Diadem 2012 Freezes on Initialization Screen on Windows 7 mahcine

I have recently had a problem starting Diadem 2012 on a Windows 7 64-bit machine. The program had been running without any problems for over a year. With no other system changes Diadem 2012 freezes during the initial start/initialization window. I have tried restarting several times and have also attempted to uninstall and reinstall Diadem 2012. None of these strategies have correctd the problem. I was curious if anyone else has had any problems similar to this and if they found a solution to correct the problem. Any help of be of great assistance.
Thank you in advance.
Solved!
Go to Solution.

Hi Amanda -
We were able to completely uninstall and then reinstall Diadem 2012 successfully. However, after reinstalling we were still freezing on the start-up/initialization screen. Diadem never fully loads, the Windows process just goes to 0. We attempted to close all applications and try to start Diadem, in case it was a RAM issue. However, this did not solve the problem either.
We previously have not had any issues with this and currently it is only happening on one machine. Is it possible that Diadem is freezing because it is trying to index a folder structure or something? I trided to turn of the data indexer, but that didn't seem to help. Any thoughts?
Thanks,
Mike

Similar Messages

  • Brand new OS X Mountain Lion starts in grey screen login window doesn't know me verify passwords all jacked up says to get external hard drive recovery so I have to spend more moneyon my brand new computer or can I fix and safe boot

    brand new OS X Mountain Lion  Bought in November 2012 starts in grey screen login window doesn't know me, went to utility dIsk ,verify passwords all jacked up, I Engaged repair passwords then press verified Macintosh HD it said Macintosh HD is OK but repair disk button was still lit up and wanted me to make a recovery disk external hard drive and such,please tell me I can fix in safe boot..

    The repair button is always clickable when you are on your Recovery partition, it's nothing to worry about.  Do this instead.
    Then start in single user mode (Command-S)
    Type fsck -fy to check your disk first (it wont let you start working on a disk until you have checked it)
    Then type mount -uw / (dont forget the slash) to mount your Macintosh HDD
    Then type passwd username with username being the username of your admin account
    It will make you type the new password twice afterwards. From then you can boot into OSX as normal and use that account to fix the rest of your passwords.

  • Restore Lock Screen in Windows 8.1

    I deleted the lock screen in Windows 8.1 and now realize I need it.  How can I get it back?  
    I deleted using Windows+R  "regedit"  using this link 
    http://media.askvg.com/downloads/2012/11/Disable-Windows-8-Lock-Screen.zip
    Is there a way to get the lock screen back?

    Hi,
    The registry you posted here are this
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Personalization]
    "NoLockScreen"=dword:00000001
    so you just need to launch regedit editor by run regedit.exe, then locate to the right place, set the value back to 0, then restart your PC.
    or just run the "restore....reg" as David mentioned.
    Yolanda Zhu
    TechNet Community Support

  • IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    If nothing else works, you might try this one. It has worked for many others ...
    Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414
    Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
    iPad 2 and iOS 8.0.2 Problems
    For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
    Here's one person's solution which will help a lot of iPad 2 users!
    keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
    Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
    SOLVED:  IOS 8 Issues on iPad 2:
    I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
    Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
    THE FIX:  FIRST, be sure you have a current iCloud backup of your device.  Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
    To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now!  :-)
    Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

  • My Macbook Pro (Mid 2012) freezes or is slow to login

    Hi, so this issue has occured for a while, but my Macbook Pro 13-inch Mid-2012 freezes occasionally on my login screen. A couple of things happen when it does this.
    Either it freezes and there is no blinking cursor in the password box and I can't move the trackpad/if I do move the trackpad it just turns into a spinning beach ball for 20 seconds and then it finally allows me to log in. When I log in, for a few minutes everything on my computer is sluggish, for example going to my launchpad takes time and opening up applications takes time.
    Or, it will do all of what I just stated above but it is preceded by a sound as if it were booting up from shut down (that mechanical disk sound that always happens right when you press the power button to boot up the computer) and then following this, the screen is brightened a lot and there is a white loading bar at the bottom of the screen towards the middle. The loading bar is like 15 or so transluscent white horizontal lines that become solid white to indicate loading. This may take a few seconds and then it does exactly what I stated in the previous paragraph.
    This issue has happened for a while, and I'm not sure what the problem is. Please help! It's frustrationg to have to take 30 or more seconds to wake up my computer and begin using it.
    I am running OS X Mountain Lion 10.8.3 on a Macbook Pro 13-inch (Mid 2012) with 4 GB of RAM and 2.5 GHz Intel Core i5 processor.

    When I log in, for a few minutes everything on my computer is sluggish, for example going to my launchpad takes time and opening up applications takes time.
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac
    It's frustrationg to have to take 30 or more seconds to wake up my computer and begin using it.
    Check your System Preferences>Accounts>Login Items.  Get rid of and/or delete all that you do not need or want.
    ==================
    If you found no solutions to your problem(s) listed in the various Knowledge Base Articles see if the following suggestions are of any help:
    Except for the keyboard & mouse, disconnect all devices/peripherals from your computer.
    Step 1:  Restart into Safe Mode by holding down the Shift key during startup.  The comp will run a complete & lengthy file system check, then start up w/only the required kernel extensions & w/o running any Startup items that you installed.
    If you are running OS 10.4 it will also perform some font finagling.
    Try starting up normally again.  If you are still stalling, restart in Safe Mode & move on to Step 2...........
    Mac OS X: Starting up in Safe Mode
    Step 2:  Open Library>Startup items folder-the *root* level Library, not the one in your user name folder.
    Look for potentially problematic 3rd party items such as virus scanning software components, etc.  Remove 1 or more items to a location outside the Library folder, such as the Desktop, then restart normally & see if your Mac stalls.  It it does, try removing all the items in the Startup items folder & restart.  If all’s now well, place the items back into the Startup items folder 1 by 1, restarting each time you put one back.  If and/or when the stall resurfaces, you just identified the faulty component.
    If the above does not work, then it’s time to move on to Step 3.................
    Step 3:  WARNING-This step can be tedious-removing .plist files from the /Library/Preferences folder.
    Remove the entire Preferences folder from the Library folder on your startup drive then place the files back 1 by 1 until you see the problem return. *The Mac will automatically create a new Preferences folder in the Library folder*
    Alternatively, you can take half of the items out (all non-Apple .plist file, for example), restart to see if your Mac stalls, then move to a smaller set of  items, repeating the process until the culprit is found.
    Or you can use Preferential Treatment which is a *FREE* utility that does all the work for you.
    Hang in there & good luck!!!!

  • InDesign CC 2014 freezes on "What's New" window

    Dear All,
    InDesign CC 2014 is freezing up everything when it hangs on the "What's New" window which is completely a blank white.  I can't close the application or force quit or do anything else…I have to shut down the computer in order to quit the application or do anything else on the computer -- it is completely frozen.  When the computer restarts, InDesign CC 2014 automatically tries to start up again and freezes the computer unless I get to it before it launches and force quit before it gets a chance to freeze again. 
    InDesign CC is working normally, but I notice that when CC 2014 launches, it also launches InDesign CC with it and both seem to run at the same time.  This does not happen when I start from InDesign CC -- only that application is then active.
    "I'm also getting an Adobe warning that has begun to appear stating:  "Administrator rights are required to complete Adobe add-ons installation or removal" and I'm not sure which application this is referring to or how to log in for these "rights", 
    Anyone else having these issues?  I'm working on a Mac pro.
    Small Town Gal

    Sorry for not being clear. I did the fix in CC2014 and worked great.
    El 06/30/2014, a las 8:40, Small Town Gal <[email protected]> escribió:
    InDesign CC 2014 freezes on "What's New" window
    created by Small Town Gal in InDesign - View the full discussion
    Dear Alberto,
    I'm not sure what vernon you're now running?  Did the above fix work on the new InDesign 2014? or are you saying that InDesign CC is now working?  The suggested "fix" says to open the InDesign CC folder, so I'm wondering if deleting the "What's New" folder from InDesign CC actually also removes it from InDesign 2014?  and is a temporary fix for InDesign 2014, allowing it to finally launch?  Thanks.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6509465#6509465
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in InDesign by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Screen Sharing via iCloud on Lion Freezes at Login Screen

    After updating to OSX Lion 10.7.3, screen sharing between two computers via the Internet allows me to connect to the remote computer and see the remote user's login screen, but as soon as I click on a user to login, the screen share image freezes before I can enter the user password. 
    Using iCloud Back to My Mac because all machines have the same Apple ID & password. Exact same setup worked before the 10.7.3 upgrade, but it could be coincidence. 
    Details:
    Can see the remote computers in my finder,
    Can click on them and connect successfully using either the Apple ID or the name and password a user that is allowed under Sharing -> Screen Sharing,
    When clicking on "Screen Share," the computers connect and I'm prompted to either "Ask to Share the Display" or "Connect to Virtual Display"Since there really isn't anyone using the computer, I select "Connect to Virtual Display"
    After clicking "Connect to Virtual Display" the Screen Sharing window shows the remote computer's login screen, whcih shows the user names, their icons and "Sleep" "Restart" or "Shut Down" on the bottom of the screen.  One user has an orange circle with a white checkmark next to it. 
    Previously, I could click a user's name or icon, enter the password and control the remote Mac.  Now, not amount of clicking works. 
    Have tried disconnecting and reconnecting as different users or using Apple ID without changes in the perofmance. Have restarted both machines. 
    Any help?

    I'm having the same problem screen sharing to a Lion 10.7.3 machine, I get this message.
    However, it works just like it used to when I screen share from a 10.7.3 machine to another Mac running 10.6.8.
    Any thoughts?
    Thanks!

  • I can not install Waik and mdt on server 2012 so that i can deploy windows 7 please may you help me?

    i can not install  Waik  and mdt on server 2012 so that i can deploy windows 7 on target machine, i have downloaded mdt  Waik i got error saying you must install frame 2.0  which needs also adk windows 8. i am using hyper  machine.
    thank you

    Hi Warsame12,
    It is worth mentioning that don’t use IPV6 PXE, Windows 7 doesn’t support WDS 2012 deployment over IPv6 PXE. If IPv6 PXE boot is enabled and a 
    Windows 7 installation is selected, a blank screen will appear and Setup will not run.
    The related KB:
    Windows 7 client deployment over IPv6 PXE network boot does not work.
    http://support.microsoft.com/kb/2803741
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • All vm's in hyper-v 2012 core cannot initialize

    Hi,
    All vm's in hyper-v 2012 core cannot initialize.
    there is ram and space in drive. Tried to run windows update and restarted hyper-V.
    any suggestions?
    Thanks

    So on your other host, 10.21.0.150 (?), right-click on the folder 'virtualmachines' and select 'Properties'. Go to the 'Sharing' tab and enable sharing. You will need to specify the domain admin, in your case, to have full permissions to the share.
    Note that I wouldn't really recommend your approach from a permissions point of view - rather, I'd create a separate account within AD for this, grant that user full permissions to the folder, and then provide these credentials from your Hyper-V host.
    I'm not sure which OS you're using for hosting your 'virtualmachines' folder, but http://technet.microsoft.com/en-us/library/cc770406.aspx should provide additional information
    for actually configuring your shares.
    Further, I'd use a little more descriptive name than just 'New Virtual Machine' in order to help keep things more organized as your environment grows.

  • My Computer freezes and the screen turns white. What would cause this?

    My mac miniComputer freezes and the screen turns white. What would cause this?

    Here is what was in the utilities for my console.
    10/22/13 9:41:59.000 AM kernel[0]: CoreStorage: fsck_cs has finished for group "3FD474FF-B711-4557-9B01-67EB19C49BDA" with status 0x00
    10/22/13 9:41:59.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD HTS541010A9E662 Media/IOGUIDPartitionScheme/Macintosh HD@2/CoreStoragePhysical/CoreStorageGroup/Macintosh HD
    10/22/13 9:41:59.000 AM kernel[0]: BSD root: disk1, major 1, minor 4
    10/22/13 9:41:59.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 65415680 to: 68414464 (joffset 0x13218000)
    10/22/13 9:41:59.000 AM kernel[0]: IOThunderboltSwitch<0xffffff80159d4a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    10/22/13 9:41:59.000 AM kernel[0]: IOThunderboltSwitch<0xffffff80159d4a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    10/22/13 9:41:59.000 AM kernel[0]: USBMSC Identifier (non-unique): 10000E000C7F9033 0x59f 0x621 0x0, 2
    10/22/13 9:41:59.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
    10/22/13 9:41:59.000 AM kernel[0]: Kernel is LP64
    10/22/13 9:41:59.000 AM kernel[0]: hfs: Removed 6 orphaned / unlinked files and 475 directories
    10/22/13 9:41:59.000 AM kernel[0]: BCM5701Enet: Ethernet address a8:20:66:0d:fc:25
    10/22/13 9:41:59.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:97:55:7f
    10/22/13 9:41:59.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    10/22/13 9:41:59.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    10/22/13 9:42:06.456 AM com.apple.kextd[12]: not watching F3408C38-5457-3475-AD1D-D360F815C3AD -> no volume lock to grant
    10/22/13 9:42:06.547 AM fseventsd[59]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (86493 21 86554)
    10/22/13 9:42:06.584 AM hidd[58]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    10/22/13 9:42:06.586 AM hidd[58]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    10/22/13 9:42:06.590 AM kdc[56]: label: default
    10/22/13 9:42:06.590 AM kdc[56]:     dbname: od:/Local/Default
    10/22/13 9:42:06.590 AM kdc[56]:     mkey_file: /var/db/krb5kdc/m-key
    10/22/13 9:42:06.590 AM kdc[56]:     acl_file: /var/db/krb5kdc/kadmind.acl
    10/22/13 9:42:06.598 AM airportd[74]: _processDLILEvent: en1 attached (down)
    10/22/13 9:42:06.640 AM coreservicesd[76]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    10/22/13 9:42:06.682 AM mDNSResponder[50]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
    10/22/13 9:42:06.000 AM kernel[0]: Previous Shutdown Cause: 3
    10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
    10/22/13 9:42:06.000 AM kernel[0]: IOBluetoothUSBDFU::probe
    10/22/13 9:42:06.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828A FirmwareVersion - 0x0066
    10/22/13 9:42:06.000 AM kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- this = 0xffffff80168d6c00 ****
    10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- controller = 0xffffff80168d6c00
    10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    10/22/13 9:42:06.000 AM kernel[0]: DSMOS has arrived
    10/22/13 9:42:06.000 AM kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
    10/22/13 9:42:06.000 AM kernel[0]: createVirtIf(): ifRole = 1
    10/22/13 9:42:06.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
    10/22/13 9:42:06.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff801682f000
    10/22/13 9:42:06.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    10/22/13 9:42:06.000 AM kernel[0]: Created virtif 0xffffff801682f000 p2p0
    10/22/13 9:42:06.000 AM kernel[0]: m_tail has not been written to hardware: m_tail = 0x00000000, hardare tail register = 0x00001d08
    10/22/13 9:42:07.714 AM configd[18]: setting hostname to "kathy-winters-mac-mini-3.local"
    10/22/13 9:42:07.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    10/22/13 9:42:07.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    10/22/13 9:42:07.717 AM configd[18]: network changed.
    10/22/13 9:42:08.210 AM fseventsd[59]: log dir: /.fseventsd getting new uuid: 5C426A11-1379-4AD6-AFD9-DF4963B9C3CB
    10/22/13 9:42:08.000 AM kernel[0]: macx_swapon SUCCESS
    10/22/13 9:42:09.264 AM mds[49]: (Normal) FMW: FMW 0 0
    10/22/13 9:42:09.446 AM com.apple.SecurityServer[15]: Session 100000 created
    10/22/13 9:42:10.000 AM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 10-Megabit, Half-duplex, No flow-control, Debug [796d,0101,0de1,0300,0021,0000]
    10/22/13 9:42:14.849 AM appleeventsd[64]: main: Starting up
    10/22/13 9:42:16.255 AM com.apple.usbmuxd[39]: usbmuxd-323 on Jul 29 2013 at 23:21:29, running 64 bit
    10/22/13 9:42:19.119 AM com.apple.SecurityServer[15]: Entering service
    10/22/13 9:42:19.177 AM systemkeychain[79]: done file: /var/run/systemkeychaincheck.done
    10/22/13 9:42:19.185 AM configd[18]: network changed: DNS*
    10/22/13 9:42:19.187 AM mDNSResponder[50]: D2D_IPC: Loaded
    10/22/13 9:42:19.187 AM mDNSResponder[50]: D2DInitialize succeeded
    10/22/13 9:42:19.223 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 5 seconds
    10/22/13 9:42:19.621 AM netbiosd[83]: Unable to start NetBIOS name service:
    10/22/13 9:42:20.363 AM kdc[56]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    10/22/13 9:42:20.629 AM apsd[70]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    10/22/13 9:42:20.629 AM apsd[70]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    10/22/13 9:42:20.993 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    10/22/13 9:42:21.081 AM digest-service[105]: label: default
    10/22/13 9:42:21.081 AM digest-service[105]:     dbname: od:/Local/Default
    10/22/13 9:42:21.081 AM digest-service[105]:     mkey_file: /var/db/krb5kdc/m-key
    10/22/13 9:42:21.081 AM digest-service[105]:     acl_file: /var/db/krb5kdc/kadmind.acl
    10/22/13 9:42:21.083 AM digest-service[105]: digest-request: uid=0
    10/22/13 9:42:21.104 AM corestoraged[99]: 0x7fff720a4180 unlockLVF: LVF=E089D621-8D4E-44B9-82E5-DBFC72F26660, "AES-XTS", status = "Unlocked"
    10/22/13 9:42:21.106 AM rpcsvchost[109]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    10/22/13 9:42:21.109 AM digest-service[105]: digest-request: init request
    10/22/13 9:42:21.113 AM digest-service[105]: digest-request: init return domain: BUILTIN server: KATHY-WINTERS-MAC-MINI-3
    10/22/13 9:42:21.301 AM coreservicesd[76]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    10/22/13 9:42:21.305 AM com.apple.kextcache[113]: /: helper partitions appear up to date.
    10/22/13 9:42:21.801 AM awacsd[68]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
    10/22/13 9:42:21.804 AM awacsd[68]: InnerStore CopyAllZones: no info in Dynamic Store
    10/22/13 9:42:22.008 AM locationd[54]: NOTICE,Location icon should now be in state 0
    10/22/13 9:42:22.000 AM kernel[0]: en1: 802.11d country code set to 'US'.
    10/22/13 9:42:22.000 AM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    10/22/13 9:42:22.000 AM kernel[0]: MacAuthEvent en1   Auth result for: d8:c7:c8:5b:d5:d0  MAC AUTH succeeded
    10/22/13 9:42:22.000 AM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    10/22/13 9:42:22.000 AM kernel[0]: AirPort: Link Up on en1
    10/22/13 9:42:22.000 AM kernel[0]: en1: BSSID changed to d8:c7:c8:5b:d5:d0
    10/22/13 9:42:22.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    10/22/13 9:42:22.195 AM loginwindow[53]: Login Window Application Started
    10/22/13 9:42:22.244 AM WindowServer[114]: Server is starting up
    10/22/13 9:42:22.247 AM WindowServer[114]: Session 256 retained (2 references)
    10/22/13 9:42:22.247 AM WindowServer[114]: Session 256 released (1 references)
    10/22/13 9:42:22.254 AM WindowServer[114]: Session 256 retained (2 references)
    10/22/13 9:42:22.705 AM WindowServer[114]: init_page_flip: page flip mode is on
    10/22/13 9:42:23.271 AM kdc[56]: KDC started
    10/22/13 9:42:23.578 AM configd[18]: network changed: v4(en1+:173.250.178.195) DNS+ Proxy+ SMB
    10/22/13 9:42:23.581 AM WindowServer[114]: mux_initialize: Couldn't find any matches
    10/22/13 9:42:23.586 AM configd[18]: setting hostname to "d-173-250-178-195.dhcp4.washington.edu"
    10/22/13 9:42:23.589 AM UserEventAgent[11]: CFPreferences: user home directory for user mobile at  is unavailable. User domains will be volatile.
    10/22/13 9:42:23.590 AM UserEventAgent[11]: Captive: en1: Probing 'University of Washington'
    10/22/13 9:42:23.599 AM WindowServer[114]: GLCompositor enabled for tile size [256 x 256]
    10/22/13 9:42:23.599 AM WindowServer[114]: CGXGLInitMipMap: mip map mode is on
    10/22/13 9:42:23.607 AM UserEventAgent[11]: Captive: Online (not captive)
    10/22/13 9:42:23.609 AM configd[18]: network changed: v4(en1!:173.250.178.195) DNS Proxy SMB
    10/22/13 9:42:23.632 AM WindowServer[114]: WSMachineUsesNewStyleMirroring: true
    10/22/13 9:42:23.632 AM WindowServer[114]: MPServiceForDisplayDevice: Invalid device alias (0)
    10/22/13 9:42:23.632 AM WindowServer[114]: Display 0x1c80d8d2: GL mask 0x4; bounds (0, 0)[1920 x 1080], 17 modes available
    Main, Active, on-line, enabled, boot, Vendor 472, Model 235, S/N 23505592, Unit 2, Rotation 0
    UUID 0x00000472000002352350559200000000
    10/22/13 9:42:23.633 AM WindowServer[114]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003c
    10/22/13 9:42:23.633 AM WindowServer[114]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x5 for display 0x1c80d8d2
    10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x6 for display 0x003f003c
    10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x7 for display 0x003f003d
    10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x1c80d8d2: GL mask 0x4; bounds (0, 0)[1920 x 1080], 17 modes available
    Main, Active, on-line, enabled, boot, Vendor 472, Model 235, S/N 23505592, Unit 2, Rotation 0
    UUID 0x00000472000002352350559200000000
    10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x003f003c: GL mask 0x1; bounds (2944, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003c
    10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    10/22/13 9:42:23.638 AM WindowServer[114]: CGXPerformInitialDisplayConfiguration
    10/22/13 9:42:23.639 AM WindowServer[114]:   Display 0x1c80d8d2: MappedDisplay Unit 2; Vendor 0x472 Model 0x235 S/N 592467346 Dimensions 20.51 x 11.54; online enabled, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
    10/22/13 9:42:23.639 AM WindowServer[114]:   Display 0x003f003c: MappedDisplay Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
    10/22/13 9:42:23.639 AM WindowServer[114]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
    10/22/13 9:42:24.078 AM ntpd[100]: proto: precision = 1.000 usec
    10/22/13 9:42:24.338 AM WindowServer[114]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x00004193, unit 0, caps QEX|QGL|MIPMAP, vram 1156 MB
    10/22/13 9:42:24.338 AM WindowServer[114]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    10/22/13 9:42:24.342 AM loginwindow[53]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    10/22/13 9:42:24.628 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 10 seconds
    10/22/13 9:42:24.873 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
    10/22/13 9:42:24.882 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
    10/22/13 9:42:25.125 AM com.apple.launchd[1]: (com.apple.xprotectupdater[36]) Exited with code: 252
    10/22/13 9:42:25.410 AM WindowServer[114]: Created shield window 0x8 for display 0x1c80d8d2
    10/22/13 9:42:25.410 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
    10/22/13 9:42:25.427 AM launchctl[126]: com.apple.findmymacmessenger: Already loaded
    10/22/13 9:42:25.441 AM com.apple.SecurityServer[15]: Session 100004 created
    10/22/13 9:42:25.472 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
    10/22/13 9:42:25.542 AM configd[18]: network changed: v4(en0+:128.95.5.135, en1) DNS! Proxy! SMB
    10/22/13 9:42:25.548 AM configd[18]: setting hostname to "d-128-95-5-135.dhcp4.washington.edu"
    10/22/13 9:42:25.567 AM locationd[134]: NOTICE,Location icon should now be in state 0
    10/22/13 9:42:25.573 AM UserEventAgent[127]: cannot find useragent 1102
    10/22/13 9:42:25.600 AM loginwindow[53]: Login Window Started Security Agent
    10/22/13 9:42:25.667 AM SecurityAgent[136]: This is the first run
    10/22/13 9:42:25.667 AM SecurityAgent[136]: MacBuddy was run = 0
    10/22/13 9:42:25.676 AM WindowServer[114]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x1c80d8d2 device: 0x103f34110  isBackBuffered: 1 numComp: 3 numDisp: 3
    10/22/13 9:42:25.869 AM SecurityAgent[136]: User info context values set for kathywinter
    10/22/13 9:42:25.990 AM WindowServer[114]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    10/22/13 9:42:26.013 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
    10/22/13 9:42:26.026 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
    10/22/13 9:42:26.295 AM loginwindow[53]: Login Window - Returned from Security Agent
    10/22/13 9:42:26.298 AM loginwindow[53]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    10/22/13 9:42:26.308 AM loginwindow[53]: USER_PROCESS: 53 console
    10/22/13 9:42:26.321 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
    10/22/13 9:42:26.755 AM com.apple.launchd.peruser.501[148]: (com.apple.gamed) Ignored this key: UserName
    10/22/13 9:42:26.755 AM com.apple.launchd.peruser.501[148]: (com.apple.gamed) Ignored this key: GroupName
    10/22/13 9:42:26.756 AM com.apple.launchd.peruser.501[148]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    10/22/13 9:42:26.760 AM loginwindow[53]: Connection with distnoted server was invalidated
    10/22/13 9:42:26.765 AM distnoted[154]: # distnote server agent  absolute time: 42.067362814   civil time: Tue Oct 22 09:42:26 2013   pid: 154 uid: 501  root: no
    10/22/13 9:42:27.409 AM UserEventAgent[153]: cannot find fw daemon port 1102
    10/22/13 9:42:27.844 AM com.apple.SecurityServer[15]: Session 100005 created
    10/22/13 9:42:28.028 AM WindowServer[114]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    10/22/13 9:42:28.048 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
    10/22/13 9:42:28.168 AM mds[49]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    10/22/13 9:42:28.169 AM mds[49]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    10/22/13 9:42:31.327 AM timezoned[183]: bootstrap_look_up failed (44e)
    10/22/13 9:42:31.336 AM timezoned[183]: bootstrap_look_up failed (44e)
    10/22/13 9:42:34.612 AM mds[49]: Unable to talk to lsboxd
    10/22/13 9:42:34.674 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 20 seconds
    10/22/13 9:42:34.768 AM com.apple.time[153]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    10/22/13 9:42:37.163 AM awacsd[68]: Exiting
    10/22/13 9:42:38.863 AM com.apple.launchd.peruser.501[148]: (com.apple.AddressBook.abd) Throttling respawn: Will start in 9 seconds
    10/22/13 9:42:42.685 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.685 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.714 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.714 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.733 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.733 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.752 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.752 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.771 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.771 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.789 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.789 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.808 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.808 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.827 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.827 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.845 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.845 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.864 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.864 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:43.000 AM kernel[0]: Sophos Anti-Virus on-access kext activated
    10/22/13 9:42:46.750 AM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[131]) Exit timeout elapsed (20 seconds). Killing
    10/22/13 9:42:49.603 AM SystemUIServer[175]: CGSCopyWindowShape: pid (175) passed NULL window
    10/22/13 9:42:49.603 AM SystemUIServer[175]: could not update menu bar region, 1000
    10/22/13 9:42:49.603 AM SystemUIServer[175]: CGSSetWindowTransformAtPlacement: Singular matrix [0.000 0.000 0.000 0.000]
    10/22/13 9:42:49.817 AM coreaudiod[197]: Enabled automatic stack shots because audio IO is inactive
    10/22/13 9:42:53.000 AM kernel[0]: jnl: disk2s6: flushing fs disk buffer returned 0x5
    10/22/13 9:42:54.715 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 40 seconds

  • Berechnen von MD5-Hashwe​rten in DIAdem 2012

    Hallo zusammen,
    ich bin auf der Suche nach einer Möglichkeit, in DIAdem 2012 den MD5-Hashwert
    für eine jeweils gegebene Binärdatei zu berechnen.
    Gibt es hier bereits fertige Lösungen, wie bspw. für LabVIEW?
    Was wäre hier die beste Ansatzweise?
    Vielen Dank für Antworten!!
    Gruß,
    FlKoch

    Hallo nochmals,
    danke für die Antwort.
    Ich habe mir in der Zwischenzeit aus verschiedensten Quellen letztendlich die folgende Lösung 'zurechtgebastelt'.
    Der erzeugte Hash-Wert stimmt dem eines anderen Generators überein.
    Ich nutze hierbei die .NET-Klasse  MD5CryptoServiceProvider, welche ich mit einem ADODB-Stream 'füttere', und konvertiere anschließend das Ergebnis in einen Hex-String.
    Private Function ByteArrayToHexStr(ByVal fByteArray)
    Dim k
    ByteArrayToHexStr = ""
    For k = 1 To Lenb(fByteArray)
    ByteArrayToHexStr = ByteArrayToHexStr & Right("0" & Hex(Ascb(Midb(fByteArray, k, 1))), 2)
    Next
    End Function
    Public Function GenerateMD5ForFile(ByRef fFileName)
    Dim strBin : Set strBin = CreateObject("ADODB.Stream")
    Dim oMD5 : Set oMD5 = CreateObject("System.Security.Cryptography.MD5Cryp​toServiceProvider")
    Dim baHash
    strBin.Type = 1 'adTypeBinary
    strBin.Open()
    oMD5.Initialize()
    strBin.LoadFromFile(fFileName)
    strBin.Position = 0
    baHash = oMD5.ComputeHash_2(strBin.Read()) '2. Überladung von <ComputeHash>
    GenerateMD5ForFile = ByteArrayToHexStr(baHash)
    strBin.Close()
    End Function
     Gruß,
    FlKoch

  • Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart

    Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart. Here is my recent crash report. Please help me.
    Anonymous UUID:  
    714EBD8C-083D-E200-A9BD-6F925A8F8F14
    Thu May 29 22:30:04 2014
    panic(cpu 0 caller 0xffffff80026dbf5e): Kernel trap at 0xffffff80026d1197, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0xffffef8022f973c8, CR3: 0x0000000089778000, CR4: 0x0000000000000660
    RAX: 0x000000000000001c, RBX: 0x00000000e00002c2, RCX: 0xffffff8002abb7d4, RDX: 0xffffef8022f973c0
    RSP: 0xffffff800d2cb6a0, RBP: 0xffffff800d2cb6a0, RSI: 0x0000000000000001, RDI: 0xffffef8022f973c0
    R8:  0x0000000000000001, R9:  0x0000000000000001, R10: 0xffffff8014ea65e8, R11: 0xffffff809b3160f0
    R12: 0xffffef8022f973c0, R13: 0x0000000000000001, R14: 0xffffff800d2cb6ec, R15: 0x0000000000000001
    RFL: 0x0000000000010202, RIP: 0xffffff80026d1197, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffef8022f973c8, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff800d2cb330 : 0xffffff8002622fa9
    0xffffff800d2cb3b0 : 0xffffff80026dbf5e
    0xffffff800d2cb580 : 0xffffff80026f3456
    0xffffff800d2cb5a0 : 0xffffff80026d1197
    0xffffff800d2cb6a0 : 0xffffff80026afd0e
    0xffffff800d2cb6d0 : 0xffffff8002abb751
    0xffffff800d2cb710 : 0xffffff8002abb54f
    0xffffff800d2cb760 : 0xffffff7f8413fd2f
    0xffffff800d2cb7a0 : 0xffffff7f84188b21
    0xffffff800d2cb7e0 : 0xffffff7f841708d2
    0xffffff800d2cb850 : 0xffffff7f84170fc8
    0xffffff800d2cb890 : 0xffffff7f8413dfea
    0xffffff800d2cba10 : 0xffffff7f8416d940
    0xffffff800d2cbad0 : 0xffffff7f8413cad9
    0xffffff800d2cbb20 : 0xffffff8002acea56
    0xffffff800d2cbb40 : 0xffffff8002ad0051
    0xffffff800d2cbba0 : 0xffffff8002acdabf
    0xffffff800d2cbcf0 : 0xffffff80026b66a8
    0xffffff800d2cbe00 : 0xffffff8002626bf1
    0xffffff800d2cbe30 : 0xffffff80026139f5
    0xffffff800d2cbea0 : 0xffffff800261e043
    0xffffff800d2cbf20 : 0xffffff80026c975d
    0xffffff800d2cbfb0 : 0xffffff80026f3a28
    Kernel Extensions in backtrace:
    com.apple.GeForceTesla(8.2.4)[24ED915E-02F3-3A31-8502-6AA41FFCA420]@0xffffff7f84 12b000->0xffffff7f841f5fff
    dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f82cbe000
    dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f8324b000
    dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f83208000
    dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f8325b000
    BSD process name corresponding to current thread: Skype
    Mac OS version:
    13D65
    Kernel version:
    Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
    Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
    Kernel slide:
    0x0000000002400000
    Kernel text base: 0xffffff8002600000
    System model name: MacBookPro5,5 (Mac-F2268AC8)
    System uptime in nanoseconds: 60200033152435
    last loaded kext at 44797399467641: com.apple.filesystems.smbfs
    2.0.2 (addr 0xffffff7f84b15000, size 335872)
    last unloaded kext at 15796237223278: com.apple.macos.driver.AppleUSBEthernetHost
    7.0 (addr 0xffffff7f84b15000, size 20480)
    loaded kexts:
    net.telestream.driver.TelestreamAudio
    1.1.0
    com.rim.driver.BlackBerryUSBDriverInt
    0.0.97
    com.apple.filesystems.smbfs
    2.0.2
    com.apple.filesystems.ntfs
    3.11
    com.apple.driver.AppleHWSensor
    1.9.5d0
    com.apple.driver.AGPM
    100.14.15
    com.apple.filesystems.autofs
    3.0
    com.apple.driver.AppleMikeyHIDDriver
    124
    com.apple.driver.AppleHDA
    2.6.1f2
    com.apple.driver.AppleMikeyDriver
    2.6.1f2
    com.apple.GeForceTesla
    8.2.4
    com.apple.driver.AppleUpstreamUserClient
    3.5.13
    com.apple.driver.AudioAUUC
    1.60
    com.apple.iokit.IOUserEthernet
    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager
    4.2.4f1
    com.apple.Dont_Steal_Mac_OS_X
    7.0.0
    com.apple.driver.AppleHWAccess
    1
    com.apple.driver.AppleBacklight
    170.3.5
    com.apple.driver.AppleMCCSControl
    1.1.12
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
    4.2.4f1
    com.apple.driver.AppleSMCLMU
    2.0.4d1
    com.apple.driver.ACPI_SMC_PlatformPlugin
    1.0.0
    com.apple.driver.AppleLPC
    1.7.0
    com.apple.driver.SMCMotionSensor
    3.0.4d1
    com.apple.driver.AppleUSBTCButtons
    240.2
    com.apple.driver.AppleUSBTCKeyboard
    240.2
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
    1.0.0d1
    com.apple.BootCache
    35
    com.apple.driver.AppleIRController
    325.7
    com.apple.driver.AppleUSBCardReader
    3.4.1
    com.apple.iokit.SCSITaskUserClient
    3.6.6
    com.apple.driver.XsanFilter
    404
    com.apple.iokit.IOAHCIBlockStorage
    2.5.1
    com.apple.driver.AirPort.Brcm4331
    700.20.22
    com.apple.driver.AppleFWOHCI
    5.0.2
    com.apple.driver.AppleUSBHub
    666.4.0
    com.apple.driver.AppleAHCIPort
    3.0.0
    com.apple.nvenet
    2.0.21
    com.apple.driver.AppleUSBOHCI
    656.4.1
    com.apple.driver.AppleUSBEHCI
    660.4.0
    com.apple.driver.AppleSmartBatteryManager
    161.0.0
    com.apple.driver.AppleRTC
    2.0
    com.apple.driver.AppleHPET
    1.8
    com.apple.driver.AppleACPIButtons
    2.0
    com.apple.driver.AppleSMBIOS
    2.1
    com.apple.driver.AppleACPIEC
    2.0
    com.apple.driver.AppleAPIC
    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient
    217.92.1
    com.apple.nke.applicationfirewall
    153
    com.apple.security.quarantine
    3
    com.apple.driver.AppleIntelCPUPowerManagement
    217.92.1
    com.apple.AppleGraphicsDeviceControl
    3.5.26
    com.apple.kext.triggers
    1.0
    com.apple.driver.DspFuncLib
    2.6.1f2
    com.apple.vecLib.kext
    1.0.0
    com.apple.driver.AppleHDAController
    2.6.1f2
    com.apple.iokit.IOHDAFamily
    2.6.1f2
    com.apple.nvidia.classic.NVDANV50HalTesla
    8.2.4
    com.apple.nvidia.classic.NVDAResmanTesla
    8.2.4
    com.apple.iokit.IOAudioFamily
    1.9.7fc2
    com.apple.kext.OSvKernDSPLib
    1.14
    com.apple.iokit.IOSurface
    91.1
    com.apple.iokit.IOSerialFamily
    10.0.7
    com.apple.iokit.IOBluetoothFamily
    4.2.4f1
    com.apple.driver.AppleBacklightExpert
    1.0.4
    com.apple.driver.AppleSMBusController
    1.0.11d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport
    4.2.4f1
    com.apple.iokit.IOFireWireIP
    2.2.6
    com.apple.driver.IOPlatformPluginLegacy
    1.0.0
    com.apple.driver.AppleSMBusPCI
    1.0.12d1
    com.apple.driver.IOPlatformPluginFamily
    5.7.0d11
    com.apple.iokit.IONDRVSupport
    2.4.1
    com.apple.iokit.IOGraphicsFamily
    2.4.1
    com.apple.driver.AppleSMC
    3.1.8
    com.apple.driver.AppleUSBMultitouch
    240.9
    com.apple.iokit.IOUSBHIDDriver
    660.4.0
    com.apple.driver.AppleUSBMergeNub
    650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice
    3.6.6
    com.apple.iokit.IOBDStorageFamily
    1.7
    com.apple.iokit.IODVDStorageFamily
    1.7.1
    com.apple.iokit.IOCDStorageFamily
    1.7.1
    com.apple.iokit.IOAHCISerialATAPI
    2.6.1
    com.apple.iokit.IO80211Family
    630.35
    com.apple.iokit.IOFireWireFamily
    4.5.5
    com.apple.iokit.IOUSBUserClient
    660.4.2
    com.apple.iokit.IOAHCIFamily
    2.6.5
    com.apple.iokit.IONetworkingFamily
    3.2
    com.apple.driver.NVSMU
    2.2.9
    com.apple.driver.AppleEFINVRAM
    2.0
    com.apple.driver.AppleEFIRuntime
    2.0
    com.apple.iokit.IOHIDFamily
    2.0.0
    com.apple.iokit.IOSMBusFamily
    1.1
    com.apple.security.sandbox
    278.11
    com.apple.kext.AppleMatch
    1.0.0d1
    com.apple.security.TMSafetyNet
    7
    com.apple.driver.AppleKeyStore
    2
    com.apple.driver.DiskImages
    371.1
    com.apple.iokit.IOReportFamily
    23
    com.apple.driver.AppleFDEKeyStore
    28.30
    com.apple.iokit.IOUSBMassStorageClass
    3.6.0
    com.apple.driver.AppleUSBComposite
    656.4.1
    com.apple.iokit.IOSCSIBlockCommandsDevice
    3.6.6
    com.apple.iokit.IOStorageFamily
    1.9
    com.apple.iokit.IOSCSIArchitectureModelFamily
    3.6.6
    com.apple.iokit.IOUSBFamily
    677.4.0
    com.apple.driver.AppleACPIPlatform
    2.0
    com.apple.iokit.IOPCIFamily
    2.9
    com.apple.iokit.IOACPIFamily
    1.4
    com.apple.kec.pthread
    1
    com.apple.kec.corecrypto
    1.0
    System Profile:
    Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
    Serial ATA Device: MATSHITADVD-R   UJ-868
    USB Device: Built-in iSight
    USB Device: Internal Memory Card Reader
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: IR Receiver
    USB Device: Wireless Optical Mouse
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus:
    Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
    Serial ATA Device: MATSHITADVD-R   UJ-868
    USB Device: Built-in iSight
    USB Device: Internal Memory Card Reader
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: IR Receiver
    USB Device: Wireless Optical Mouse
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus:

    riyazfrombangalore,
    your 13-inch Mid 2009 MacBook Pro requires 1066 MHz RAM, but you have 1333 MHz RAM installed. Try replacing the 1333 MHz RAM with 1066 MHz RAM — Macs can be picky about the RAM which they find acceptable.

  • Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

    Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

    I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

  • Help MacBook Pro 13" early 2011 suddenly black screen in Windows 7 SP1. EFI 2.2.

    Hi, everyone, I need help here.
    Apple MacBook Pro 13" early 2011 preinstall Lion version, EFI 2.2, Boot Camp 4.0. suddenly black screen in Windows 7 SP1 (black screen and also no sound at all, need to press power button to off). What happen?? Please someone tell me what to do?
    I have delete bootcamp HD and reinstall windows 7 but the problem is still here, I have reset PRAM and SMC too.
    The video on the black screen: (http://www.youtube.com/watch?v=z3dLTFSD-v8)

    Oh I actually have the problem in Mac OS, not even using the Bootcamp or Windows 7
    Csound1 wrote:
    lokiman wrote:
    I am having the exact same problem with my 13" early 2011 Macbook Pro. I have 10.6.8. I used the disk that came with the laptop to restore the OS to 10.6.7 but the problem existed there too. I have now updated it back to 10.6.8. The problem still exists. This doesn't seem to be limited to an OS version and seems like an issue with device driver or with hardware. I will try to take it to the Apple store and see if this gets resolved.
    You too have a black screen in Windows 7. ?

  • When clicking the itunes icon on my left side of screen a window pops up and says i need to disable the compatability, I tried to do this from what it prompted me to do, but it still say problem unresolved

    I have not been able to access the itunes store for the past month, it has been a long time since I have downloaded/purchased anything, probably around christmas time, but the problem is I click on the itunes store and the grey zebra striped bar just keeps running accross the top indefinitely, one other thing is that when I click on my itunes icon on the left side of my screen a window pops up and tells me to turn off compatibility, so I tried to follow the prompts through the properties from right clicking the itunes icon but after the thing runs its check and i click on make suggested changes, it still says incompatible.  I have no idea what to do and this is extremely frustrating, please help!!

    Refer to this artile:
    iTunes for Windows: How to turn off Compatibility Mode
    http://support.apple.com/kb/TS1489
    For Windows 7, make sure all boxes in Compatibility tab are unchecked.

Maybe you are looking for

  • How to set up loopback# as source fro NTP and/or built-in DNS server ?

    I have created a loopback# interface which I would like to be used as the router source interface for the NTP client and/or built-in DNS server so everything originating whithin the router has only one and unique IP address (such as: logging source-i

  • Can't change printer from one account to another

    Hi, I seem to be stuck between the proverbial rock and a hard place. Here's the situation: 1. My old e-mail account used originally to sign in to the HP eprint center has been deleted by the e-mail provider (MSN). It can't be recreated because MSN wi

  • Macbook Pro won't sleep with lid closed problem sorted!

    I have experienced and read about many other people having the problem of not being able to put the macbook to sleep propery, and opening your bag to find it is boiling hot and still awake... i have tried all of the solutions posted on this forum suc

  • Material determination with Product selection

    Hi SAP Gurus We are using material determination with product selection. The process is that customer will send in one product in a sales order. At the time of doing ATP we have to look for about three or four possible alternatives and confirm that a

  • Desktop items moving randomly around

    Whenever I interchange my macbook pro with retina from using an external thunderbolt display or not, sometimes my desktop sticky notes will move randomly around the screen. I have them all nicely placed beside each other up in the top left corner, bu