Diadem Does not save data to neither portal nor file

I tried to acquire data from DAQ USB-6289 and save data to portal or file in DIADem DAC, but failed to get any data in portal, and no file was created, and no error was promptEd. But when I open a example file with saving function, it works fine. I'm sure there isn't any problem about the script since it is a very simple one. Do you have any suggestions?
Thanks a lot.
Jing

Hi Jing -
Since you said you're building your scheme based off of an example, I'm going to assume you've already included a Save Data or Save Data with Trigger block in your DAC scheme. This is mandatory if you want to use Data Storage with either of the two following techniques.
If you're running your DAC scheme programmatically, are you using the SchemeMeasTest() command, or the SchemeMeasStart() command? If you want your DAC scheme to be run with Data Storage (Data Portal or File) enabled, you'll need to use the SchemeMeasStart() command. The other command merely runs the scheme with visualization only (as a test).
If you're running your DAC scheme interactively, are you pressing the Start Display button or the Start Measurement button (see below)? These two buttons are the interactive versions of the aforementioned programmatic commands. If you want to test your visualization without Data Storage, use the Start Display button. If you want data to be saved to either the Data Portal or File, use the Start Measurement button.
Let me know if this still doesn't help.
Derrick S.
Product Manager
NI DIAdem
National Instruments

Similar Messages

JDev 11.2.1 Commit button does not save data

I am using JDeveloper 11.1.2. I am having trouble saving updates to the database. I am trying to create an application that displays database records in a form, allows the user to modify data in the form and them saves that data to the database. I have successfully created the database, entity objects, view objects and application module. I created the form on the page by dragging the data control on to the page. I used the same method to create a table from the same data control. I included a submit button on the form. I dragged the create, delete and commit buttons onto the form. This application gets the data from the database, the user modifies it, select the submit button. This displays the change in the table. I can do the same with create and delete. However, I use the commit button to write the data to the database but it never happens. I have set up logging with –Djbo.debugoutput=console. I can see that the delete button {#bindings.Commit1.execute} is doing something but no change is made to the database.
Thanks for your help, Steve

I have had some success. I tested with the BC browser in my application and got the same results, no update. So I created a new application. I used the 'Create Business Components from Tables' option to create a set of Entity objects, Entity View objects, and Query View objects. The interesting thing I found was that when running the BC browser and trying to update the database using an Entity View object I had success. Was able to add and modify records and results saved in db. However, when I use the browser and try to do the same thing using a Query View object I get the behavior I've been seeing all along, it looks like it is working but not data saved to the database. In order to make the Query View object updatable in the browser I had to make all of its attributes updatable 'Always'. this made the view look updatable in the browser but no save. In my real application I did not have any Entity View objects. the Query View objects look the same so I didn't create any Entity View objects. So I want back to my real application, removed all Entity objects and Query View objects, recreated them with the 'Create Business Components from Tables' option. I created Entity View objects this time. When I drat a data control based on an Entity View onto my page I can make updates and the commit works.
I'd like to understand the difference between the Entity View objects and the Query View objects. Once they have been created I have a hard time telling them apart. The Entity View object for the Employee looks very much like the Query View object for Employee. There are some flags set differently and the Entity View object 'Entity Objects' tab shows the Employee table selected. I can tweek the Query View to look like the Entity View but it still does not behave the same, the commit does not save data.
Thanks for all the help, Steve

Report Template does not save

HI,
I am creating a new report template. On save I get this error: Error occurred while saving the document template; save again. Although I save again, it does not save the layout. At this stage I don't check the symbols as I have not yet created any into the layout. Even though I say 'check', it does not save at all.
Can anyone help. I have checked the File locations for Template folder to be correct C:\....\SAP\FrontEnd\SAPgui\wwi
Am on GUI 7100.3.12
Patch 12
Any recommendations ? Thanks

Hello Sanjay,
It seems to be DMS configuration issue. May be your system is trying to store the template document to external database by using "kpro". Please check for following two configurations:
1. Go to Basic Data & Tools-->Report Definition >Settings for Document Management>Assign EHS doc type to DMS doc type Here for doc type "SBV" , Ty. should be "SBV" and Data Carrier should be "SAP System" if you are not specifying any external server for document storage.
2. Next, Go to Basic Data & Tools-->Report Definition >Settings for Document Management> Check Doc types and doc statuses. Go to the "Details" of doc type "SBV", and uncheck "kpro" if checked.
If you have configured external server for WWI docs, then you need to define different data carrier.
Please tell if it solves your problem, otherwise you may be probably having problem with your document status management.
In that case, you may like to refer following SAP notes in sequence.
995736,1005225,1091699.
regards
Pavan

Firefox does not save toolbar I made

Since FF upgraded me to Firefox 23 My tool bars are messed
Every time I make a new toolbar Via "Customize" > "Add New Toolbar" after I exit it does not save.
Yes I read over 10 different articles on it.
1) I deleted the localstore.rdf and started from scratch. After 15 minutes of dragging all the icons to various toolbars I close out of Customize. I then restart Only to find my toolbar not saves and icon missing (placed back into the Customize Box)
2) Only solution ALWAYS given is going to Safe Mode and resetting everything.
That requires me to spend 5 hours backing all the settings and data I have saved in the various 189 items loaded.
Why so many? If not that many I would have to spend 6 hour more all day on my computer doing things that many of these addons do for me. Time is Money.
3) This is not the first time over the 8 years or so of using Firefox this has occured.
4) Question why doen't save when you close out of "Customize" than when you exit? Plus what in Firefox is messed up that it is not saving right?

Nope, I tried it again and added buttons to the New Tool bar I made and everything disappeared once I restarted Firefox up again. So they have not solved it. From FF 23 now on FF26 and it has not been fixed

When I am on Safari, the page randomly goes back to the previous page I was on. This is really frustrating when I am writing something online because it does not save my work. Fix for this?

When I am on Safari, the page randomly goes back to the previous page I was on. This is really frustrating when I am writing something online because it does not save my work. Fix for this?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

How do my boss and I share documents via iCloud? I log in as her to download a Pages doc, edit, then save to iCloud again but it does not save to hers. Even if I'm logged in as her.

I log in as her to download a Pages doc, edit, then save to iCloud again but it does not save to hers. Even if I'm logged in as her.
Thanks in advance!

This only works if you add her account as your primary accoun on your device and enable syncing "Documents & Data" in "Settings >iCloud".

Why BRBACKUP cmd does not save SAP control files?

Hello!
    We experience some issues running BRBACKUP utility to save SAP's data objects.
When we run the BRBACKUP cmd, we see that all tablespaces and configurations files
are save, but BRBACKUP cmd does not save control files. Why, we don't know?
BRBACKUP run throught AIX crontab and it looks like this ...
brbackup -u system/disapinst01 -c -m full -t online
the init<SID>.ora file looks good, we can see that the *.control_files entry is OK.
*.control_files='/oracle/<SID>/origlogA/cntrl/cntrlDDI.dbf',
                '/oracle/<SID>/origlogB/cntrl/cntrlDDI.dbf',
                '/oracle/<SID>/sapdata1/cntrl/cntrlDDI.dbf'
SAP's ENVIRONMENT
- HW: IBM pSeries Server (JS21) BladeCenter 8677-3RV
- SW: Plataform IBM AIX V5.3.0.0 ML 5300-05
- DB: Oracle 10g
Somebody help us, please!

brbackup copies one controlfile to /oracle/PRD/sapbackup and then backs up this copy.
look for a similar message in your log:
BR0319I Control file copy created: /oracle/PRD/sapbackup/CNTRLPRD.DBF 28680192
BR0077I Database file for backup: /oracle/PRD/sapbackup/CNTRLPRD.DBF

Compression does not save space

Hello All,
OS: AIX 5.2.
We are creating seven backup files every day.
We transfer files to our backup server via ftp.
No we have request to compress files.
So I create a backup folder and put all seven files into one pax folder as below:
pax -wvf backup.pax file1 file2 file3 file4 file5 file6 file7
ls
backup.pax Now I am trying to compress file as below but getting error:
oracle:>compress backup.pax
This file is not changed; compression does not save space.
DN

it's pretty universally accepted.The keyword is "universally". Bzip2 has better compression but it's very slow. This is the reason why bzip2 can't be universally accepted (I mean online content compression via HTTP etc. etc.).
But it's accepted by most of *nix clones. And if I need really save ma space then I use bzip2 rather than gzip.
Just little proof:
standard_bz2.log and standard_gz.log files are the same.
du -sh *
1.1G    standard_bz2.log
1.1G    standard_gz.lognow I'll execute following commands:
echo "GZIP"; date; gzip standard_gz.log; date
echo "BZIP2"; date; bzip2 standard_bz2.log dateand here is output:
GZIP
Mon Jun 12 12:26:38 CEST 2006
Mon Jun 12 12:27:38 CEST 2006
BZIP2
Mon Jun 12 12:27:45 CEST 2006
Mon Jun 12 13:12:29 CEST 2006
du -sh *
54M     standard_bz2.log.bz2
108M    standard_gz.log.gzGzip's compresion was fast (took just 60 seconds) and produced archive has 108M Size.
Bzip2's compression was much better and produced size of archive was just 54M but it took much time for compression.
So if you need quick compression and less of saved capacity then gzip is the right option.
If you need save space or you need better compression then bzip2 is the right option.

Safari 7.02 does not save my preference or view changes

Safari 7.02 does not save my preference or view changes

Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Iphoto 08 does not save noise or sharpness

I have just discovered that iPhoto 08 does not save noise or sharpness adjustments. What the heck...is there a "fix" for this yet?

The usual solutions:
Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
or
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Mac does not save settings.

Hi, I'm new here (I haven't got my mac for a long time either), so please bear with me!
I have a problem with many programs, namely my mac does not save the settings.
Word: The change of default Czech language into Polish is not permanent. Czech comes back after the restart.
Ableton: The authorisation of the program is withdrawn when I switch the laptop. I have to authorise it again after every restart.
Cubase: It changes audio input and audio output back to internal speakers and microphone after the restart.
Additionally, for example, I have changed the preferences of video files. I have changed the default player from QuickTime to VLC. Restart undoes the changes.
Has anyone have a similar problem?
Thank you in advance for your reply.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I get the firefox pop up "do you want to remember this password", but it does not save it. There is no "yes" option on the pop up. How can I get Firefox to save my passwords?

I want Firefox to save my passwords as it has in the past, but now it is not doing so. I am using version 6.0.2, I see the pop up asking to remember the password, but firefox does not save the passwords. What can I do to correct this so FF starts saving my passwords?

Firefox 4 and later versions place a key icon on the location bar that allows to (re)open the dialog to save the password at any time.<br />
That pop-up dialog has a button labeled with "Remember Password".<br />
If you click the arrow next to that button then you see the other choices ("Never Remember Password for this site", "Not Now").<br />

WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

Question
WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp

Submit MC.9 does not retrieve data in background processing.

Hi,
Im submitting transaction MC.9 in one of my programs. The submit statement seems to retrieve data when the program is run in the foreground, but when the program is scheduled to run in the background the submit statement does not retrieve data.
kindly advise,
regards.
Message was edited by:
sheldon barretto

Hi Tushar,
Thanks for ur reply.
I tried wat you asked to, but no spool was generated for the job. In SM37 it says that the Job (RMCB0300) is completed, but theres no spool list entry.
Does it mean i cant run MC.9 in background.
regards,
Message was edited by:
sheldon barretto

Why is my Apple ID not working in iTunes and App Store on my iPhone? Nothing happens if I click buy for apps or music. If I then go to settings/iTunes App Store my Apple ID is not there. If I then enter ID and password it does not save or link to account?

Why is my Apple ID not working in iTunes or App Store on my iPhone? When I try to buy apps or music it asks for Apple ID so I enter my info and nothing happens. When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account. I do not have this problem with iPad ID is stored and can be used in App Store and iTunes. I have just upgraded to 5c and it's still a problem.

LeesaHeeley wrote:
When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
Good luck.

Diadem Does not save data to neither portal nor file

Similar Messages

Maybe you are looking for