DI API: Licenses

Hi All,
I am wondering what license to buy for integration project.  I have been unable to get a clear answer from anywhere. I am integrating between a third party system and SAP Business One. If I post invoices to SBO using the DI API, do I need to buy a Professional license for every connection made to the sbo server?
Thank you very much,
Adele

Hello Adele, i will try to clarify your question with the following paragraphs:
-SDK License-
The new SDK license employs a concurrent model (first-come, first-served). Under this model, there are two licensing options for the SAP Business One SDK:
-Development License-
This license is required for partners developing add-ons and the only license allowing distribution. In Development license, the license key is shared by all developers connected to the same License Service. The License Service allocates licenses on the basis of first-come, first-served.
The Development license includes both the UI API and the DI API.
-Implementation License-
This license is required for customers intending to develop small modifications or add-ons for their own use using only the UI API.
Add-ons developed under the Implementation license cannot run with a different License Service other than the one that was used for their development. The Implementation license does not allow distribution to third-parties.
In the Implementation license, the license key is shared by all developers connected to the same License Service. The License Service allocates licenses on the basis of first-come, first-served
As far as i understand your question, you need a Development Version and do not have to worry about the connections made to the B1 server unless you are going to use the DI Server (in this case, each license depends in the number of CPU that the server contains).
Now, you will need a Professional User when you access B1 from the Customer side, if not no transactional data (or just a few) can be used.
Please refer to the document "Licensing.pdf" in the "documentation" folder of your Installation CD. There you will find a comparison chart for the different license options.
Kind regards,
Felipe Ortega

Similar Messages

  • Flex Automation API "Licensing Issue"

    Hi,
    We are using "Eclipse Ganymede with Flash Builder Standard Version - 4.0 plugin" + Premium License. We are working with the automation of a Flex application. The automation tool we are using is the FlexMonkium 4.1.5.
    We have some issues with the automation. I have mentioned those below:
    Flex Automation API is limiting the features of the FlexMonkium 4.1.5 as this tool inherits the features and it underlies on the mechanism of the FlexAutomation API only.
    Due to the above mentioned point, the dependencies are:
    License not present. With the trial version only limited records are allowed.
    License not present. With the trial version only limited replays are allowed.
    When we record the user actions performed in the application with the FlexMonkium, we are getting the error as "License not present. With the trial version only limited records are allowed."
    Note: This error is thrown after 15 - 20 user actions have been performed.
    When we execute the recorded script, it is showing up a error message as "License not present. With the trial version only limited replays are allowed."
    Note: This error is thrown after 51 -20 user actions have been executed by the script.
    The complete code of the application is compiled with  "Eclipse Ganymede with Flash Builder Standard Version - 4.0 plugin" + Premium License."
    From the adobe forum: http://forums.adobe.com/thread/682958 we understood that the 4.1 SDK with Premium licence would work fine with record and playback.
    My quesion is, Does the same works with this combination > "Eclipse Ganymede with Flash Builder Standard Version - 4.0 plugin" + Premium License.
    Please guide me to resolve this issue, it would really be very helpful for me:)
    Thanks in advance,
    Anand.S

    May I know what you mean exactly by "Flash Builder Standard Version - 4.0 plugin" + Premium License.
    Have you entered Flash builder premium license key in the screen that asks for serial number? If so, it will be Flash Builder Premium version 4.0 and not Standard version any more.
    If so, automation should work without any issue.
    To check whether premium features are enabled for your version of Flash Builder, please open "Network Monitor" using Window > Show View and see if it is enabled.
    If it is disabled, it shows a message that premium license is required.
    Please confirm.
    Thanks,
    Deeptika

  • 'Public' Flex Java API licensing

    Hi all,
    I would like to use the MessageBroker and AsyncMessage classes from Flex Java API to publish messages to a Flex destination from Java classes.
    The library with this API comes in the LiveCycle Data Services release but when i look at this API, it says clear is 'Public'.
    How public is it? Can i use those classes freely for my production application? Is there any license restriction? Same license as for Live Cycle Services?
    I need to know to decide what design i will use to connect or Flex client with our java server, so is really urgent.
    Thanks,
    Dani.

    Looks like things have changed a bit since last week when I posted.
    With the announcement yesterday of BlazeDS (scheduled for release 2008), it seems the libraries mentioned will be available under the LGPL v3, so I believe you may be able to redistribute them (unmodified and probably as a separate installer/archive) under the terms of the LGPL.
    http://labs.adobe.com/technologies/blazeds/
    It sounds like there will be some features not included in the OSS version of Data Services, but from reading the FAQ it seems that the messaging API you mentioned will be included in the LGPL licenced version.

  • Automation API license

    Hello,
    I'm currently experimenting with FlexMonkey in order to automate some user interface tests. However, neither FlexMonkey 1 nor FlexMonkey 4 seem to work with our application build with Flex SDK 3.5. It looks like there is a problem with the automation API licence. After recording or replaying a couple of actions I always get one of the following error messages within the Flex application:
    License not present. With the trial version only limited records are allowed.
    License not present. With the trial version only limited replays are allowed.
    I'm not sure why I get those error messages. We have valid licenses for Flex Builder 3 Professional and Flash Builder 4 Premium which should, if I'm not mistaken, include licenses for the automation API.
    I've also tested using a simple application with just one single button in it. When I compile it with SDK 3.5 and record my actions with FlexMonkey I get the error messages after about 30 clicks on the button. When I compile the application with SDK 4.1 everything works fine.
    So, the license issues appear only in conjunction with SDK 3.x, not with SDK 4.x. Unfortunatly I need to use SDK 3 to compile our application.
    I'd really appreciate your help on solving this issue.
    Best regards,
    Gerhard

    Hi,
    The combinations of license info is present below.
    Automation licensing works in the following fashion with Flash Builder 4
    SDK Version
    License
    Status
    3.5
    Flex Builder 3 professional license
    Works
    3.5
    Flash Builder 4 premium license
    Works
    4.1 onwards
    Flex Builder 3 professional license
    Licensing error
    4.1
    Flash Builder 4 premium license
    Works
    Since you are using 3.5 sdk , with the valid 4 license on the Flash Builder 4, you should not be getting the license error.
    Are you compiling the apps from the FB or using some scripts ?
    Can you give the following information ?
    Which FB you are using ?
    How is the license applied?
    Please check for the license.properties file (C:Documents Setting/ALL users/applicatiodata/adobe/flex) and check when you enter a value it is reflected.
    have you recompiled the application after licensing ?
    thanks,
    rani

  • Automation API License  - FlashBuilder Premium 4.5, SDK 3.6A

    Hi,
    I'm currently doing a POC with FlexMonkey in order to automate some user interface tests. I have Licensed version of Flash Builder 4.6
    Though i have a premium license of 4.5, I am using FlexSDK 3.6A to compile the project, after recordning / playback of 20 ~ 30 action, I always get one of the following error messages
    License not present. With the trial version only limited records are allowed.
    I'd really appreciate your help on solving this issue.
    Thanks,
    Arjun

    When i tried same setup with 4.6 sdk its working fine i.e. with premium license of 4.5 and sdk 4.6 Automation API donot give any error but when my sdk is 3.6A
    i still gets an error License not present. With the trial version only limited records are allowed.
    Please share your experience...

  • AXL API license?

    Where can I find the license for using the AXL API?

    so anyone could use it in their application without Cisco's approval?

  • Device Access API licensing

    I've been looking around, but have been unable to find, any licensing information on the device access API.
    Is the package naming for this API (com.oracle.deviceaccess.*) intended to mean that Device Access is intended to be an Oracle "closed source" API and implementation? Or, are there plans to license the API and/or implementation under some sort of open source license similar to OpenJDK?
    Thanks,
    Hugh

    Hi Hugh,
    There are plans to update the licensing and make the Device Access API more broadly accessible. Please stay tuned.
    Thanks,
    -- Terrence
    Principal Product Manager
    Oracle

  • OPSS API licensing question

    Hi product managers,
    Is there a licensing restriction on use of OPSS API's with ADF essentials ? Will this API be included in the future ADF essentials build ? Will there be a separate licensing cost for this API in this case one might use the Apache LDAP API's.
    I have seen the OPSS FAQ whitepaper but it said that post 11gr1 release they might offer it separately but the document is really old.
    Regards,
    Ramandeep Nanda

    Hi Ramandeep,
    Licensing questions are best answered directly by the Oracle Sales team - the answer could depend on the products that your company already have licensed, and how they are bundled etc.
    Regards,
    Colin

  • Flex automation and license

    Hi,
    I try to use FlexMonkey with my project but after 30 records I've this error message : "License not present. With the trial verison only limited records are allowed.". However, I bought the license for Flash Builder premium 4.5.
    Maybe the problem is because I compile my project with flex builder 3.6?
    Could you help me? I bought the license specially for using Flex monkey...
    Thanks in advance,
    Bat

    It's not a FlexMonkey problem. It's an automation license problem and I'm having the same problem on one of two Windows 7 64-bit machines. I've done all that I can find in the thread Re: Flex Automation API "Licensing Issue" http://forums.adobe.com/thread/834214 but to no avail. As Deepita suggested to confirm Premium status, network monitor is available. I originally installed the trial version of Flash Builder, even had Burrito on for a while.
    Assuming it was some leftover file, I uninstalled every Adobe product  Bought CS5.5 Master Collection. Installed, same thing. Then I uninstalled CS5.5 MC and made sure that I permanently deactivated as per the suggestion in another thread. No luck.
    As per the above thread, I went looking for the following:
    On Windows 7 and Vista, the license.properties file is located in: ..\ProgramData\Adobe\Flex
    I modified that file's record for serial number (as it wasn't my sn for CS5.5) and had great hope.
    I'm still limited to 20 automation actions, at which point it all stops. Solution?

  • Licensing for Oracle Secure Backup Cloud Module

    My company is looking at moving from our internal tape backup to Oracle (Cloud) Database Backup.  We have questions about costs for licensing the Oracle Secure Backup Cloud Module.  We have been using Oracle Secure Backup Express Edition and would like to know if there are additional API/License costs for using Oracle Secure Backup Cloud Module in additional to the $33/TB per month cost listed on the Oracle Cloud Database Backup page at https://cloud.oracle.com/database_backup?tabID=1394421701419.
    We have spoken with 6 different sales and technical reps at Oracle and at Oracle Cloud and none have been able to provide a clear answer for this question.  We have been directed to this forum, by the staff at Oracle Cloud.
    Any feedback would be greatly appreciated.

    I don't know about this tape not appearing to the OS, some other OS related documentation would help you there. This may be due to the fact that this is a removable disk storage device, rather than actual tape.
    However I have checked the OSB tape support matrix and this device is not listed, so this is not supported for use with OSB.
    Thanks
    Rich

  • Crystal report 10 error - Help required

    I am using crystal report 10.0.0.533 - Crystal report developer edition.
    All of my reports are working fine without any issue, except one report.
    It throws the below error message:
    Crystal Reports ActiveX Designer error '80047cbd'
    *You are attempting to use functionality that falls under the Crystal Decisions Report Creation API license. This system does not have a valid license, or the evaluation copy of the license has expired. Please contact Crystal Decisions to obtain a Report Creation API license.*
    /egads/Reports/EventDataRep.asp, line 68
    At line number 68 we have below code:
    Tables.Add "", , Session("oRecRep"), , "p2smon.dll"
    This report was earlier used for Crystal 8.5. However Crystal 10 no longer uses p2smon.dll.
    Alternative dll in Crystal report 10 is crdb_ado.dll, I replaced it in the code, however still it is not working.
    Could anyone please help me with this issue?

    Even after replacing with crdb_cdo.dll...I am getting same error..
    Below is the code:
    Set oConn = Server.CreateObject("ADODB.Connection")
    Set oRec = Server.CreateObject("ADODB.Recordset")
    Set oRecRep = Server.CreateObject("ADODB.Recordset")
    oConn.Open strEGadsUIDConn
    strSQL = "SELECT CRYSTAL_XML_STRING, CRYSTAL_QUERY_STRING FROM TEMP_CRYSTAL_REPORT WHERE USER_ID = '" & strUserId & "' "
    Set oRec = oConn.Execute(strSQL)
    If Not oRec.EOF Then
         strXMLString = oRec("CRYSTAL_XML_STRING")
         strSQLQuery = oRec("CRYSTAL_QUERY_STRING")
    End If     
    strSQLQuery = Replace(strSQLQuery, "%", "'", 1)
    Set Session("oRecRep") = oConn.Execute(strSQLQuery)
    If Not Session("oRecRep").EOF Then
         Session("oRecRep").MoveFirst
    End If     
    ' CREATE THE APPLICATION OBJECT                                                                    
    If Not IsObject (session("oApp")) Then                             
         Set session("oApp") = Server.CreateObject("CrystalRuntime.Application.10")
    'Set session("oApp") = Server.CreateObject("Crystal.CRPE.Application")
    End If                                                               
    Path = Request.ServerVariables("PATH_TRANSLATED")                    
    While (Right(Path, 1) <> "\" And Len(Path) <> 0)                     
    iLen = Len(Path) - 1                                                 
    Path = Left(Path, iLen)                                              
    Wend                                                                               
    'This "While/Wend" loop is used to determine the physical path (eg: C:\) to the
    'Crystal Report file by translating the URL virtual path (eg: http://Domain/Dir)                                                                       
    'OPEN THE REPORT (but destroy any previous one first)                                                    
    If IsObject(session("oRpt")) then
         Set session("oRpt") = nothing
    End if
    'Set session("oRpt") = session("oApp").NewReport
    reportname = "rptEventDataTemplate.rpt"
    Set session("oRpt") = session("oApp").OpenReport(path & reportname, 1)
    'Set oRptOptions = Session("oRpt").Options
    session("oRpt").MorePrintEngineErrorMessages = 0
    session("oRpt").DiscardSavedData
    'session("oRpt").MorePrintEngineErrorMessages = False
    session("oRpt").EnableParameterPrompting = 0
    session("oRpt").PaperOrientation = 2
    Set Database = session("oRpt").Database
    'Instantiate the Database Collection
    Set Tables = Database.Tables
    'Instantiate the Tables Collection
    Tables.Add "", , Session("oRecRep"), , "crdb_cdo.dll"
    Set FirstTable = Tables.Item(1)
    Set Fields = FirstTable.Fields
    'Set Group Name
    GroupField = "{ado.UNIT_NAME}"
    For i = 1 to Fields.Count
         result = strcomp(Fields.Item(cint(i)).Name,cstr(GroupField))
         If cint(result) = 0 then
              Set GroupFieldIs = Fields.Item(cint(i))
         end if
    next
    Select Case cstr(SortDirection)
         Case "Ascending"  intsortdirection = 0
         Case "Descending" intsortdirection = 1
         Case "Original Order" intsortdirection = 2

  • Crystal Reports 9 and Clearquest

    Hello,
    my company uses (for historic reasons) IBM Rational Clearquest 2003 (2003.06.15.734.) with Crystal Reports Version 9.2 (Service Pack 7) to create Reports on the entries in the Clearquest database. However, when I try to create a new report format, I get the following error message:
    Problems creating new report format.
    Details
    COleDispatchException exception reported: You are attempting to use functionality that
    falls under the Crystal Decisions Report Creation API license. This system does not have
    a valid license, or the evaluation copy of the license has expired. Please contact Crystal
    Decisions to obtain a Report Creation API license.
    Now, even though this sounds like a licensing issue, I do have a valid, legal license of Crystal Reports Designer 9, and it seems that Clearquest 2003 specifically expects Version 9 (My company laso purchased Crystal Reports Client 2008, but it seems to be incompatible with Clearquest 2003). A search on the Internet has yielded similar problems with Clearquest 7 and Crystal Reports 11, that were subsequently resolved, but, unfortunately, upgrading Clearquest is not an option for my company at this point in time.
    If anybody has any tips or pointers, I would greatly appreciate any help!

    Hi,
    The problem really is a licensing issue.  Clearquest sounds like it's making api calls to Crystal.  Crystal 9 had special api calls that required special licensing.  These were the Report Creation APIs.  As soon as a Report Creation API is called from an application, the report engine looks for a license file and if the file doesn't exist you get the message you see.  The regular APIs are free and do not require the license. 
    In newer versions of Crystal the licensing has been revised which is why Crystal 11 works. 
    In most cases, I'd say upgrade from Crystal 9 to 11 but because it's Clearquest that's calling the reports, I doubt it would be as simple as upgrading the report engine to Crystal 11. 
    My suggestion would be to go back to Clearquest and see if they have a license you should have received.  If they designed it with those APIs, they should also be distributing the license.  The other option would be to call Business Objects and see about purchasing a license.  From my understanding it's not cheap. 
    Good luck,
    Brian

  • How to supress prompt of database parameter in Crystal report schedule

    Hi,
    We are using Crystal Reports 2008. In a particular crystal report generated from some SAP WB query, has a parameter (prompt) on month. Now we need to schedule it for monthly execution. But we are still unable to manage the prompt for month automatically. We don,t have API license, so we can not use VBA .Net or Java programming.
    Can we manage this database level prompt using Crystal Report formulas. Please suggest how can we manage this prompt so that it can be executed automatically according to schedule.
    Thanks & Regards,
    Avijit

    Hi,
    Thanks for your reply.
    But I know the logic that I need to assign the current month date value to the parameter supplied by BW query in the Crystal Report formula. And I tried to write a new formula using "BeforeReadingRecords" under Formula field. But this formula is not assigning any  to the parameter and I am with no success.
    Can you please mention how and where shoul I write the formula. Looking forward for you answer.
    Regards,
    Avijit

  • Get error when add new object in crystal report

    hi
    i have this error "You are attempting to use functionality that falls under the Crystal Decisions Report Creation API license. This system does not have a valid license, or the evaluation copy of the license has expired. Please contact Crystal Decisions to obtain a Report Creation API license."
    when i add new object in crystal report with vb.net
    ""CRReport.Sections.Item(ii).AddTextObject("new text", 1000, 0)
    i do same program for 3 months ago but i lost it work without error
    ihave a license key for crystal report
    use cr10 with vb.net 2005
    can help me
    thanks

    Also, check out the blog [Use of the Report Designer Component (RDC) in VS .NET|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID0468837450DB00359707053703393347End?blog=/pub/wlg/15939].
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Unknown component: ENDECA_BULK_ADD_OR_REPLACE_RECORDS class

    Hi,
    I see below error while running the graph:
    INFO [main] - Graph definition file: graph\LoadData.grf
    ERROR [main] - Unknown component: ENDECA_BULK_ADD_OR_REPLACE_RECORDS class: ENDECA_BULK_ADD_OR_REPLACE_RECORDS
    java.lang.ClassNotFoundException: ENDECA_BULK_ADD_OR_REPLACE_RECORDS
    what is the jar file to have this component?
    It seems that I have all set to classpath as below.
    Still getting same error.
    Thanks
    Pradeep K Pathak
    =======================================
    I tested forward slash with backward also but same error.
    =======================================
    USER_CLASSPATH=
    "java.exe" -classpath ";;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\;;;c:\Ora
    cle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/annotations.jar;c:\Oracle\Endeca\
    Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/cloveretl.engine.jar;c:\Oracle\Endeca\Discov
    ery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/commons-cli-1.1.jar;c:\Oracle\Endeca\Discovery\2.3
    .0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/commons-codec-1.4.jar;c:\Oracle\Endeca\Discovery\2.3.0\In
    tegrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/commons-httpclient-3.1.jar;c:\Oracle\Endeca\Discovery\2.3.0\In
    tegrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/commons-io-1.4.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator
    \plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/commons-io-LICENSE.txt;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plu
    gins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/commons-logging-1.1.1.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plug
    ins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/commons-net-2.0.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com
    .cloveretl.gui_3.2.1\lib\bin\.\../lib/dom4j-1.6.1.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.
    gui_3.2.1\lib\bin\.\../lib/ftp4j-1.4.3.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\l
    ib\bin\.\../lib/ftp4j-LICENSE.txt;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\
    ../lib/httpclient-4.1.1.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib
    /httpcore-4.1.1.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/icu4j-L
    ICENSE.html;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/icu4j-normalize
    r_transliterator-4.8.1.1.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../li
    b/icu4j-unicode-LICENSE.txt;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib
    /jakarta-oro-2.0.8.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/javo
    lution.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/jaxb-api-LICENSE
    .txt;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/jaxb-api.jar;c:\Oracle
    \Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/jaxb-impl-LICENSE.txt;c:\Oracle\Ende
    ca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/jaxb-impl.jar;c:\Oracle\Endeca\Discovery\
    2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/jaxen-1.1.1.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integ
    rator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/jets3t-0.8.0.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plug
    ins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/jms.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.g
    ui_3.2.1\lib\bin\.\../lib/joda-time-1.6.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\
    lib\bin\.\../lib/jsch-0.1.42.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\.
    ./lib/jsr173_1.0_api.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/jx
    l.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/LICENSE.txt;c:\Oracle
    \Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/log4j-1.2.15.jar;c:\Oracle\Endeca\Di
    scovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/openxml4j-1.0-beta.jar;c:\Oracle\Endeca\Discov
    ery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/org.eclipse.nebula.widgets.grid-1.0.0-SNAPSHOT.jar
    ;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/poi-3.8-beta4-20110826.jar
    ;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/poi-ooxml-3.8-beta4-201108
    26.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/poi-ooxml-schemas-3.
    8-beta4-20110826.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/sardin
    e.jar;c:\Oracle\Endeca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/tar.jar;c:\Oracle\End
    eca\Discovery\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/truezip-6.8.1.jar;c:\Oracle\Endeca\Disco
    very\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/xmlbeans-2.3.0.jar;c:\Oracle\Endeca\Discovery\2.3
    .0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/XmlSchema-1.4.3.jar;c:\Oracle\Endeca\Discovery\2.3.0\Inte
    grator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\../lib/XmlSchema-LICENSE.txt" "-Dclover.home=c:\Oracle\Endeca\Discovery
    \2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\.." org.jetel.main.runGraph -plugins "c:\Oracle\Endeca\Disco
    very\2.3.0\Integrator\plugins\com.cloveretl.gui_3.2.1\lib\bin\.\..\plugins" -noJMX graph\LoadData.grf
    ===========================================================

    Hi! Thanks for your reply,
    I did what you said (drag the component again to the Graph and delete the old one) but I am still getting the same error (The component that is not being found is the RESET DATA STORE),
    One thing I forgot to tell you is that I am running it from the command line using "./clover" command line which is located in
    /home/oracle/Endeca/Discovery/2.3.0/Integrator/plugins/com.cloveretl.gui_3.2.1/lib/bin
    When I ran from the Integrator it worked OK.
    I am using Endeca 2.3.0. and I am executing it like the following:
    ./clover runGraph /home/oracle/Endeca/workspace/MFGProject/graph/RunAllGraphs.grf
    Any new ideas?

Maybe you are looking for