Diadem reporte

Muy buenas tardes...
Estoy realizando un programa en labview en cual inspecciona un peso y envia una señal de alarma si el peso no esta en el rango predeterminado...
tambien necesito generar un reporte de actividades... en el cual va registrado el lote de objetos pesados, la referencia de cada objeto pesado y si se encuentra dentro o fuera del rango....
este reporte debe llevar esa informacion en una tabla que se va llenando automaticamente desde el programa de inspeccion realizado en labview...
he intentado realizar un reporte en diadem, pero tengo un inconveniente al llenar la tabla con los datos de la inspeccion....
no se si hay que generar canales con los datos de labview.... o como se haria para llenar esta tabla en el reporte con los datos dados de la inspeccion realizada en labview
el caso esq cuando el operario de la orden de imprimir reporte este lleve todos estos datos
agradezco de antemano la ayuda y los felicito por estos foros los cuales son de gran herramienta para nosotros los usuarios de labview

Holla José,
Para hacer el report en DIAdem, tienes que crear los canales en algún Software, como Excel talvez, llenando la tabla con datos de LABView. Los canales son respectivos de las posiciones de su arquivo. Canal 1 = Coluna 1 e adelante.
Atentamente,
Filipe Silva
Application Engineering
NI Brazil

Similar Messages

DIAdem Report express VI works only with a single sheet template??

Hi,
I'm very new to Diadem and I'm using the 2011 evaluation version to try a report generation of LabView data (2013 version, evaluation also). I'm using the "DIAdem Report" express VI to generate a 2 pages, quite simple report; the first page has to contain some pictures and free text to be compiled with Labview strings, and the second page has to show an XY chart. The goal is to export in PDF file format.
Creating two separates TDR report models for each page and calling two instances of the DIAdem Report, the report is generated correctly with the expected value in two separate pdf files. If I'm using a report template with the two previous pages loaded in two sheets, the text value and the XY data are not loaded in the PDF file, causing a two pages empty export (only images, default text and chart border are visible).
I'm missing something? Attached a TDR file that reproduce the malfunction.
Many thanks in advance.
Solved!
Go to Solution.
Attachments:
1+2.TDR ‏59 KB

WorldTraveler
When I have a report that has multiple pages (Over 5) I like to use one tdr file for each of the pages, and then use the report append feature to make a resulting tdr and then a PDF.
(Search for report appending)
I make one cover tdr and one summary.tdr file, and then work to try to make the other sheets as reusable as possible. That way I can build each resulting large TDR from a appending of as many smaller tdr files as needed. This really cuts down on the maintenance time for reports, and results in large PDF at the end, so the users do not know the difference.
Paul

Error 7 occurred at _createExplicitChildObject.vi DIAdem report express

I am using DIAdem Report express in LabVIEW. I made a change in the file name and now it works most of the time but is generating an error. Sometimes it doesn't work.
C:\Neuronetrix_Sync\Development\LabVIEW Test System\SC-1673\Logs\110091507\110091507 Frequency Response 5983823
This is the file path, it is constructed using string tools and then converted using string to path, then create folder then piped to the DIADEM report and Export Image function.
I get an error that cancels out the program the first time, then on subsequent runs it works just fine but still generates an error.
Error 7 occurred at _createExplicitChildObject.vi
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
Error 7 occurred at _createExplicitChildObject.vi
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay
Attachments:
FILE name error.png ‏18 KB

In the screen shot you can see I am using to DIAdem expresses. When I was using just one express, and have everything wired up correctly, and everything works, i'm still getting the error.
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay

How can I find outliers in a DIAdem report using LabVIEW

I am new to DIAdem and I am trying to take a DIAdem report and find the outliers and mark them with an 'X'. I found an example of this but it uses a VB script. The example has a constant to determine what is an outlier. I need this to be a variable. Thanks for the help in advance.
AJL

Hello AJL,
an easy way to realize your task would be to use the VBS script you allready found.
You can call a VBS with the "Diadem run script.vi". Inside the VBS, just locate the parameter you want to change and replace it with one of the DIadem Variables (for a realvalue you could use R1 for instance). You do not need to declare those internal variables initially, they are part of DIAdem and free for everybody to use. Just make sure it is not used a second time in the script you are calling. Then, prior to running the script you just have to set the respecting variable with the "DIAdem variable set.vi". This allows you to change DIAdem command parameters from your LabVIEW vi.
Both VIs I mentioned above are part of the LabVIEW DIAdem Toolkit. In case you don't have it yet, you can download the functions at
http://digital.ni.com/softlib.nsf/websearch/5121C7F322C9392886256EDF005BB4FF?opendocument&node=132070_US
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

DIAdem report with more than 3 signals

Hi everybody!
How can I create a report with more than 3 signals as input. The DIAdem report accepts only 3 signals as Input.
In my opinion this is an very easy question but I could not solve it during a few hours!
Thanks in advance,
Manuel123

Thank you for your answer!
But I have still some problems.
According to your help I have connected eight of the signal-boxes to the connector. After that it is possible to connect up to eight signals to this sub-vi. Great!
But now I want show all these signals in the Diadem report, for this reason I created a new report-layout (see attachment) and wired the path of it to the "report layout file" - input. Unfortunately Diadem uses still a layout with just two signals and even if I open my own layout in Diadem there are only two data-lines listed in the "Data Portal: Internal Data" - panel.
Where is my failure?
Regards,
Manuel123
Message Edited by Manuel123 on 08-29-2007 10:00 AM
Message Edited by Manuel123 on 08-29-2007 10:01 AM
Attachments:
man.TDR.zip ‏11 KB

Hyperlink in DIAdem report

Hi,
I am wondering if it is possible to include a hyperlink inside DIAdem report and then, when exporting to PDF, have this hyperlink in the final PDF document.
I want to have a summary page with hyperlinks to other documents.
Thank you
Egor

Hi Egor,
Matthias is correct that there is no feature in DIAdem 11.1 or earlier to support hyperlink export to PDF files. However, if you have a valid URL as text in the REPORT, it will show up as an active link in the PDF file (when viewed by Adobe Acrobat Reader, but not in the Foxit PDF viewer). So if you want the URL to show up with the full URL text as a link, that's all you need to do. If you want a different text to become the URL link, then you need to use 2 texts, with the URL text on top and the descriptive text underneath. If you paint the URL text white, this will look reasonable-- here's an example TDR file and the PDF file it created (courtesy of R&D).
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Links For PDF Output.zip ‏45 KB

Diadem report generation

Hi,
I want to generate test reports automatically, so I chose using DIAdem as a report engine. But I am stuck at a point. Appreciate any help.
In our reports we need these fields: 2D string tables / 2D Axis Systems / Text Parameters
I started with DIAdem Report Express VI, but I stopped using it when i found that its impossible to transfer string arrays from LabVIEW to DIAdem. So I found Connectivity VIs. I had no problem with generating 2D tables and 2D axis systems. But I couldn't find any way for transfering texts.
I know it could be done with scripting or using ActiveX, but they have a huge API to learn.
What is the easiest way to transfer 2D string table and simple text from LabVIEW to DIAdem.
Thanks
Emre

There is a way to send text data. I use the following file. On the VI menu Connectivity-Diadem-Automation data- "Diadem variable set” Then select the text for the polymorphic version. Jim
C:\Development\LabVIEW 2009\vi.lib\addons\DIAdem\DIAdem.llb\DIAdem String Variable Set.vi

Problem mit Express VI "Diadem report" bzw. "Messwerte in Datei schreiben"

Hallo Zusammen!
Habe ein Problem mit dem Express VI "Diadem report" bzw. "Messwerte in Datei schreiben"
Mein Express VI befindet sich innerhalb einer While-Schleife, wo auch meine Messdaten (Regler mit Regelstrecke) generiert
werden. Folglich werden die "einzelnen" Abtastwerte der Regelung ständig in eine neue Datei geschrieben (somit erhält man quasi für jede Messung hunderte von Dateien bzw. einzelne Graphen pro abgetasteten Wert).
Habe auch versucht das Express VI ausserhalb der Schleife zu platzieren, was natürlich auch nicht geht, da so nur ein Punkt gespeichert wird (da es ja nur einmal aufgerufen wird).
Wie kann ich nur einen Report bzw. Datei für eine Messung erstellen...was mache ich falsch??
Brauche dringend eure Hilfe (LabView v8.2)
Gruß Stonei
Attachments:
Regelung mit PID Regler 51.vi ‏297 KB

Hallo Stonei,
wenn du das vi statt eines Bildes anhängst, können Forumteilnehmer leichter Änderungen vornehmen (Falls dein Arbeitgeber nicht gute Gründe dagegen einzuwenden hat.)
In deiner Schleife fehlen Shiftregister... Dein Indicator "Graph (W/X/Y)" ist höchstwahrscheinlich ein Chart, da du nur die aktuellen Werte übergibst. Sammle die Messwerte in Arrays, die über Shiftregister in die nächste Schleifeniteration übernommen werden. Dann kannst du auch einen "echten" Graphen verwenden Wenn die Daten erst einmal in SR vorliegen, lassen sich weitere Aufgaben recht einfach erledigen (z.B. Subarray auslesen und in Datei speichern).
Hast du dir die Beispielprogramme von Labview angeschaut? Da sind auch welche bei, die die Benutzung von Charts&Graphen demonstrieren - und da wurden garantiert auch Shiftregister benutzt!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Zeitdarstellung Graph und Diadem-Report

Hallo Zusammen!
Irgendwie bekomme ich es nicht hin in meinem Graphen eine reelle Zeit (X-Achse) anzeigen
zu lassen. Habe schon alles versucht und der Graph zeigt mir jedesmal falsche Zeitwerte, da er
diese immer über die Sample-Frequenz (Bis zum nächsten Vielfachen...) berechnet.
Stelle ich die Zeit des Schleifendurchlaufs auf 1s (1Hz), funktioniert es.
Ich möchte aber auch gerne andere Samplefrequenzen einstellen können und trotzdem eine reelle Zeit
angezeigt bekommen.
Habe auch schon versucht mit den Einstellungen, "Format und Genauigkeit" des Graphen zu experimentieren
...leider ohne erfolg!
Analog dazu soll auch die Zeit im Diadem-Report dargestellt werden...was mir ebenfalls nicht gelingen will.
Wie kann ich das realisieren?
Wär euch sehr dankbar, wenn ihr mir helfen könntet...
Gruß Stonei
Anbei meine VI's LV v8.2 / Diadem v10.1
Message Edited by Stonei on 04-13-2008 08:23 PM
Attachments:
SR-FlipFlop.vi ‏10 KB
Regelung mit PID Regler 18.vi ‏382 KB
Regleroptimierung2.vi ‏54 KB

Since your time interval can change during acquisition, you probably need and xy graph and keep track of the time.
(If the loop rate is fixed, you can use a waveform graph and set x0 to the start time and deltaX to the loop time using a property node). Currently, your x0=0 and dx=1, which has nothing to do with any reasonable time axis in this case.
You have some funny code in there! To initialize an array to zero, you could just use the default value of the output tunnel. Using "delete from array" with a lenght=Inf boggles the mind.
Message Edited by altenbach on 04-13-2008 06:52 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DeleteInf.png ‏10 KB

Save changes with Predefine settings... - DIAdem REPORT

Hello,
Is it possible to save the changes I make if I use the Predefine settings... option in the DIAdem REPORT?
With kind regards,
Stijn

Thanks! Easy solution

Diadem report generation from LabView: textbox, textobject, table

Hello everybody,
I'm trying to generate a report from LabView and want to use DIAdem reports as templates because they easy (I thought) to configure and design.
Well, I managed to include several pictures and textboxes that I can fill dynamically with the information I want using the reort generation vi, but I ran into some problems when it gets into detail:
I also need to include a bunch of statistical data in the report together with the name of the variable. e.g. it's supposed to look like this:
testname:

duplicate

How con i produce a colored .eps output from Diadem Report

Hello anybody,
I need your Help.
I want to export my Diadem report data to EPS with color. But when i
export ist via the export funktion of diadem i only get gray value EPS.
What went wrong and how can i fix tghe Problem.
I am running Diadem 9.1 under Windows XP on an AMD 64 3000+ processor with 526 MB RAM.
Thanks for your help
Jochen Fink
University of Ulm, Dept of Biomaterials

Hi Jochen,
as with many Windows applications, DiaDEM isn't able to produce EPS
directly AFAIK. A workaround is, to install a Postpcript printer on Windows
which will print to a file. Most PS drivers offers an option to produce
EPS instead of PS. Or you could print to PS and convert it to EPS using
ghostscript.
Another way could be to export a WMF/EMF. But here you need a vector
graphics progam which is able to work with WMF/EMF (most unfree Windows
programs) and to save to EPS (could be a problem again). But beware,
if I insert a WMF/EMF into Powerpoint e.g., it makes quite a difference
wether I paste it as WMF or EMF (dimensions are different, some
characters may get lost in WMF)! So I'd opt for the first way...
I hope this helps a bit.
Cheers,
Carsten

DataSetComments in DIAdem Report 8.1 vs 9.1

We are migrating from DIAdem 8.1 to 9.1 and are a bit confused about "DataSetComments".
In 8.1 we use an autosequence in DAC to feed DataSetComments in a standardized way for every measurement. In the Report template (*.LPD) the DataSetComments is viewed for each DataSet (= *.DAT-file !)
In DIAdem 9.1 this 1-to-1 relationship between DataFile and DataSetComments seem to be changed ?! (DataSets now include 1..many Files/Groups)
How to re-use our "File-based" DataSetComments in DIAdem Report 9.1 (*.TDR) ?
Best regards
Henrik

After some more Trial-and-Error I found that it works as expected if/when Data Portal is Empty when the DAT-file is opened, then the DataSetComments is set from the file as in 8.1.
Obviously I had some Channels already in the Data Portal when my DAT-file was opened before, then the DataSetComments from the DAT-file is not available. Lesson learned !
I tried the DataSetGroupCopy command anyway, and then I had new problems.
Check Attachment for details ...
Regards
Henrik
Attachments:
2005-04-13 DataSetGroupCopy.doc ‏752 KB

Error -2584 occurred at DIAdem Report

New to DIAdem,
I am running DIAdem 2010, LabVIEW 2010 and Windows 7. When I try to run the example Multipage Report.vi I get the following Error.
Error -2584 occurred at DIAdem Report
Possible reason(s):
LabVIEW: DIAdem could not be started. You must have DIAdem 9.1 Service Pack 2 or later installed to use the DIAdem Report Express VI.
If I open the DIAdem Express vi the areas Select Layout and Target are greyed out.
I have download the LabVIEW-DIAdem Connectivity Toolkit but have "broken vi's"
Solved!
Go to Solution.

Hi Patoh,
The error you are receiving could possibly be caused by the order in which your software was installed.
The usual installation order would be:
LabVIEW
Modules
Toolkits
Drivers
DIAdem
It is probably worth removing and reinstalling DIAdem on your system to see if this resolves your problem.
Post back to let me know how you get on.
Thanks,
Stephen C
Applications Engineer

How can I show groupped columns inisde Diadem report ?

Hi,
I am trying to show some values inside a Diadem report. I must show then in a similar way as "groupped columns" inside Excel, comparing different values in columns, just one columns next to the other one, but I do not know how I can manage it inside Diadem. With "bar" and outlined bars, all the columns are located at the same X point, so it is not the same as in Excel. How could I compare values of differet columns?
Thanks for your collaboration

Hi koniker,
Do you mean Y offset? If so, you can do it, but it's not a built-in feature, so again, you would have to shift the Y values up or down by Delta with the FormulaCalculator prior to graphing.
Normally multiple values occurring at the same X axis point are displayed either as lines and/or symbols. Bar graphs come up occasionally in DIAdem, but they're much more important for business graphing needs, thus the strong support of them in Excel.
What's your use-case? Are bar graphs the only acceptable choice? I can create and send you VBScript code to shift the bars either in the X direction or the Y direction, as you wish, if that's the optimal diplay. It just won't be a built-in feature.
Regards,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Create Objects in DIAdem reports with VBS

I wish to create objects in my DIAdem reports such as text boxes, frames, pictures, and graphs using VB Script. I know I can use the command "GraphObjNew(ObjType, GraphObjName)". But where can I find a list of ObjTypes? For example, I know that if I want to create a 2D Graph, the ObjType is "2D-Axis". However, if I want to create a text box, I do not know what to pass as the ObjType parameter.

Bill,
Here is a list of the objects you can create. Please note that some of them (like arrow, etc.) will not be available in DIAdem 8.x and 9.0x. They are new objects for version 9.1 that will be available in Augsut/September this year.
Script term Interface term, Explanation
2D-Axis 2D axis system
2D-Table 2D table
2D-Polar 2D polar axis system
3D-Axis 3D axis system
3D-Table 3D table
FreeText Text
FreeFrame Free frame
FreeGraph Any graphic
UserObject Text object
Arrow Arrow
Comment Comment
Circle Circle
Hope this helps. Let me know if you need more information,
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Diadem reporte

Similar Messages

Maybe you are looking for