DHCP Settings not showing up

I have an OS X 10.4 server running 10.4.11 that has been running fairly well for some time. I recently had a need to go in and make some changes to the DHCP settings, but they aren't showing up. Trying to add another subnet seems impossible because the "Network Interface" option doesn't give me any interfaces to choose from. The new subnet doesn't get applied to my interface, so it uses the old settings that I can't see.
Running 'serveradmin settings dhcp' gives me:
2008-05-19 12:25:17.494 serveradmin[17130] * -[NSCFArray UTF8String]: selector not recognized [self = 0x31cec0]
2008-05-19 12:25:17.494 serveradmin[17130] Exception in doCommand: * -[NSCFArray UTF8String]: selector not recognized [self = 0x31cec0]
Trying to modify DHCP settings using serveradmin also gives the same error.
From what I've gathered, the DHCP settings aren't stored in their own file, but in the NetInfo database. Is there a way to clear out the DHCP part of this database, or overwrite it with imported settings?
Thanks,
-Craig Coleman

Okay, I used the Netinfo Manager to delete the "dhcp" key under "config" but it still has the same problems, except for the fact that the old dhcp config isn't there anymore.

Similar Messages

  • SEO Properties settings not showing in Term Driven Pages tab in Term Store

    Hi,
    Many people have documented the ability of setting up SEO properties to a term in the term store in SharePoint 2013, but I was not able to find a place to do that.
    Can anybody help me on figuring out how to set SEO properties for a given term via the term store UI ?
    I read somewhere that this can be achieved by setting the properties in the Term - Driven pages tab of a term but can't seems to have such option available.
    Thanks and Best Regards,

    Hi Supun,
    I have seen a similar post from you. You can take a look at the following thread:
    http://social.technet.microsoft.com/Forums/en-US/d3900557-a3ed-422d-9340-a213be8b539f/seo-properties-settings-not-showing-in-term-driven-pages-tab-in-term-store?forum=sharepointsearch
    I would suggest you to open only single thread for single issue. You can discuss your problem in this thread only.
    Thank you for your understanding and support.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • ProRes Setups in Custom Settings not showing up as Easy Setups 7.0.3

    Having trouble on a client's workstation:
    We have all of the "Additional Setups" copied into both the
    "HD>Library>Application Support>Final Cut Pro System Support>Custom Settings"
    as well as the
    "USER>Library>Preferences>Final Cut Pro User Data>Custom Settings"
    folders, but several of them do not show up at all in the Easy Setups dropdowns.
    Why is this, and how do I fix it for them?

    Best support for FCP I've found are here...
    http://discussions.apple.com/forum.jspa?forumID=939&start=0
    http://forums.creativecow.net/applefinalcutpro
    Have you tried trashing prefs? (thanks to Jon Chappell and the folks at Digital Rebellion)
    http://www.digitalrebellion.com/prefman/
    On last upgrade/update of FCP, did you do a full Archive/Install, or did you use Migration Assistant or upgrade/update directly over an existing installation?
    You might click on 'My Public Profile' at top right of this page and fill in some system specs...helps us help you.
    K

  • MSI P67A-C45 OC settings not showing correctly in windows.

    I have a MSI P67A-C45 and been playing about with overclocking. When I overclock it all shows fine in the bios but when I boot into windows, it does not show everything correctly.
    I have used CPU-Z, CPUID HWMonitor and the most uptodate msi controlcenter 2. It seems to show the voltages almost correct but the CPU frequency is not the same. See the 2 pictures. One with my bios settings and another of the programs I used in windows.
    If I use OC genie is show up all correct, just not if I do it manually. Turned off EIST and most power saving but still the same.
    Just another thing, the bios is a bit buggy to. The mouse seems to have a fit and select when I don't want it to or the wrong option. This is while I scroll down on the menu.
    My bios with OC settings
    In windows. Not showing correctly.

    Quote from: coremaster on 21-January-11, 07:19:08
    I have a MSI P67A-C45 and been playing about with overclocking. When I overclock it all shows fine in the bios but when I boot into windows, it does not show everything correctly.
    I have used CPU-Z, CPUID HWMonitor and the most uptodate msi controlcenter 2. It seems to show the voltages almost correct but the CPU frequency is not the same. See the 2 pictures. One with my bios settings and another of the programs I used in windows.
    If I use OC genie is show up all correct, just not if I do it manually. Turned off EIST and most power saving but still the same.
    Just another thing, the bios is a bit buggy to. The mouse seems to have a fit and select when I don't want it to or the wrong option. This is while I scroll down on the menu.
    My bios with OC settings
    In windows. Not showing correctly.
    I'm having the same issue here, bios 1.5
    With EIST disabled, I can get into windows at 4.5GHZ on a i5 2500K
    With it enabled, I cant get anywhere beyond 4ghz
    I'm going to run some tests now to check, but with EIST disabled, doesn't matter the clock I set on bios, the clock on window will show up always as the default clock speed

  • Photo Settings not showing up; cannot remove Ken Burns effect

    Hello,
    Earlier today, I selected the photo setting button and a little box showed up with the Ken Burns effect options in it, however now when I select photo settings, the only thing that shows up is the preview of the of photo zooming/panning. Please help... how do I get back to that little box so I can remove the Ken Burns effect from my photos! Thanking you!

    Also having the same problem. When going to show photo settings, it shows black screen. Un checking Ken Burns and updating does nothing. All photos in slide show have same super zoom of Ken Burns with no way to remove it or alter it.
    iMovie HD broken, iMovie 08 ***... The only reason I purchased Mac was for handling media and I end up doing projects on my old pc using photoshop elements.

  • Firefox Details/Settings Not Showing

    I open the application and it comes up just fine, but my computer is technically not showing that the application is open. I have a Mac, so the icon in the dock doesn't have the glowing circle underneath it that shows the program is open, and the bar at the top of my screen (where Finder is and where I could mess with setting specific to Firefox) isn't showing Firefox either.

    Please update to Firefox 27. [[Update Firefox to the latest version]]

  • Authorized DHCP Servers not showing up in Authorized list.

    I have used ADSI edit to validate that the correct servers are under: CN=NetServices,CN=Services,CN=Configuration,DC=Domain,DC=com
    Currently we are in 2003 R2 mode for the Domain but all of our DC's are Windows 2008R2.
    I did find a value for showInAdvancedViewOnly is set to TRUE.
    Thank you,
    Scott

    If you still have the ticket open with Microsoft Premier Support for the DHCP migration, I would contact the engineer that helped you explaining what you are seeing so they can resolve it. After all, it is part of the ticket.
    Please note, that TechNet forum support is not aligned with Microsoft Premier Support. They are two separate entities.
    In the meantime, you can try the following, but I would still email/contact the engineer assigned to your ticket for verification, since they are familiar with your infrastructure and servers. (This was quoted from:
    http://support.iyogi.com/networking/internet/when-netsh-dhcp-show-server-command-is-executed-and-you-are-getting-invalid-dhcp-server-references.html )
    Run the ‘Netsh’ command to verify, if the ‘CN=NetServices’ container contains the references to the invalid DHCP servers.
    Check the properties of the DHCPROOT key under CN=Configuration, CN=Services, ‘CN=NetServices’, ‘DC=Domain’, and ‘DC=com’ to verify if there is a ‘DHCPServer’ attribute containing the references for the invalid DHCP servers.
    Delete invalid references.
    Force replication
    After replication is successful, verify by executing the ‘netsh dhcp show server’ command.
    Ace Fekay
    MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
    This post is provided AS-IS with no warranties or guarantees and confers no rights.

  • DHCP Clients Not showing in Server Admin....but are there

    Hi,
    DHCP has just recently stopped showing me the MAC addresses of connected clients. It always says 0 though I know through the logs that DHCP is working. Any ideas? I will give more info if needed but wondering if it's maybe a bug or something?
    Thanks.

    try if this helps:
    _*Music Folder Files Not Added v2.0*_
    This application will list the file paths of the files in your designated "iTunes Media" folder which are not in iTunes' library. Additionally, you can select a different parent folder and its contents will be compared to the iTunes library. Options to Add a selection of found files to iTunes or move them to the Trash.
    JGG

  • MobleMe Sync Settings Not Showing in ITunes

    Though all my settings are correct, I'm not seeing "Your xxx are being synced with your MobileMe over the air." in iTunes everywhere I should see it. It should be showing for everything and I just see it for "iCal Calendars".
    Is anyone else seeing this happen?

    Don't complain to me, complain to Apple:
    http://www.apple.com/feedback/iphone.html

  • Personal export settings not showing in Prelude

    Hi,
    I have two computers where the export settings I make in AME doesn't show up in Prelude, the prores presets I have downloaded from Adobe doesn’t show up either. I have tried to uninstall Prelude but it didn’t help.
    I found this thread: https://forums.adobe.com/thread/1410827 but it didn’t help me.
    The machines are two Mac Pro (Early 2008), 2 x 2.8 GHz, 4GB RAM
    These are the only machine I have this problem with.

    There are two ways to fix this: the quick fix and the complete fix.  When you installed AME 8.0.1, it should have automatically executed the process described in the complete fix.  But, in some cases, the process is not working.  We’ve been working to fix this on the next patch release.  Till then, please use the following manual fix.
    Easy and quick fix: (You need to manually copy each AME presets you created in order for Prelude to see)
    Please copy the ProRes presets (or any presets you want Prelude to see) into the following location.
    Win: <OS dirve>:\Users\<current user>\AppData\Roaming\Adobe\Common\8.0\Presets
    Mac: /Users/<current user>/Library/Preferences/Adobe/Common/AME/8.0/Presets
    Complete fix: (Once you create a new preset in AME, it should automatically shows up in Prelude.  No manual copy is needed.)
    Win:
    1. Quit all apps.
    2. Access to %APPDATA%\Adobe\Common\AME\8.0\
            If you see a "Presets" folder, please delete this.
    3. Under C:\Windows\System32, right click "Cmd.exe" > select "Run as administrator".
    4. Execute the following command.
    mklink /D %APPDATA%\Adobe\Common\AME\8.0\Presets "%HOMEPATH%\documents\Adobe\Adobe Media Encoder\8.0\Presets"
    Mac:
    1. Quit all apps.
    2. Access to ~/Library/Preferences/Adobe/Common/AME/8.0/
              Delete "Presets" folder from this location if there is.
    3. In Mac Terminal, execute the following command.  This creates a special kind of shortcut called symbolic link.
    sudo ln -s ~/Documents/Adobe/Adobe\ Media\ Encoder/8.0/Presets ~/Library/Preferences/Adobe/Common/AME/8.0/Presets

  • Outgoing Mail Settings Not Showing

    Hello,
    I recently purchased an iPhone 4s, and had a little trouble sending e-mail from it (Hotmail). I had the settings good to go, and was able to send/receive e-mail from my Hotmail account, but then last night I got the Delivery Failure notification when I tried to send an e-mail. No problem, I'll just check the outgoing mail settings to make sure everything is set correctly, but they're not there?? I go to Settings>Mail, Contacts, Calendars>My Hotmail Account>Account, and it doesnt show the Outgoing or Incoming Mail settings. It only has my e-mail, password, description, and below that the S/MIME on/off setting. I cant find anything on where the settings went. Am I going crazy or does anyone know what's going on?

    Update: I called in to Apple Support and they advised me to set up another e-mail account on the phone. I did this (gmail) and everything is fine. It appears to be an issue with Hotmail and iOS playing well together. I've seen this around the internet as well, but haven't come across a case where the Outgoing mail settings just disappeared.

  • E4200 : DHCP Reservation not showing anything !?!

    Hello,
    When I'm in Setup -> Basic Setup -> click on DHCP Reservation, I don't see all entries I've created earlier but computers that connect still have the correct IP address on the network; I don't know if I can create additional entries if nothing appears, what should I do ?
    When I go to Status -> Local Network -> DHCP Client Table the list is blank but some computers are connected to the network
    I'm using firmware 1.0.01 build 10  Feb 21, 2011, language = English, Firefox 4.0.1
    Rebooting the router doesn't change anything, I can't see connected LAN equipment and DHCP Reservation is empty despite the fact I've created entries.
    Together with the "Access Restriction" which doesn't allow to block a computer from 10pm => 8am unless you create 2 rules + various issues with attached USB + 2.4Ghz signal that is far from optimal (never able to achieve more than 144-N-Mbps) and I ask myself if I will not contact the store where I purchased this unit and ask a refund (and buy something else from another brand...)
    It's the first time I buy a Linksys equipment and very disappointed, support doesn't seem to be very serious
    Thanks for any suggestion
    PS: Where do I ask for a refund or something similar in Linksys site ? If nothing exists, I'll let the store where I purchased this unit now about the present post

    Thanks for your answers
    Today it works and I didn't reboot, restart or reset anything
    I can see DHCP Reservation list + DHCP Clients Table
    Same PC, same network, nothing restarted, reset, changed or added and now it works
    Weird
    I would not like to re-create everything in the DHCP Reservation List as I have 17 entries so far (and going to add 1 more...)
    Apparently, if I can't see my list, I have to wait a few days

  • Central Search - why are my config criteria settings not showing?

    Hi
    I have set up the central search feature and and it works well. The SAP standard criteria attributes are displayed. Using the configuration tool on component BP_HEAD_SEACH I have chosen to display only:
    Name1 / Last Name
    Account ID
    Employe Resp - Last Name
    Marketing Attribute
    Contact - Last Name
    Role Config Key: ZGL_AB_BM
    Component Name: BP_HEAD_SEARCH
    Component Usage: Search
    Object Type: <DEFAULT>
    Object Subtype: <DEFAULT>
    In the selected search criteria both the Displayed and Use in Central Search columns have been checked.
    When I go to test my changes, the 5 search criteria above are shown in the drop down boxes in the work center page but the drop down context menu underneath My Saved Searches continues to show the standard SAP criteria. It does not seem to implement the config changes I made.
    Am I missing something?
    Regards
    Declan

    I have now got this working.
    The central search will work with SAP note 1293695: Central Search Menu - Use Configuration of UI Object Type implemented and with the following config attributes:
    Role Config Key: <Role Config Key>
    Component Usage: <DEFAULT>
    UI Object type: <DEFAULT>
    Object Subtype:<DEFAULT>
    Also worth mentioning is that the search objects offered in the central search menu is cached in a server cookie by role and language. By default it expires after an hour and the next user who starts the application after this rebuilds the cache - which may take usually 30 seconds up to a minute for a particular user and a business role.
    As a consequence customizing changes related to the central search are not visible right away. The cache can be invalidated manually via method CL_CRM_CENTRAL_SEARCH=>CLEAR_CACHE using the SE24 and its Test-Button. Alternatively you may set the user parameter 'CRM_CENTRAL_SEARCH' to 'REBUILD_MENU': In this case the menu is rebuilt with each application start for the corresponding user and the business role used.
    Hope this helps other users.
    Cheers
    Declan

  • Custom Compressor settings not showing in Final Cut Pro X?

    I have FInal Cut Pro X and Compressor 4.1. I've made a few custom settings in Compressor and can even see them in Library/Application Support/Compressor/Settings but they don't show up when I click on 'Export using Compressor Settings' in Final Cut Pro X.

    Do you see them in the Custom follder in the Compressor Settings pane?
    How about here in the FCPX Destination Preferences?
    Russ

  • AET : Personalize settings not showing the check box

    Hi Guys
    I'm trying to enable the AET functionality using the option  Personalize->Personalize Settings from the header area which is top right side, but there I'm not able to see the check box with option enable configuration mode.
    Is any notes is missing? even though there is another option (from navigation bar entry) we can access the AET functionality but the first one is the easiest way to achievet this.
    pls adivice what is missing.
    Thanks & Regards
    Raj

    HI Raj,
    This depends on the authorizations you have in the backend system. Also, the business role of the crm webui.
    Please check with your Basis admin team.
    -Satish

Maybe you are looking for