DI Administrator not show job log content

Post Author: ineta.lapina
CA Forum: Data Integration
Hello!
We have installed BO Data Integrator 11.7 and also DI Management console. In Administrator we always loking in logs how jobs was processed, but after Job server removing and new adding, I can saw that batch job was runned(in batch job status list), but job log contain only message" Connection refused: connect" (trace/monitor pages) and I can see that it is linked to old job server log files location.
I tested repository parameters, tested DB connection - all are fine. Job server working, jobs running, but logs I can read only when I open Data Integrator Designer.
Before Job server name changes all working fine.
Can you help me to get back normal status here?

The logs are stored in a directory with the name of the job server. Since you changed the job server name the directory accessed does not contain the old job server logs.
I.e. [install path]\Log\[job server name]\[repository name]

Similar Messages

HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

2003 R2 ODBC Administrator not showing mapped drives

When i try to create a new ODBC, and then try to select the database file, the ODBC Administrator not show the mapped network drives.
Can Anyone help me?

Hi Gonzalo G,
What type of data source you are trying to add, did you installed the data source driver and configured the linked server in SQL DB? For File DSN, a data source stored in a file that can be shared among all users who have the same ODBC drivers installed.
These data sources need not be dedicated to a specific user or local to a computer.
Configuring ODBC Data Sources
http://msdn.microsoft.com/en-us/library/ee265698(v=bts.10).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

AppleTV not showing non-synced content since upgrade to iTunes 8.1.0.52

Prior to upgrading to 8.1, my non-synced content showed on my AppleTV (when iTunes was open on my computer). Following the upgrade, the only content showing on the AppleTV is content that is synced to it.
iTunes can see the AppleTV and I can sync content to it. Under "Settings" for the AppleTV I have "Custom Sync" selected and the "Show only synced content on my AppleTV" box is not checked.
Any ideas how I can get non-synced content to show again in the AppleTV?

That's exactly what I did, it took ~20sec to complete the "apply to enclosed items" command (there was heavy disk access), but it does not improve. The permissions stay the same for the files/folders in question. It's very odd, have a look at the screenshot:
Some folders have correct permissions, others (to which I have no access through iTunes) show "admin" twice as the only user who is allowed to write. Repair permission does not help. I have hundreds of files/folders where permissions are wrong, only since the upgrade recently.
http://img4.imageshack.us/img4/33/permission.png
Message was edited by: JJulian (added screenshot)

GlassFish Tools - Eclipse console does not show server log output

Hi,
I just installed the latest Glassfish Tools (6.2.1.201308190137) on Eclipse Kepler and Glassfish Server 3.1.2. But when I start the server and open the console ('view log file' button) there is no output displayed (also not during deployment). When I open the server.log file in a text editor I can clearly see the log output. Re-starting Eclipse, re-opening the console view didn't help. I have this bug both on Windows 8 and OSX 10.8.4.
Is there something obvious that I am missing? In my previous pre-kepler Eclipse installation this works like a charm (using the same glassfish server). Also the path to the log file displayed on the top of the console view is correct.
This might be related to the following thread:
GlassFish > View Log File opens in editor instead of console
Will have to use my old eclipse installation until this is resolved. Any help is appreciated.
-- Mike

Apparently, the GlassFish Tools for eclipse is expecting the log messages in 'ODLLogFormatter' format only, and will refuse to show any logs messages that don't adhere to this format.
I've tried configuring my logback messages to match this format, and that works until an exception is thrown and a log message is entered somewhere using the 'UniformLogFormatter' format, which then causes the server.log parser to refuse to show any more messages.
This is a bug, but I'm unsure where to report bugs now since the move to OEPE. (Was https://java.net/jira/browse/GLASSFISHPLUGINS)

Regarding Job Log Content.

Hi all,
I want to sent the content of the job log through mail for the failed jobs.
Can anybody tell me how to get the content of the joblog in an internal table?
I am able to check the status of the job from the table TBTCO.But unable to
find how the joblog information is being fetched??
Please help me out with this.
Thanks and Regards.
syed.

syed,
you can use the FM 'BP_JOBLOG_READ' passing the client, jobcount, joblogid and jobname. The jobcount and joblogid can be obtained from the TBTCO table for the date/time of the job execution.
the log content is then returned back in the tables parameter 'joblogtbl'.
- Kester

Help..!!!..administrator not able to log in at this time...!!!!!!!!!

hi...all of a sudden when i try with log in with my administrator account the "not able to log in at this time " message pops out...!!!::(((
1) i can log with my secondary user account.
2) i can change setting using my "usual" administrator password...
HOW CAN I LOG AGAIN ON MY MAIN ACCOUNT...!!!!!!
please help...
federico

That link recommends that you delete the troubled account and recreate it, then restore your files from a backup. If you don't have a backup, then your files are lost.
I'll see if I can get some more knowledgeable people here to help, but you may be out of luck.

ITunes suddenly not showing all my content, even though the folder does

All of the sudden, iTunes stopped showing all of my content. I have over a hundred movies and several TV shows and all of the sudden, some of the newer stuff that I recently ripped or bought from the iTunes store is no longer showing up in iTunes.
It is still in my iTunes folder however and open and accessible if I click it in Finder. This however is not a good solution as I don't know what is missing from the list and how this ridiculous issue happened.
I am furious. I spend a lot of time adding to my iTunes library for my Apple TV and suddenly, and for no reason that I can discern, content is not showing up, no matter what I do.
I recently moved my iTunes library to a 2 TB Time Capsule and took it off my internal drive, but this worked fine. For a while iTunes kept losing the library, but it no longer asks for it. It points to the right place, plays the content it chooses to see from the right place, and ignore others even though it showed them before and still has them in the library.
I am beyond confused. Can anyone help?

Check on the Summary tab of your iTunes sync settings that you checked "Sync only checked songs and videos" and that you checked "Sync Music" on the Music tab. Also confirm that your computer authorized for the Apple ID used to purchase this music (in Store>Authorize this computer).

SCEP manager is not showing current logs for any SCEP clients

I have installed SCEP manager on one machine and it is managing one client, which is on another machine.
Client is showing virus detected logs in SCEP client UI, but the same events/logs are not getting stored in SCEP manager database, i tried pulling out records from database, there is no entry for detected viruses in the database, and SCEP manager UI monitor
tab is also not showing any detected events.

Hi,
Active means that it has been active and communicated with the MP within the last 7 days, not that it is active now.
That means that you either haven't extended the Active Directory or created the System Management container in AD and delegated permission to that container and all the child object to the ConfigMgr Primary Site Server Computer account. But that isn't a
requirement only a rekommendation.
If you look in the client in ClientLocation.log file can the client find an MP to communicate with? Any more errors in the MPcontrol.log file on the server?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Konqueror not showing storage media content

Hello,
I have this problem with the new kde 3.4.2 and the 3.4.1-? that was out before it. It was working before that.
The problem is that files/directories are not shown for CDs in the Storage media section of konqueror and once mounted, the device stays busy until konqueror is closed.
In more detail: If I open konqueror in file management mode and go to the services tab -> Storage media, I can see the cd-rom disk. If I click on the icon, it mounts the drive (verified by doing an ls of /media/cdrom before and after) but no files are shown in the konqueror window. I can go to the root folder tab and navigate to /media/cdrom and the files are there and can be copied to disk, etc.
In konqueror (back in services->Storage media) right clicking the icon to eject fails with an error box. If I try to unmount the drive on the command line, I get a 'device is busy' error until I exit konqueror, then it works.
I tried running konqueror from the command line, but it does not show any relevant messages.
I use udev, dbus, hal. No special udev rules or symlinks, just the arch default.
ls -l /dev/hdc
brw-rw---- 1 root optical 22, 0 2005-07-22 04:31 /dev/hdc
...and my user is in the optical group (obvious since I am able to mount/unmount by hand).
Any ideas?

I didn't have the storage problem (anymore...), but kdebase 3.4.2-3 solved other problems for me (being unable to enter some directories from Konqueror, and dog slow audioCD rips via the VFS).
Well done, nonexistent packager!
The only quirk ATM is that kscd does not "see" any audio engine anymore (BTW this also applied for the previous kdebase version), it does read the audioCD and starts playing back, but remains silent...
Since kaffeine, or Amarok works (the latter only with the Arts engine- gstreamer and xine seem unable to use the KDE VFS) this isn't much of a problem, just wondering why kscd can't spot artsd...

App updates not showing change logs in iTunes 12.0.1.26

As above, since the new update and then the update with Yosemite when i go into the app section and go to updates the showing updates now only show the basic info. It does not show what the new changes have been, minor i know but i do like to know what the changes are so i can wait for a future release before updating as some of the apps are huge downloads now.
Thanx

I'm having a similar issue, but cannot see anything to do with airplay in the SysPref > Sound menu. My mac is too old to run Yosemite, so looking to find another way to get this fixed. Any ideas?

BI Publisher "Report Job" not showing job continously searching

Hi Experts,
I'm facing problem while schedule job in Oracle BI Publisher, I successfully schedule job (for bursting) and its running 3 or 4 days continuously, as a result got the report by email but after that I don't get any email, even no error message by email as well. when I go to "Report Job" it showing no data and continuously searching, showing "Fetching Jobs Data....." right top of the page
Administration>Scheduler Configuration
Scheduler = Quartz
Administration>Scheduler Diagnostics
Result = Passed
Oracle BI Publisher 11.1.1.6.0

Ok, you cannot see report scheduler information, report history if scheduler is down or hung.
1. How many reports are simultaneously scheduled to run?
2. How do you rate the size of the scheduled reports? Based on number of rows it generates - Small? Medium? or Large?
Looks like BI Publisher is not able to push jobs into the scheduler queue.
Please check BIP scheduler database table "QRTZ_FIRED_TRIGGERS" to see any running or pending jobs.
You will come to the root cause of the issue by setting the BIP log level to trace:32
http://docs.oracle.com/cd/E28280_01/bi.1111/e22255/diagnostics.htm#BIPAD343
or configure xdodebug
https://blogs.oracle.com/xmlpublisher/entry/get_logging
Take next action steps based on the error/warning that will be captured in the log files during the time of scheduling
You can also consider the following but I would prefer to check the log files first
Please try this at your BIP server side
1. Increase Java Heapsize if it is less
2. Increase BIP Scheduler Database size
3. Clear server cache and scheduler database transaction logs

Server Admin not showing jobs in print queue

Hi All,
I'm not sure if others are having this problem or if it's just me. I am running Mac Server OS X 10.6.7 When I go to Server Admin and select "Print" and then "Job Status", I get a list of all the server's print queues. In the pane below the list of queues, there is a section that says "Jobs on Queue:" which then allows me to select any specific print queue. The problem is, no matter what queue I select, I am never able to see any of the print jobs going through the queue. I have sent multiple jobs to different printers on the server, all while watching the "Jobs on Queue" window for the appropriate printer. In every test, I have never seen ANY print job show up in that window, even though all the print jobs print out fine. I have even tried pausing a printer to let jobs queue up, and still nothing shows up in that window.
I have also tried the same tests while viewing the prints queues from the "Print & Fax" System Preferences pannel directly on the server. Still no luck. Everything prints out fine, but I am unable to ever see any print job hitting the queue.
The reason I even noticed this problem is because a user accidentally printed a 500 page document by mistake. The user called me to stop the job, but I was unable to see anything in the queue to kill. I tried deleting the job directly from the printer, but this just caused the printer to lock up. I would try powering off the printer and restarting it, but as soon as it powered back on, the print job would restart. I even tried restarting the server, but as soon as the server came back online, the print job started again. Finally, after hunting on the web, I tried logging into CUPS via http://localhost:631 and was able to see the print job listed there and finally delete it.
Is there any way to monitor print jobs on the server in real time? I found this previous archived thread describing what appears to the same problems using Mac Server OS X10.5.8, but there was never any solution listed before the thread was archived.
https://discussions.apple.com/thread/2152737

Is there anyone using printing services on a Mac server at all that could comment on whether or not you see the print jobs listed in the queue when printing?

Apple TV is not showing all netflix content in Canada

I've noticed a lot of content available on Netflix Canada is not available through Apple TV. Programs like The West Wing, Louie, The Good Guys, Manhattan, etc. They don't even show up in a specific search. It's not just a case of displaying only 75 titles, or whatever I've read the app does. I've called Netflix and they say that it's Apple's Netflix app issue and that Netflix have nothing to do with it and therefore can't do anything about it. What's going on here? Why would the Apple Netflix app remove content from the Netflix stream, especially when it includes some of the most highly viewed content like The West Wing? How or who decides what stays and what goes?
We don't yet have instant queue in Canada so I can't queue it up on a web browsers and watch on ATV. Also, watching a few minutes of one of these shows on a computer does not put it in my recently watched category on ATV, as the Netflix support person though that it would.
There must be a lot of people with this problem but there is very little info that I've been able to find out there.
Does anybody have any thoughts or advice?
Thanks

I had the same issue until I found the missing movies in the "Home Videos" folder on the Apple TV.

Z1S Not Showing Call Log

Hi, there! I just purchased my Z1S on 2/21 and the call log has stopped working - it just doesn't show up. I've already checked the hidden call log setting and the filtered call log settings. Any suggestions?

What if you repair your phone with SUS or PCC?
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

DI Administrator not show job log content

Similar Messages

Maybe you are looking for