DIA-WP has yellow marker in TA SM50

Dear Ladys and Gentlemen,
in our sap-system (sap erp 6.0, kernel 700) one dia work process is highlighted yellow in TA SM50?
Propably the wp-trace was increased or similar ...
How do I get it into normal state?
The wp has already over 90 restarts and it is always the same user and
Transaction MIRO which generates errors (signal 11 from os) on the dia-wp-nr 6 (dev_w06)
The wp is always restartet when the error occurs.
Any idea?
Thank you...
With kind regards,
Martin
Edited by: Martin Kirschey on Sep 1, 2011 9:51 AM

Hi,
I think most probably you have trace activated with specific settings for user / transaction / workprocess, when you see the trace activated check ST12 and try to deactivate from the same.
The kernel might be issue for the errors also.
Thanks and Regards,
Karan Shah

Similar Messages

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

Iphone 4s Yellow mark

Hi Guys, I have an Iphone 4s and a yellow mark appears on my screen whereas my warrantly is expire since February. I go to a Genius Bar and the refuse to take care of my problem. As I saw on Internet it's a latent defect (glue problem) but Apple refuse to recognize it.
I live in France and the European Union rules said that warrantly should be ended 2 years after the purchase date for latent defect.
I'm very disapointed, Iphone was pretty expensive and they refuse to recognize their problem.
Do you know how can I force Apple to solved my problem ?
Thanks for your help,
Regards

There are instances that take time for a company to recognize a problem exists. Such as some recent issues/posts about the battery in the iPhone 3 GS expanding late in life. Eventually that will probably be resolved but some users are getting very annoyed about it now.
There have been questions raised about yellow streaks/casts due to onding adhesive used with some touch screens. Hopefully those issues will be resolved soon by Apple.
All i can offer right now, as a fellow user, is to take the iPhone back and keep complaining and hope someone will finally do something about the problem.

Search Server Error - Illegal operation attempted on a registry key that has been marked for deletion

Hello,
I have a 5 server farm (DC, 2 WFEs, 1 SQL,1 CA w/ search) and am experiencing an issue when returning search results. This issue just started occurring recently, and basically the search page throws a correlation id whenever used. The error returned
is:
SearchServiceApplication::Execute--Exception: System.Runtime.InteropServices.COMException (0x800703FA): Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA)
SearchServiceApplicationProxy::Execute--Error occured: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA) (Fault Detail
is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.Runtime.InteropServices.COMException: Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA)
I even attempted to create an out of the box enterprise search site with OOB masterpages and I still am receiving this error.
I have also tried the ‘Do not forcefully unload the registry at user logoff’ registry edit, but it did not work.
Has anyone ran into this issue and has another solution other than the ‘Do not forcefully unload the registry at user logoff’ registry edit?
Thanks!

IISReset works for me (but after some time it fails again)
Check this posts: http://pacsharepoint.com/2011/11/sharepoint-search-illegal-operation.html
http://blogs.msdn.com/b/distributedservices/archive/2009/11/06/a-com-server-application-may-stop-working-on-windows-server-2008.aspx
hope it helps,

My itunes library has exclamation marks on the whole of my music collection I have to upload my CD's again! does anyone know why and what can I do?

Help, my itunes library has exclamation marks and will not play. Do I have to reload my cd's?

What do you mean by what audio/video formats are involved? These are all files from several digital cameras.
As previously stated, AVI is a file container. It is somewhat old and its originator, Microsoft, dropped official support of it over a decade ago. However, it remains popular with PC users since almost any valid audio and/or video compression format can be stuffed to the file which synchronizes the content by interleaving the individual audio and video frames. The compression format is the specific manner in which the audio and video data are encoded as it is placed in the AVI container. You can find the compression format by inspecting the file in the Finder "Info" window, or in the "Inspector" window of the QT player (or other media player) if the file can be opened.
For instance, one popular compression combination would be to place DivX encoded video and MP3 audio in an AVI file container. However, neither DivX nor MP3 is natively supported by the QT player. (Although iTunes will natively support the MP3 audio.) Therefore, people who wish to play such files in the QT 7 Player would normally install either the DivX component or Perian but not both. Either installation will independently play such files in the QT Player, but if both are installed, the file will usually stop working since these two codecs can create a playback conflict.
However, the AVI container could just as easily contain DV along with DV audio. In this case, the file should play correctly in QT since this compression format is natively supported by the basic component configuration that comes in every current OS installation. Therefore, if such files suddenly stopped playing, this could be an indication that a component has been moved or deleted or that your system or QT embedded structure has become corrupted.

Recovery Point creation fails because change traking has been marked inconsistent

I have a Hyper-v Cluster that is backed up using DPM 2012 SP1, for the last week when recovery point creation attempts to run I receive the following error message.
Change Tracking has been marked inconsistent due to one of the following reasons
1. Unexpected shutdown of the protected server
2. Unforeseen issue in DPM Bitmap failover during cluster failover of one or more datasources sharing the tracked volume. (ID 30501 Details: The parameter is incorrect (0x80070057))
After this error it performs a consistency check, it completes and a backup is stored, but as soon as it does another recovery point creation it fails again with the same error.
I have a Server 2012 R2 Hyper-v cluster with 2 virtual hosts and a quorum disk acting as the deciding vote. The backups completed for a month prior to this with no problems. No event seems to have triggered this problem it is just completely out of the blue.
I have update roll-up 8 on DPM and have both hosts within the cluster updated. They seem to consistently fail on one virtual host and intermittently fail on the other virtual host.
The event logs do not have any errors other than Event ID 1 VDS basic provider

Hi,
Lets see if cleaning up all the filter bitmaps clears up the problem.
To get to a clean state please delete DpmFilter* files from “System Volume Information” using following steps.
1. Open an administrative command prompt and run:
       C:\>fltmc unload DpmFilter (run on all cluster nodes)
2) From one of the Cluster nodes, run:
       C:\>psexec -s cmd (psexec is
www.sysinternals.com tool used to run cmd under system account)
3) In this new command prompt (running as system) run:
       C:\>CD C:\ClusterStorage
       C:\ClusterStorage>For /d %i in (volume*) do del /s "%i\System Volume Information\DpmFilter*"
Note: The * includes (DPMFilterBitmap{Guid}, DPMFilterStatus, DPMFilterLog, DPMFilterTrace*)
4) verify files are deleted by running
        “dir /s /b DpmFilter*”
        exit
5) Then load the filter again on all nodes
       C:\>fltmc load DpmFilter (on all cluster nodes)
6) Run DPM Consistency check against all the VM's to re-start normal protection.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Yellow WP Lines in sm50 -- Why?

<b>Yellow WP Lines in sm50</b>
Hi together,
does someone knows for want logical event are yellow lines in sm50.
So, I know red markers at the error column, but I can't find a description
for what are yellow lines? The whole line in yellow in the backround.
We are running 4.70 with WAS 6.20 and Kernel 640 on System i with V5R3.
greetings,
Carsten Schulz
ebmpapst.com

hi, have a look at sapnote 998.221...might be the case
sap states that under certain circumstances it might be possible that work processes change their trace level (yellow = trace level 2)...be prepared to check your trace files which will grow fast!
can be fixed using kernel patch 640/155....
GreetZ, AH
//rats...someone was faster ggg

Lots of music purchased from iTunes suddenly has exclamation marks

I turned on my Mac this morning and found that lots of my music - stuff that was purchased from iTunes - suddenly has exclamation marks next to it and I get a message saying that the file cannot be found.
Since I have Match, surely the system should find the music in the cloud and simply use that to replace the missing files?
I don't know why they have gone missing - no files have been changed and they were working just fine when I shut the machine down last night.

Hi
No it's on one of the internal HDDs in my Mac Pro and seems only to affect random tunes.
The only way I can find to work around it so far is to delete the tracks from the Mac and re-downoad them from the Cloud.
Seems very odd and is very irritating.Would be quite useful if I could simply do what do with my iPhone - access the music from the cloud rather than locally.
Mind you I still have two tracks from a Led Zeppelin CD of mine that were in the library when I turned Match on and are still listed as 'waiting' and greyed out 7 months later...!

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

Change Tracking has been marked inconsistent after live migration

We run a 3 node Server 2012 R2 cluster and backup using DPM 2012 R2
Everytime a VM is live migrated to another node, when DPM next tries to back it up, the recovery point fails with the "Change Tracking has been marked inconsistent" error and a consistency check needs to be done.
This is fine if one VM is Live Migrated but when we have to put a host in Maintenance mode for some reason and 50 VM's need to be migrated off, it them means 50 consistency checks and our backups go from 2 hours to 8 hours.
Is there a way around this or is this just the way DPM works?
Simon Holman
Expeed Technology
Australian Web Hosting

Hi,
<snip>
please give this on a try: http://support.microsoft.com/kb/2848751
>snip<
Please DO NOT add the forcefixup key - that will make EVERY recovery point use consistency check workflow under the covers - so we basically abandon using the dpmfilter to track block level changes.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Yellow mark - PCI Device" and "Network controller" on Satellite A100-787

There is a yellow mark in the device manager for a driver called "PCI Device" and also for "Network controller" although the network connection (LAN) is working well and all other functions of the computer seem to be working well.
What are those devices??

Regarding the LAN driver, it is installed and working properly (the wired one). The wireless driver is provided by Atheros which I installed from its own setup file and it didnt give me any error so I assume it is installed well although I havent tested the wireless connection yet. I am going to do that shortly.
As for the PCI device, the card reader is able to read Sony memory stick and one type of SD card with certain teeth arrangement but not another card with a different teeth type. I dont know why it is the case. so this remains a mistery to me.

Quicktime icon has question mark on it

Hi,
When I click on some websites,not all, I cannot get in and the screen changes to a Quicktime icon that has question mark on top of it.
I use Mac G5, Panther, FireFox.
Thank you!

For a long time now I'v been also plagued with the same problem Q w/?. until today!! after reading all your problems I figure it out.
I have tried Firefox, Netscrape, Safari and Opera and even an old copy of internet explorer and keep on getting the Q&?.
So I said, what the heck and went for it. Here is what I did. I have a G4 laptop running Mac OS 10.4.10 but I'v been lazy on doing up dates cause I only use it when I'm out in the field doing a photo-shoot. The problem machine was my Dual 2 GHz Power Mac G5 running Mac OS 10.5.
Heres the fix, try this. All I did was copy the folder in your system "library/Internet Plug-Ins" folder from the laptop to the G5 and restart Safari and now everything works with no "Q?" .

Yellow mark in device manager under other devices pci driver for B50 laptop with Windows 8.1 64 bit

Dear All,
in device manager - other devices - pci device is with yellow mark os:windows 8.1 , laptop B5070 series .
in PCI events tab mesage is:
Device PCI\VEN_10EC&DEV_5229&SUBSYS_380117AA&REV_01\00000001004CE00000 was configured.
Driver Name: null
error code 28
pls. suggest how remove yellow mark, suggest or provide link to get compatable driver.
regards,
Mallik
Solved!
Go to Solution.

Good day and welcome to the community.
Based on the device string you included, http://www.pcidatabase.com/index.php returns the following:
Device Id Chip Description Vendor Id Vendor Name
0x5229 Realtek PCIE CardReader 0x10EC Realtek Semiconductor Corp
For reference, here is the link to your mahine's support pages:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
and here is the sublink for the Win8.1 drivers for the device detailed above:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Verify that this class has been marked with the @Entity annotation

Hi,
We have a App level shared lib which does all the JPA related query for an app. And each app can utilize the share lib to get the JPA related query to be done.
For scoping the JPA between App . We have created EMF for each app.
When one app run and does any JPA related action it works fine , but when we try to run second app we are seeing the following error when trying to do JPA specific action .
the @Entity annotation.
[2012-05-23T04:08:16.839-07:00] [WC_Spaces] [ERROR] [] [oracle.webcenter.spaces] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 5825b814-2931-4ad5-8dc3-3e18f66992b7-00000004,0] [APP: webcenterCustom] [[
java.lang.IllegalArgumentException: Unknown entity bean class: class oracle.webcenter.spaces.internal.repository.WcSpaceHeader, please verify that this class has been marked with the @Entity annotation.
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:648)
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:532)
at oracle.webcenter.spaces.internal.repository.SpaceRepositoryUtils.refreshSpaceRows(SpaceRepositoryUtils.java:1791)
Where WcSpaceHeader is an Entity.
For creating emf per App this is the code
private static EntityManagerFactory getEntityManagerFactory()
String appName=Utility.getApplicationName();
EntityManagerFactory emf=sEntityMgrFactory.get(appName);
if(emf==null)
emf=Persistence.createEntityManagerFactory("SpacesReposPUnit");
sEntityMgrFactory.put(appName,emf);
SpacesConstants.LOGGER.info("Caching" +
"EMF for " +appName);
return emf;
My persistence.xml
<?xml version="1.0" encoding="US-ASCII" ?>
<persistence xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"
version="1.0" xmlns="http://java.sun.com/xml/ns/persistence">
<persistence-unit name="SpacesReposPUnit" transaction-type="RESOURCE_LOCAL">
<provider>
org.eclipse.persistence.jpa.PersistenceProvider
</provider>
<class>oracle.webcenter.spaces.internal.repository.WcSpaceHeader</class>
<class>oracle.webcenter.spaces.internal.repository.WcSpaceUsrDetail</class>
<class>oracle.webcenter.framework.service.jpa.WcCommonXlationEntity</class>
<class>oracle.webcenter.spaces.internal.repository.WCNavigationActivity</class>
<properties>
<property name="eclipselink.session.customizer"
value="oracle.webcenter.spaces.internal.repository.SpacesEclipselinkSessionCustomizer"/>
</properties>
</persistence-unit>
</persistence>
One more problem i am seeing in this is that . When i create an EM from EMF (which is diff for diff app) and doing some query i am getting a class cast Exception.
(self-tuning)'] [ecid: 5825b814-2931-4ad5-8dc3-3e18f66992b7-00000004,0] [APP: webcenterCustom] [[
java.lang.IllegalArgumentException: Unknown entity bean class: class oracle.webcenter.spaces.internal.repository.WcSpaceHeader, please verify that this class has been marked with the @Entity annotation.
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:648)
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:532)

This is a class loader issue, somehow you have deployed the same classes in two places, so have two different versions of the classes.
How, exactly have you deployed things, where are your domain classes?
The issues is most likely that,
Persistence.createEntityManagerFactory("SpacesReposPUnit");
will always return the same factory once it has been deployed.
If you pass a properties map to createEntityManagerFactory and set the property "eclipselink.session-name" to a unique value, then you should get a new factory.

DIA-WP has yellow marker in TA SM50

Similar Messages

Maybe you are looking for