DHCP with manual address doesn't work

My ISP has decided that they won't support static addresses for the
DHCP servers anymore. I'd really like to keep static IP addresses, so
I tried using the "DHCP with manual address." Unfortunately, it
doesn't recognize my Router which is serving DHCP. What's busted here?
Is it Tiger or is it my router (old mansesnse MIH-130).
Any help is appreciated.
thanks.

Comcast I believe is a cable connection.
Interesting, I found that if I continue to manually configure the
TCP/IP settings and just point the DNS to the router (192.168.1.1),
all works perfectly. This worked for 10.4.5, 9.2 and Yellowdog Linux as well.
When you say your isp is no longer using static ip addresses this only affecs your WAN ip. Setup your router to receieve internet via DHCP.
Your LAN ip addresss won't change. You can give all your macs static ip addresses if you like. It does not affect your WAN IP.

Similar Messages

  • I'm hooked up to the ethernet using DHCP with manual address. It's running (green) but my internet (Safari, messenger, email) doesn't work! Help!

    I'm running an iMac with Mountain Lion. Not only do we do accounting work on this computer with AccountEdge, but the computer functions as a server to another computer in a different state.
    Anyway, I set a static IP address (Using DHCP with manual address) on it (to allow for a VPN to the computer in the different state) and it is connected (green dot) - meaning that the other computer in the different state can connect to us via that ethernet line - but for some reason Safari, Messanger, and Apple Email won't work.
    But if I switch a dynamic IP (DHCP auto), I can use the internet (Safari, messanger, email), but the computer in the different state can't connect to this computer.
    How can I fix this so that the computer in the different state can connect to this computer and that the internet (Safari, messanger, and email) can work at the same time?
    Much thanks!

    No but if they are using a VPN Tunnel for the connection that restricts all internet traffic over the tunnel. Which means you can't use that same computer to broswe the internet or connect to other computers or devices on your LAN.
    I'd need to see the actual setup, router and the IP addresses you are using.
    Networking and remote networking is fairly easy when you are in front of the systems you are working on. Doing it over the internet on a forum is almost impossible. Tha is why I suggested you get local help, like the person that originally set it up.

  • Leopard : Network : Unable to use DHCP with manual address.

    After installing Leopard on my Macmini (PowerPC 1.42Ghz, 1GB RAM, 80GB HDD), I found my IP address obtains different IP address than Panther and Tiger use. Then I go into System Preferences -> Network -> select Ethernet -> select "Using DHCP with manual address" in the "Configure" combo box, and change the IP address from 192.168.0.8 to 192.168.0.100. Once I hit apply, the network connection never comes back. There is no complaint that another computer is using the 192.168.0.100 IP address. This works if I am using Panther or Tiger on the same computer.
    Any help is appreciated.

    Setting the DHCP to a number you want to use can be very useful in a busy environment. I usually choose to use numbers that are outside of the range of numbers being controlled by my router (Westell).
    Port Forwarding for services like ARD, Azureus, or any server application break when the IP number changes for any reason.
    Some routers will not allow numbers outside of a restricted range of numbers that can be set up in the router configuration menu's. In this case, I find out if the router is assigning numbers from the high or low end and make sure I assign numbers at the opposite end of the range.
    My Westell router does allow me to use numbers other than the range of 50 numbers it has been told to use for DHCP, but I have also encountered problems when trying this on a wireless connection.

  • Network setup 'DHCP with manual address' changes to 'Using DHCP'

    I have setup my local network with a manual address and have observed that the setting changes without my doing to simply Using DHCP. I can't get the setup to continue using a manually assigned ip address. Even though I've saved the network settings preferences, they revert to 'Using DHCP'. Any ideas? Thanks in advance.

    If you "have setup (your) local network with a manual address," does that mean you have disabled DHCP in your router? If so, then you'd want to configure "manually" in your Sys Prefs > Network.
    Or did you mean that you have setup a computer on your local network with a manual address using DHCP? (And that your router has DHCP enabled?)
    If the router's DHCP is enabled, many routers will allow you to set aside a subset of IP addresses to the DHCP pool, and the remainder are, by definition, reserved for static addressing. Are you assigning the computer requiring a static IPA (but using DHCP defined gateway and subnet) an address falling within the static address range of your local subnet?
    If you can't partition the address space between static IP addresses and DHCP-assigned IP addresses when DHCP is enabled, are you assigning a high-numbered IP address to the computer whose Sys Prefs has DHCP with manual address?

  • Keynote Movie Export with Manual Advance doesn't work posted on MobileMe

    Hi,
    After exporting a Keynote Presentation to Quicktime with Manual Advance function checked the Manual Advance function is working perfectly.
    However, after I post the same Quicktime movie on my Mobile Me gallery (or a webpage via iWeb) the Manual Advance only works on slide 1 taking it to slide 2.
    When I click to advance at slide 2 it returns to slide 1 instead of going to slide 3...
    Any suggestions appreciated.
    Thanks in advance,
    Clayton

    This could be the old bug that causes this if the movie wasn't fully loaded. Try waiting till the movie fully loads (if it's not showing a progress bar, just wait a few min as it will probably load fully in that time). Then try it again. In my tests with older versions (haven't tested 09) this was the case...clicking on anything before the movie fully loaded sent you back to slide 1.

  • Proxy client (over USB connection) with DHCP assigned IP address doesn't work with FRDM-K64F

    Hello,
    after reading about the issues on this forum with a static IP address on the Freescale FRDM-K64F board I went for an DHCP address but I can't get the proxy client to work over a USB connection with DHCP either.
    My console tells me the following:
    RTC Time: Wed 2014-01-01 00:07:27
    Network initialized
    IP Address:      10.143.xxx.yyy (xxx and yyy is real numbers, just changing them for the forum to letters)
    Subnet mask:     255.255.252.0
    Gateway:         10.143.xxx.yyy
    MAC-address:     00:0c:00:06:70:00
    And when I try o to connect with the following command :
    java -jar proxy.jar -socket 10.143.xxx.yyy
    I get the following output and no CLI interface:
    Trying to open socket connection with device: 10.143.xxx.yyy:2201
    Connected to the socket: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]
    Open channel 8 with hash 0x130399b3
    Channel 8 CLOSED -> OPENED
    notifyResponse AVAILABLE_RESPONSE on channel 8
    Channel 8 OPENED -> AVAILABLE
    Open channel 9 with hash 0x0
    Channel 8 AVAILABLE -> REQUEST_SENT
    notifyResponse ACK_RESPONSE on channel 8
    Channel 8 REQUEST_SENT -> ACKNOWLEDGED
    Channel 8 ACKNOWLEDGED -> DATA_SENT
    notifyResponse AVAILABLE_RESPONSE on channel 8
    Channel 8 DATA_SENT -> AVAILABLE
    Channel 8 AVAILABLE -> REQUEST_SENT
    notifyResponse ACK_RESPONSE on channel 8
    Channel 8 REQUEST_SENT -> ACKNOWLEDGED
    Channel 8 ACKNOWLEDGED -> DATA_SENT
    notifyResponse AVAILABLE_RESPONSE on channel 8
    Channel 8 DATA_SENT -> AVAILABLE
    Channel 8 AVAILABLE -> REQUEST_SENT
    notifyResponse ACK_RESPONSE on channel 8
    Channel 8 REQUEST_SENT -> ACKNOWLEDGED
    Channel 8 ACKNOWLEDGED -> DATA_SENT
    notifyResponse AVAILABLE_RESPONSE on channel 8
    Channel 8 DATA_SENT -> AVAILABLE
    Channel 8 AVAILABLE -> REQUEST_SENT
    notifyResponse ACK_RESPONSE on channel 8
    Channel 8 REQUEST_SENT -> ACKNOWLEDGED
    Channel 8 ACKNOWLEDGED -> DATA_SENT
    notifyResponse AVAILABLE_RESPONSE on channel 8
    Channel 8 DATA_SENT -> AVAILABLE
    Channel 8 AVAILABLE -> REQUEST_SENT
    notifyResponse ACK_RESPONSE on channel 8
    Channel 8 REQUEST_SENT -> ACKNOWLEDGED
    Channel 8 ACKNOWLEDGED -> DATA_SENT
    notifyResponse AVAILABLE_RESPONSE on channel 8
    Channel 8 DATA_SENT -> AVAILABLE
    Channel 8 AVAILABLE -> REQUEST_SENT
    notifyResponse ACK_RESPONSE on channel 8
    Channel 8 REQUEST_SENT -> ACKNOWLEDGED
    Channel 8 ACKNOWLEDGED -> DATA_SENT
    notifyResponse AVAILABLE_RESPONSE on channel 8
    Channel 8 DATA_SENT -> AVAILABLE
    Channel 8 AVAILABLE -> REQUEST_SENT
    notifyResponse ACK_RESPONSE on channel 8
    Channel 8 REQUEST_SENT -> ACKNOWLEDGED
    Channel 8 ACKNOWLEDGED -> DATA_SENT
    notifyResponse AVAILABLE_RESPONSE on channel 8
    Channel 8 DATA_SENT -> AVAILABLE
    Channel 8 AVAILABLE -> REQUEST_SENT
    notifyResponse ACK_RESPONSE on channel 8
    Channel 8 REQUEST_SENT -> ACKNOWLEDGED
    Channel 8 ACKNOWLEDGED -> DATA_SENT
    notifyResponse AVAILABLE_RESPONSE on channel 8
    Channel 8 DATA_SENT -> AVAILABLE
    I don't know if this matter but my java version is:
    java version "1.8.0_31"
    Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
    Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
    Any ideas or am I missing something completely?
    Thanks
    Andy

    Hi, Andy. Please excuse my ignorance, I am very new at this ME embedded stuff. I had my challenges, but was finally able to get my board up with a static address. I went through a lot of headaches, but finally got the board flashed with the latest bin. I then updated the jwc_properties.ini file on the SD card to include:
    # Whether static configuration or DHCP server is used do get IP address. Possible values: dhcp,static
    ip.method = static
    # IP address,used with static IP configuration only
    ip.addr = 192.168.0.30
    # Network mask,used with static IP configuration only
    ip.netmask = 255.255.255.0
    # Network gateway,used with static IP configuration only
    ip.gateway = 192.168.0.1
    # DNS server,used with static IP configuration only
    ip.dns = 208.67.222.222
    # MAC address
    mac.addr = 01:02:03:04:05:06
    I was then put the card into the board, disconnected both USB cables, and then powered it up. From that point I was able to ping the board. I can now use Device Manager in NetBeans to connect to the device.
    I am struggling quite a bit with many issues. It seems that when I try to stop the app from NetBeans, the "please wait" dialog hangs forever. I have to use Windows Task Manager to kill the "JavaW" process tree and reconnect the board.
    I have also had trouble understanding the GPIO pin assignments. Another gotcha was trying to use the AutoStart feature. Since the sample app never cleanly exited, I thought that I bricked the board. The secret is to power it down, remove the SD card, and then delete all files EXCEPT the jwc_properties.ini file, put the SD card back in, then power up. It seems that the board forgets that the MIDlet was installed.
    Hope this helps others out there.
    Please everybody, post your experiences here. There seem to be very few of us, and finding pearls in the dust is rare right now.
    Regards,
    Pete

  • ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

    iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

    Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
    For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
    System:
    Windows 7 Ultimate x64
    iTunes 10.4
    ATI 5750 video card

  • LAN with TCP/IP doesn't work

    Hello,
      I have a problem with my laptop IdeaPad S10e 4187-5PG: LAN with TCP/IP doesn't work, after I have updated all the drivers to the latest ones form the Lenovo site (except BIOS update). I tried to check if LAN worksby sending a ping to the IP address and that is OK, but when Isend a ping to the default gateway it failes. A ping to the DNS server also fails.Could you please help me because I tried everythinh and I can't getthe LAN to work.
    Thank you very much

    Perhaps you could describe you network in a little more detail.
    Is this a Workgroup home network or are you connected to a Domain server?
    If this is a workgroup are you connecting to the internet via a cable or DSL router?
    Do other computers on your network connect OK?
    Has your S10e ever worked properly on the network?
    Are you connecting via a wireless access point or LAN cable? 
    What do you Ping on and from where?
    Can you Ping OK on another networked computer?
    Open up a DOS Prompt (aka command prompt, DOS Box). and type IPCONFIG  /ALL <enter>. Do you get a compatible IP address and subnet mask? You should also get the gateway IP address.

  • Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone.  What can I do to stop this from happening?

    Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone.  What can I do to stop this from happening?
    I have tried deleting the account and it deletes all my contacts.  I have verizon and even using back up assistant, it says the contacts are there but they aren't.  The only way i can find a contact is if I start to type a name in and new text but once i sent the new text, the name disappears and it just shows the number.  Siri nor the address book don't recognize any contacts at all.

    I cant find any reciept in my email or in my husbands email.  I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!

  • Why tethering with USB cable doesn't work after IOS6.0 update?

    why tethering with USB cable doesn't work after IOS 6.0 update?

    Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

  • In day 4, video # Creating "pages" with Flex states doesn't work

    i can't open video training http://www.adobe.com/devnet/flex/videotraining in day 4. it's name( Creating "pages" with Flex states ) doesn't work, it report error. supporter can look it and solve problem

    Hi,
         I'm also pacing the same issue. if click on the video in the Day 4 exercises. i don't know, what is the issue with that particular videos. and also pacing one more issue that design mode is not showing in my flash builder 4. if u have any ans plz help me out. PFA

  • Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

    Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

    More information please.
    Version of Reader? OS?  Can you open reader by double-clicking on its icon? Can you open reader by double-clicking on a pdf file? What programs are trying to open reader? Some programs might be restricting your ability to view pdf files using the Reader plug-in due to security concerns. If this is the case you need to find out how to enable the plug-in in the case of each application.

  • Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

    Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

    Hello lila54,
    It sounds like your Wi-Fi network is working if your desktop works with it, we just need to get the Wi-Fi on your iPhone and iPad connected to it.  I found a couple of resources to help with not being able to connect to Wi-Fi on an iOS device.
    I recommend following the steps in this tutorial first (the steps should work on the iPhone and iPad):
    Join a network
    http://www.apple.com/support/iphone/assistant/wifi/
    If you are still having trouble connecting to Wi-Fi, follow the steps in this article (you can skip any steps you have already taken):
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • How do I log out of icloud on my iphone when my password or email recovery address doesn't work?

    I switched my email address to a more current gmail one (which works as my apple id) from an old hotmail one. It switched my apple id over, but it didn't switch my icloud email over. Now the hotmail account is gone, the old password doesn't work, and I can't log in to icloud with my current gmail one. I can't delete it becuase the password doesn't work. I can't even wipe my phone out and start with whole new accounts because I can't turn off 'find my iphone'! 

    What it says is that Photostream photos will be deleted on your phone & any documents stored on the phone will be deleted...that's the way it works. If you want these photos, you need to save them first. For contacts, calendars, etc., you'll be asked if you want to keep on the phone or not.

  • HT1688 The friend brought to me from the USA iphone 4. I can't use it at all. It with our operators doesn't work. I very much ask you help me to solve a problem.

    The friend brought to me a gift from the USA, and it doesn't work year. Our operators don't understand it. Help me to unblock iphone4
    <Edited by Host>

    This has nothing to do with iPhones in the Enterprise.
    Sounds like your friend is a bit dumb and bought a carrier locked iPhone.  The only way to address this is to contact the carrier to whom the device is locked and find out their unlock policy.
    Oh, and stop being dumb yourself, posting IMEI, serial numbers, and email addresses on a public forum is just plain stupid.

Maybe you are looking for