DHCP Server & DHCP Relay on the same box

Hi,
I was wondering if there was any tricky way to have both the DHCP server and DHCP Relay present at the same time and have router use Relay option before local DHCP pool?
I must say that both DHCP Pool and "ip helper address" command serve the same interface. By default, router will look for locally available pools and send DHCPOFFER by itself without relaying the DHCPDISCOVER to a remote DHCP server, so incoming interface takes precedence over DHCP-relay option and I was wondering if you could tweak that...
Thanks,
David

Well.. as far as I know what you are asking is not possible... :(
Did it help?

Similar Messages

  • Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

    I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished.  For the moment I just need some "high level" guidance, little details can be worked out once I know
    which direction I will go.  I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time.  DFS can stay installed for maybe
    future purposes but clearly I wouldn't need the DFS Replication with only one machine.
    Here's a few details of the environment....
    1.  DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present.  But likely they will be gone and the DFL elevated before I start on the File Server project
    2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server.  Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
    and maybe the same IP if not too much trouble.  This way the existing shortcut would continue to work with the new 2012R2 File Server.  The UNC path represented in that shortcut is also configured into one or more of our major business applications,
    futher emphasizing the need to keep the UNC path the same throughout the process.
    3. The facility runs 24/7/365 but is "light" on weekends.  The political environment is such that there is little to no tolerance for any down time at all.
    4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
    Thanks for any suggestions.
    Phillip Windell

    Hi Sharon,
    I've done some more reading and have a few new ideas to run past you....
    Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
    to flip over to the new server.  DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
    the old server to 2003R2 first.  As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
    Thanks for the reg info on the Shares.  I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job.  I'll probably export that Key as a
    safety move whether I use it or not.
    Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
    1. Remove the DFS Replication Object (optionally remove DFS Services completely)
    2. Rename the old File Server to something else and set it to DHCP
    3. Rename the new File Server to the name I want to use and give it the IP the old server had.
    How does that sound?
    Phillip Windell

  • Can E-RECRUITING share the same box of ECC?

    I always install E-RECRUITING on a dedicated server as an ABAP application. Then connect to its backend ECC.
    Just curious, can I  install  E-RECRUITING on the same box where its backend ECC system is installed? ECC and E-RECRUITING will have
    different SIDs but co-exist in one Oracle MCOD DB.
    Further more,  can E-RECRUITING and its backend ECC belong to the same SID but on different clients?
    Thanks for help.

    Yes and yes. The first scenario is comparable to I2-A and the second one to I2-B. See the application help for details.

  • ABAP and JAVA Stack in the same box

    Hi all,
    I have installed Java Sneak preview first and after I installed ABAP Sneak in the same box.
    Everything is working fine but I noticed a little detail.
    My jcontrol.exe service disapeared from SAP Management Console.
    I mean before installed ABAP Stack my MMC had 2 divisions in my J2E instance:
    server 1 with 2 Process msg_server.exe and enserver.exe
    server 0 with 2 Process jcontrol.exe and igswd.exe
    After installed ABAP Stack, my server 0 became part of NSP Instance and jcontrol process is not displayed anymore anywhere.
    Instead I see now msg_server.exe and disp+work.exe and igswd.exe that of course are Process of the ABAP system.
    Does anyone have a nice explanation for this?
    Regards,
    Mauricio

    Hi mauricio,
    I was installing Netweaver sp15 both Java and ABAP version on one PC. But it seems they are working.
    Can you please tell the procedures to follow, to have good installation?
    If I load java version first and then ABAP i get error at step 11.
    Did you parttition the drive in to 2 or you installed on the same partition?
    Your help will be greatly apprecieated.
    Thanks

  • Dev and Qa in the same box

    Hi All,
    If I have the DEV and QA in the same box and the sid’ s being EXD and EXT respectively pointing to the same technical system. Should we assign the role of “Integration server” to both the business systems or EXD should be integration server and EXT being the application system?? Hows it work for a single SLD for Dev and QA?

    Teresa,
    Adding to stefan, in your SLD, you create Transport Groups and then assign your Business System to the Correct Transport Groups ( when you assign a Business System to an Integration Server ,  it is added to the Transport Group to which the Integration Server belongs ) and then you assign the Transport Targets to the Source and Target business systems.
    note : When migrating objects from one environment to another, all Source Businss systems should belong to the same transport group.
    Regards,
    Bhavesh

  • OEM 12c and OVM on the same box?

    Hi Guys and Girls!
    Thank you in advance for your support!
    Could you please share you experience, best practices and gotchas with installing OEM 12c and OVM on the same OL 5x box?
    We would like to install OEM 12 R2 on a OL57 server with an existing production (Oracle DB SE 11.2.0.3.0) Oracle VM Manager 3.1.1.625 installation.
    Some questions:
    1- Does Oracle support OEM and OVM on the same server?
    2- If Oracle VM Manager and the SE DB are already installed on an OL 57 server in /u01/app/oracle/product, can OEM 12c R2 be installed into /u01 as well, or should we use a different directoty, i.e. /u02?
    3- Will the OEM 12c installation program be able to use the same DB as Oracle VM Manager, i.e., its just creates the OEM DB schema and goes on its mary way without harming the Oracle VM Manager DB schema?
    Thank you,
    Roddy

    Alessandro,
    Thank you for your reply!
    The irony with my OEM and OVM on the same box question is that the Oracle Sales & Support teams as well as public Marketecture has been recommending collocating OEM & OVM!
    I agree with you 100% about resource consumption, and considering how often we must restore/reset Oracle VM Manager I am curious how supportable an OEM & OVM install is on the same box. 99% of my customers are not interested in supporting MySQL, i.e. the DBAs know Oracle not MySQL. As long as Oracle VM Manager resets (DB deletes) and UUID restores (uninstalls and re-installs)  will not damage OEM its all good.
    Thanks again for your support!
    Roddy

  • Developing for BizTalk 2009 and BizTalk 2013 on the same box

    I currently have Visual Studio 2008 installed and setup on my local machine for doing BizTalk 2009 development.  We are migrating to BTS 2013 soon. 
    I also have Visual Studio 2013 installed (but no BizTalk 2013 components installed).  Will I be able to develop for both versions of BizTalk on the same box?
    Has anyone successfully done this?
    My machine is Windows 7 Professional, 64 bit.  And I have also installed BTS 2009, Developer edition as well.

    Hi Chris,
    I don't think BTS 2009 and BTS 2013 (or for that matter any two versions of BizTalk) can be installed on the same OS. MS SQL Server and Visual Studio cannot
    distinguish which instance is started. Use Microsoft Virtual Server instead.
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Two Essbase instances on the same box

    Hi folks,I was wondering if it is possible to have two instances of Essbase running on the same box (Win 2K server). We want the dev and the test environments to be logically seperate but physically on the same server.Thanks a lot for your help.

    It depends on the version of Essbase you are using. If you are on 6.2 or above, you can change the default listening port for the Essbase agent and application server processes, which allows you to have multiple instances on the same box.An easier way to run multiple servers on one box might be to use technology like VM Ware or Microsoft Virtual PC - they allow you to create a virtual machine which can have its own Essbase install, with your production Essbase environment running on the "base" OS.RegardsJade-------------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

  • 9ias R2 infrastructure and middle tier on the same box

    Can someone please point me to a referece where the details of installing 9iasR2 on the same box are located? I need information on the install and especially on the Unix scripts and the appropiate enviroment variables that need to be configured to start/stop iASR2. i.e. dcmctl needs to be called twice? for each httpd server instance?
    If at all possible, notes on Reports and Forms variables startup scripts would be helpful. I've search through metalink but only found crumbs...
    System in Question
    Sun Sparc
    Solaris 8

    Claudio,
    Check out the Oracle9i APplication Server Administrator's guide - chpt 2 and 3 lay this out pretty well. In my case, my infrastructure is in "isuites" and my base is "isuitesDB", so it is fairly clear (but could be clearer) which service belongs to which install.
    I don't remember where, but also in that document is info that specifically states the order that must be followed in starting up each of the tasks.
    r.b.

  • BW and R/3 in the same box with a single instance  ECC 5.0

    Hi anybody using this scenario of having bw and r/3 in the same box....we are planing to consider in our project.
    will be happy if anybody can provide me some help on this.
    thanks and regards
    neel

    HI Neel Kamal,
    I think its a better option to distinguish OLTP like R/3 or ECC and OLAP like BW rather on a single instance
    from the above posts
    Let us know if this holds good
    Thanks,
    Raj

  • I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer  but  i get a error stating server unavailable' .  please help me as my phone is stuck at the set up page

    i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer  but  i get a error stating server unavailable' .  please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

    Contact Apple support for warranty service.

  • Entity Framework - Code First - Migration - How to access SQL Server and Oracle using the same context?

    Hello,
    I use Entity Framework code first approach.
    My project is working fine with SQL Server. But, I want to access Oracle too. I want to switch SQL Server and Oracle in run time.
    I am able to access Oracle using "Oracle.ManagedDataAccess.EntityFramework.dl" in a new project.
    But, Is this possible to access SQL Server and Oracle in the same project.
    Thanks,
    Murugan

    This should be possible with a Code-First workflow.  In Code-First the database mapping layer is generated at runtime.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • Picture and text in the same box for the calender?

    Is it possible to put a small picture in the box (for say May 4) and also get a short text line in the same box?
    When I'm doing it now, the picture takes up the whole box and the text goes underneath.
    Thanks

    Unfortunately that's how it works. If you have a 3rd party editor you could add the text to the picture before adding it to the calendar. Put in a feature request at http://www.apple.com/feedback/iphoto.html.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Can i run UDP  client and UDP  server socket program in the same pc ?

    hi all.
    when i execute my UDP client socket program and UDP server socket program in the same pc ,
    It's will shown the error msg :
    "Address already in use: Cannot bind"
    but if i run UDP client socket program in the remote pc and UDP server socket program run in local pc , it's will success.
    anybody know what's going on ?
    any help will be appreciated !

    bobby92 wrote:
    i have use a specified port for UDP server side , and for client define the server port "DatagramSocket clientSocket= new DatagramSocket(Server_PORT);"Why? The port you provide here is not the target port. It's the local port you listen on. That's only necessary when you want other hosts to connect to you (i.e. when you're acting as a server).
    The server should be using that constructor, the client should not be specifying a port.
    so when i start the udp server code to listen in local pc , then when i start UDP client code in local pc ,i will get the error "Address already in use: Cannot bind"Because your client tries to bind to the same port that the server already bound to.

  • Two different 10g installations in the same box

    Hi,
    I installed oracle 10.2.0.2 and 10.2.0.4 in the same box, using different paths as ORACLE_HOME, but the same user... I am gettin this errors when trying to create an instance:
    hu Feb 12 10:31:29 2009
    Errors in file /oracle10/app/oracle/admin/SIDBDPR1/bdump/sidbdpr1_ckpt_29994.trc:
    ORA-07445: exception encountered: core dump [kgskhighthreshold()+72] [SIGSEGV] [Address not mapped to object] [0x0000001F6] [] []
    Thu Feb 12 10:31:44 2009
    Errors in file /oracle10/app/oracle/admin/SIDBDPR1/bdump/sidbdpr1_pmon_29984.trc:
    ORA-00469: CKPT process terminated with error
    Thu Feb 12 10:31:44 2009
    PMON: terminating instance due to error 469
    Instance terminated by PMON, pid = 29984
    Wonder if this error could be a consequence of the /usr/local/ssl/lib/ files update... I first installed 10.2.0.2, then 10.2.0.4, and I am using 10.2.0.4 to create the instance.
    Thanks!!!

    ISSUE CLARIFICATION
    ===================
    -- Problem Statement:
    CKPT crashed with ORA-07445 [kgskhighthreshold()+72] during CPU count dynamically.
    ISSUE VERIFICATION
    ==================
    Verified the issue referencing data collected records as DC#1.
    CAUSE DETERMINATION
    ===================
    The issue matches exactly Bug 7172531 as I mentioned based on the error, symptom and call
    stack.
    CAUSE JUSTIFICATION
    ===================
    - Same erorr : ORA-7445[kgskhighthreshold]
    - Same symptom : CKPT crash during cpu count change
    - Same call stack : gskhighthreshold kskcpucc ksbcpu_mod kspptval kspset0
    PROPOSED SOLUTION(S)
    ====================
    Apply one-off patch for bug 7172531 on top of 10.2.0.4.
    PROPOSED SOLUTION JUSTIFICATION(S)
    ==================================
    Note 7172531.8: Bug 7172531 - Dump when CPU count dynamically changed
    SOLUTION / ACTION PLAN
    ======================
    -- To implement the solution, please execute the following steps::
    Apply one-off patch for bug 7172531.
    KNOWLEDGE CONTENT
    =================
    Note 7172531.8: Bug 7172531 - Dump when CPU count dynamically changed
    Email Update button has been pressed: Sending email to [email protected]

Maybe you are looking for