DhcpV6 will not answer to OtherStatefull requests if no scope configured

Hello,
Question 1.
Just figured out that a (WS2012-R2) DHCPv6 server will not reply to DHCPv6 SOLICIT requests if only IPv6 SERVER OPTIONS have been configured. Even so the clients are instructed to request only "OTHER STATEFULL" options. In this case, the server
options might be sufficient because it concerns any client hat makes a request. No?
By configuring an unnecessary scope, the DHCPv6 server will reply to DHCPv6 SOLICIT requests for the above clients and sends the OTHERSTATEFULL DHCPv6 options... Why is this so?
Question 2.
...BUT also hands out addresses from that scope to clients that does or does NOT request anything. Clients that have their Ethernet adapter configuration set to ManagedAddress=DISABLED & OTHERSTATEFULL=DISABLED receive a full IPv6 configuration for that
interface. I do not want this. How can this be stopped?
Thomas.

On Wed, 09 Jul 2008 10:36:01 GMT, d1ngetje wrote:
> - DHCP and PDHCP are on different machines (DHCP is on windows) so no
> option 60 is set.
this should be wrong as the message ProxyDHCP service did not reply to
request on port 4011. only shows up if that option is set.
Marcus Breiden
If you are asked to email me information please remove the - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.didas.de

Similar Messages

Mail application will not answer

Mail application will not answer.
Lately I tried to solve a problem concerning Scandinavian letters. The thing is that Scandinavian letters in 'rich text' with Tiger Mail sometimes show up like Chinese signs or reversed questionmarks in Windows-recipients' mail.
Tom Gewecke explained it is due to two bugs in mailprogram in outdated MS Outlook.
I did what suggested. One of the suggesstions was to set Mail's default encoding to UTF-8. To do this I had to open Utilities/Terminal and type:
'defaults write com.apple.mail NSPreferredMailCharset "UTF-8"'
I also put in a dingbat character in every mail to WIN-recipients, which was another suggestion to force MS Outlok to identify and use UTF-8.
This may have solved the problem so far. I think so.
It may be a coincidence. But after a day or so my Mail app. have troubled me ever since.
The application will not answer. It will not show the mails in the mailboxes.
I can't read og send mails. I can't quit the application, but have to force-quit
The connection to the internet is OK. Window/Mail-doctor shows there is connection to the internet. But in the Window/Activity the view shows that the activity is blocked.
Please, anyone?!

Hi again David.
Thankyou for you support so far. Had to sleep and do stuff … problem transformed:
1. Quit Mail if it's running.
2. Move the entire Mail folder out of
~/Library/ -- be sure to not overwrite the
backup copy you did before.
3. Open Mail. If any of your POP accounts is
configured to remove messages from the server right
away, either tell Mail to go offline immediately
after opening it, or shut down your Internet
connection before opening Mail. Then, configure the
account to leave Mail on the server for some time, so
that we can later get rid of the newly created Mail
folder without losing anything.
Post back with your observations.
:: I have done the three steps.
:: Then I moved back all my original mailboxes to the Mail-folder just to find out that all the messages in them will not load in Mail app. when I open it. I have all my original named mailboxes visible in Mail, but the content of messages will not show.
:: Other features in Mail are now at work: it opens and closes, I receive, send etc.
:: In ~/User/Library/Mail/Mailboxes on the other hand I find all the earlier recorded messages as .emls-files. But they don't show in Mail app.
:: Then I startede to import my messages from a copy of the removed and back-moved Mail-folder now placed on my external HD. This is extremely slow. Mail app. crashes again and again. Maybe because I have a huge pile of messages (more than 30.000).
:: If I divide each of Message-folder in my Mailboxes in the Mail-folder into smaller portions of messages I can succeed in importing them, 5 by 5 or 10 by 10. This off course is very, very time-consuming.
:: Lately the Import-folder generated by import in Mail app. disappeared! Again and agian it does not show by import. So I can't use this feature at the moment. Why does it disappear?
:: So how can I make the messages — which are present in the in ~/User/Library/… — visible in Mail app. again?
:: How can I make a better record and archive-system of my messages, maybe year by year (without having to save each one of them as RTF-files)?
Thankyou,
riprap

Facetime keeps connecting but will not answer

facetime will connect on ipad but will not answer - "facetime failed" message comes up.
does anyone know why?

Read this and see if it helps
http://support.apple.com/kb/TS5419
After april 16 all devices using facetime must be updated to a certain level to work

Okay, noe this is stupid, HTC ONE MAX RECEIVES sENSE 6 UPDATE IN Malasia yet we cannot get it here in the use on verix=zon, last gain and it has been in certification as long as EVERY OTHER HTC out there!!!! So verizon i know you will not answer this a

okay, noW this is stupid, HTC ONE MAX RECEIVES sENSE 6 UPDATE IN Malasia yet we cannot get it here in the use on verizon, last Again and it has been in certification as long as EVERY OTHER HTC out there!!!! So verizon i know you will not answer this anyways cause your just too good to answer it , but WHEN ARE US LOYAL CUSTOMERS GETTING OUT SENSE 6 UPDATE ALREADY???????

its been 3 months now for certification process. I think we will receive this update for Christmas.Verizon really dont care about htc one max users. Dont lose hope htc one max users we will see this updates in our phones. i posted a picture conversation between me and htc. they said its verizon who releases updates for us not them, they delete my post i am sure 100% there is something going on with this update. they just dont tell us.

Airport extreme software will not install on vista, how can i still configure the router?

airport extreme software will not install on vista, how can i still configure the router? Trying to help someone with vista get an airpot extreme configured. 10.0.1.1 does not work, the software will not install correctly on their vista machine. How can I get into the base tation and lock it down?

Hi - Vista can be tricky - I need more info to see if I can be of some help - first, is the Vista machine a desktop or a laptop and is it fully up to date with Windows Update (sp2 or higher)? - next, are you trying to install Airport Utility version 5.5.3 which is the correct one for Vista? - and finally, what do you mean "it will not install" - what kind of error messages or evidence are you getting?

Opening a new URL, a blank page appears with 2 messages on the top left and right corner of the window: "Advertise here" and "Skip this ad" and it will not go to the requested site until I push "Skip this ad"

It would be nice to have the possibility to attach a print screen or something to give you a better idea what is happening and how it looks like.
Anyway, what I described above is accurate:
- the address bar shows the link where I wish to go
- but the page loaded is blank with these 2 hyperlink messages ("Advertise here" in the top left corner, and "Skip this ad" in the top right corner).
I would like to emphasize that it does not have to do with the requested URL: it does the same thing with all sites, all the time.

For me is the same, it's yet 6 months.
the blank page apears for the first 20-30 of the day's navigation, then no more.
For example: If I open firefox at 9 a.m., it appears until 9.30 more or less. If i surf the web until mignight, at 00.01 a.m. this page starts bugging me.
I have yust to click on the link "skip this ad" to return to the desired web page.
Using Adblockplus and NoScript plug-ins had sadly no effect.
I've read somewere that the ploblem should be an f**** adware called "directCPV"., and that the solution is toremove an .exe file called Directcpv.exe or somewhat else, but in my pc I haven't found any of those linked to this adware.
I tried a full system scan with an antivirus (McAfee), with Malwarebytes, Ad-Aware, ATF cleaner, Spybot, Exterminate-it but NO RESULTS.
I tried to do this in safe mode too.
No way cleaning the cache, temp files, cookies etc.
finally I tried to uninstall Firefox (cleaning all registry entry too) and reinstall it, but the problem is still there.
The only cure seems to be formatting the HD, but it's very last chance.
If someone have an idea, please post it here.

My iPhone will not answer calls

my iphone will only work using facetime

Hey there sinde,
It sounds like you are getting calls but cannot answer them. I recommend the troubleshooting from the following article for you:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Will not answer calls - intermittent

I hear a call, touch the answer button and it keeps ringing; touch the answer button again and it sends the caller to answerphone. How do I cure this? Sometimes it then tells me that the device is locked and nothing will unlock it. I have to switch off remove the battery and sim and start over to get it to unlock. Is it something I have done or set up wrong? I feel stupid. Please someone help. George

Hi georgedb,
Welcome to the support community!
To resolve this issue, please try to first back up all your data using the BlackBerry® Desktop Software and then perform a clean reload of your BlackBerry® Device Software. For further steps, please see the following KB articles.
For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
Please test to make sure the issue has been resolved before restoring any data from your backup file.
Let me know if that helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

4Gb LTE jetpack: Need help as CS at Verizon will not answer questions

Husband got this for a friend and now we are stuck with it for 20 more months. He assumed that he was renting it and could turn it back in after the friend left... Have router at home so really do need it but thought if I have to pay for it anyway, then why not use it at home for my router and do away with home line and router service through phone company....Makes sense, right???? So I called Verizon to try to figure out how this things data usage works and they stated they did not know...So I am asking you a couple of questions before I make this move from grandfathered home line service....I do a lot of comparison shopping online, email, financial, download pictures and send to be processed and printing. Have never played internet games or downloaded movies.
1. Can I link my brother wireless MFC4860DW printer to this jetpack and it print? If so, how do I do it?
2. If I am not printing or online, am I using data? I have a 4GB olan and Do not want to go over....
3. Should I unplug it each time I log off the computer?
4. If I were to forget to unplug, is it using my alloted data plan?
5. Should I change the password?
6. Is there anyway you can get out of this contract with Verizon?
7. If you can think of anything else that I have not asked, please advise...

You may want to do a search on this forum, if you haven't already ... there are several threads with other users' asking the same questions you are, current users providing responses, and folks posting issues.

Apple Modem will not answer after Time Machine Restore

After restoring from a Time Machine backup the Apple External Modem no longer answers incoming [fax] calls. I verified all modem/fax settings - they are good and the same as before the restore. The Modem Status in the Menu Bar doesn't indicate "ringing..." when the line is ringing and the Fax no longer answers.
Opening the Console I see these errors repeating endlessly-
9/15/08 10:09:10 AM com.apple.service_helper[1271] com.apple.efax: Already loaded
9/15/08 10:09:10 AM [0x0-0x15015].com.apple.systempreferences[155] No matching processes were found
9/15/08 10:09:27 AM com.apple.efax[1274] /usr/bin/fax: line 537: cd: /var/spool/fax: No such file or directory
I believe the fax app is supposed to create this dir, but I created the dir in /var/log/ as follows:
drwxr-xr-x 2 root wheel 68 Sep 15 10:33 fax
Makes no difference, rebooted, still makes no difference, ran disk utility to see if it would change permissions, no it didn't - still getting the errors, so there's something else that's also missing after a restore, or the error message is erroneous since the dir now exists.
It appears a Time Machine Restore - doesn't restore all that's needed for the fax subsystem to work. I thought the restore was supposed to completely restore the volume to previous operating state?
Any help on this would be great, I now have no incoming FAX - one of the main jobs of this Mini - thx - KR

By the way, it's running OS X 10.5.4

Calling iphone 4 in facetime will not answer

I have an I-mac running Lion. I have logged into Facetime. I called my wife's iphone 4 at home so I know it is on a wireless network. It rings and rings on the mac but the Iphone never does anything.
What am I doing wrong?

http://support.apple.com/kb/ht4319

8600plus (OS X) will not accept print request from the registered add at hpconnect

HP 8600 plus OS X, will not accept a print request from the registered address at hpconnect but will print a request from the address that comes on the printer. I have tried to change the factory settings and i get a message from Hp connect that there is a printer error.

Hi Bill,
Bit of a strange error, I would recommend calling HP's team - they helped me out with my printer, and were very good:
HP Connected
ePrint
Instant Ink
Scheduled Delivery / Printable with automatic printing 855-785-2777 8am - 11pm EST Mon. - Fri.
10am - 6:30pm EST Sat.
U.S.: English (from link http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1)
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

ITunes quits unexpectedly and will not open. The coloured disc just spins. Is there a solution?

I tunes will not respond to my request for access. I get a message which says that I Tunes closed unexpectedly. I there a solution?

Care to share which OS version you are using? Which model Mac?
Check out: Troubleshoot the spinning beach ball/freezing & crashing ===================When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***

Memory stick contents only briefly display and will not open

Model: Laptop C660D-102
Purchase date: 07/11/2010 - used very little and on very rare occasions, so virtually unused.
Problem: When a memory stick is inserted into either of two usb ports it will not open up on request, although I can see it listed in "Devices with Removable Storage" where it appears very briefly at regular intervals of about 10 seconds. The only occasions when It is available to open is when the laptop is initially switched on but even in this instance it reverts to its regular disappearing act after about 5 minutes.
Is anyone familiar with this scenario.
Regards

Is this with multiple USB sticks, or are you only checking one? Likewise, does it work on other machines?
Also, is that a model from the UK? You might try checking their support page.
- Peter

ILife '11/ iphoto will not open

I just recently bought my new macbook pro in january 2011 and i am trying to open iphoto, however it will not open because
it requests to be updated by going to Software Update...
I did that and it still won't open. So i've tried running the Software Update again but it says everything is up to date.
I need to use iphoto to put photos on my iphone but i can't even open it.
Please help!

Have you moved iPhoto from it's original location? Put it in a folder or something similar?
Regards
TD

DhcpV6 will not answer to OtherStatefull requests if no scope configured

Similar Messages

Maybe you are looking for