DIAdem 11.1 Service Pack 1 is available

The DIAdem 11.1 SP 1 is now available:
Web links:
English version
English version with DAC
German version
Japanese version
The DIAdem Team

If you have problems with the installation process, please make sure that the following things are done:
Close the NI DataFinder in the system tray (right click and select "Exit DataFinder")
Copy the ZIP file to your DIAdem program directory (in my case that was "C:\Program Files\National Instruments\DIAdem 11.1")
Right-click on the ZIP file after it was copied and select "Run as Administrator"
That worked for me.
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Similar Messages

"DIAdem 2014 service pack 1"

DIAdem 2014 service pack 1 is available now.
English version:
http://www.ni.com/download/diadem-development-system-2014-sp1/5109/en/
German version:
http://www.ni.com/download/diadem-development-system-2014-sp1/5110/en/
Japanese version:
http://www.ni.com/download/diadem-development-system-2014-sp1/5111/en/
Greetings
Walter

I have done exactly what you describe without an issue. Having said that I normally do the upgrade to SP1 with LP and then run the Config Wizard. Then go back and do the CU install and run the wizard again. As I said, I've done it in
one session, but would recommend doing the SP1 first.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Emergency IPS Service Pack to be Posted Later Today

There was an emergency notification last night that I want to be sure everyone has seen:
1. Emergency IPS Version 5.0(5) Service Pack to be Released on 10/28 to Address
CSCsa85330
An emergency service pack will be released later today (October 28, 2005) to address a high severity bug relating to Daylight Savings (bug details below). All version 5.X sensors are impacted. To resolve this bug, this service pack must be installed prior to Daylight Savings which will occur on Sunday, October 30th 2005.
Bug Details:
Bug ID: CSCsa85330
Bug Title: MainApp - core during day when switchover to daylight savings happens.
Description: Within 24 hours after a transition to or from summertime (i.e. Daylight Savings Time), the sensor may become unresponsive and not allow CLI logins if Daylight Savings Time is enabled. The MainApp process will no longer run and a core file will be generated in /usr/cids/idsRoot/log/mainApp/.
The files for the 5.0(5) service pack will be posted later today (target time is 2:00 p.m. U.S. Central). Once available they can be downloaded from the following URLs:
Sensor: http://www.cisco.com/cgi-bin/tablebuild.pl/ips5
IPS MC: http://www.cisco.com/cgi-bin/tablebuild.pl/ipsmc5sp
This Service Pack will also resolve the following known issues:
CSCsb87741 TCP streams with certain ordering may not be properly inspected
CSCsb92206 Sensor boots up in crit level 2
CSCsb87674 4215 IPS 5.0 inline mode stops transmitting packets
CSCsb84996 sensorApp fails to shutdown when sent a SIGINT from mainApp
CSCsc02898 ips sensor 5.0(4) sensorapp aborting.
CSCsc04126 sensorApp aborts for BiDirData ListObj
CSCsc15875 IPS 5.0 is unable to shun E1 channelised inft. ( Serial x/y:z)
Another bulletin will be sent out within 2 hours of the posting of this Service Pack announcing its availability.

A little more information:
If your sensor is not configured for summer-time, then your sensors will not hit CSCsa85330.
If your sensor is running version 4.x, then your sensor will not hit CSCsa85330.
But if you sensor is version 5.x, and configured for summer-time with the default settings which are used in most locations in the United States and possibly other countries. Then your sensor is likely to hit CSCsa85330.
If you are unable to install the 5.0(5) Service Pack you may want to consider disabling summer-time on your sensors before this coming Sunday when the switch over happens.
What happens if your sensor does not get upgraded before Sunday and you are using the summer-time option for handling DayLight Savings Time:
The mainApp process will core sometime during the 24 hours after the switchover happens.
With the mainApp core you will no longer be able to ssh or telnet to the sensor as the cisco userid, or any other userid with administrator, operator, or viewer privelage levels. Any monitoring tool pulling events from the sensor will loose connection to the sensor because the connection is through the web server that is part of mainApp.
How to recover:
If you have a service account, then login using the service account. Switch to user root using the command "su -" and provide the same password for root as for your service account.
As user root you will then need to execute "reboot" to reboot the sensor.
NOTE: The service account unlike the other accounts can still login even after the mainApp crash.
If you do not have a service account then the sensor will need to be rebooted by another means. If the snesor is an appliance you will need to physically power the sensor on and off. If the sensor is an IDSM-2, NM-CIDS, ASA-SSM-10, or ASA-SSM-20, then you will need to login to the switch, router, or asa and reboot or reset the module.
I will keep you posted of any other developments, and let you know when the 5.0(5) Service Pack is available.

How to install service pack or hotfix?

Guys,
My number of installation (help>> about xcelsius) is 12.0.0.121.
I would like to install the service pack and hotfixes available for xcelsius to correct the problems of the tool.
someone can explain me step by step how to do this?
Thank´s all.
Anderson

Hello,
Step 1: Install SP1,this will replace your RTM version of Xcelsius ,you can download it from here.
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Step 2: Install FP1,upon completion of installation the Help > About Xcelsius version should show a build version no; of 12.1.1.344. Again you can download FP1 from here,
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Good Luck!!
-Purnima

SQL Server 2008 R2 Service Packs

Hi,
What's the benefit of upgrading my SQL Server 2008R2 with the service packs that are available for it?
Cheers
Paul

From Wiki........
In computing,
a service pack or SP (in short SP)
or a feature pack (FP)
comprises a collection of updates, fixes, or enhancements to a software
program delivered in the form of a single installable package. Companies often release a service pack when the number of individual patches to
a given program reaches a certain (arbitrary) limit, or the software release has shown to be stabilized with a limited number of remaining issues based on users' feedback and bug tracking such as bugzilla.
In large software applications such as office suites, operating systems, database software, or network management, it is not uncommon to have a service pack issued within the first year or two of a product's release. Installing a service pack is easier and
less error-prone than installing many individual patches, even more so when updating multiple computers over a network, where service packs are common.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Service pack 6

When will servic pack 6 become available? We are using alot of custom tags
          in our application and the performance hit of classloader really hurts.
          Sincerely,
          Michael Butler


Hi all,
          why wasn't service pack 6 annonced to "annonce" newsgroup? How would I
          know when it's released? Where is the official annoncement?
          Mathieu
          Jong Lee wrote:
          >
          > GA today!
          >
          > Jong
          >
          > "Michael Butler" <[email protected]> wrote:
          > >When will servic pack 6 become available? We are using alot of custom tags
          > >in our application and the performance hit of classloader really hurts.
          > >
          > >Sincerely,
          > >
          > >
          > >Michael Butler
          > >
          > >

Difference between Service Pack 5 for CR-XI (R2) and BOE-XI (R2)

Difference between "Service Pack 5" for CR-XI (R2) and BOE-XI (R2)
========
There are two different "Service Pack 5" files available for download...
CRYSTAL REPORTS XI (R2) = crxir2win_sp5.exe
BUSINESS OBJECTS ENTERPRISE XI (R2) = boxir2win_sp5.exe
If we have workstations that have both CRYSTAL REPORTS XI and the BUSINESS OBJECTS ENTERPRISE "Client Tools" installed locally on them do I need to run both versions of the "Service Pack 5" - or will running just one (1) of them update all the installed desktop tools...?
Thanks in advance!

I think the CR patch has client issues only.
The enterrpsie one is sufficient in most cases. Is that CR XIR1 or CR XIR2 client you have installed? Make sure it's CR XIR2 or you could run into issues
Regards,
Tim

Crystal Reports for Eclipse 2.0 - Service Pack 1 - is Now Available!

Service Pack 1 for Crystal Reports for Eclipse 2.0 is now available!
Readme file listing the fixes is here:
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4ev2_readme.pdf]
Kirby Leong in another post listed the download URLs, which I'll copy here:
CR4E Runtime Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/crjava-runtime_12.2.202.zip]
CR4E Manual Install Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e_2.0.1.zip]
CR4E All-In-One Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e-all-in-one-win_2.0.1.zip]
CR4E Language Packs
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls1_2.0.1.zip]
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls2_2.0.1.zip]
If you wish to use the Eclipse IDE Software Updater:
1. Start Eclipse 3.4.1 (Gemini) IDE.
2. Select Help -> Software Updates...
3. Select the "Available Software" tab.
4. Click the "Manage Sites..." button.
5. If you do not see the following URL listed:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/
    then click "Add..." and add it.
6. Select the above URL in the "Available Software Sites", then click "OK".
7. The Available Software should now list the above URL. Open the node, and you should see "Crystal Reports for Eclipse".
8. Check all checkboxes for "Crystal Reports for Eclipse", and "Install..."
After successful update, you'll see version 2.0.1 listed in Help -> About Eclipse SDK and clicking on the "Crystal Reports for Eclipse" icon (blue swoosh with green diamond).
If you don't see that version listed, here's some troubleshooting tips:
Open a web browser, and Go to the following URL:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/site.xml
You should get back a XML file listed the current CR4E plugin and language packs versions. If you get an error instead, it may be because (1) you're in a locked down environment that won't let you access that site, or (2) the CR4E Update Site may be down for maintenance.   If the former, you'll have to download the updates by some other means and upgrade manually.

hello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
try {
     String reportName = "report.rpt";
     ReportClientDocument clientDoc = new ReportClientDocument();
     clientDoc.open(reportName, 0);
     String tableAlias = "Command";
     clientDoc.getDatabaseController().setDataSource(
               myResult("SELECT * FROM table"),
               tableAlias,"resultsetTable");
     CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
     crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
     crystalReportPageViewer.processHttpRequest(
               request,
               response,
               application,
               null);
} catch (ReportSDKExceptionBase e) {
     e.printStackTrace();
    out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: 無法預期的資料庫連線器錯誤---- Error code:-2147467259 Error code name:failed
Please help me and tell me why....

I cant access itunes storesMicrosoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002) Hewlett-Packard Compaq Presario CQ61 Notebook PC iTunes 10.6.0.40 QuickTime not available FairPlay 1.14.34 Apple Application Support 2.1.7 iPod Updater Libra

i cant access to itunes store
here is dignostic report
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Hewlett-Packard Compaq Presario CQ61 Notebook PC
iTunes 10.6.0.40
QuickTime not available
FairPlay 1.14.34
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0025AE8C032360A0
Current user is not an administrator.
The current local date and time is 2012-03-27 13:06:24.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.0.40 is currently running.
iTunesHelper 10.6.0.40 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {23DDA231-A7E0-409A-AB19-CEDE8ACE6359}
Description:          speedinfo
IP Address:          182.237.181.108
Subnet Mask:          255.255.255.255
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          202.177.240.125
                    202.177.240.251
Adapter Name:          {948D9871-ADAF-4632-8D0C-538770929B52}
Description:          Atheros AR5007 802.11b/g WiFi Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:
Adapter Name:          {4D499748-069C-4E58-A116-DF748DA3912C}
Description:          Realtek RTL8102E/8103E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address:          192.168.0.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          192.168.0.2
                    192.168.0.4
Active Connection:          speedinfo
Connected:          Yes
Online:                    Yes
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.

i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Hi.
This is definitely not supported, and I don't know that any work is scheduled in the future
to support this JDK on WLS 5.1.
Having said that, I was able to start WLS 5.1sp12 with JDK 1.4 with no errors. I didn't
exercise any features, however.
Regards,
Michael
Rakesh Gupta wrote:
Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment--
Michael Young
Developer Relations Engineer
BEA Support

Upgrade SQL server 2008 r2 to latest available Service Pack in SP 2010 farm.

Hi,
We have 2 server's in the farm ( WFE+App server and SQL server).
We are planning to upgrade SQL server 2008 r2 to latest available Service pack [10.50.6000 (SP3)] version.
So before upgrading SQL server , need to take any necessary actions from SharePoint server side ?
And once patching is done on SQL server, need to run SharePoint Configuration wizard ?
Please provide best way for this upgrade.
Cheers,
RameshNK

You certainly can turn off SharePoint/stop IIS if you wish, but it isn't required. SharePoint will be unavailable during a portion of the SP3 upgrade and will reconnect once SQL is back online.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

After refomatting HDD, reinstalling Vista plus service packs, recovering files from Microsoft backup and installing new copy of Firefox 3.6, Firefox will not run. Have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.

After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.

Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support

Xcelsius Enterprise 2008 Service Pack 2 is now available

Hello,
Xcelsius Enterprise 2008 Service Pack 2 is now available and posted on the SAP BusinessObjects download support site. You can access it here: SAP Crystal Solutions Downloads
It applies to Xcelsius Engage, Engage Server and Enterprise. Not Xcelsius Present.
There will be another announcement for Xcelsius Present 2008 Service Pack 2 when it is released...
Please make sure you download the zip file and extract it to your hard drive before attempting to install.
The Service Pack is a full install so you do not need to have a previous version of Xcelsius 2008 installed.
When you are upgrading a previous Xcelsius 2008 installation you need access to your original Xcelsius 2008 SP1 installation files from the original location otherwise you will be prompted to locate Xcelsius.msi from the original Xcelsius 2008 SP1 installation (in the SP1 installation packages folder).
After installing in Xcelsius Help > About your Xcelsius version number should be 5.2.0.0. (Build 12,2,0,608)
The documentation is available online here: http://help.sap.com/content/bobj/bobj/index.htm and includes:
u2022         What's Fixed in Xcelsius 2008 Service Pack 2
u2022         What's New in Xcelsius 2008 Service Pack 2
u2022         Xcelsius 2008 Installation Guide
u2022         Xcelsius 2008 SP2 Release Notes
u2022         Xcelsius 2008 SP2 User Guide
u2022         Xcelsius 2008 SP2 Supported Platforms is available online here: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0ebdbe6-108f-2c10-9daf-a8b5e051100c&overridelayout=true
Regards
Matt
Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement
Happy posting!
The SAP Xcelsius Community Team

Nice to hear.
Maybe my performance problems with the Buble chart are solved.
SAP help desk promised.

IPS 7.0(8)E4 service pack now available!

The 7.0(8)E4 service pack has been posted and is now available for download here:
http://www.cisco.com/cisco/software/release.html?mdfid=282671829&flowid=4417&softwareid=282549759&release=7.0(8)E4&relind=AVAILABLE&rellifecycle=&reltype=latest

The difference between 7.0(5) and 7.0(5a) is just which Signature Update is included.
7.0(5) included S558
7.0(5a) included S549
The reason for including a lower signature update in 7.0(5a) is because of an issue that happened in the S550 Signature Update.
There was a change to default signatures which could cause issues in configuration.
The Signature Update installations could handle the problem and allow users to correct the issue.
The Service Pack installation, however, is not able to detect the problem and could lead to a larger problem.
So in order to prevent a Service Pack from encountering the issue we re-issued the 7.0(5) Service Pack as a 7.0(5a) Service Pack and put in a Signature level prior to the one that could cause the situation.
Both 7.0(5) and 7.0(5a) have all of the same other files on the sensor.
And if you upgrade 7.0(5) and 7.0(5a) to S567 or higher, then both versions are fully equivalent.
The only difference between the 2 was in the Sig level, and so by applying S567 they are now at the same Sig Level.
The issue with the Signature Update will only affect a few rare customers.
There is a specific signature that if tuned could cause a configuration issue. (You can look in the Readme to see which signature it was, I can't remember right now).
If you did NOT configure this signature, then both 7.0(5) and 7.0(5a) work just fine.
If you've loaded 7.0(5) and it is working, then you don't have to worry about needing to install 7.0(5a), you won't have the issue.
If you have not installed 70(5), then go ahead and use 7.0(5a) so you won't hit the issue.

DIAdem 11 Service Pack 1 (SP1)

Dear DIAdem User,
You can now download Service Pack 1 for DIAdem 11.0 free of charge from the NI Website. Refer to the individual Websites for more information about changes and about errors that have been eliminated.
Your DIAdem Team
National Instruments
Sehr geehrter DIAdem Anwender,
auf dem NI-Web steht für Sie, ab sofort, das Service Pack 1 zu DIAdem 11.0 als kostenfreier Download zur Verfügung. Weitere Informationen zu Änderungen und beseitigten Fehlern finden Sie auf den jeweiligen Web-Seiten.
Ihr DIAdem Team
National Instruments
Web-Links:
DIAdem 11.0 (SP1) English
DIAdem 11.0 (SP1) English DAC
DIAdem 11.0 (SP1) German
DIAdem 11.0 (SP1) Japanese

Hi Iakov,
If you click the link above (http://www.adobe.com/cfusion/entitlement/index.cfm?e=lces2_sp) and click 'Agree' you will get to this page:
You can download the LS Designer ES2 SP1 from there as a single component. Because, like us you are standalone LC Designer ES2 (from Acrobat Pro Ext) without Workbench, you can just update the LC Designer ES2 component.
We have sucessfully installed the update.
Good luck,
Niall

DIAdem 11.1 Service Pack 1 is available

Similar Messages

Maybe you are looking for