Diagnostic-code: smtp;550 message was blocked by server (GWAVA blocked
I am having problems sending emails
diagnostic-code: smtp;550 Message was blocked by server (GWAVA blocked: ipreputation, reference ID: ,
The message is as follows:
Reporting-MTA: dns;BLU004-OMC4S31.hotmail.com
Received-From-MTA: dns;BLU436-SMTP7
Arrival-Date: Fri, 6 Jun 2014 09:57:27 -0700
Final-Recipient: rfc822;xxxxxx@xxxxxxx
Action: failed
Status: 5.5.0
Diagnostic-Code: smtp;550 Message was blocked by server (GWAVA blocked: ipreputation, reference ID: str=0001.0A0B0201.5391F2F9.0044,ss=1,re=0.000,recu=0.000,reip=0.000,cl=1,cld=1, fgs=0)
Any help would be great its been happening for a few days
Have you setup a Accepted Domain for your SMTP domain on the Exch server?
http://technet.microsoft.com/en-us/library/bb124423(v=exchg.141).aspx &
http://technet.microsoft.com/en-us/library/bb124911(v=exchg.141).aspx#EMC
And you may want to setup an EAP -
http://technet.microsoft.com/en-gb/library/bb125137(v=exchg.141).aspx
Sukh
Similar Messages
-
Diagnostic-code: smtp;550 No Such User Here
Could someone help me with this:
The user allready exist.
Your message cannot be delivered to the following recipients:
Original-recipient: rfc822;[email protected]
Final-recipient: rfc822;[email protected]
Action: failed
Status: 5.0.0 (Remote SMTP server has rejected address)
Remote-MTA: dns;mydomain.com (TCP|111.111.111.111|55964|222.222.222.222|25)
(domain.com ESMTP Exim 4.69 #1 Thu, 19 Feb 2009 23:34:30 +0200 )
Diagnostic-code: smtp;550 No Such User HereHow To: Direct Message and robind_vzw
-
Diagnostic code: smtp;501 DNS says just_hostname is not a real domain
Hi guys,
I'm running IMS5.2 in Solaris and i have a problem sending a mail to a specific domain. I can send mail to everybody but not to this one. I think the problem is in the other side, but i need to confirm this suspect and understand the error i'm getting. This is the report i receive when i try to send an e-mail to this specific domain( They are probably using MDaemon 6.8.5):
This report relates to a message you sent with the following header fields:
Return-path: <user@mydomain>
Received: from tcp-daemon.mail.mydomain by mail.mydomain
(iPlanet Messaging Server 5.2 (built Feb 21 2002))
id <[email protected]> (original mail from user@mydomain); Mon,
19 Jan 2004 08:31:33 +0200 (GMT)
Received: from mydomain (myhost [192.168.1.33])
by mail.mydomain (iPlanet Messaging Server 5.2 (built Feb 21 2002))
with ESMTP id <[email protected]> for final_user@domain_to_deliver; Mon,
19 Jan 2004 08:30:04 +0200 (GMT)
Received: from [196.28.224.7] by mail.mydomain(mshttpd); Mon,
19 Jan 2004 08:30:04 +0200
Date: Mon, 19 Jan 2004 08:30:04 +0200
From: user@mydomain
Subject: Teste da conta de e-mail
To: final_user@domain_to_deliver
Message-id: <c854a4.54a4c8@mydomain>
MIME-version: 1.0
X-Mailer: iPlanet Messenger Express 5.2 (built Feb 21 2002)
Content-type: text/plain; charset=windows-1252
Content-language: en
Content-transfer-encoding: quoted-printable
Content-disposition: inline
X-Accept-Language: en
Priority: normal
Your message cannot be delivered to the following recipients:
Recipient address: final_user@domain_to_deliver
Reason: Remote server rejected HELO command.
Diagnostic code: smtp;501 DNS says <just_my_hostname> is not a real domain
Remote system: dns;mail.domain_to_deliver (domain_to_deliver ESMTP MDaemon 6.8.5; Mon, 19 Jan 2004 08:44:34 +0200)
Any comments please!
Best RegardsIn your imta.cnf file, look down to the second part, marked,
"Part II, Channel Block"
Look further down, find
! tcp_local
tcp_local smtp mx single_sys remotehost inner\ switchchannel identnonelimited subdirs 20 maxjobs 20\
pool SMTP_POOL maytlsserver maysaslserv\ dequeue_removeroute\
tcp-daemon somedomain.com
The 4 lines after "!tcp_local" are all on one line. I've added the backslash character to show a continuation. The next line contains the tcp-daemon keyword, and is followed by what the server will send out on the ehlo/helo line. -
Reporting-MTA: dns; smtp03.bis7.eu.blackberry.com Final-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 (permanent failure)Remote-MTA: dns; [15.201.224.75] Diagnostic-Code: smtp; 5.3.0 - Other mail system problem 550-'5.7.1 Command rejected' (delivery attempts: 0)
What dones it mean ? It worked once (pictures from my Blackberry to the HP Photosmart Premium printer via e-print), but since yesterday no. Why ? Help please
Frédéric Kiener
[Personal Information Removed]Hi,
Check whether your Instance is up if not bring up the instance first. Try to logon to instance with DDIC user and reset the password to standard i.e 19920706.
Re-try the installation.
--Kishore -
TS4026 error code smtp;550 5.7.1
I am unable to send email. I received a message that I have exceeded my daily sending limits.
error code smtp;550 5.7.1The Actual Problem i am facing in my EXCHANGE SERVER 2010 is that.
I can send emails successfully to other Domains and Mails are also working internally and can access through Outlook Web Access. But the problem is that i could not receive emails from other domains. Whenever we send message from other Domain or G mail etc
we got the following error
smtp; 550 5.7.1 Unable to relay for *******@tns.com.sa.
I
can TELNET my port 25 and its working fine
I tried several times to create my HUB TRANSPORT Connectors but still same issue.
Kindly suggest appropriate solution to get rid of this Issue.
Farhan Iqbal -
Problem recieving email Diagnostic-Code: smtp; 530 Must issue a STARTTLS co
Hello all,
I am running OSX Server 10.4.9 configured mail services. I'm able to recieve mail from Yahoo. However when logging onto Webmail from Cox or when trying to receive email from others some are getting this messgae:
Diagnostic-Code: smtp; 530 Must issue a STARTTLS command first
I am kind of new to this stuff and can't fuguire out what this means or how to fix it... Any help would be great.
Second question does anybody now how to configure outlook windows users?Configure Pop, SMTP with SSL. I just want the mail server to be secure and don't want to end up with open relays for spammers...
I don't have alternate ports enabled. I read the web page and 'm confused as to how to do it?How exactly do I do this? I'm reading:Alternate SMTP Ports
To enable alternate SMTP submission ports, add one or both of the following to /etc/postfix/master.cf
For organization, paste just below this line:
smtp inet n - n - - smtpd
# Code to enable two common alternate SMTP Submission ports
# Modify the -o options to suit your requirements
# Option lines should start with one or more spaces
# Don't forget to open firewall ports for outside access
# Enable SMTP-TLS on port 587 with specified options
587 inet n - n - - smtpd
-o smtpdclientrestrictions=
-o smtpdrecipient_restrictions=permit_saslauthenticated,reject
-o content_filter=
-o smtpdenforcetls=yes
# Enables SMTPS on port 465 with specified options.
# This works well with Outlook 2003
465 inet n - n - - smtpd
-o smtpdtlswrappermode=yes
-o smtpdclientrestrictions=
-o smtpdrecipient_restrictions=permit_saslauthenticated,reject
-o content_filter=
After saving, from Terminal, issue:
sudo postfix reload
Note 1:
You can achieve the same setup by uncommenting the appropriate lines in master.cf. This tip uses the port# to be clear.
Note 2:
You can assign most postfix main.cf options to each port using the format above. The example code disables the content filter for user submittted mail (not the best idea for all sites, but very effecient), smtpdclientsrestrictions are bypasses and smtpd_recipient restrictions are set to only allow authenticated users to submit.
OK what do I paste and where? -
HT4623 "Message was rejected by server" WTH does THAT mean? Thanks!
What does, "Message rejected by server", mean? Thanks!
It means you are not properly connected to your email SMTP server. There could be something wrong in the settings of your email account. Try toning down your subject and the CAPS are not necessary. We are users just like you and remember you catch more flies with sugar than with vinegar.
-
Smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found
hello All,
I am getting the above error when i send a mail from external domain. I have exchange server 2010 on and O365 account. From last 2 months i am not using O365 account and even active sync is also not working. And recently O365 subscription was over. So now
non -synced users are not getting mails from external domain. Please find the below complete error.
The email address you specified couldn't be found or is invalid. It may be due to a bad entry in your Outlook or Outlook Web App recipient AutoComplete cache. Use the steps below to delete the entry from the cache:
Click New mail.
In the To field start typing the recipient's name or email address until the recipient appears in the drop-down list.
Use the DOWN ARROW and UP ARROW keys to select the recipient, and then press the DELETE key.
Then resend your message – delete and retype the recipient’s name or e-mail address before sending it.
For more tips on how to resolve this issue see DSN code 5.1.1 in Exchange Online.
Diagnostic information for administrators:
Generating server: DM2PR08MB368.namprd08.prod.outlook.com
[email protected]
Remote Server returned '550 5.1.1 RESOLVER.ADR.RecipNotFound; not found'
Original message headers:
Received: from BLUPR08CA0072.namprd08.prod.outlook.com (10.141.200.52) by
DM2PR08MB368.namprd08.prod.outlook.com (10.141.55.154) with Microsoft SMTP
Server (TLS) id 15.0.1010.18; Wed, 20 Aug 2014 16:55:58 +0000
Received: from BN1AFFO11FD021.protection.gbl (2a01:111:f400:7c10::118) by
BLUPR08CA0072.outlook.office365.com (2a01:111:e400:88d::52) with Microsoft
SMTP Server (TLS) id 15.0.1010.18 via Frontend Transport; Wed, 20 Aug 2014
16:55:56 +0000
Received: from mail-vc0-f171.google.com (209.85.220.171) by
BN1AFFO11FD021.mail.protection.outlook.com (10.58.52.81) with Microsoft SMTP
Server (TLS) id 15.0.1010.11 via Frontend Transport; Wed, 20 Aug 2014
16:55:56 +0000
Received: by mail-vc0-f171.google.com with SMTP id hq11so9516889vcb.30
for <[email protected]>; Wed, 20 Aug 2014 09:55:55 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=gmail.com; s=20120113;
h=mime-version:date:message-id:subject:from:to:content-type;
bh=UIg592euC1okrJydwvvU1ssSy4p+p3l+Nh+vpxrcn/Y=;
b=yhVCdHhs616U6+U4K7UqoQwm+eUrFgIJMKqmEUzREUgdgcgFtoM9+5MABnFeEjW7Cz
RT7vVTlH+v7nH/iW+nntxCRi4I3cqLUcAY8AgM5kGVoGBURCqo66dVbxWghB0HMDiZ7D
1AMDv1gez/PG8pmOpSVtkg1xmp0a/19vlPcqJ5ZRBlU/HdAuEYRp9M8ZBZLXgYF9RfDg
PphDqDLqDZ+Y7yNVIbAoC3gHA9kqfqAgWp3HOqRWb5TcRWI7sb9pj5ifYPQBVDJ6ozAS
jGfhzvxWHnbBPzVKqcCmkgrUVcSX8cUCrZqBjSk6c616nHSjVy6fRHnPdyIJ0Nzd6cnk
FR5Q==
MIME-Version: 1.0
X-Received: by 10.52.136.196 with SMTP id qc4mr15358922vdb.22.1408553755439;
Wed, 20 Aug 2014 09:55:55 -0700 (PDT)
Received: by 10.52.178.168 with HTTP; Wed, 20 Aug 2014 09:55:55 -0700 (PDT)
Date: Wed, 20 Aug 2014 22:25:55 +0530
Message-ID: <CA+GyOUV7n1V35=GRmzciyuocnAFngUN1Kba0XUbbT2QjEUb4Cg@mail.gmail.com>
Subject:
From: sai siva kumar <[email protected]>
To: <[email protected]>
Content-Type: multipart/alternative; boundary="bcaec51b12bd3d78fb0501127a3a"
Return-Path: [email protected]
X-EOPAttributedMessage: 0
X-Forefront-Antispam-Report: CIP:209.85.220.171;CTRY:US;IPV:NLI;EFV:NLI;
X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;UriScan:;
Final-Recipient: rfc822;[email protected]
Action: failed
Status: 5.1.1
Diagnostic-Code: smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found
ThanksHi,
Have you tried deleting the bad entry in your Outlook or Outlook Web App recipient AutoComplete cache as the error message suggested? If not, please have a try on it.
In addition, this issue may also occur if the on-premises mail-enabled user who represents the moved mailbox isn't stamped correctly with the target address. The Exchange server generates an NDR message because the on-premises Active Directory Domain Services
(AD DS) can't locate the user in order to route the mail correctly. To resolve it, please refer to this KB article:
http://support.microsoft.com/kb/2685437
Also have a look at the following article regarding 5.1.1 error:
http://technet.microsoft.com/en-us/library/dn479208(v=exchg.150).aspx
Since this forum is for questions and feedback related to Office Client side issue, you can also post a question in Exchange Online forum for further assistance:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thank you for your understanding.
Best Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
MulticastSocket. To whom MC message was sent?
Hi All,
My scenarion is:
1. I created MulticastSocket on port XXXX. (Server side)
2. Socket was joined to Multicast groups 228.5.6.7 AND 228.5.6.8 (Server side)
3. Multicast message was sent from another PC to group 228.5.6.7 Client side)
4. Message received by my MulticastSocket. (Server side)
The question is How i can to know to which group this message was sent on Server side?
Continue...
5. Broadcast message was sent from another PC to "255.255.255.255" (Client side)
6. Message received by my MulticastSocket. (Server side)
The question is How i can to know what this is Broadcast message and not from multicast group?
Continue...
7. Unicast message was sent from another PC to Server directly by IP (Client side)
8. Message received by my MulticastSocket. (Server side)
The question is How i can to know what this is Unicast message and not from multicast group and not from Broadcast?
I tried to create several MulticastSocket object on same port XXXX and each one was joined to its own multicast group. (First one to 228.5.6.7, and second to 228.5.6.8)
But then both of then received multicast messages which was sent to 228.5.6.7 OR 228.5.6.8 !!!
Please Help!!!
Thanks.OK, after spending some time and searching in this forum i found how to fix several of my problems (i bind all sockets to port only and because of this all sockets got everything...)
But one problem i can't solve.
The problem that i can't separate from Broadcast messages and multicast messages. So, if i have two Multicast sockets, where one was bound to 228.5.6.8:XXXX and joined to group 228.5.6.8
and second is for Broadcast only (bound to 0.0.0.0:XXXX) then when i send message to 228.5.6.8 then both of then accept it.
Is it possible to get only Broadcast message on socket which was bound to 0.0.0.0? -
The SMTP Error Code from a message that was not sucessfully delivered ?
hello,
I'm developing an aplication that uses Java Mail and
send emails, but I need to get the error code if this
email was not sucessfully delivered, use
mail.smtp.dsn.notify to destination return an email in case
of failure.
Thaks for your help.
rania+Do you mean the SMTP server reply codes? These are the codes that are returned when the client tries passing the message to the server. The are from RFC 821 (http://www.ietf.org/rfc/rfc0821.txt).
500 Syntax error, command unrecognized
[This may include errors such as command line too long]
501 Syntax error in parameters or arguments
502 Command not implemented
503 Bad sequence of commands
504 Command parameter not implemented
211 System status, or system help reply
214 Help message
[Information on how to use the receiver or the meaning of a
particular non-standard command; this reply is useful only
to the human user]
220 <domain> Service ready
221 <domain> Service closing transmission channel
421 <domain> Service not available,
closing transmission channel
[This may be a reply to any command if the service knows it
must shut down]
250 Requested mail action okay, completed
251 User not local; will forward to <forward-path>
450 Requested mail action not taken: mailbox unavailable
[E.g., mailbox busy]
550 Requested action not taken: mailbox unavailable
[E.g., mailbox not found, no access]
451 Requested action aborted: error in processing
551 User not local; please try <forward-path>
452 Requested action not taken: insufficient system storage
552 Requested mail action aborted: exceeded storage allocation
553 Requested action not taken: mailbox name not allowed
[E.g., mailbox syntax incorrect]
354 Start mail input; end with <CRLF>.<CRLF>
554 Transaction failed -
Problem in F110 - Print Job - Program RFFOUS_C - Message Code FS 550
we get a message code FS 550 which
says "Check number status at beginning of processing" The next line in the
payment log is "Program RFFOUS_C: No records selected".
I have tried looking for the cause of this problem - I looked into the
vendor master to check if the vendor has a payment block. There is no
payment block in the Vendor master. I looked into the proposal to see if
the document concerned was being selected. The proper document is being
selected and infact the payment document too is being posted properly by
the system. However, when one goes to the Printout option in the payment
run, the system does not print out the check. It gives the messages which i
mentioned above.
Any ideas what could be wrong ??
Would sincerely appreciate any assistance in resolving this issue.HI,
Try to see if the check is register on FCHN transaction. So, you will be able to reprint the check using FHC7 transaction.
Let me know your comments
Daniel -
Getting Diagnostic Code 550 errors when sending mail
Hi,
I've got a problem sending mail from OBIO and Zimbra web client. The message is returned by BeeHive SMTP server with diagnostic code 550 and status 500. I have set up my endpoint rules for email patterns *@mydomain and *@*. I have a relay to which all mails are forwarded. Testing by hand (i.e. telnet to port 25) works from the BeeHive server so I'm pretty sure the problem is in BeeHive transport configuration.
Any ideas?Do you use the simplerelay mode ? The release notes state that this mode does not work yet, so it could be the reason why it's not working.
If it's the case, (using beekeeper) just unclick the simple relay box, then corfigure your relay a bit lower on the screen. -
help plz so my gf said she block me and we txt back to back but later on i sent her a messages and it said it was read so am I blocked
The proper way to close Firefox is through the File menu "Exit" or the equivalent with the Firefox button.
More detail in item '''#38 Firefox already running '''
of
[http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6) (#fx4interface)]
Firefox already running, to properly shutdown Firefox when closing the last window use File → Exit/Quit (or Firefox button → Exit). Closing Firefox with the [X] in the upper right corner closes the window ("Ctrl+W") but that does not necessarily close Firefox if it has subtasks running. If you want to close and reopen Firefox use the "Restart" within Add-ons if you made a change requiring a restart, or install "[https://addons.mozilla.org/firefox/addon/restartless-restart/ Restartless Restart]" ("Ctrl+Alt+R") which will allow you to take Firefox down and restart without having to check the Windows Task Manager to see if Firefox first actually ended. [http://kb.mozillazine.org/Firefox_hangs Firefox hangs] -
Block code as my ipad was stolen. so it can not be used?
block code as my ipad was stolen. so it can not be used?
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
Tell us about your computer hardware.
A:Here is my specs:
i-7 4770 motherboard
8 gb of Ram
What operating system?
A:Windows 7 64 bit OS
If you are getting error message(s), what is the full text of the error message(s)?
A:After Effects Error:Crash in progrss.Last logged message was:<8020><GPU manager>Sniffer Result Code:3
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking?
A: Opened it and the error started@Todd_Kopriva
thank you very much it works now
Maybe you are looking for
-
My original iPad still shows iOS 5.1.1 as the current version with no opportunity to update.
-
Hi there, I'm a fairly new user to Robohelp 9.0.2. I'm generating html help from linked Word documents, and we've just deployed the first release. I'm starting to get some questions about search functionality. People are wanting to search on "mode" w
-
Who got caldav and carddav push running successful on lion server?
Hello everybody, I am running OS X Server since 10.5 server which I upgraded to 10.6 server in the past without problems, upgrading 10.6 to 10.7 was is a mess and none of my serveral upgrades attempts were leading into a "stable" lion server so I end
-
Being a newbie to Logic 8 still, I'm trying to understand of the bus. What exactly is its purpose? I think it's used as the output for a collection of tracks, is this correct?
-
Problem with Viewing Web templates
Hi, Iam facing problem with web template view which is designed.it is giving error even in preview mode and even on web. I would like to know which particular service in Sicf is needed to activate so that i can work with webtemplates in preview mode