DI Event Service Tool download problems

I've downloaded the DI Event Service Tool v1.0 but when I'm trying to unzip this rar file, I'm getting an error saying "The file is corrupt, if you have downloaded this file, download it again." I tried it but every time I'm downloading it and trying to unzip it, I'm getting the same error. Any solution to this?

Hi,
From which page and which version are you trying to download?
The link to all versions is at: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/0028c553-9a87-2910-b68c-9a5b3b5b16fe [original link is broken]
I have tried version "B1DIEventService setup package for B1 2007 (using private queues) " and I can download it without problems...
Regar

Similar Messages

  • I am running Windows 7  and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

    I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit

    Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I am trying to download iTunes and am getting an error message: "MobileMe Services encountered a problem and need to be closed"

    I am trying to download iTunes and am getting an error message: "MobileMe Services encountered a problem and need to be closed"

    Hello dananbar,
    Thank you for the details of the issue you are experiencing when installing iTunes.  I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Cant download "DI Event Service"

    Hi all,
    I cant seem to complete the download of "SAP Business One DI Event Service" from the download section of SDN.  Can someone please email the 1.2MB file to me...[email protected]
    Thanks

    Hi GB,
    Finally i managed to download the DI Event Service.  Thanks
    Now i've tried to download the eLearnings on the following page -
    /docs/DOC-8857#section10 [original link is broken]
    and they dont want to download completely, the first1 bombs out at 384kbs...
    is this the forum to report these issues or is there a "Webmaster" that I can complain to"
    Thanks

  • Errors occurred while installing the updates. if the problem persists choose tools download only

    errors occurred while installing the updates. if the problem persists choose tools download only and install manully.

    Does anyone get this message when attempting to download?  What to do?
    The webpage athttps://swdlp.apple.com/cgi-bin/WebObjects/SoftwareDownloadApp.woa/wa/getProduct Data?localang=en_us&grp_code=itunes&returnURL=http://www.apple.com/itunes/downlo ad&isMiniiFrameReq=N might be temporarily down or it may have moved permanently to a new web address.
    Error 501 (net::ERR_INSECURE_RESPONSE): Unknown error.

  • CORBA Event Service problem

    Greetings,
    I hope I'm posting on the right section :)
    I'm new to ORBacus with Java and I'm having a problem when trying to use the Event Service.
    I have this pull client:
    Any event=null;
    EventChannel eventChannel=null;
    ConsumerAdmin consumerAdmin=null;
    ProxyPullSupplier pullSupplier=null;
    try{
             eventChannel = EventChannelHelper.narrow(obj);
             consumerAdmin = eventChannel.for_consumers();
             pullSupplier = consumerAdmin.obtain_pull_supplier();
                // I need to do this to bind proxy to the Event Stream, correct?
               // The problem is on the parameter it takes, a PullConsumer
             pullSupplier.connect_pull_consumer( new MOTDPullConsumer() );
             event = pullSupplier.pull(); 
    }(...)So i'm actually having problems implementing the PullConsumer interface:
    import org.omg.CORBA.*;
    import org.omg.CosEventChannelAdmin.*;
    import org.omg.CosEventComm.*
    public class MOTDPullConsumer implements PullConsumer{
        public void disconnect_pull_consumer(){
         System.out.println("Pull consumer off!");
    }This causes a compilation error which I can't determine why, the interface only specifies the method implemented above:
    MOTDPullConsumer is not abstract and does not override abstract method createrequest(org.omg.CORBA.Context,java.lang.String,
    org.omg.CORBA.NVList,org.omg.CORBA.NamedValue,
    org.omg.CORBA.ExceptionList,org.omg.CORBA.ContextList)
    in org.omg.CORBA.Object
    Anyone seen this happen before?
    Thanks in advance! :)

    I solved it by passing null to connect_pull_consumer():
    try{
         eventChannel = EventChannelHelper.narrow(obj);
         consumerAdmin = eventChannel.for_consumers();
         pullSupplier = consumerAdmin.obtain_pull_supplier();
         pullSupplier.connect_pull_consumer( null );
         event = pullSupplier.pull();
    And did the same to connect_push_supplier() on the server side - it's all working OK now. Here are two fine links on this matter, if anyone ever needs it:
    http://www.iona.com/support/docs/orbix2000/2.0/pguide_cpp/html/Events4.html#151985
    http://www.iona.com/support/docs/manuals/orbix/33/html/orbixevents33_pguide/PullModel.html

  • Error occurred while installing updates. If problem persits, choose tools, download only and try installing manually

    error occurred while installing updates. If problem persits, choose tools, download only and try installing manually

    Are you able to update if you use an iTunesSetup.exe (or iTunes64Setup.exe) installler file downloaded from the Apple website?
    http://www.apple.com/itunes/download/

  • Hi, I am prompted to download the latest  Tunes software (10.7) but after starting the process is stopped and the massage says "Errors occured while installing, if the problem persists choose Tools download only) This process also stops part way through

    Hi, I am prompted to download the latest I Tunes software (10.7) (I have done this sucessfully for other versions many times before)
    The process starts but stops quite quickly.A message pops up "Errors have occured while installing updates, if the problem persists choose Tools>Download Only and install manually" When I try this it still fails but another message pops up "Invalid signature, the download has been removed"
    Not very sharp on computers so any help would be appreciated.
    Regards

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Have a first gen ipad. Can't download version 5.1 because iTunes 11.1 need to be downloaded. Cannot download version of iTunes. " errors occured while installing updates. if the problem persists choose tools download only and try installing manually"

    Have a first gen iPad with 4.3 IOS. Can't download version 5.1 because iTunes 11.1 need to be downloaded. Cannot download version of iTunes. " errors occured while installing updates. if the problem persists choose tools>download only and try installing manually". This is as far as I can get. Can't find tools to manually download. When I try to reset to factory settings, I get an error also.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • [Problem] Service Report - SAP EWA - Download Problem

    Hi Gurus
    I managed to create and activate EWA for Solman 4.0
    but I got problem with the result generated by Solman. Below is the quote from the EWA report
    Download Problem
    We were unable to perform a correct analysis because essential parts of the download data are missing.  This is most likely due to a problem with data collection or transfer.
    Recommendation: Check the log for this session in the Service Data Control Center (execute transaction SDCC or the new SDCCN in your system).  If an error is listed, perform the Service Preparation Check.
    Implementation: To perform the Service Preparation Check, execute transaction SDCC and choose Information -> Service prep. check, or if you are using SDCCN, create a new "Service Preparation Check" task.
    i've already run the service preparation check and follow all the recommendation.
    and from report RTCCTOOL, i didnt get any recommendation to follow
    can anyone help me with this ? thanks
    below is my Solution Manager component
    SAP_BASIS - 700 - 0011
    SAP_ABA - 700 - 0011
    PI_BASIS - 2005_1_700 - 0011
    ST-PI - 2005_1_700 - 0004
    ST - 400 - 0010
    ST-A/PI - 01K_CRM560 - 0000
    ST-ICO - 150_700 - 0007
    ST-SER - 700_2005_2 - 0002
    below is the satellite system (SAP server that i try to collect the data for EWA report) component
    SAP ECC 6.0
    SAP_BASIS - 700 - 0005
    SAP_ABA - 700 - 0005
    PI_BASIS - 2005_1_700 - 0005
    ST-PI - 2005_1_700 - 0001
    ST-A/PI - 01K_ECC600 - 0000
    SAP_BW - 700 - 0005
    SAP_AP - 700 - 0002

    Hi Didik,
    have you run RTCCTOOL in both systems (SolMan, ECC)?
    ST-A/PI level is OK
    ST-PI - 2005_1_700 is not on latest Support Package (SolMan, ECC).
    RTCCTOOL will check Support Package Level as well as the availability of important statistical data (for example Workload Statistics, tx ST03N).
    Which parts of the EWA do not contain data?
    Best regards,
    Ruediger
    Edited by: Ruediger Stoecker on Mar 19, 2008 8:00 AM

  • Problem starting Microsoft Forefront Server Protection Eventing Service?

    Hi Guys,
    Our Exchange 2007 Microsoft Exchange Information Store and Microsoft Exchange Transport services wont start. All dependencies have started except Microsoft Forefront Server Protection Eventing Service. We tried starting it manually but we got this message
    (see attached). Any idea how to fix this? Since we cant start Microsoft Exchange Information Store and Microsoft Exchange Transport services, OWA users cant access their emails. Please advise.
    Thanks,
    Arnel

    Hi Arnel,
    Based on your description, I understand that the Microsoft Forefront Server Protection Eventing Service can’t
    be started.
    Please run
    services.msc, select the Microsoft Forefront Server Protection Eventing Service and double-click to open it. In the service properties show box, please select Dependencies tab to check which service that it depends on didn’t start.
    Meanwhile, would you please let me know which version of the
    Forefront for Exchange Server? Please check if you have installed the latest updates to Forefront for Exchange Server. (Such as:
    Hotfix Rollup 3 for Microsoft Forefront Protection for Exchange and so on.)
    By the way, this issue seems to be more related to Forefront for Exchange Server. Please post it in the Forefront
    for Exchange Server forum. I believe we will get a better assistance there.
    https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FSENext
    Hope this helps.
    Best regards,
    Justin Gu

  • Webcenter Spaces Events Service configuration: FATAL Alert BAD CERTIFICATE

    Hello,
    I have a simple requirement to connect the events taskflow from an exchange server that is https and has a confirmed security certificate. I use the wsdl path for the events service and add it to my webcenter spaces service configuration -> Personal Events configuration.
    Then I ran into this error.
    javax.net.ssl.SSLKeyException: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received.
    So, I downloaded the .crt file from Chrome (in per format) and used the keytool to upload the certificate exception into the cacerts file inside jdk and jrocket folders. I restart the managed server running WebCenter Spaces. This had no effect on the error.
    Is there anything else that I should do?
    Thanks,
    Pradyumna

    I have the same problem. Did You resolve it?

  • DI Event Service Listening Error

    Hi,
    I have installed DI Event Server(2007) and Clients in server (Winows 2003) and Client(Windows XP SP2) amchines respectively.
    I have pasted the SBO_SP_TransactionNotification codes.
    Service is running in server.
    I have added Windows MSMQ component in Client.
    But DI Event Service is not listening.
    Log shows like this:
    TIME;LEVEL;INFO;
    10/31/2008 5:26:32 PM;INFOPLUS;TraceLevel: Warning
    10/31/2008 5:26:32 PM;INFOPLUS;PortNumber: 4334
    10/31/2008 5:26:32 PM;INFOPLUS;KeepAlivePeriod: 2000000
    10/31/2008 5:26:32 PM;INFOPLUS;KeepAliveMax: 12000000
    10/31/2008 5:26:32 PM;INFOPLUS;MaxSizeAction: Replace
    10/31/2008 5:26:32 PM;INFOPLUS;MaxFileSize: 6000000
    10/31/2008 5:26:32 PM;INFOPLUS;Connect to server.
    10/31/2008 5:26:32 PM;INFOPLUS;Client: Reference to server acquired
    10/31/2008 5:26:32 PM;INFOPLUS;CreateQueue ITSL-SALT-12\private$\633610707923630092
    10/31/2008 5:26:52 PM;INFOPLUS;AddListener SBODemoIN/oItems/Add
    10/31/2008 5:26:52 PM;INFOPLUS;AddListener SBODemoIN/oItems/Update
    10/31/2008 5:26:52 PM;INFOPLUS;AddListener SBODemoIN/oBusinessPartners/Add
    10/31/2008 5:26:52 PM;INFOPLUS;AddListener SBODemoIN/oBusinessPartners/Update
    10/31/2008 5:26:52 PM;INFOPLUS;AddListener SBODemoIN//Update
    10/31/2008 5:26:52 PM;INFOPLUS;AddListener SBODemoIN/oBusinessPartners/
    10/31/2008 5:26:52 PM;INFOPLUS;AddListener SBODemoIN//
    10/31/2008 5:26:52 PM;INFOPLUS;AddListener SBODemoIN/129/Add
    Please help me out of this problem.
    Edited by: Rui Pereira on Dec 23, 2008 3:27 PM

    Hello Sibasish,
    Did you start the DI Event Server in the server?
    Start=>Run the command "services.msc"=>Start the DI Event Server.
    From its architecture, the landscape is:
    1. Server
    -B1DIEvnetServer - It is a windows service application called u201CSAP Business One DI Event Serviceu201D that create the remoting
    <<C:\Program Files\SAP\SAP Business One DI Event Service\SAP Business One DI Event Server\B1DIEventsServerService>>
    2.Client
    -B1DIEventService <<C:\Program Files\SAP\SAP Business One DI Event Service\SAP Business One DI Event Client\B1DIEventsService>>
    The B1DIEventService is a library that both client and server must compile with (nothing to be changed by the partner). It acts as a filter taking simple commands from the client application and implementing the technical part of the connection with the B1DIEventServer.
    The log in your last post is for this component in client.
    -Partner AddOn
    The name B1DIEvnetServer and B1DIEventService is somehow confused.
    Have you tried the client sample?<<D:\08-Perforce\BUSMB_B1\SBO_Tools\dev\Tools\SDK\B1DIEventsService\ClientSamples\ClientSampleCSharp>>
    Kind Regards, Yatsea

  • How do I install latest version of iTunes when I keep getting an error message to go to Tools, Download only, then Install manually??

    How do i install latest version of iTunes when I keep getting an error message to go to Tools, Download only, and install manually??

    Hi Moerdesign,
    Did you downloaded and installed Photoshop and Illustrator CS6 through Creative Cloud.
    After uninstalled them, Creative Cloud saying applications are "Up to Date" when not installed.
    If this is the case then please perform the steps given in the help document.
    http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
    Please let me know if this is not the case.
    Screenshot of the problem would be great help.
    Regards,
    Sumit Singh

Maybe you are looking for