DI Metadata Integrator install problems

Environment: BOE BO XI r2 SP4 installed on windows server A with an Oracle dB
Data Integrator 11.5 is installed on a windows server B
we have also installed the BOE components, designer, webi, etc on server B.
Problem: When we try to install DI metadata integrator on server B, I get the following error:
'...path not found'
when i try to run the cmsConfig.cmd file from dos i get the same error.
I have checked and see all the jar files. Any help would be appreciated
See below the information in the cmsconfig.cmd file
@echo off
setlocal
rem Define the directory containing the Business Objects Enterprise and collector jar files.
rem NOTE: Do not change the names of the following environment variables. They are subject
rem to automatic update by the install utility.
set DI_DIR=C:\PROGRA1\BUSINE1\DATAIN~1.7
set CE_JARS_DIR=C:\PROGRA1\BUSINE1\common\3.5\java\lib
set DI_CRAWLER_DIR=C:\PROGRA1\BUSINE1\DATAIN~1.7\ext\cmsCollector
if NOT defined JAVA_HOME set JAVA_HOME=%DI_DIR%\ext\jre
set CLASSPATH=%DI_DIR%\lib\loader.jar
"%JAVA_HOME%\bin\java" -Djava.system.class.loader=com.bobj.ConfigurableClassLoader -Dclassloader.properties="%DI_CRAWLER_DIR%\classloader.properties"
-Dlink_dir="%DI_DIR%" -Dboe_dir="%CE_JARS_DIR%" com.acta.crystalrepo.config.crConfigLaunch -C"%CE_JARS_DIR%" -I"%DI_CRAWLER_DIR%" -D"%DI_DIR%" %*
:EXIT
See below the information in the properties file
Application jars
cp.0.directory=%link_dir%
lib
cp.0.jars=acta_adapter_sdk.jar;acta_tool.jar;log4j-1.2.3.jar
Business Objects Enterprise jars
cp.1.directory=%boe_dir%
cp.1.jars=cecore.jar;celib.jar;ceplugins.jar;cereports.jar;cesession.jar;corbaidl.jar;ebus405.jar;pluginhelper.jar;rasapp.jar;rascore.jar;serialization.jar;webi.jar;wilog.jar;jtools.jar;boconfig.jar;rebean.jar;rebean.wi.jar;rebean.common.jar
webi.directory=%boe_dir%
webi.jars=webi.jar;wilog.jar;jtools.jar;boconfig.jar
CMS Metadata Integrator jar
cp.2.directory=%link_dir%
ext
cmsCollector
lib
cp.2.jars=cms_md_collector.jar;MMCore.jar;MMCMS.jar
External jars
cp.3.directory=%link_dir%
ext
lib
cp.3.jars=xerces.jar;msutil.jar;commons-logging.jar
Web External jars
cp.4.directory=%link_dir%
ext
diAdmin
WEB-INF
lib
cp.4.jars=sqljdbc.jar;ojdbc14.jar;db2java.jar;ifxjdbc.jar;ifxjdbcx.jar;jconn2.jar;jconnect45.jar;mysql-connector-java-5.0.4-bin.jar

Found a solution, see link below
http://www.forumtopics.com/busobj/viewtopic.php?p=581371&sid=ee3cd084cfd9010cfda6665224f809e1

Similar Messages

  • Metadata integrator-configuration problem

    hi..
    i'm just exploring the meta data integrator. when i configure the cms with my login and the DI repo with the local repository. it says success. but when i run the job it says the following error..
    [CrystalCrawlerMain]configuration <config_new> not valid
    CMS Integrator failed: configuration <config_new> not valid
    when i test it. it is successfull and the job is also successful.
    help me in this pls
    vigi

    Sergey, many thanks for your help.  I am still having some problems however.
    For Data Services (BO XI3), I had to change the cmdConfig.cmd file and
    set CE_JARS_DIR=E:\Program Files\Business Objects\common\4\java\lib. I also had to copy the load.jar to this directory.
    I was then able to successfully run the setup which created the folder in the CMC.
    When I run the metadata integrator program in the CMC, it runs through successfully. However when i look at the impact and lineage in the DI Mgmt console, I am not seeing any information on objects in my BO repository.
    Not sure if I'm missing a step..any help would be appreciated
    thanks

  • DI Metadata Integrator install on non-CMS system

    Our Data Integrator systems do not run a CMS.  We have separate CMS application servers that do.  We are trying to install DI Metadata Integrator on the DI systems.  However the jobs listed in the CMS do not run.  Is install of Metadata Integrator on a nonCMS system supported?

    Found a solution, see link below
    http://www.forumtopics.com/busobj/viewtopic.php?p=581371&sid=ee3cd084cfd9010cfda6665224f809e1

  • Installing Metadata Integrator alone??

    Hi,
    I want to know if it is possible to install Metadata Integrator in a Windows machine alone if my Data Services XI 3.2 and Business Objects Enterprise XI 3.1 SP2 are install in other server on Unix Platform. My question is because Metadata Integrator can´t be install on Unix Platform and I need to make some Lineage and Impact analysis between these systems. If not, the only workaround that I have is to install Business Objects Metadata Management (this product can be install on Unix)in the same server to do this analysis???

    Pagemakers wrote:
    > When I say 'crap' I am not saying the apps are crap, I
    just mean I have
    > absolutely no interest in them and I don't want them on
    my system.
    This is the point I don't understand. How do you know you
    have no
    interest in them if you have never tried them? If Dreamweaver
    had
    integrated the ability to preview sites on mobile devices as
    a core part
    of the program, I imagine that many people would have said
    "how cool".
    Because Device Central is shared with Photoshop, Illustrator,
    and Flash,
    the reaction is "not interested".
    > If I install DW CS, that and only that is all I expect
    to install.
    There's no argument that the installer should let you pick
    and choose.
    > I have reverted back to DW8 until this gets sorted. From
    what I have seen
    > there is little difference anyway.
    I have no idea what Adobe's plans are, but I would be very
    surprised if
    the policy is changed before the release of the next version.
    As for
    there being little difference between DW8 and CS3, I don't
    agree. The
    improvements in CSS rendering and CSS management are far from
    insignificant. If you use client-side validation, the Spry
    validation
    widgets are stunning.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Problems with Metadata Integrator noClassDefFoundError

    Hi,
    we have installed Business Obejcts on three different hosts.
    1. Host: SQL Server 2008 for the repositories
    2. Host: Business Objects Enterprise XI 3.1 SP3
    3. Host: Data Services 3.2 incl. Metadata Integrator + Job Server + Access Server
    If I try to configure the Metadata Integrator, I got the following error at the command prompt in the background
    Exception in thread "worker" java.lang.NoClassDefFoundError: com/crystaldecisions/sdk/exception/SDKException
    at com.acta.crystalrepo.config.crCompletedPage.execute(crCompletedPage.java:126)
    at com.acta.crystalrepo.config.crCompletedPage.access$000(crCompletedPage.java:14)
    at com.acta.crystalrepo.config.crCompletedPage$1.run(crCompletedPage.java:77)
    at java.lang.Thread.run(Thread.java:595)
    DB connection works fine
    But the state stays at
    Save Configuration .... Succeeded
    connect to CMS "Pending"
    Register program object ... "Prending"
    Have I forgotten to install something?
    I have already seen lesson "To configure Metadata Integrator after Installing SAP BusinessObjects Enterprise". But I am not sure what to do.
    Please help me.
    Alexander

    Thank you for your help.
    Do I have to install the BOE SDK Runtime on my Host for Data Services? I have found on the service marketplace a downloadfile with cdlabel.asc "BOBJ ENTERPRISE XI 3.1 SP3 NET SDK Runtime SP3". Should I install this package?
    Which is the correct path for the BOE SDK if I don't have to install the sdk? I have installed Data Serive under the default path
    "C:\Program Files (x86)\Business Objects"?
    Thank you.

  • BOE XI 3.1 - Metadata Integrator - DataServices 12.0 - Impact/Lineage

    I am having issues with getting impact and lineage to work.  I have the following installed:
    - BOE XI 3.1
    - DataServices 12.0
    - Metadata Integrator as part of the same DataServices installation
    Everything is installed and working well...independently.  Once I found the new way to secure program object execution, I was able to get the Metadata Integrator program under the \DataServices directory in the CMC to execute successfully.  I then go into the Data Services Management Console and expect to see Impact/Lineage.  However, there is nothing there to choose.
    I have DI Designer set to save column mappings when saving the dataflow, and I have run that program mentioned above.  When I go into the Settings hyperlink of the Impact/Lineage section of the console, there is not a Repository in the dropdown list for Settings.  There also isn't a Job Server in the dropdownlist for "Refresh Usage Data" even though I have a working/running DI Job Server.  FYI, I am running IE7.
    Finally, I went ahead and tried to create a Business Objects Connection.  I get the error message:
    Business Objects repository tables do not exist in this database.
    That seems to be a big red flag since I am accessing BOBJ tables in that exact database to have the CMC/Infoview work successfully.
    Am I dealing with a version problem between products, or am I still missing a fundamental step to get this to work correctly?  Are there issues with IE7?  The Administration portion of the Data Services Management Console seems to work just fine.  FYI, I was able to create a CMS connection there, also.
    Thanks for the help,
    Brian

    you don't see the lineage for BO since its not collected the cmsCollector is failing
    you don't have to upgrade all DS component, you can use the DS 12.1.1.0 Metadata Integrator component only, this is an Independent component and is dependent more on BOE than DS
    is all DS component Installed on same machine ? in that case you will have to install the Metadata Integrator Component on different machine and copy the %LINK_DIR%/ext/cmsCollector folder to your current installation (rename the current cmsCollector folder to cmsCollector120) and run the following script to setup the env and path for Metadata Integrator
    if this doesn't work remove this folder and restore the old cmsCollector folder back, everything should be same as earlier
    do this if you are comfortable with doing manual setups
    put the following in a cmd file named setupMI.cmd, in the %LINK_DIR%/ext/cmsCollector folder
    and run the cmd file from th ecommand line, only thing that you will have to set if different in the script is BOE_SDK path
    set local
    set BOE_SDK=C:\Program Files\Business Objects\common\4.0\java\lib
    set INSTALL_DIR=%LINK_DIR%
    set JAVA_HOME=%LINK_DIR%\ext\jre
    rem following is complete single line
    "%JAVA_HOME%\bin\java.exe" -classpath "%INSTALL_DIR%\lib\loader.jar;%INSTALL_DIR%\ext\cmsCollector\lib\cms_md_collector.jar" -Djava.system.class.loader=com.bobj.ConfigurableClassLoader -Dclassloader.properties="%INSTALL_DIR%\ext\cmsCollector\classloader.properties" -Dink_dir="%INSTALL_DIR%" -Dboe_dir="%BOE_SDK%"  com.acta.crystalrepo.config.crConfigureCommands "%INSTALL_DIR%\ext\cmsCollector\/" "%BOE_SDK%\/" "%INSTALL_DIR%\/"

  • Issue in configure Information Steward 4.1 Metadata integrator with BO 4.1

    Hi Experts,
    Environment
    Machine 1 :BO 4.1
    Machine 2: IPS 4.1,DS 4.2,IS 4.2
    We need to get the BO 4.1 metadata into information steward .As per IS install guide "If machine 1 has BI platform 4.1 SP1 and machine 2 has Information Steward installed on IPS 4.1, then you do not need to install the Remote Job Service utility. IPS 4.1 SP1 can collect metadata directly from a BI platform 4.1 system because the BI SDK is compatible between IPS 4.1 SP1 and BI platform 4.1 SP1.3"
    what else we need to configure ?
    Do we need to install 4.1 client in IS installed machine?
    I'm getting below error when trying to add integrator
    CMS Server name : BO 4.1 cms name , user name&PWD : BO 4.1 user and pwd
    Infoview Integration user:BO 4.1 user&Pwd
    Thanks in advance for help.

    Hi Satish,
    You must install the BI Client tools in IPS server (make sure that BI Platform in Machine 1 and BI Client Tools in Machine 2 must be of same version including support pack). Then before creating metadata integrator connection in IPS, try to connect BI server in Machine 1 from Client tools in Machine 2. For this you can use, UDT / IDT / WebI Rich Cleint to test whether Machine 2 is able to connect Machine 1 or not. If you failed at this level, then there problem with Firewall or port issue. We have to fix this before moving ahead.
    If above test is passed, then go to IPS - CMC, check whether ISJobServer service is available, enabled and running. Disable this service and check what services are included under this. Check all the services related to IS is included or not. If not include all services, enable and restart the server.
    Then you create the BOE Integrator source connection.
    Thanks,
    Ramakrishna Kamurthy

  • Export Metadata for Deski Report failed with Metadata Integrator

    Hi everybody,
    We installed 2 weeks ago BusinessObject Data Integrator 3.0. As we also have BusinessObject XI 3.0, we have installed the component Metadata Integrator on our BOXI 3.0 server. We configured it successfully and the Metadata Integrator program was added to our BOXI repository.
    Then, we executed the Metadata Integrator program from the CMC console. The job run successfully but when we looked at the log file we realized that the program was not able to create the metadata for the BO Deski reports in our BODI repository whereas it was able to do it for our BO Universes. Then when we access the Impact and Lineage Analysis tool from the BODI management console, we can only see the metadata for our BO Universes but not for our Deski reports !!
    Start universe collection: 1 universes to process.
    Universe collection progress: 1 of 1 completed
    Desktop Intelligence document collector thread started.
    Start Crystal report collection. 0 reports to process.
    Start Desktop Intelligence document collection. 1 reports to process.
    DeskI document . Unknown exception while making call to log into CMS Server SVR-BOXI-DEV.cctl.lu:6400. Logon failed
    DeskI document . call to log into CMS Server SVR-BOXI-DEV.cctl.lu:6400 failed
    DeskI document . DeskI document . call to log into CMS Server SVR-BOXI-DEV.cctl.lu:6400 failed
    DeskI document . Collection failed. Correct errors indicated in the log and rerun the integrator.
    Desktop Intelligence collection progress: 1 of 1 completed
    Any ideas ?!

    Helo,
    The "Member/Alias" problem is solved by using the command "REPALIASMBR" and the "parent/child" is solved in two steps:
    1 - Use the command "INDENTGEN" to indent on your flat file
    2 - Run an custom script (in my case PERL) on your file to transform that "indent" into parent child (the member indented is the parent of the previous ones)
    Another solution is to use "OlapUnderground Outline Extractor" that do all that work for you.
    http://www.appliedolap.com
    hope that helps.
    Fabiano
    Edited by: user10938852 on 27/03/2009 10:33

  • Metadata Integrator

    I have problems to get the Metadata Integrator work properly. When I'm doing a lineage analysis from a report in the Management Console I got the error message "Unable to retrieve columns from Data Services".
    Data Services 3.1 is running on a Win 2003 server and BOE XIR2  SP2 on another Win 2003 server. I have installed the Metadata Integrator component on the BOE server and it's executing without any problems.
    Anyoney who have seen the error message before?

    you will get this message if there is some problem with getting the details of column from Dataservices Repositroy for the filed/column used in the Report
    is the column mapping calculated successfully for the repository ?
    is it happening for lineage of one report or for all the reports ?
    if you know the table and datastore from which the columns are coming for this report, try checking the lineage for that table from the Datastore, or other report where this column could be used

  • Metadata Integrator not displayin cms details

    Hi,
    I can successfully access  Impact And Lineage  from the DI Management Console, but all I can see on the left hand side pane are the repository and the datastores. CMS information is not being displayed.
    Nothing at all is displayed in the right hand side pane when clicking/hovering over any of the present objects in the left hand side pane.
    Installed are:
    DI 11.7
    BOE 11.5
    CMS and DI are installed on the same server and I can successfully configure Metadata Integrator by running the tool which creates the appropriate folder in the CMC. The collector runs successfully as well.
    Any help much appreciated.
    Regards,
    Regine

    Metadata Integrator can't run on BOE CMS, Program JobServer running on Unix/Linux
    you will have to configure the BOE CMS and Program Job Server on windows on the same machine where DI Metadata Integrator is installed
    The cmsCollector application is dependent on DeskI and Universe COM Interface which is not available on UNIX, hence the limitation
    its not documented in 11.7, if you have access to following link, then you can check for steps in Data Services Documentation
    http://help.sap.com/businessobject/product_guides/boexir31/en/xi31211_ds_technical_manuals_en.pdf
    search for following
    Configuring Metadata Integrator in a distributed environment

  • [MetaData Integrator] - Unable to run in CMC

    Hi,
    I install and configure correctly Metadata Integrator.
    But when I run it under the CMC I have the following:
    Title: Metadata Integrator_1
    Document Type: Program
    Status Failed
    Destination: Default
    Owner: Administrator
    Server Used: RIETI.ProgramJobServer
    PID: 7496
    Folder Path: Data Services/
    Remote Instance: No
    Creation Time: 01/09/2009 18:31
    Expiry: 01/09/2019 18:27
    Start Time: 01/09/2009 18:31
    End Time: 01/09/2009 18:31
    Error Message: The Program Object reported an error while running, but no error code was provided.
    I use the correct Program logon credentials for the server.
    Thanks for help

    Hi,
    I use BODS XI 3.2 with BOE XI 3.1 SP2.
    When using command line, the output is:
    CMS Version: 1220
    Locale= en_US
    CMS Version: 1220
    Metadata Integrator version: 12.2.0.0
    CMS folder processed [Universes]
    CMS folder processed [Report Conversion Tool Universes]
    CMS folder processed [webi universes]
    CMS folder processed [Administration Tools]
    CMS folder processed [Auditor]
    CMS folder processed [da]
    CMS folder processed [de]
    CMS folder processed [en]
    CMS folder processed [es]
    CMS folder processed [fr]
    CMS folder processed [Rapports Crystal Report]
    CMS folder processed [it]
    CMS folder processed [ja]
    CMS folder processed [ko]
    CMS folder processed [nb]
    CMS folder processed [nl]
    CMS folder processed [pl]
    CMS folder processed [pt]
    CMS folder processed [ru]
    CMS folder processed [sv]
    CMS folder processed [th]
    CMS folder processed [zh_CN]
    CMS folder processed [zh_TW]
    CMS folder processed [Data Services]
    CMS folder processed [Dossiers utilisateur]
    CMS folder processed [Feature Samples]
    CMS folder processed [Report Conversion Tool]
    CMS folder processed [Report Conversion Tool Documents]
    CMS folder processed [Report Conversion Tool Audit Documents]
    CMS folder processed [Report Conversion Tool Temporary Documents]
    CMS folder processed [Report Samples]
    CMS folder processed [Demonstration]
    CMS folder processed [Feature Samples]
    CMS folder processed [Financial]
    CMS folder processed [Report Data]
    Start universe collection: 5 universes to process.
    Universe [Activity]. Unable to parse response from COM collector. null
    Unable to parse response from COM collector. null
    Universe [Activity]. Collection failed. Correct errors indicated in the log and rerun the integrator.
    Universe [eFashion]. Unable to parse response from COM collector. null
    Unable to parse response from COM collector. null
    Universe [eFashion]. Collection failed. Correct errors indicated in the log and rerun the integrator.
    Universe [Island Resorts Marketing]. Unable to parse response from COM collector. null
    Unable to parse response from COM collector. null
    Universe [Island Resorts Marketing]. Collection failed. Correct errors indicated in the log and rerun the integrator.
    Universe [eFashion]. Unable to parse response from COM collector. null
    Unable to parse response from COM collector. null
    Universe [eFashion]. Collection failed. Correct errors indicated in the log and rerun the integrator.
    Universe [Island Resorts Marketing]. Unable to parse response from COM collector. null
    Unable to parse response from COM collector. null
    Universe [Island Resorts Marketing]. Collection failed. Correct errors indicated in the log and rerun the integrator.
    Universe collection progress: 5 of 5 completed
    CMS Version: 1220
    Desktop Intelligence document collector thread started.
    Unable to logon to Desktop Intelligence Application
    Desktop Intelligence document collection failed with error: Unable to logon to Desktop Intelligence Application
    Start Crystal report collection. 1552 reports to process.
    Crystal Report [1. Jobs per Status]. Start collection for Crystal Report.
    Thanks for help

  • OS 9 Install problem on imac G3

    hello all,
    i have an OS install problem on my imac . I just finished formatting the drive . the drive is
    paritioned :
    1st partition = HD1: 5.5 Gb
    2nd partition = HD2 : 2.5 Gb
    3rd partition = HD3 : 110+ Gb
    Then, in order to save some time ( i thought ) , i tried directly install os 9 from an imac
    DV CD , on HD1 : i thought i d be quicker so i would have to start with os 8.5 then upgrade to 8.6 and etc .
    that turned out to be a bad idea. the system install warned me it couldnt install Air port because the hardware wasnt compatible . it gave me two options : either ignore this message or quit . i chose ignore : again certainly a bad choice .
    After the install was finished , the mac wouldnt start on HD1 . the sytem install is apparently incomplete ,or anycase it doesnt work .
    i then installed os 8.5 from original imac tray load install CD on HD2 , and it works fine .
    now the question is : what should i do with my bad os9 system ? i need an operating system on this partition. perhaps i can trash it and reinstall mac os8.5 on it ? i hope there is a way to get out of this without formatting the drive again .
    thanks for any advice .

    about the os9 CD : it is a retail verson , only not of the same imac model .
    That is not a retail version of OS 9. A retail version of OS 9 has no dependencies on any model of Mac. You have a machine specific disc which probably won't work with your iMac.
    1/ i dont know how to reformat a partition without formatting the entire drive . perhaps you can explain .
    In OS X you use Disk Utility and only select the partition that you want to reformat. It has been ages since I used OS 8 so I'm not sure if it is even possible using "Drive Setup".

  • Nano install problems. Works on USB 1.1!

    Twelve months ago I went through the getting an IPOD to install properly problems with my son's IPOD, on his all singing all dancing new PC. Only finally resolved this by installing via the firewire port rather than USB. Therefore it was with some trepidation that I recently got a Nano for my wife's birthday, but hey I thought someone like Apple would have got their act together in the interim and installing should be straight forward. Have they? NO! Tried installing the Nano on my aging Pentium III which has a USB 2.0 PCI card, and for which all other devices plugged into it worked OK. Couldn't even get Windows to properly recognise it "A problem occurred during harware install your device may not be working properly". Tried Apple's suggestions and other users suggestions all to no avail. Firewire install option is not a possibility with Nano, but finally thought why not try one of the USB 1.1 ports on my aging computer, and guess what it installed first time and works without any problems. Transfer rate is not to bad either 850 songs in 1hr 10min. The only slightly different thing I did (which some other users also say) is not to re-boot the computer at the end of installation when it prompts you to and start using Itunes straight away and do some downloading then re-boot later.
    Not much comfort to users with newer PC's but if you have an older computer with a USB 1.1 port and have install problems, try it as it may work for you as well.
    Like every one else with install problems on PC's I say "come on Apple" individually or together with Microsoft please get this sorted out. My view of Apple was that they have great products (still true) that are easy to use (still true) and install without problems (patently not true).
    Pentium III 800   Windows XP  

    Gosh, I have tried this many times. Over several days. I have also reset the shuffle, which as far as I can tell, consists of turning it on and then off.
    Last night, it started updating the music via the keyboard USB 1.1, which I know takes forever. Then it lost communications and quit.

  • Logic Studio Install Problems

    Purchased Logic Studio a couple weeks ago.  The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it.  Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday.  Install problems continue but now different.  Orginal set woudl load a coiuple of disks then error out.  This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out.  Tried several times and even tried inserting other content disks.  I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
    When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc.  On this set my SoundTrack Pro option is grayed out and I cannot select it to load.  I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did.  Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
    My system config is:
    Processor: 3.4 GHz Intel Core i7
    Memory: 16GB 1333 MHz DDR3
    Graphics: AMD Radeon HD 6970M 2048MB
    Software: Mac OSX Lion 10.7.5 (11G63b)
    1TB Internal SATA Disk (This is the drive I am attempting to load on)
    256GB Flash Storage
    12TB (RAID 5 Configure to 6TB) Pegasus External
    This evening I will call Apple Support again, but any advice from the audience is much appreciated.
    Signed: Frustrated but Determined

    Purchased Logic Studio a couple weeks ago.  The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it.  Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday.  Install problems continue but now different.  Orginal set woudl load a coiuple of disks then error out.  This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out.  Tried several times and even tried inserting other content disks.  I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
    When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc.  On this set my SoundTrack Pro option is grayed out and I cannot select it to load.  I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did.  Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
    My system config is:
    Processor: 3.4 GHz Intel Core i7
    Memory: 16GB 1333 MHz DDR3
    Graphics: AMD Radeon HD 6970M 2048MB
    Software: Mac OSX Lion 10.7.5 (11G63b)
    1TB Internal SATA Disk (This is the drive I am attempting to load on)
    256GB Flash Storage
    12TB (RAID 5 Configure to 6TB) Pegasus External
    This evening I will call Apple Support again, but any advice from the audience is much appreciated.
    Signed: Frustrated but Determined

  • BHOLD FIM Integration install failed with Null Pointer Exception

    Hi,
       I started BHOLD installation and completed Core and FIM Provisioning installs successfully. However, FIM Integration install keeps on failing while running FIMCustomization.exe with the following error:
    Unhandled Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Object reference not set to an instance of an object. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose
    value is:
    System.NullReferenceException: Object reference not set to an instance of an object.   
    at Microsoft.ResourceManagement.ObjectModel.RmAttributeValue.ToString() in d:\_Bld\10\16\Sources\main\src\samples\BHOLD\2011 R2\FIM Integration\Microsoft.ResourceManagement.ObjectModel\RmAttributeValue.cs:line 146  
    at WorkFlowProviderForFIM2010.WorkFlowProvider.TransformFimToXml(RmResource aFIMobject, Boolean asDirty) in d:\_Bld\10\16\Sources\main\src\samples\BHOLD\2011 R2\FIM Integration\WorkFlowProviderForFIM2010\WorkFlowProvider.cs:line 957   
    at WorkFlowProviderForFIM2010.WorkFlowProvider.QueryObjects(String objectType, String attributeName, String dn, String[] attributes) in d:\_Bld\10\16\Sources\main\src\samples\BHOLD\2011 R2\FIM Integration\WorkFlowProviderForFIM2010\WorkFlowProvider.cs:line
    890   
    at BHOLD.RoleExchangePoint.BHOLDRoleExchangePoint.QueryObjectsX(String objectType, String attributeName, String dn, String...).
    I was able to generate the error when I run FIMCustomization.exe from command prompt. "C:\Program Files (x86)\BHOLD\FIM\FIM Customization\FimCustomization.exe" /apply "BHOLD-customization.xml" server MyComputer:5151
    The account running the install is part of FIM Administrators.
    What might be the issue?

    Hi Saurabh,
    FimCustomization.exe keeps crashing for me as well. I figured out it is all about the accounts that you are using. I have wrote a blog post that shows the scenario that worked for me. Hope it will help you.
    http://social.technet.microsoft.com/wiki/contents/articles/22621.fim-2010-installing-bhold-fim-integration.aspx

Maybe you are looking for