DI Server installation and connection with PHP

hello,
We've installed DI Server, started it, but the WSClient file comming with the installation doesn't work.
a) Is the IIS needed for the DIServer to work?
If not, what do I need to do to be able to connect to the DIServer. There's no WSDL file with the DIServer.
b) Do I need to create my own WSDL file and put it on a Web folder?
I say this because I'm trying to connect with PHP to the server and PEARClient from PHP needs an URL (normally the WSDL file) to connect. It's just too confusing and there is no much help in the documentation.
thanks and greetings,
Guillem Barnolas.
www.softime.es

DI server provides you a simple COM interface that
accepts SOAP commands and returns you SOAP reply.
The format of these SOAP messages is in the SDK
documentation.
You should build your own web infrastructure on
top of this mechanism.

Similar Messages

DI Server Installation and connection

hello,
We've installed DI Server, started it, but the WSClient file comming with the installation doesn't work.
a) Is the IIS needed for the DIServer to work?
If not, what do I need to do to be able to connect to the DIServer. There's no WSDL file with the DIServer.
b) Do I need to create my own WSDL file and put it on a Web folder?
I say this because I'm trying to connect with PHP to the server and PEARClient from PHP needs an URL (normally the WSDL file) to connect. It's just too confusing and there is no much help in the documentation.
thanks and greetings,
Guillem Barnolas.
www.softime.es

Guillem,
You do need to install a web server such as IIS to utilize the DI Server.
The documentation that comes with the SAP Business One SDK on the DI Server gives you all of the requirements and installation steps as well as sample code. You may want to look at this in the SDK Help Center that is installed with the SDK.
Also, your question on the DI Server pertains more to the SAP Business One Discussion Forum. This forum is for individuals that are working with the SAP Business One Integration Technology.
HTH,
Eddy

Need Help in installations and connecting displays. Please!

Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.

TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH)

Hi,
I just want to know,
What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH).
if support already,
how can i setting.
plz. help me!!!

The following blog states that SQL Server "leverages the SChannel layer (the SSL/TLS layer provided
by Windows) for facilitating encryption. Furthermore, SQL Server will completely rely upon SChannel to determine the best encryption cipher suite to use." meaning that the version of SQL Server you are running has no bearing on which
encryption method is used to encrypt connections between SQL Server and clients.
http://blogs.msdn.com/b/sql_protocols/archive/2007/06/30/ssl-cipher-suites-used-with-sql-server.aspx
So the question then becomes which versions of Windows Server support TLS 1.2. The following article indicates that Windows Server 2008 R2 and beyond support TLS 1.2.
http://blogs.msdn.com/b/kaushal/archive/2011/10/02/support-for-ssl-tls-protocols-on-windows.aspx
So if you are running SQL Server on Windows Server 2008 R2 or later you should be able to enable TLS 1.2 and install a TLS 1.2 certificate. By following the instructions in the following article you should then be able to enable TLS 1.2 encryption
for connections between SQL Server and your clients:
http://support.microsoft.com/kb/316898
I hope that helps.

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID?? For example, I have an IPAD and a Macbook Pro. Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID?? For example, I have an IPAD and a Macbook Pro. Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

I have also tried changing the contact emails(you can contact me by) in Facetime(diff email for IPAD and Macbook Pro). Facetime tried the call, I see the accept buttom appear and it goes away as the call never connects? Any ideas??

I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Oracle 11g Server Installation and Configuration

Hi All..
I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
This is for a server and we might even need to replicate the entire DB.
Can any on please help me out in this .
Thank you

Hi,
Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
Regards,
Hussein

InDesign Server Installation and Configuration Guide

Hi everybody
I try to ask one silly Q.
Where can I get this document.
I found many references but no link :(

There is no document titled "InDesign Server Installation and Configuration Guide". This was an error in the CS2 version of Introduction to InDesign Server.
You'll find the CS2 version of Introduction to InDesign Server in the InDesign Server CS2 ESD (the server download bundle). Even better you'll find the CS3 version in the InDesign CS3 Server SDK. Available at the following URL:
http://www.adobe.com/devnet/indesign/
The information about Java/CORBA is specific to CS3, but the information about scripting and SOAP applies to CS2.
Let me know if that helps, or you still need something else.
Regards,
Heath Lynn
Developer Technologies
Adobe Systems

HT201302 Even though there are over 200 photos on my ipad, after trying both methods of importing and connecting with a lead, a message appears saying that there are no photos on this device. Any ideas?

Even though there are over 200 photos on my ipad, after trying both methods of importing and connecting with a lead, a message appears saying that there are no photos on this device. Any ideas?

Did you connect your iPad to your computer then open the application on your computer that transfers photos from a camera? Your computer should recognize the iPad as a camera. All photos in the Camera Roll on the iPad should then be seen and you should be able to copy them to the computer using that application.
Photos that were synced to your iPad by connecting to your syncing computer cannot be copied back this way as the master file for those photos are on the syncing computer.

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Solution may be found if you search in the "More Like This" section over in the right column.

Using a dongle and connecting with an Xbox 360...

Hi guys,
Quick question, i've moved into my new uni place but it hasn't got any internet. So im looking at getting a dongle but I still want to hook up my xbox to xbox live. Is there a way of feeding the internet through my imac (which is using the dongle) to the xbox. If its any help i do have the extra wireless box for the xbox and also an either-net cable.
Thanks!

You X-Box can connect to the internet thru the Mac using either wifi or ethernet, whichever works best for you.
If you want Ethernet, connect a cable between them
If you want wifi, you need to first create a network.
System prefs -> Network.
Select Airport then click on Network name: and select *Create network...*.
Give it a name, tick require password.
Now go System prefs -> Sharing.
Click on *Internet Sharing*.
Set *Share your connection from:* and select the dongle (likely showing up as USB).
If you connect them using Ethernet, set *To computers using:* and select Ethernet.
If you connect them using wifi, set *To computers using:* and select Wifi.
You will need to enable wifi on the X-Box and connect with the password you set above.

"X-Server Unable to connect with Display :0..."

When i rebooted my Solaris 8 Server, i am unabel to get my login screen. It displays a message like "Ther X-Server Unable to connect with DISPLAY :0...". Can anybody tell me how to rectify this problem.

Hi Kanstantin,
Ieve tested the database connectivity through sqlplus using SYSTEM. But when I try to connect (Mount the repositiry server from MDM console, I facing the problem mentioned.
Please let me know if I need to do anything else.
For your info:
The following are the tnsnames entries
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
MD7 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = mysapplm)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = MD7)
      (INSTANCE_NAME = MD7)
      (GLOBAL_NAME = MD7)
    (HS = OK)
The following are the entries in listener.ora file
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = I:\oracle\MD7\102)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = mysapplm)(PORT = 1521))
Regrads,
Varadhu
Edited by: Varadhu on Aug 6, 2009 10:49 AM

Im not able to connect to app store with my apple id after i trying to logout and connect with another id. Please help.

im not able to connect to app store with my apple id after i trying to logout and connect with another id. Please help.

The app store has been down for over 8 hours. The following can be used to check on its current status: https://www.apple.com/support/systemstatus/

MBP 9,2 no longer recognizing my 3rd Gen Apple TV - wife's MPB 8,1 recognizes and connects with no issues.

My MBP 9,2 (2.9GHz i7/8GB/750HDD) no longer recognizes my 3rd Gen Apple TV while my wife's MBP 8,1 (2.3GHz/4GB/320HDD) recognizes and connects with no issues. All are running current software.

Hello herbnmyth,
Thank you for using Apple Support Communities.
I see that you are having difficulties with connecting the Apple TV with your computer. The following article provides information for troubleshooting Home Sharing and should help you sort the connections.
Troubleshooting Home Sharing - Apple Support
Regards,
Jeff D.

DI Server installation and connection with PHP

Similar Messages

Maybe you are looking for