may be where you are seeing the issues. You shouldn't need to use your account ID (_a963369417) so your links should look like: http://connectpro12345678.adobeconnect.com/review/?launcher=false&guestName=John%20Smith

Files coming from photoshop not showing up in Lightroom

I suspect I have some setting goofed up, but I looked at preferences, and don't see which one............
In lightroom 5.3, I have some raw (.nef) images. I assign them a keyword. I open the set of images with that keyword (so, they all have the keyword). Go into Develop, fiddle, then do an "edit in", and go to PS CC. Make changes, then do a Save As, and save a .psd back to the same folder......
In the past, MY RECOLLECTION is that the .psd I just saved, would be stacked with the original .NEF, AND would show up in the group with the keyword. With the current settings, everything works fine EXCEPT the .psd doesn't show up in the keyword group. When I get back to Lightroom, still in Develop, there is 'NO PHOTO SELECTED". If I go back to Library it is not visible in the keyword group. If I EXIT from the keyword set, and display all the images, I can now see the .psd AND it has the keyword set, but it doesn't show up in the keyword group until I exit from the group, go back to displaying all the images, then go back INTO the keyword group.
And yes, I have "stack with original" set in the external editor preferences.
Is this normal behavior in 5.3, or do I have something set wrong? 'Cause it's really slowing things down having to constantly go back to library, exit the keyword group, and on and on...

Hi Rikk... Just did a test.........
Opened the keyword group of files. Grabbed a .nef. Went into PSCC. Made some changes. Did a "Save As", saved a .psd and the file did NOT appear in the set of files in LR. Opened the entire folder of files, and the .psd is there, so it got imported back into LR. Went back into the keyword set and the .psd does not display. The .psd HAS the keyword on it. Opened the folder, removed the keyword and added it again to the .psd. Went back into the keyword set and the .psd is there...........................................
THEN, I grabbed another .nef in the same keyword group, went to PSCC, made changes, and did a "Save As" as a .TIF. Went back to LR and the .tif is displayed in the group just as it always has before.
Back to PSCC and saved the same file as a .psd. Back to LR and the .psd and .tif BOTH appear in the group.
Grabbed a THIRD .nef and went through the same process, did a "Save As" for the .psd and THAT .psd NOW appears in the group just fine.
I have NO idea WHY it's working, but it didn't work prior to creating a tif, and it does work after creating a tif. As near as I can tell, that's the only change since yesterday when it didn't work, and even after closing and reopening LR this morning, it still didn't work. I'm reluctant to use the "since B followed A, A caused B", but it didn't work, it now works after doing a "Save As with a .tif". Bizarre...
Mollysnoot - I don't think so. for the last (way too many) years, I've ALWAYS used "Save As" because I append the word "edit" on any file that's gone through the full processing in PS. It's always worked fine. The file created does get imported, and has the characteristics of the original. If the original had a green label and 3 stars and was picked and had a bunch of keywords associated, the psd also had a green label, 3 stars, was picked, and had all the keywords. And it showed up automatically in the group of files displayed by on of those keywords...

[OT?][HELP] Managed Server dropped from Group (not Cluster)

WLS61SP2 on Solaris 8 (Sun), non-clustered server group, one Managed Server
suddenly gets no longer visible from Administration Server (on a different
machine), disappears from console (no status shown) but keeps on running
fine.
Problem seems to happen a few times a day, generally long (hours) after
Server Group .wlnotdelete cleanup and restart, seemingly unrelated to server
load, does not happen to "twin brother" server on yet another machine.
Server Group works as JSP engine for Vignette, unreachable server means
Vignette's dev environment can no longer save any modified JSP to (its own
Application deployed on) the server group (through deploy.refresh via the
admin server) and hangs.
Doesn't seem Vignette's fault yet, as it never happened in another very
similar architecture.
Surely not NodeManager's fault, since the Server Group does NOT use
NodeManager (certificates involved, bureaucracy rulez!).
Can anyone help please:
- any known issue?
- any way to have the server re-join the group, beside restarting?
With lots of TYA (and apologies for a bit of X-posting)
Paola R.

Please do not cross-post.
"Paola R." wrote:
WLS61SP2 on Solaris 8 (Sun), non-clustered server group, one Managed Server
suddenly gets no longer visible from Administration Server (on a different
machine), disappears from console (no status shown) but keeps on running
fine.
Problem seems to happen a few times a day, generally long (hours) after
Server Group .wlnotdelete cleanup and restart, seemingly unrelated to server
load, does not happen to "twin brother" server on yet another machine.
Server Group works as JSP engine for Vignette, unreachable server means
Vignette's dev environment can no longer save any modified JSP to (its own
Application deployed on) the server group (through deploy.refresh via the
admin server) and hangs.
Doesn't seem Vignette's fault yet, as it never happened in another very
similar architecture.
Surely not NodeManager's fault, since the Server Group does NOT use
NodeManager (certificates involved, bureaucracy rulez!).
Can anyone help please:
- any known issue?
- any way to have the server re-join the group, beside restarting?
With lots of TYA (and apologies for a bit of X-posting)
Paola R.--
Rajesh Mirchandani
Developer Relations Engineer
BEA Support

Image Coming from URLRequest Not Displaying?

Hi,
I have a main app here with a subclass that is supposed to "send images" based on the "parameters" that sends to a HTTPService.
However, even though the url seems to be generating correctly, I could not see the image. Since my PHP is working fine with the url as shown in the trace statements from my app, I am assuming that there has to be something else that I am missing here.
Below is the code that generates the image, is there something here I am missing?
package map
     import colorize.*;
     import com.zavoo.svg.*;
     import flash.display.Sprite;
     import flash.events.Event;
     import flash.net.URLLoader;
     import flash.net.URLRequest;
     import flash.net.URLVariables;
     import mx.containers.Canvas;
     import mx.core.UIComponent;
    public class SvgMap extends UIComponent {
        public var canvas:Sprite;
        [Embed(source="USA_Counties_with_FIPS_and_names.svg")]
        public var usaMap:Class;
        public var paths:SvgPaths;
        private var patient_from:Array;
        private var drive_time:Array;
        private var drive_distance:Array;
        private var college:Array;
        private var high_school:Array;
        private var income:Array;
        private var population:Array;
        private var countyName:XMLList;
        private var stateColors:Array;
        private var horizontal_bar:Canvas;
    public function SvgMap():void {
                canvas = new usaMap();
                canvas.width = 650;
                canvas.height = 500;
                addChild(canvas);
                trace("Canvas Parent: " + canvas.parent);
    public function passBox(passedBox:Canvas):void{
        horizontal_bar = passedBox;
     public function setParameters(passedArray:Array,passedArray7:Array):void {
            from = passedArray;
            stateColors= passedArray7;
            changeMap(from,stateColors);
        public function changeMap(passedArray:Array,passedArray7:Array):void{
        removeChild(this.canvas);
        canvas = new Sprite();
        canvas.width = 600;
        canvas.height = 500;
        addChild(canvas);
        var from_string:String = from.join("-");
        var state_colors_string:String = stateColors.join("-");
        var loader:URLLoader = new URLLoader();
        var url:String = "http://tdc-queuing/test/generic.php?from=" + from_string + "&state_colors=" + state_colors_string;
        var variables:URLVariables = new URLVariables();
        variables.patient_from= patient_from_string;
        variables.state_colors = state_colors_string;
        var encode:String= encodeURI(url);
        var pattern:RegExp = /#/g;
        var decode:String = encode.replace(pattern,"%23");
        var request:URLRequest = new URLRequest(decode);
        request.method = "GET";
        loader.load(request);
        loader.addEventListener(Event.COMPLETE, onLoadComplete);
        public function onLoadComplete(event:Event):void {
                var loader:URLLoader = URLLoader(event.target);
                paths = new SvgPaths(loader.data);      //the canvas exists
                paths.drawToGraphics(this.canvas.graphics, 2, 10, 10);
Thanks for your help. Anything is appreciated.
Alice

Hi,
For testing purposes, here is the package:
package map
     import colorize.*;
     import com.zavoo.svg.*;
     import flash.display.Sprite;
     import flash.events.Event;
     import flash.net.URLLoader;
     import flash.net.URLRequest;
     import flash.net.URLVariables;
     import mx.containers.Canvas;
     import mx.core.UIComponent;
    public class SvgMap extends UIComponent {
        public var canvas:Sprite;
        [Embed(source="USA_Counties_with_FIPS_and_names.svg")]
        public var usaMap:Class;
        public var paths:SvgPaths;
        private var from:Array;
        private var stateColors:Array;
        private var horizontal_bar:Canvas;
    public function SvgMap():void {
                canvas = new usaMap();
                canvas.width = 650;
                canvas.height = 500;
                addChild(canvas);
                trace("Canvas Parent: " + canvas.parent);
    public function passBox(passedBox:Canvas):void{
        horizontal_bar = passedBox;
     public function setParameters(passedArray:Array,passedArray7:Array):void {
            from = passedArray;
            stateColors= passedArray7;
            changeMap(from,stateColors);
        public function changeMap(passedArray:Array,passedArray7:Array):void{
        removeChild(this.canvas);
        canvas = new Sprite();
        canvas.width = 600;
        canvas.height = 500;
        addChild(canvas);
        var from_string:String = from.join("-");
        var state_colors_string:String = stateColors.join("-");
        var loader:URLLoader = new URLLoader();
        var url:String = "http://localhost/test/generic.php?from=" + from_string + "&state_colors=" + state_colors_string;
        var variables:URLVariables = new URLVariables();
        variables.from= from_string;
        variables.state_colors = state_colors_string;
        var encode:String= encodeURI(url);
        var pattern:RegExp = /#/g;
        var decode:String = encode.replace(pattern,"%23");
        var request:URLRequest = new URLRequest(decode);
        request.method = "GET";
        loader.load(request);
        loader.addEventListener(Event.COMPLETE, onLoadComplete);
        public function onLoadComplete(event:Event):void {
                var loader:URLLoader = URLLoader(event.target);
                paths = new SvgPaths(loader.data);      //the canvas exists
                paths.drawToGraphics(this.canvas.graphics, 2, 10, 10);
And, this is the PHP:
<?php
header("Content-type: image/svg+xml"); //Outputting an SVG
$from = $_GET['from'];
$state_colors= $_GET['state_colors'];
$from = explode("-", $from);
$state_colors= explode("-", $state_colors);
#Load the Map
$ourFileName= "USA_Counties_with_FIPS_and_names.svg";
$fh = fopen($ourFileName, "r") or die("Can't open file");
$contents = fread($fh,filesize($ourFileName));
$lines2= file($ourFileName);
foreach ($lines2 as $line_num => $line2) {
$style_line_num = $line_num+3;
$line2 = trim($line2);
      if(preg_match("/^style/",$line2)) {
       $rest = substr($line2,0,-1);
       for ($j=$line_num;$j<=$style_line_num;$j++){
         if(preg_match("/inkscape:label/",$lines2[$j])) {
            $location = explode("=",$lines2[$j]);
            $location2 = substr($location[1],1,-6);
            if(in_array($location2, $from)) {
             $key= array_search($location2,$from); //Find out the position of the index in the array
             $colors_style = ";fill:" . $state_colors[$key]; //Use the index from array_search to apply to the color index
             $rest2 = substr($line2,0,-1). $colors_style . "\"";
             echo $rest2 . "\n";
            else echo $line2 . "\n";
         } //end preg_match inkscape
     } //end for loop
   } //If preg_match style
     else echo $line2 . "\n"; //else if preg_match style
} //end for each
fclose($fh);
?>
Thanks for your help.

IMessage on iPad is coming from email not number after getting new phone

Since getting a new iPhone my iPad is not showing a phone number I can send a iMessage from only an email, how can I sync it back up to my phone or add in a phone number

It may be possible if you have an iPhone with an iPhone number and then are able to add that in your iPad.
But I don't see how.
For the rest of us without an iPhone, it doesn't appear to be possible to put a regular phone number in our iPads.
It will not let me add a phone number of any kind.
iOS 7, new iPad Mini and iPad 3rd generation. Not possible.
Do you have any screen shots from your iPad with a phone number in it ?
That would help.

Using VMware Not ping between two nodes.

Dear All,
I am installing the Linux and Installing the RAC using VMWare. Shared disk and all things were done. But not ping between the two nodes.
Regards
Prasannavenkatesh.K

I have previously made entry in /etc/hosts file.
now i am able to ping all the nodes no problem
thnks
now i have a problem in installing oracle crs in RAC1
I login to RAC1 as the oracle user and start the Oracle CRS installer
and while the specify the cluster configuration screen, i came across the error
"The installer has detected the existence of 10g oracle
clusterware on the remote node rac2 however, 10g oracle doesn't exist in the local node If
u wish to upgrade and existing 10g release 2 ,then u must start the installer on a mode "
thnks in anticipation
prassana

How to read data from a CLUSTER STRUCTURE not cluster table.

Hi,
how to read data from a CLUSTER STRUCTURE not cluster table.
regards,
Usha.

Hello,
A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
Regards,
Mansi.

When I send a text message it shows up as coming from my email address not my phone, can i change this

when I send a text message it shows up as coming from my email address not my phone, can i change this

another way to change it is :
go to settings -> phone -> my number (iput your phone number)
and then do what razmee209 said,
after you change it, your phone number will authenticate with the operator that you use,
I hope this could help you,

When I send a text to another phone, it shows up on the other phone as coming from email address and not from phone number.

I just came over from Sprint 4 days ago and had my number ported over. When I send a text to another number, it shows up on the other phone as coming from email address and not my phone number. For example, if the recipient of the text has me in the contacts as "Tom", the text comes to them displaying my email address instead of "Tom".

cfm007,
Welcome to our family. We want you to be able to enjoy all the services we provide and we definitely need to address this. Do you receive/make calls without problems? Are you able to receive messages with your contacts' number? Are you using iMessages? If so, go to Settings>Messages>Send&Receive>only your phone number should be enabled.
AdaS_VZW
Follow us on Twitter at @VZWSupport

My macbook pro is probably only 2 months old and there is a buzzing/grinding noise coming from the left side of the laptop every time I open it. It may buzz 5 times in a span of 30 seconds then not make the noise the remaining time that it is open.

My macbook pro is probably only 2 months old and there is a buzzing/grinding noise coming from the left side of the laptop every time I open it. It may buzz 5 times in a span of 30 seconds then not make the noise the remaining time that it is open. I have read that it may have to do with my fan or HD. I am under apple care for a good amount of time but am wondering if this is a mjor issue. I would not be able to get to an apple care center in the near future due to being at school. Should I be worried or will it last by the time I am home in 2 months.

Sounds like the disk in your MBP is accessing data on wake up
If you are still concerned you can take it into the Apple Store where they can hear it to be sure
Allan

Clients not receiving DHCP IP address from HREAP centrally Switched Guest SSID

Hi All,
I am facing a problem in a newly deployed branch site where the Clients are not receiving DHCP IP address from a centrally switched Guest SSID. I see the client status is associated but the policy manager state is in DHCP_REQD.
The dhcp pool is configured on the controller itself. The local guest clients are able to get DHCP and all works fine, the issue is only with the clients in the remote site. The Hreap APs are in connected mode. Could you please suggest what could be the problem. Below is the out of the debug client.
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Adding mobile on LWAPP AP 3c:ce:73:6d:37:00(1)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Reassociation received from mobile on AP 3c:ce:73:6d:37:00
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'Guest-ACL' (ACL ID 0) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific IPv6 override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying IPv6 Interface Policy for station 10:40:f3:91:7e:24 - vlan 81, interface id 13, interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 STA - rates (8): 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 AUTHCHECK (2) Change state to L2AUTHCOMPLETE (4) last state L2AUTHCOMPLETE (4)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 3c:ce:73:6d:37:00 vapId 17 apVapId 1
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state DHCP_REQD (7)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 apfMsAssoStateInc
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfPemAddUser2 (apf_policy.c:222) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Idle to Associated
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 49) in 28800 seconds
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sending Assoc Response to station on BSSID 3c:ce:73:6d:37:00 (status 0) ApVapId 1 Slot 1
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfProcessAssocReq (apf_80211.c:4672) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Associated
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 4183, Adding TMP rule
*apfReceiveTask: May 24 11:35:53.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
type = Airespace AP - Learn IP address
on AP 3c:ce:73:6d:37:00, slot 1, interface = 13, QOS = 3
ACL Id = 255, Jumbo F
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 7006 IPv6 Vlan = 81, IPv6 intf id = 13
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (ACL ID 255)
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sent an XID frame
*apfMsConnTask_3: May 24 13:26:49.401: 10:40:f3:91:7e:24 Updating AID for REAP AP Client 3c:ce:73:6d:37:00 - AID ===> 1
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 12) in 10 seconds
*osapiBsnTimer: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
*apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:4897) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Disassociated
*apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*osapiBsnTimer: May 24 13:29:09.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Sent Deauthenticate to mobile on BSSID 3c:ce:73:6d:37:00 slot 1(caller apf_ms.c:4981)
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsAssoStateDec
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:5018) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Disassociated to Idle
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [3c:ce:73:6d:37:00]
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Deleting mobile on AP 3c:ce:73:6d:37:00(1)
*pemReceiveTask: May 24 13:29:09.317: 10:40:f3:91:7e:24 0.0.0.0 Removed NPU entry.

#does the client at the remote site roams between AP that connects to different WLC?
#type 9 is not good.
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
#Does your dhcp server getting hits.
#Also, get debug dhcp message & packet.
#Dhcp server is not responding.
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.

SD billing Accounting document Profit center not coming from billing doc

Hi Expert,
    I have stuck with the accounting doc entries. Issue is that accounting document should have
    the same profit center as billing document. Actually i have created profit center for my each of
    my divisions and want the same profit center whenever that particular division is selected. But it
   is not working.
    I have tried with substitution method also by t-codes 0KEL and 0KEM. It works correctly till
   billing document means division wise profit center is coming in order,delivery , and billing but
   when we check accounting document,Profit center doc. Controlling Document and Profitab.
   Analysis in Delivery and Bill it is coming from what i have maintained in material master.
   But it should come from what is in the delivery and billing document.
    Please share your ideas.
   Thanks & Regards

Hi SAP Consultant
I would not agree with the first reply above.
When you define a substitution in 0KEL and 0KES, it is intended to overwrite the PC from Material Master. It is a wrong notion that this Substitution will only impact FI, and not CO / COPA
1. Are you able to see the over-written PC in Sales Order? (I think YES)
2. Are you able to see the over-written PC in Billing doc? (I think YES)
3. If in FI doc you are not able to see that, then see where is the problem. Probable reasons would be a Substitution written in OBBH, You are having a CO Object in the line item, a user exit written in the exit SDVFX008
Ask your ABAP to check on these lines, if 1 and 2 is YES
Br, Ajay M

How to remove a node from 4 node sun cluster 3.1

Dear All,
We are having a four nodes in a cluster.
Could any one please guide me, how to remove a single node from a 4 node cluster.
what are the procedure and step's I have to follow.
Thanks in advance.
Veera.

Google is pretty good at finding the right pages in our docs quickly. I tried >how to remove a node Solaris Cluster< and it came up with
http://docs.sun.com/app/docs/doc/819-2971/gcfso?a=view
Tim
---

TS3276 Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have

Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.

Brightbleu wrote:
Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
Winmail.data are not usable files. They just preserve RTF within the message.
http://support.microsoft.com/kb/278061
Cheers
Pete

DHCP ping coming from node, not cluster IP

Similar Messages

Maybe you are looking for