Diacritics not pasting correctly

Dear all,
I have attached a 2 page sample of a recent PDF document in English with a few diacritics. When I copy some text from the PDF to MS Word 2003, the pasted letters are fine but the diacritics come out as gobbledegook. Any suggestions please??
Thank you,
Ju

My pdf document declares at the beginning that its font is'Set in 10 on 12.5 pt Photina'. Does that help - is that a Unicode font? When I paste into MS Word, the font shows as PhotinaMT. I have tried every font in MS Word but none will display the diacritics correctly.
Thanks

Similar Messages

When paste a web link to some web sites it's not pasted correctly.

When I try to paste a link (for example I've copied an image adress by pressing right mouse botton "copy image url") than i try to paste it in conversation or a new thread on forum but it's not pasted correctly. Only image name is pasted including .jpg but full adress isn't i mean instead
http://www.iphones.ru/wp-content/uploads/2012/09/ip5-plus22.jpg
only
ip5-plus22.jpg
is pasted.
It's so inconvenient. Can anybody advise how to stop this?
Thank you!

Pardon the intrusion.
Very very very glad to see you here again

Captivate 5 not pasting correct screenshots from Snagit

Sometimes Captivate will paste the previous pic instead of my most recent pic from Snagit 9.
EG: I want to paste a dog pic from Snagit to Captivate. I copy the dog pic from Snagit and paste it into CP5; however, I get the cat pic I pasted the time before into CP5 from Snagit. Thinking I didn't copy the dog pic correctly, I went back into Snagit and recopy the dog pic and again tried to paste it--CP5 pasted the cat pic.
I tested pasting the dog pic into MS Word and it works just fine. I copy the dog pic from MS Word and go back into CP5 and paste...AND AGAIN...the cat pic displays. I've cleared CP5 cache (which I thought might be the culprit) but that wasn't it. The only way I can fix the copy/paste problem is to close Captivate entirely (not just the doc but the entire program).
Has this happened to anyone else? What did you do to resolve the problem?
-Frustrated in St. Paul

There have at times been issues with trying to use the Clipboard to paste images into Captivate. You are better off saving your image from Snagit as a JPG or PNG file to a folder, and then using the Captivate INSERT > Image function to get the image into your project.

Hyperlinks not pasting correctly

Hi Ladies & Gents –
I just migrated an excel spreadsheet to numbers, and I'm having trouble posting Numbers-generated hyperlinks into my mail program.
The spreadsheet looks roughly as follows
Name Link Labeled Link
Lions http://blah.com/Lions blah.com
Tigers http://blah.com/Tigers blah.com
Bears http://blah.com/Bears blah.com
The blah.com's in column c are hyperlinks generated with the hyperlink function and looks as such:
=HYPERLINK(B1,"blah.com")
But when I copy and paste these into the mail application, which is what they are generated for, they get paste as just the link text (blah.com) and lose the actual hyperlink.
Any help would be greatly appreciated. Thanks!
– Emerson

It appears that you misunderstood what the function is designed to do.
The HYPERLINK function creates a clickable link that opens a webpage or new email message.
HYPERLINK
(url, link-text)
• url:
A standard universal resource locator. url is a string value that should contain a properly formatted universal resource locator string.
• link-text:
An optional value that specifies the text that appears as a clickable link in the cell. link-text is a string value. If omitted, url is used as the link-text.
If you omit the link-text parameter, the cell value will be the ORL itself so copying will behave as wanted
but if you gave the link-text parameter, the cell value will be this parameter and it's this one which you will get after a copy cell.
To achieve what you are trying to do in both cases, you must copy the "string shaped as an URL", not the Hyperlink.
Yvan KOENIG (from FRANCE jeudi 14 mai 2009 15:20:31)

Accent marks in Spanish--diacritics--not displaying correctly

When I open documents I have created in Spanish, or Spanish language words that appear in largely English language documents, the diacritical marks (accepts, umlats, etc.) all appear with odd symbols, sometimes two or three, like capital letters, etc. instead of the accent mark in a word, such as Simón Bolívar.

With which encoding as those pages saved and with which encoding are you opening them?
Sounds that they were saved as Unicode and opened as a Western encoding.

When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7." Reistallation impossible!

When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."
Reistallation of older or up to date iTunes versions is impossible because: "Installation package iTunes.msi is located on a network resource not available" and because "It is impossible to remuove thew previous verson of iTunes. Impossible fto find the path."
Someone can help me ???
Thank,
Gerald

Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I attempted to download a song. It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

Hello Whitney262,
Thanks for using Apple Support Communities.
I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases. The article below will walk you through the entire process:
Download past purchases
http://support.apple.com/kb/ht2519
Take care,
Alex H.

HT203175 My Windows XP recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes." I have never had problems in the past. Is this a real m

My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade. I have never had problems with iTunes in the past. Is this a real message or perhaps a virus?
Before I reinstall iTunes, any thoughts?

It's a real message.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks. If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?! I've rebooted the iPad & my wireless card several times but neither action helped. Have any clue what I should do now?

Vista itunes not installed correctly. Error 7. Windows error 998. Itunes helper not installed correctly. Service Apple Mobile Device failed to start. Insufficient privileges.

OK, spent about 25 frustrating hours so far this weekend doing everything recommended on numerous threads here -- uninstalling and reinstalling itunes and all Apple items. Help?
I am using Windows Vista home premium. After the last iTunes update to 12, it suddenly would not work. I followed, to a T, all instructions to uninstall all Apples software, in the correct order, reboot, download the latest iTunes, run as administrator, plug in the iPhone 5S, let the driver install, and then finish.
Along the way, I received the error that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I am the administrator and have privileges. (I previously followed instructions from anther thread to change the read-only privileges for Apple folders, but to no avail. I also deleted every file with the word Apple in it after I uninstalled everything.) I did a retry and then an ignore during installation of the AMD error, which I have received 10 times.
The other error I keep getting is: "iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7." I have done that 20 times.
Other frequent error: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)."
I followed other threads suggestions to install Windows .NET versions 3.5 and 4.0. No help. I also looked for various specific Apple files in various folders for DLLs, etc. Not present. I have rebooted 50 times and tried different users on my home account as well. Nothing.
I also followed instructions to Manage my computer under "services." Under Apple Mobile Device, the setting is for "automatic." When I try to get it to "start," the error I receive is "Windows could not start the Apple Mobile Device on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." (I followed previous thread instructions to use the CMD prompt to stop it. That caused problems because the status was then "stopped," but I was able to restart it later once I figured that out -- but with the 1053 error again.)
I think I've tried every suggestion in every thread for the four errors I keep getting (AMD failed to start; iTunesHelper Error 7; Windows error 998; and AMD Error 1053.) I am fresh out of ideas and very frustrated. I mostly want to make sure I don't lose my music and photos, which I was about to sync.
The only other thing I see that is strange on my computer (which I discovered along the way) is that I cannot receive automatic windows updates and have not had an update since 2012. My iTunes worked a month ago, so that was obviously not a show-stopper in the past, but perhaps there is a Vista update I need for iTunes 12? I have service pack 2 for Vista. I have followed all threads to try to set my windows to automatic update, but no joy there either. It checks for updates and then fails. I followed instructions and did run an installation to install windows automatic updates, but that doesn't work either. I tried 10 times. It runs and takes a while, but is never able to successfully update windows. It says "checking for updates" for a while. Then it dies. My last update was 6/19/12 (failed) and it says the most recent check was 6/22/12, but I have tried 20 times on 10/31/14 and 11/1/14.
When asked to "Install new Windows Update software" to check for updates, I have done so 10 times. It downloads and installs, but never works.
It's an old Dell desktop computer from 2006, and I'm using an iPhone 5S. I am fresh out of ideas. Anyone really smart here?
Thanks.
Tristan

Upon latest reboot, I also received this error message: "The application failed to initialize properly (0xc0000005). Click OK to terminate the application."
Then I got the iTunesHelper not installed correctly error again.
Then the "Windows can't check for updates" error message.
Then "Apple Push has stopped working." Then a quick DEP error message that disappeared but said something about Apple Push being closed.
I'm also getting denials of service logged by McAffee. Not sure if I'm getting a virus/attack or not.
Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
Thank you for your help!
Tristan

Crystal report not showing correctly in firefox after windows update

From the past six months, crystal reports has been displayed without the print toolbar and the formatting is completely lost in firefox. Previously we found that when we uninstall the windows updates KB2836942, KB2836943, KB2836946, KB2836947, the problem is resolved. But with more and more windows updates that are automatically updated on the servers, it is getting practically impossible to track which windows update creates the problem. There is absolutely no issue in Chrome, IE and Opera; it is only with firefox that this problem occurs; so we feel it is more of a firefox issue than a windows update problem. It is not just in one machine, but we found the same issue at all our customer's servers (more than 10). The servers are a mix of windows 2008, windows 2012 with iis 7. We also observed the same problem on windows 7 machines. We have been recommending firefox as the best browser for our software to all our customers, and with this problem cropping up, we are badly handicapped. Kindly let us know how to sort this issue. We have provided the link below for your perusal. When you open it in chrome it works fine, but on firefox it does not display correctly:
http://54.209.141.3/Reports/Report.aspx?reportname=RptProductWiseSalesDetails.rpt&paramlist=@FromDat,01/01/2011;@ToDat,01/26/2014;@BranchSlno,1;@FranchiseSlno,1;@FirstCol,B;@DateType,B;@SaleChannel,A;@ProductTypeSlno,0;@ProductSlno,6;@ColorSlno,0;@FinancierSlno,0;@ChannelTypeSlno,0;@ChannelSlno,0;@SalesPersonSlno,0;@SaleStatus,L;@BillingType,A;@LoginUser,admin;@LoginBranch,Keerthi%20Triumph%20Bangalore;@Franchise,Triumph;@AddCustomerDetail,0;@SaleCodeSuffix,&loadfromsql=0

Those four updates all relate to the .Net framework, and involve how an ASP.Net application recognizes different browsers.
* http://support.microsoft.com/kb/2836942
* http://support.microsoft.com/kb/2836943
* http://support.microsoft.com/kb/2836946
* http://support.microsoft.com/kb/2836947
Each contains this Note:
<blockquote>There is a configuration switch to be used to revert back to the old behavior: <br>
<pre><appSettings>
<add key="aspnet:UseLegacyBrowserCaps" value="true" />
</appSettings></pre>
</blockquote>
I think the downside of turning off the changes is that IE 11 will not be well supported.
That's all I know so far...

1st Gen iPod touch not working correctly?

I have a 1st generation 8GB iPod Touch. It's not working correctly.
My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
(Highlight the image to see it better.)
This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
My iPod is less than a year old. Can you help?

Vipershark,
I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

I keep getting "iTunes was not installed correctly please reinstall iTunes.Error 7 (Windows error 193) Please help me fix.

After atempting to update to iTunes 11.something (.3 or .4 which I had been avoiding because of past experiences) I get this message when I try & open iTuunes. ITunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 193). I have attempted to download iTunes several times. What can I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Screen Not Working Correctly- Horizontal Lines

For the past few weeks, when I open my computer, sometimes the bottom half of my screen is just a lot of lines or is not working correctly. Sometimes if I tilt the screen enough, it will go away. But I don't know what to do!

First step in user troubleshooting is to turn the phone off and back on. If that doesn't help, then a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will restart. If this does not solve it, then a restore from backup, and finally if necessary, a restore as a new device.
You do not indicate what iPhone version you have. You also do not say if the phone has been dropped or any user damage to the screen. If anything, you can make an appointment with the Apple Store Genius bar to get the hardware checked.

Diacritics not pasting correctly

Similar Messages

Maybe you are looking for