DHCP will not disable

I have a WRT600N (software version 1.01.35 build 5) on a network with Windows SBS 2003. The SBS is running DHCP. I disabled DHCP on the WRT600N. The problem is that once a week the SBS DHCP shuts down because it believes the WRT600N is running DHCP server.
The WRT600N's log file shows the following: "Get Wan IP Address : IP Address is 10.1.10.158 => Mon Aug 4 13:09:49 2008"
So it does appear that the IP Addresses are coming from the wireless router.
All suggestions are deeply appreciated.

It seems that from outside this IP address is trying to access.....
this IP is not from router LAN side... so i think it is fine ....

Similar Messages

Email vacation reply will not disable -- help

My email vacation reply will not disable. I have used both the account management tool and the Settings/Email on the email reader itself without success. In additon I have called and talked at least 3 times with Verizon tech people WITHOUT success. As a result I can not use my verizon account as everyone who emails me gets a vacation reply.
Is there any Verzion tech guy or gal reading these message who can REALLY help.
Thanks

Go to: www22.verizon.com/foryourhome/myaccount/protected/account/myaccountprofile.aspx.
Go to the Verizon Email Address section, and click on "Settings" on the right side.
A menu will pop up that has Vacation Reply as a clickable option.
Click on Vacation Reply, and you should be set.
I completely agree that it's almost impossible to know that intuitively. I discovered it this morning while trying to disable my vacation reply. Hope this helps.

HT4314 Game Center will not connect and will not disable in Hayday, even if I am connected in the game center app

I cannot get connecting to Game Center except periodically. When playing Hayday not only will it not connect it will no disable either so it pops up so often you just can't even play the game. It happen on another game that is connected to game center also. I will not get involved with any other game that requires game center at this point if it cannot be fixed. I already changed my password with is a major pain and now I have this long password and before I had a short one.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

When i press fn+B key for enable/disable Beat Audio feature , it will not disable the beat audio

When I make my HP Recovery Disc it will not work..
Can you please send me a recovery disc for my Notebook..
as soon as possible.

When I make my HP Recovery Disc it will not work..
Can you please send me a recovery disc for my Notebook..
as soon as possible.

DHCP Will Not Configure

Today, my macbook stopped connecting to wireless networks via DHCP. Whenever I select DHCP for the AirPort connection, the computer automatically switches to "Using DHCP with Manual Address." I am a linux network admin, but I don't have extensive experience with mac.
In addition, a simple command line argument, such as "ipconfig set en1 DHCP" sets the interface to DHCP momentarily (ie. 3-4 seconds), but then reverts back to whatever static IP I had set before. Does anyone know if mac has the equivalent of a /etc/networks/interfaces?
Any help would be greatly appreciated.

abradle2 wrote:
Today, my macbook stopped connecting to wireless networks via DHCP. Whenever I select DHCP for the AirPort connection, the computer automatically switches to "Using DHCP with Manual Address."
Welcome to Apple's discussion groups.
It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
They may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.
Does anyone know if mac has the equivalent of a /etc/networks/interfaces?
There is a file called /etc/networks, but on my Mac it only contains a loopback entry. The files in /Library/Preferences/SystemConfiguration may be the closest that you'll get on a Mac.

Elite Book 8460p - touch pad will not disable

Hi everyone,
I work on the helpdesk of a company and one of my users has been having an issue. He has an Elite Book 8460p and just recently started having issues with the touchpad on his computer. When he double clicks the upper left corner of the touchpad nothing happens. I have tried uninstalling and reinstalling the drivers for the Synaptics Touchpad twice, with drivers directly from the HP site. I have also switch the user's hard drive to another 8460p but the same issue happens.
I have attempted to disable the touchpad in the Synaptics Device Options under the Mouse section in the Control Panel. After I hit the Disable button, it does turn the touchpad off for a time, but it seems to turn itself back on randomly. I would disable it, apply and hit OK to close the windows, test the touchpad and it would reenable itself. Has anyone else seen a problem similar to this? I was hoping there was a way to disable it in the BIOS, but I did not see anything.

Hello Clownmaserfunk,
In order to get the best and most accurate response for your question, please submit your question onto the HP commercial forums. You have posted on the consumer forum, and you're using a commercial based system. The link below will allow you to submit your question. It is possible that you might have to create another profile.
EliteBook Fourm
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Encapsulation SLIP will not disable.

I have a Cisco 3845 that has sync and async circuits connected via serial ports.
When we attempted to cutover to the new routers from the older 2600's we were using, the sync circuits came online without a problem. The async circuits, however, did not. The only change on the configurations of the new routers is that 'ENCAPSULATION SLIP' is enabled for the async circuits.
We feel fairly certain that this is the cause of our problems. We tried disabling encapsulation on each interface, which is not working. We type 'NO ENCAPSULATION SLIP' and then we go back to look at the configs for that interface, and it is still there.
Does anyone know why it is doing this? If so, how can we fix this problem?
Thank you.

We use it for a custom IS that we maintain.
Basically it is a low-speed circuit that only passes data, not voice, using RLogin.

ICloud keychain will not disable? Can't turn off iCloud???

After updating to Mavricks on iMac and ios7 on iPhone 4s and iPad 2, I tried to enable the new icloud keychain.
First on the iMac. After using it for a few passwords, and trying it, I enabled it on the iPhone 4s. After trying it for a bit, the person I was helping said they didn't want passwords in the cloud...
So.....
I went to the icloud control panel on the iMac and tried to disable the icloud keychain. Each time I uncheck the box, it prompts "Delete from this Mac" "Cancel" "Keep on this Mac". No matter how I answer, it rechecks the box when I click a button.
Then I tried to logout of the iCloud account. It prompted me to disable each of the features. It got to keychain, then said something to the effect "disable all icloud items before logging out". But it won't let me disable keychain?
Suggestions?

Have you seen This:
https://discussions.apple.com/message/23511969#23511969
If not, it could be that since so many apps. use ICloud, (ICAL, Mail, Safri, etc. you might have to go into each of them & disable? As I posted in earlier, try examining the login Items directly in Keychain Access App. (use the spotlight) ...but be careful, copy the passwords & attributes into a text editor b4 making changes. If you do not have the "other person's" system Log In, then you cannot proceed.
I do not use ICloud & I am waiting to make at least 3 months to change to Mavericks as well. When somthing isn't broke...
Good Luck

Autoplay will not disable

Any one have an idea how to REALLY turn off autoplay?
In Dreamweaver 8 I have unchecked both the Loop and Autoplay
properties. AND in Flash I have set the FLA property "autoPlay" to
"false". And even with all the false values the file still plays
automatically when the page is loaded. The help topic says that the
html property values for autoplay will be over-ridden by the fla
property if that fla property is "true". But even when I change the
fla "autoPlay" property to "false" - it still plays automatically
everytime the page loads.

This may be an insult to your intalegence yet have you placed
a stop(); command on the first frame of your fla document?

Clear form will not disable invoking button

Hi All,
I wrote a procedure to clear all my text fields and disable all buttons. And I call this procedure in a button (insert button). when I presses the insert button, after my button operation, all he text fields get cleared and all my buttons get disabled, except my insert button. I do have code to disable this button in my procedure as well. But for some reason, every other button gets disable except the button which invoked the procedure.
Is there a way to disable the invoking button as well ?
I did try using the clear_form functionality available in the Oracle Forms by default, but no use.
Regards,
Aj

I guess the problem is that the insert-button has the focus when you try to disable it. You cannot disable the current item.
You would have either to navigate to another item first or set the properties "Navigable" and "Mouse Navigable" to False.
Try something like
GO_ITEM('BLOCK.SOME_ENABLED_TEXTITEM');
SET_ITEM_PROPERTY('BLOCK.INSERTBUTTON', ENABLED, PROPERTY_FALSE);

Computer deletes installed programs at will, will not delete others, they return at the next log-in

Computer deletes installed programs at will, will not delete others, they return at the next log-in. Some programs or hardware continue to operate even though you can't locate the programs or files on the computer. Will not disable some features when asked to.

hello Ebenholmes, is this affecting your whole pc (in this case the problem is probably beyond the capabilities of the forum - you might have to install & setup your operating system from scratch again) - or is it only a problem within firefox? in the latter case please refer to [[How to fix preferences that won't save]], especially the part about the user.js file within your profile folder....

New 2008 R2 DHCP server will not hand out IP addresses

We've recently migrated our Domain Controllers to 2008 R2, Virtual Machines. (DC3 & DC4).
DC2 is an older 2003 box, 32 bit, set for retirement. All former roles have been moved to DC3 & DC4, including FMSO roles, and the server (DC2) has been demoted. The only service that remains on DC2 is DHCP.
I've used NETSH to export / import the DHCP info to DC4. All reservations have transferred ( Printers) and the scope shows "active" on DC4 and authorized, and running, but whenever I shut DHCP down on DC2, DC4 doesn't start handing out
IP addresses to clients.
Even after rebooting a client multiple times, running ipconfig /release & /renew, it never finds the new DHCP server, nor does the server show any client information in the address leases. (other than reserves)
We have a Cisco ASDM deployed, but DHCP and DNS are both disabled on this device, so I'm not sure IP Helper would be an issue here.
Since both my new DC's are 2008R2, do I need to elevate active directory up to 2008 function before DHCP will work?

Hi,
Is the issue resolved? As suggested by
Wyatt Miller, you can check if it was caused by IP helper.
In addition, is the new server authorized?
Here is a migration guide for you:
Migration of DHCP Server from Windows Server 2003 to Windows Server 2008
http://blogs.technet.com/b/teamdhcp/archive/2009/02/18/migration-of-dhcp-server-from-windows-server-2003-to-windows-server-2008.aspx
Hope this helps.

Ipad will not connect netgear router, even with encryption disabled

Evening everyone, I own a first generation iPad which I got at the beginning of this year, and up until 2 days ago, everything was working fine.
I have Netgear router issued by Sky which I have owned for a few years and I have owned an iPhone 3GS and I am now onto my iPhone 4, along with 2nd generation apple TV alongside my iPad.
On tuesday, my iPad stopped connecting to the internet over wifi. I have entered the password for the network, I have restored my iPad, and I have also disabled the encryption and still it will not connect.
Now last night, I manually entered details under the Static section near DHCP and suddenly it worked. I have also been to visit the Apple store at the Trafford Centre this evening and simply got told it must be something to do with my router. yet I am at a loss as to why my iPhone 4 works with no problems, as Steve Jobs says, "it just works" yet my iPad doesnt.
Can anyone help me on this one????

Thank you very much, I have now reset the router after logging in and seeing all my other devices working fine. Everything is now working, just totally surprises me that my iPhone, laptop, my mums laptop, my apple tv box would all still connect and work no problem at all.
Can anyone answer as to why this sort of things happen with routers????? My line of thinking would be that if one product can't connect, then surely the others wouldn't be able to either???. I may be totally way off beam, but this is an area where I have little knowledge.

My Iphone will not let me download apps because it says my apple id is disabled, I have changed my password four times and it still is saying the same thing. What do I do now?

My Iphone will not let me download apps because it says my apple id is disabled, I have changed my password four times and it still is saying the same thing. What do I do now?

Contact iTunes to re-enable your account at expresslane.apple.com
You can reach them by chat or email.

Hallelujah, finally disabled OOPP. I use Firefox 9.0.1 and will not upgrade to anything that ignores my settings. Been looking for this info for years!

As soon as Firefox came out with OOPP, I immediately asked how to permanently disable it and had a Firefox developer straight-up lie to me and say it couldn't be done without downgrading. Thank GOODNESS for the instructions on https://support.mozilla.org/en-US/questions/713600?page=1 Finally, finally I have excised the hated OOPP!
I run Firefox 9.0.1 and will not upgrade, ever, unless I see signs that Mozilla has radically altered its development direction and discarded most of the boneheaded, broken, anti-user development that has gone into versions more recent than Firefox 1.x. Actually making your mission statement more than an empty promise might be a good place to start.
Let's see...anything else? Oh yeah, any developer who advocates overriding or ignoring user settings, or taking control away from the user, should be kicked off the team. (and investigated as a possible Government mole, but that's a lot to ask for). I hear Konqueror and Safari are looking for new devs. It gets old fast when you try to get support and instead get haughty "You're doing it wrong, stop doing that" responses. I'm doing exactly what I intend to be doing and if you can't support that, someone else will. If you really gave a damn about your users, you might start by backporting security fixes to previous versions instead of spewing out a cacophony of incompatible new versions so rapidly you end up confusing and alienating users and making them switch updates off entirely. I mean seriously, what happens when Firefox hits triple digits? You could stick a decimal in front of it, and name that build after a historic baseball player who had that batting average. But even then you will run out of players in a few months.
It's truly sad. I switched to Firefox because it was the best browser. But Firefox has been backsliding horribly since around 2.0, and the other browsers seem to be in about the same boat. Firefox IS still the best browser - but only if you use an ancient, unsupported version. That's a big problem.

Using an obsolete version released [http://www.mozilla.org/firefox/9.0.1/releasenotes/ December 11th 2011] is the exact definition of downgrading. It exposes your system to all the security vulnerabilities that have been fixed since then.
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html
Out-of-process plug-ins was made mandatory on Windows Vista and later because Adobe don't test Flash Player's protected mode with OOPP disabled. This change didn't happen until Firefox 14, so there was no need to go as far back as Firefox 9.0.1.
If you absolutely have to, you can disable OOPP by creating the ''MOZ_DISABLE_OOP_PLUGINS'' environment variable and setting its value to '''1'''. Firefox must be restarted for the change to take effect. This works in the current version of Firefox, so there's no need to use obsolete insecure versions.<br>
If you don't know how to create an environment variable, see the following article for instructions (the "Using the Custom Environment Variable" section is not relevant).
* [http://www.howtogeek.com/51807/how-to-create-and-use-global-system-environment-variables/ How to Use Global System Environment Variables | How-To Geek]

DHCP will not disable

Similar Messages

Maybe you are looking for