DHCP Server with the Static IP fill out DNS information
When filling out the DHCP Server with the Static IP from ipconfig.exe in the "Preferred DNS server IPv4 address:
192.168.1.199
The same as in the static IP. The IPv6 DNS one validates IPv4 does not.
I tried using the IPv4 Address and that validated but gave an error at the end: 1059 and 1046.
Gives an error:
"The DNS Server at the specified IP address does not support the required TCP protocol."
Hi,
Firstly, would you please post the result of running “ipconfig/all” on the DHCP server and domain controller?
It seems that the DHCP server cannot be authorized in AD DS. Please make sure that the DHCP server is a domain member and try to ping the domain controller on the DHCP server.
Best regards,
Susie
Similar Messages
-
Server version: Windows server 2008 R2 Ent.
Structure of DHCP scopes: Two DHCP server 50% to 50% all allocation for per scopes.
Question: Sometimes the DHCP server
allocate the IP address at the same time to the a strange MAC address per IP address, the type is "DHCP/BOOT", it cause DHCP scopes out of space at some time point. We need clear up them manually.
I found strange MAC address in HEX is the IP address which the server allocated.
Someone meet the issues before, any solution for this ?
Thanks !
Client IP Address
Name
Lease Expiration
Type
Unique ID
10.199.190.0
10.199.190.0
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e3000
10.199.190.46
10.199.190.46
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e343600
10.199.190.59
10.199.190.59
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e353900
10.199.190.69
10.199.190.69
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e363900
10.199.190.74
10.199.190.74
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e373400
10.199.190.90
10.199.190.90
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e393000
10.199.190.101
10.199.190.101
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31303100
10.199.190.104
10.199.190.104
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31303400
10.199.190.110
10.199.190.110
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31313000
10.199.190.114
10.199.190.114
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31313400
10.199.190.117
10.199.190.117
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31313700
10.199.190.121
10.199.190.121
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31323100
10.199.190.138
10.199.190.138
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31333800
10.199.190.144
10.199.190.144
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31343400
10.199.190.153
10.199.190.153
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31353300
10.199.190.156
10.199.190.156
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31353600
10.199.190.157
10.199.190.157
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31353700
10.199.190.163
10.199.190.163
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31363300
10.199.190.165
10.199.190.165
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31363500
10.199.190.168
10.199.190.168
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31363800
10.199.190.169
10.199.190.169
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31363900
10.199.190.174
10.199.190.174
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31373400
10.199.190.177
10.199.190.177
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31373700
10.199.190.184
10.199.190.184
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31383400
10.199.190.188
10.199.190.188
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31383800
10.199.190.189
10.199.190.189
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31383900
10.199.190.192
10.199.190.192
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31393200
10.199.190.197
10.199.190.197
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e31393700
10.199.190.201
10.199.190.201
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32303100
10.199.190.202
10.199.190.202
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32303200
10.199.190.209
10.199.190.209
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32303900
10.199.190.210
10.199.190.210
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32313000
10.199.190.211
10.199.190.211
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32313100
10.199.190.212
10.199.190.212
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32313200
10.199.190.213
10.199.190.213
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32313300
10.199.190.216
10.199.190.216
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32313600
10.199.190.219
10.199.190.219
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32313900
10.199.190.222
10.199.190.222
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32323200
10.199.190.225
10.199.190.225
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32323500
10.199.190.226
10.199.190.226
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32323600
10.199.190.229
10.199.190.229
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32323900
10.199.190.233
10.199.190.233
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32333300
10.199.190.235
10.199.190.235
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32333500
10.199.190.238
10.199.190.238
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32333800
10.199.190.240
10.199.190.240
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32343000
10.199.190.242
10.199.190.242
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32343200
10.199.190.243
10.199.190.243
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32343300
10.199.190.246
10.199.190.246
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32343600
10.199.190.249
10.199.190.249
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32343900
10.199.190.251
10.199.190.251
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32353100
10.199.190.252
10.199.190.252
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32353200
10.199.190.255
10.199.190.255
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139302e32353500
10.199.191.1
10.199.191.1
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e3100
10.199.191.2
10.199.191.2
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e3200
10.199.191.5
10.199.191.5
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e3500
10.199.191.6
10.199.191.6
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e3600
10.199.191.8
10.199.191.8
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e3800
10.199.191.13
10.199.191.13
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e313300
10.199.191.14
10.199.191.14
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e313400
10.199.191.15
10.199.191.15
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e313500
10.199.191.16
10.199.191.16
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e313600
10.199.191.17
10.199.191.17
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e313700
10.199.191.18
10.199.191.18
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e313800
10.199.191.19
10.199.191.19
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e313900
10.199.191.20
10.199.191.20
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e323000
10.199.191.21
10.199.191.21
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e323100
10.199.191.22
10.199.191.22
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e323200
10.199.191.23
10.199.191.23
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e323300
10.199.191.24
10.199.191.24
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e323400
10.199.191.27
10.199.191.27
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e323700
10.199.191.29
10.199.191.29
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e323900
10.199.191.30
10.199.191.30
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e333000
10.199.191.31
10.199.191.31
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e333100
10.199.191.32
10.199.191.32
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e333200
10.199.191.33
10.199.191.33
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e333300
10.199.191.34
10.199.191.34
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e333400
10.199.191.37
10.199.191.37
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e333700
10.199.191.38
10.199.191.38
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e333800
10.199.191.39
10.199.191.39
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e333900
10.199.191.42
10.199.191.42
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e343200
10.199.191.44
10.199.191.44
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e343400
10.199.191.49
10.199.191.49
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e343900
10.199.191.52
10.199.191.52
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e353200
10.199.191.54
10.199.191.54
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e353400
10.199.191.56
10.199.191.56
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e353600
10.199.191.61
10.199.191.61
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e363100
10.199.191.62
10.199.191.62
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e363200
10.199.191.64
10.199.191.64
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e363400
10.199.191.65
10.199.191.65
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e363500
10.199.191.66
10.199.191.66
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e363600
10.199.191.70
10.199.191.70
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e373000
10.199.191.72
10.199.191.72
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e373200
10.199.191.73
10.199.191.73
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e373300
10.199.191.79
10.199.191.79
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e373900
10.199.191.80
10.199.191.80
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e383000
10.199.191.81
10.199.191.81
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e383100
10.199.191.82
10.199.191.82
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e383200
10.199.191.83
10.199.191.83
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e383300
10.199.191.84
10.199.191.84
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e383400
10.199.191.86
10.199.191.86
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e383600
10.199.191.90
10.199.191.90
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e393000
10.199.191.91
10.199.191.91
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e393100
10.199.191.92
10.199.191.92
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e393200
10.199.191.93
10.199.191.93
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e393300
10.199.191.97
10.199.191.97
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e393700
10.199.191.98
10.199.191.98
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e393800
10.199.191.99
10.199.191.99
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e393900
10.199.191.101
10.199.191.101
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31303100
10.199.191.102
10.199.191.102
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31303200
10.199.191.105
10.199.191.105
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31303500
10.199.191.106
10.199.191.106
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31303600
10.199.191.108
10.199.191.108
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31303800
10.199.191.112
10.199.191.112
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31313200
10.199.191.115
10.199.191.115
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31313500
10.199.191.116
10.199.191.116
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31313600
10.199.191.117
10.199.191.117
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31313700
10.199.191.119
10.199.191.119
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31313900
10.199.191.120
10.199.191.120
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31323000
10.199.191.121
10.199.191.121
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31323100
10.199.191.125
10.199.191.125
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31323500
10.199.191.133
10.199.191.133
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31333300
10.199.191.146
10.199.191.146
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31343600
10.199.191.158
10.199.191.158
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31353800
10.199.191.162
10.199.191.162
2014/8/5 10:07
DHCP/BOOTP
31302e3139392e3139312e31363200Hi,
According your description, this may be caused by virus or malicious client.
Please try to perform a network capture on your DHCP server. Then find the device which send these malicious discover messages.
To download Network Monitor, please click the link below,
http://www.microsoft.com/en-hk/download/details.aspx?id=4865
To prevent this issue, you may implement NAP Enforcement for DHCP.
Here is a checklist of configuring NAP Enforcement for DHCP,
Checklist: Configure NAP Enforcement for DHCP
http://technet.microsoft.com/en-us/library/cc772356(v=WS.10).aspx
Hope this helps.
Steven Lee
TechNet Community Support -
Create a service request with the Account confirmed filled out
Hi all, I'm working on an IC scenario where we have to create a Service Request based on: functional location and customer.
This is the process steps:
1) search for the functional location (FL) and confirm it
2) confirm the account of the FL (we have a list of account related to the FL, partner function)
3) create a service request referring to the FL and the Account confirmed in the prev-step
My need is to find an automatic way to replicate the FL and the Account prev-confirmed directly into the Service Request, without repeat the search.
Any suggestions?Hi Anubhav, thanks for your replay. Your idea is good, but unfortunately our process is a little different. We have to manage with the FL, that is the central item of the Service Request, and with one of the several partner function of the FL.
So, first, the Agent has to search the FL and then confirm the right Account between the FL's partner (each time we have to create a service request, the Customer could be one of the FL's partner function). Now, I'm investigating if with a Badi, I can transfer the FL confirmed with the Account Identification, directly into the Service Request.
Interaction Center WebClient->Business Transaction->Service Ticket->BADI: Product Assignment for creation of Service Items
Thanks.
BR,
Andrea. -
Can I use DHCP snooping and IOS DHCP server on the same switch stack
Hello,
I am shortly going to be deploying a Cisco CallManager solution for a customer whose network comprises stacks of Catalyst 3850 switches.
There is no separate core/server farm switch so the CallManager servers, voice gateways and IP phones will all plug into the same stack and be in the same VLAN (not my choice!).
For security we want to enable DHCP snooping and were planning on using the IOS DHCP server on the Catalyst switch stack.
Will this work? - when I enable DHCP snooping in networks with separate access layer switches I set the uplinks to the core as trusted links.
I am not sure whether DHCP snooping will work in this case. Do I need to set the VLAN interface on the switch as trusted, is this even possible?
Unfortunately I do not have access to a layer 3 switch to test this at the moment.
ThanksNope. That's the issue.
They'll sync on a third device acting as a hotspot, but the device sending a signal is not "on" the network it creates so the airport is all by itself on that network. At least that is what it looks like to me. Anyone have another take on it? Seems pretty silly that an iPad can put out a wifi signal, an Airport Express can receive a wifi signal, and yet there is no simple way to get them to communicate under this particular condition. -
Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?
Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad -
A server with the same hostname could not be found!
Hi macusers,
I saw that error on multiple threads but I found none related to my issue. So, before ignore it let's describe it:
Two MAC Mini: one early 2009 and second late 2010. Both OS 10.9.1, MacKeeper installed, 6+Gb for RAM. Both uses the same router to connect the internet. Both are LAN connected not WiFi. I even changed the DNS addresses on router using Google DNS.
On Mac 2009:
1. Safari opens pages randomly. Sometimes a website is not open but when I create a new tab and select the website from bookmarks the website is opened while in previous tab still says: Safari cannot find the server .... All those websites are used in my daily work. I am not reseting Safari unless necesary.
2. MAIL is showing online only Gmail acccount from 4 accounts. The rest of the accounts are not Gmail and appear as Offline. I restart MAIL and they appear online. I have to do that Open/Close MAIL several times a day.
3. Sharefile and oDesk Team application cannot be opened because of that error: A server with the same hostname could not be found!
4. Apple Store is displaying questions marks instead of the icons and I can barely see what softwares I have installed.
Now the beauty. Only on MAC 2009 I am experiencing those issues. The other MAC is fine. So far.
What I tried so far:
A. Reboot in SafeMode and Repair Permissions, Repair Disk. Everything OK.
B. PRAM Reset and SMC Reset.
C. Scan for viruses. No virus detected.
oDesk Team app is working fine on the other MAC and I managed to install it on Mac 2009 on Windows 7 partition as well. Is working fine.
Here are some screenshots showing you some of the errors I am picking on my side.
That one is taken while trying to connect to ShareFile. After three or four attempts it finally managed to connect.
That was a beauty. While MacKeeper was showing me that I am Offline, I was talking on Skype with a friend.
Still cannot access oDesk Team application. However, after several attempts it is logging but what is showing me is a real nightmare.
If I choose to see my contracts (though in the upper corner there is not my account) they do appear:
Any valuable entry will be highly appreciate it.
Warm regards,
Sebastian
P.S. I just remembered that I saw on a post in here related to the same error that someone from Apple asked a guy to make a test in terminal using a command line. I do it on my MAC and here is the result:
Message was edited by: sebdeaHi Grant,
Here is what I did and so far seems it is wworking.
1. I deleted oDesk and ShareFile. I removed them using MacKeeper (I found this application very usefull for uninstalling applications as MacKeeper looks for them all over the computer: cache, preferences, application support etc.) While for oDesk is simple as I can look myself for oDesk in any file names, whith ShareFile was a little tricky to amke it amnually as MacKeeper find files that contain Citrix name then ShareFile. I will not guess unless I would search the internet on how to manually remove sharefile from my system.
2. I manually delete all cahe files and folders from ~Library and ~User/Library.
3. After reboot I installed Onyx and order maintanance where I checked all its options, including but not limited to DNS caches, fonts caches, everything.
4. After I reboot computer, I went in Disk Utility and Repaired permissions.
Reboot again. Now seems to work fine. At least odesk Team is working properly. I will have a second thought for installing ShareFile.
Some romanian mac users suggested to check my router connectivity and change some DNS in it. Looks like that was also a problem on some MACs. I recall the few weeks ago I had an issue with TP Link router. My computer wasn't connected to internet, though router showed that there is internet connection. I ping router from my computer and I received answer from ping. I ping google from computer, nothing. I ping google from router, was wroking. I connected the computer directly to internet without router, was wroking. When connected back through router, nothing. I contacted the guys from TP Link and they suggested to use google DNS instead of those my ISP provided. But since then I had not experienced any issue with router and internet, until now. The DNS are still those from google.
I will keep you updated if any issues are appear again. So far, it is working perfectly as it supposed to work.
Warm regards,
Sebastian -
I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKSHello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Problem in aligning dynamic UI with the static UI
Hi All,
I have problem in aligning dynamic UI with the static UI, I am using Matrix layout.
Static fields are spread over 2 colums and 3 rows:
lableA SPACE input field SPACESPACE lable B SPACE input field
lableC SPACE dropdown SPACESPACElableD SPACE dropdown
lableE SPACE dropdown SPACESPACElableF SPACE dropdown
Now when a value is selected in C, than E becomes visible, and depending on the values selected in E, there are dynamic UI generated, i.e dynamic lables and depending on some validation it will be either a dropdowns or input fiels or both.
at run time screen is like this:
lableA SPACE input field SPACESPACE lable B SPACE input field
lableC SPACE dropdown SPACESPACElableD SPACE dropdown
lableE SPACE dropdown SPACESPACElableF SPACE dropdown
dynaSPACEdropdown
dynbSPACEinput field
if I change my selection in E than layout looks like:
lableA SPACE input field SPACESPACE lable B SPACE input field
lableC SPACE dropdown SPACESPACElableD SPACE dropdown
lableE SPACE dropdown SPACESPACElableF SPACE dropdown
dynaSPACESPACEdropdown
dynbSPACESPACEinput field
Requirment: I need all the lables as well as dropdown/ input fiels in line with the static fields irrespective of my selection in E.
Something like this:
lableA SPACE input field SPACESPACE lable B SPACE input field
lableC SPACE dropdown SPACESPACElableD SPACE dropdown
lableE SPACE dropdown SPACESPACElableF SPACE dropdown
dyna SPACEdropdown
dynbSPACESinput field
dyncSPACESdropdown
All this elements are in a group and that group has 2 transparent containers, 1 for static and for holding dynamic UI.
I tried playing with the container properties, and also tried fixing width of dynamic UI but still the alignment issue is encountered.
Can U guys plz give in ur valuable inputs as i need to fix this urgently.
Regards,
JJHi Armin,
Can you please elaborate your solution ?, I do not have an idea of InvisibleElement & IWDView.resetView() ,
If you can give me the exact pointer than it would be great and a good learning exp. for me.
Thanks for the action assignment part, it worked.
if (wdContext.nodeMaterialClass().size() > 0 && wdContext.currentContextElement().getActionMatCls()) {
if (wdContext.currentMaterialClassElement().getMaterialClass_Description() != null || !wdContext.currentMaterialClassElement ().getMaterialClass_Description().equalsIgnoreCase(" ")) {
IWDGroup Searchgroup = (IWDGroup) view.getElement("DynGroup");
Searchgroup.destroyAllChildren();
view.getContext().reset(false);
for (int i = 0; i < wdContext.nodeMaterialCharateristcs().size(); i++) {
//this for label
IWDLabel CharLabel = (IWDLabel) view.createElement(IWDLabel.class, "label" + i);
CharLabel.setText(wdContext.nodeMaterialCharateristcs().getMaterialCharateristcsElementAt(i).getDescr_Char());
CharLabel.setDesign(WDLabelDesign.EMPHASIZED);
CharLabel.createLayoutData(MatrixHeadData.class); CharLabel.setWidth("154px"); Searchgroup.addChild(CharLabel);
further there are conditions to create either dropdown or input field
Can you please point where and how to apply your solution.
Regards,
JJ -
I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps? -
Hi Folks
Not to good at this techno stuff have a message on my phone saying "a server with the specified hostname could not be found" can anyone tell me what this means and how to fix it?
ThanksHi on several apps, eg local paper, can get printed word but no photos or media etc.
-
I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.
I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
Also Time Machine does not back up a boot camp partition. -
With the new ipad coming out soon, why should I buy the ipad 2?
with the new ipad coming out soon, why should I buy the ipad 2?
I can only echo what Pogo says about buying based on what it does today.
3 weeks ago I bought a Mac Mini. A new Mac Mini model has been rumoured to come out anywhere between the same week I made my purchase and the end of August. None's been released as yet.
I wanted one in the week of June that I bought mine so I bought it based on the fact that it did what I wanted and I couldn't imagine anything which could be added that I'd want - my MacBook Pro doesn't have Thunderbolt so the most likely addition isn't really going to be much use for me.
Basically you have to buy what you what based on what's out at the the time.
I can promise that within seconds of the iPad3 being released, the web will be full of rumours about the next one! -
with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????
We are users here. We cannot possibly know when a new update will be available.
-
This may seem basic, but I just discovered that I do not have a share button (the one with the little arrow jumping out) to the left of my address bar on Safari for my Mac. I do have one on my IPad and use it often. Can anyone tell me why my Mac is missing this icon and how to get it? Thanks.
lawrencefromgettysburg wrote:
I went in to do the software update, and learned that my software is up to date.
Going from Lion to Mountain Lion is considered an upgrade (because it is not free), not an update.
So yes, given that you have Lion, you are up to date. But if you can, you might consider going to Mountain Lion for a fee.
Here's what you need to do the upgrade:
System requirements for OS X Mountain Lion -
Impossible to start UCM managed server with the WLS console
Hi,
I cannot start the UCM managed server with the WLS console. The node manager is running by startNodeManager.cmd. The admin server by startWebLogic.cmd.
When I start the UCM server with the console WLS (Environment, Servers, Control tab and Start on the checked server), it seems to be running (the state is RUNNING) but when I open the url on the the web server UCM there is a 404 error
In the log, there are many java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup, oracle.security.jps.wls.JpsWlsStartupClass, oracle.core.ojdl.weblogic.ODLConfiguration, oracle.jrf.AppContextStartup, oracle.as.jmx.framework.wls.spi.StartupListener, oracle.ias.cache.Startup, oracle.dms.wls.DMSStartup ...
If I start UCM directly by startManagedWebLogic.cmd and not with the WLS console, everything is OK. No error in the log and UCM server is working well
Any idea ?
Thanks
HuguesGreat!
I had the same error: when starting UCM on WL Console, it starts and says Running. But when accessing it on the browser receive the error 404. In the other hand, when starting with Commands, it force shutdowns.
I have set the StartScriptEnabled property to true, now I can start UCM only on the command Line, to start it on WL Console, I have to manually start the node manager.
Is there a way/script to start the node manager automatically?
Regards,
Maybe you are looking for
-
After deleting files to clean my computer I now can"t connect my camera to my iphoto
After deleting files to clean my computer I now can"t connect my camera to my iphoto did I delete something and how can I add it back?
-
Hardware key for the sap system.
Hi Experts , My licence is going to expired within 3 days, i tried to request another key but Hardware key is mandatory. I tried for Hardware key (HWID) , running the "saplicence.exe" but not found. Tcode 'SLICENCE' is not avialable. Help me in this
-
Data Migration Strategy: Legacy to CRM (BP and Case)
Hi, What is the best strategy to implement in migrating data (Master and Transactional) from a Legacy System (text file) into SAP CRM: Legacy System Migration Workbench (LSMW), Master Data Manager (MDM) or ABAP? And what are the reasons? Thanks, Nhla
-
Illustrator CC Free Transform and Snapping
It seems that in CC the Free Transform tool does not snap to grid when resizing (for example) a rectangle. If I have "Snap to Grid" turned on, it only is taking effect with new objects getting drawn. Am I understanding this correctly? If I draw a rec
-
UIX 2.1.7: Howto NOT escape HTML
Hi all, we are using UIX 2.1.7 together with BC4J 9.0.3. We have a bc4j:table that displays data from a view object. One of the VO attributes contains HTML (just tags for formatting bold, italics, ...). When the UIX page is displayed, the HTML is not