DHCP service not working

Hello,
I have airport express base station and I have set it up to give DHCP IP addresses to wireless clients as I don't have any DHCP server in the ethernet LAN.
But the Airport doesn't give out IP addresses at all.
In the Internet tab, I have selected connect using Ethernet and Connection sharing: "Distribute range of IP addresses".
In the TCP/IP tab, I have given a valid manual IP to the base station.
In the DHCP tab, I have specified the DHCP start/end addresses.
Now when the wireless clients try to connect they only get limited connectivity and if I give a manual IP to the client he/she gets the internet connectivity.
Can anybody guide me what could be causing this? I have airport utility 5.5.3.

"Distribute a range of IP addresses" is a rarely used setting, which would only be used if your service provider has furnished you with a specific bank of IP addresses to use.
Try using the "Share a public IP address" setting for Connection Sharing and the AirPort Express will hand out IP addresses automatically to connected clients.

Similar Messages

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

[svn] 4226: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

Revision: 4226 Author: [email protected] Date: 2008-12-03 15:25:17 -0800 (Wed, 03 Dec 2008) Log Message: ----------- Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working. QA: Yes Doc: No Checkintests Pass: Yes Details: * Make sure the <reliable/> option is treated as a nested element rather than an attribute of its parent <network> element. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/LCDS-517 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/Destination.java

[svn] 4195: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4195
Author: [email protected]
Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

Revision: 4195
Author: [email protected]
Date: 2008-11-26 13:08:23 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/config/ServerConfig.as

WRE54G - DHCP Soundbridge not working

I am sure everyone has has had issues getting a WRE54G up and runing at home - not the easiest of products (when using the encryption option).
I have an Organce LiveBox ADSL/Wireless router (Sagem badged Orange) and needed the range extended to get my Soundbridge (Pinnacle badged Roku) working elsewhere in the house.
A couple of problems:
- DHCP does not work via the WRE54G. Solved this by setting a static IP address on the Soundbridge (you telnet to it on port 4444 and use the ipset command line utility)
- The Soundbridge can access Internet radio stations fine, but if connected via the WRE54G then it loses contact with the Firefly media server
- WindowsXP PnP "sees" the Soundbridge the "other side" of the the WRE54G but cannot access it when you double click on the icon. Not an issue as just using the static IP address in the browser gets the configuration screen
I guess that I had expected the WRE53G to act more like a repeater, but is appears to be working as a bridge and the bridging function is somewhat broken.
Anyone have any ideas / fixes for the product? This is highly infuriating.

Try a different wall plug and see if that makes any difference, try a different power cable of the same power specification or a universal power adapter(if possible)...Maybe the Power Adapter is faulty and the unit is still functional...

[svn] 4193: Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

Revision: 4193
Author: [email protected]
Date: 2008-11-26 11:40:05 -0800 (Wed, 26 Nov 2008)
Log Message:
Bug: LCDS-517 - Reliable messaging destinations created using runtime configuration (bootstrap service) not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Foundational update to include destination config in what we collect for runtime config exchange with new clients for destinations with network/reliable=true (LCDS only).
* Also typo in comment in AbstractConnectionAwareSession fixed.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-517
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/AbstractConnectionAwareSession.java
blazeds/trunk/modules/core/src/flex/messaging/Destination.java
blazeds/trunk/modules/core/src/flex/messaging/services/AbstractService.java

I experience issue with my Verizon iPhone5s cellular service not working on 3G.

I'm experiencing issue with my Verizon iPhone5s cellular service not working on 3G but LTE works great. I tried resetting network setting, new SIM card, reset iPhone to new too. I'm have the latest carrier code of 16.0. Iphone firmware 7.1.2.
I started experiencing this when verizon started advertising XLTE.
It is very frustrating when internet does not work when I'm in 3G area. Phone calls does work though. Signal is good too.
Thank you in advance.

I would agree w you but this only happens on Iphone5S.
Iphone5 works fine. I tested this with other Iphone 5 and 5s.
To test this, go to setting/celluar/turn off "Enable LTE"

DHCP failover not working

I am attempting to implement DHCP failover using load balancing with an Essentials and a Standard server. I have everything configured and working but I am facing an issue.
If I try to start the DHCP services on the Essentials server and the DHCP services on the Standard server are already started it will not start and I get error 1053 The DHCP/BINL service has encountered another server on this network with IP Address, 192.168.1.3,
belonging to the domain: . in the event log on the Essentials serve.
Any ideas why this is?

In a network of this size there is little need for multiple or failover DHCP servers. With a lease time in the one week category the chances that the server will be off line at the same time that clients need to renew are pretty slim. Should
the server simply be unavailable you can turn the DHCP on the router, or, as you intend, on the second server.
Larry Struckmeyer[SBS-MVP]
Larry, I am not sure I find this to be the case -- that rarely will the server be off at the same time clients need to renew. I volunteer support to a local non profit. Sadly, it's not uncommon for the Essentials server to not come up cleanly
after a Microsoft Update or a power outage. With DHCP not available on the WSE2012 server, employees who come in and fire up their laptops will in some cases hit the lease expiration. I'll get a phone call, and now there will be two frustrated
people. :-)
I *could* return to letting the router handle DHCP, but I've read too many times on technet and social forums the rather forceful recommendations by microsoft people that an Essentials served network should have DHCP running on the server.
I feel I'm stuck between a rock and a hard place. The strong recommendation from microsoft is to always serve BOTH DHCP and DNS from a WSE server. However, there appears to be no DHCP failover option for WSE, which will make my users unhappy
(and strain my volunteerism!).
Thoughts?
I've tried to research whether WSE will allow a router to act as a failover in hot standby mode, but haven't succeeded. (I'll then need to find a router that supports hot standby in a WSE environment.)
(I realize I am quite late to this thread. Hopefully that's not a problem.)
Steve

DHCP *still* not working.

i posted some of the problems i was having in this post here :
http://discussions.apple.com/thread.jspa?messageID=5706025
after reinstalling 10.5 Server about half a dozen times... DHCP randomly started working just fine and has been working pretty well in the past month or so.
then i got some new computers recently.
none of them get a DHCP address. not a single one. they all get self-assigned numbers.
and the log is once again filled with the familiar :
Feb 11 12:52:33 dropbox bootpd[312]: DHCP DISCOVER [en0]: 1,0:1e:c2:b7:d9:e3 <Air23>
Feb 11 12:52:33 dropbox bootpd[312]: service time 0.000963 seconds
Feb 11 12:52:34 dropbox bootpd[312]: DHCP REQUEST [en1]: 1,0:1e:c2:b7:d9:e3 <Air23>
Feb 11 12:52:34 dropbox bootpd[312]: service time 0.002062 seconds
Feb 11 12:52:34 dropbox bootpd[312]: DHCP REQUEST [en0]: 1,0:1e:c2:b7:d9:e3 <Air23>
Feb 11 12:52:34 dropbox bootpd[312]: service time 0.001575 seconds
Feb 11 12:52:35 dropbox bootpd[312]: DHCP REQUEST [en1]: 1,0:1e:c2:b7:d9:e3 <Air23>
Feb 11 12:52:35 dropbox bootpd[312]: service time 0.001488 seconds
repeat non-stop and for every single new machine i got.
anyone have any ideas?
i tried recreating the subnet from scratch again... no change.
i tried adding the <replythresholdseconds> to 0 again... no change.
where or how is the server keeping track of the "old" machines being viable and able to get an IP vs. the "new" machines which refuse to work at all? there has to be something somewhere where it is keeping track of this.
i also tried converting an old machine that never was on DHCP to DHCP ... it also was unable to get an address.
manually-assigned out-of-range DHCP addresses seem to work fine on the new machines however. my DHCP goes from 192.168.3.2 -.127 ... and addresses manually entered at .200+ all give the machines a network connection. this is a temporary solution however.
any ideas?
thanks.
zeb.

at this point in time... yes. hundreds of times. just near the bottom of the .plist.
tried it in the upper section where the subnet info is as well... made no difference.
let me copy/paste my .plist in here...
<dict>
<key>NetBoot</key>
<dict/>
<key>Subnets</key>
<array>
<dict>
<key>allocate</key>
<true/>
<key>dhcpdomainname</key>
<string>arcus.org</string>
<key>dhcpdomain_nameserver</key>
<array>
<string>209.165.164.3</string>
<string>209.165.164.13</string>
</array>
<key>dhcpnb_over_tcpip_nodetype</key>
<string>1</string>
<key>dhcp_router</key>
<string>192.168.3.1</string>
<key>lease_max</key>
<integer>10800</integer>
<key>lease_min</key>
<integer>10800</integer>
<key>leasetimesecs</key>
<string>3600</string>
<key>name</key>
<string>192.168.3</string>
<key>net_address</key>
<string>192.168.3.0</string>
<key>net_mask</key>
<string>255.255.255.128</string>
<key>net_range</key>
<array>
<string>192.168.3.2</string>
<string>192.168.3.127</string>
</array>
<key>selectedportname</key>
<string>en1</string>
<key>uuid</key>
<string>A604DFA1-6F33-4B7D-8081-1197E1D51D44</string>
</dict>
</array>
<key>dhcp_enabled</key>
<true/>
<key>replythresholdseconds</key>
<integer>0</integer>
<key>timeDatabaseUpdated</key>
<string>2006-04-25 07:20:31 -0800</string>
<key>timeServiceStarted</key>
<string>2008-02-13 16:24:40 -0900</string>
</dict>
i clipped out the header and <plist> tags... they are still there in the real file.
thanks.

Web service not working when called remotely

Hi there!
I built a simple web service to generate a sequence number to be cosumed by PDF forms.
It works perfecly when I run PDFs on my machine, using localhost, etc.
Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
Where should I look for error messages or other resources to aid me in identifying the problem?
Thank you very much for any hints!
Marcos

Hi there!
I built a simple web service to generate a sequence number to be cosumed by PDF forms.
It works perfecly when I run PDFs on my machine, using localhost, etc.
Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
Where should I look for error messages or other resources to aid me in identifying the problem?
Thank you very much for any hints!
Marcos

ACS 4.2 services not working

The server is running with Windows 2003 SP2 and due to some issue it got rebooted. After reboot all services stopped working.
CSAdmin, CSMon and CSRadius hanged in Starting state and CSLog in Stopping state. When i chaged the startuptype to manual and started these services
i got " Could not start the CSAdmin service on Local computer. Error 1053 The service did not respond to the start or control request in a timely fashion "
For CSLog service it gives the error message "The CSLog service on Local Computer started and then stopped. Some service stop automatically if they have
no work to do, for example, the Performance Logs and Alerts service."
In the eventviewer it shows "The description for Event ID ( 1 ) in Source ( CiscoAAA ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: CSAdmin, Can not initialize SchemeLayer, 74."
While automatic startup type event viewer shows below error.
"The description for Event ID ( 1 ) in Source ( acs ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: *** ERROR *** Assertion failed: 103401 (9.0.0.1271)
Unable to open file (C:\Program Files\CiscoSecure ACS v4.2\CSDB\acs.db) which previously opened successfully; error = 32.The description for Event ID ( 1 ) in Source ( acs ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: *** ERROR *** Assertion failed: 103401 (9.0.0.1271)
Unable to open file (C:\Program Files\CiscoSecure ACS v4.2\CSDB\acs.db) which previously opened successfully; error = 32."
Please help me to fix this.
Thanks

Since we had no access to ACS windows server. We tried to take backup from csutil but it gave schemalayer error message.As we have AV stopped, logs files deleted from the directory, killed the stuck services from the task manager and restarted the server. If it still not allowing you to restart the services, most likely you need to take backup, uninstall the ACS server and reinstall the same version of ACS followed by restore.
~BR
Jatin Katyal
**Do rate helpful posts**

HTTPS sites and services not working on Snow Leopard 10.6.6

Hi guys, any assistance would be appreciated as I really don't want to reinstall everything again.
*Problem description:* After reinstalling Snow Leopard after some issues, I am unable to get any https services working (such as the online back up system Carbonite), nor access any https websites. My Macbook Pro and Windows Laptop on the same network have absolutely no issues with it. +Please also note that this problem is not limited to Safari, any software or browser that uses HTTPS to connect will not work.+
*Attempted fixes:* Repaired Permission errors, deleted keychain and security preferences, and manually configured the network connection. I have also checked to make sure the date/time are correct and created a new user which has also not helped.
*Recent changes:* My iMac refused to start up after permission errors so I was forced to reinstall Snow Leopard. I did a fresh install after formatting the drive.
*Operating system:* Snow Leopard 10.6.6
*System specs:* 2009 24" iMac

If I was there with you,
As a "Best Practice"
#1- I would recommend that we make a FULL Bootable Backup of where you are, and confirm that it is bootable.
Then
As another Best Practice you should always have on the ready any and all INSTALLERS of your programs, along with the corresponding serial numbers,
I feel that being PROACTIVE is a much place to be, then REACTIVE.
#2 - I would be inclined to do a overlaying install of Snow Leopard, What happens is it will install a new OS while preserving ALL other info/data, including your Applications, Users.
Please keep me posted as to your results,
Randy Mac
RMACS, LLC

Task created to stop and start Health service not working.

We have multiple servers being grayed out so we created a task to stop and start the health service on SCOM 2007 R2. We have created two tasks one to stop and another task to start. The STOP task works but the START tasks keeps running but there is no result
as well as when i check in Services.msc it is still stopped. Below are the screen shots .
Task created to STOP the health service which is running.
Screen shot of service start task creation which is NOT working
The same was created for another service windows audio. Which worked for both stop and stop (Created separate tasks).
We also tried the recycle health service and chche which is also failing.
Can any one please help. The issue is on both SCOM 2007R2 and 2012 R2 both. Is there any other way to touch the health service.
We are facing the issue only with Healthservice.

Hi All,
Thank you for all your answers.
@ dktoa -
You are right we have to concentrate on the servers to determine why do they go grey (all in one site). But before we do that i felt i find a temporary solution. Then go deep investigation to solve the issue.
@Yan LI: As per the likn provided above you. I overrided the servers but still the health services were not starting or restarting. When i created a custom group and added the servers to that group in that site and then enabled the override on Restart
Health Service for a specific group and pointed towards that group then it worked.
Thanks All.

SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING

The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
But I am able to access the Configuration manager and TCP/IP are enabled.
I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
Tks - Vinay

Reporting Service
http://msdn.microsoft.com/en-us/library/jj219068.aspx
http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
Please find the helping URL
Thanks
Jaison A
http://infomoss.blogspot.in

DHCP service not working

Similar Messages

Maybe you are looking for