Diagnostic Dashboard: SOA-OIM Configuration Check

Hi All,
I recently installed OIM 11.1.1.3 After installation when I try to search approval task, I am getting the following error:
<Warning> <oracle.iam.consoles.faces.mvc.common> <BEA-000000> <oracle.iam.platform.canonic.base.NoteException: An error occurred while searching tasks from the SOA Server.>
When I ran the check from Diagnostic Dashboard, I got the following result:
Test Name SOA-OIM Configuration Check.
Description Checks whether the details provided for SOA-wiring are valid or not.
Result Failed
Details
Invalid SOA parameters found in the configuration file of Oracle Identity Manager.
The following parameters are empty:
     RMI URL
     SOAP URL
     Weblogic Username
     Weblogic Password
Any idea which configuration file I will need to update to get it work?
BTW I did not get any error during installation and configuration.
Regards,
Gaurav

Similar Messages

OIM Installation - Diagnostic Dashboard Error

Hi,
When I ran the Oracle Prerequisites Check Test in the Diagnostic Dashboard before installing the OIM server, the test failed.
I received the following error message:
Unable to connect to the database
The root cause is...
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
However, the database instance is up. I gave the correct usernames and password. I suspect the port number is wrong. How do I check what the correct port number is?
I'm currently running Oracle Application Server and have Oracle Database.
Thanks,
Venk

Have you tested the connection with a tool like sqldeveloper ?
take same time and check the servername / SID and user credentials again.

Managed System SLM~ABAP is not configured (Step 10: Configuration Check)

When I try to spend the last procedure "Configuration Check" (item 10 - Managed System Configuration) I get here is only an error message
The definition of Technical System 'SLM~JAVA' is not correct: 'SLM~JAVA': Operating System 'Linux~2.6.32-358.23.2.' of Host 'sslm' must have at least one Software Component Version
'SLM~JAVA': Operating System 'Linux~2.6.32-358.23.2.' of Host 'sslm' must have at least one Software Component Version
Outside Discovery issue: refer to SAP Note 1611483
Managed systems setup | Managed System Definition Status (post setup) | SYSTEM =SLM~JAVA
What a way such settings: Managed systems setup | Managed System Definition Status?
I probably know only the tab SapSolution Manager: Configuration-> Managed system configuration-> Technical systems, but there make these settings is not possible.
How do I resolve this is "must have at least one Software Component Version"?
ps said note (1611483) has been done, but apparently no effect brought

Hi Michael,
Can you please check below :
Correct Software Component version is displayed in LMDB -> Host - > Tab Installed Software.
Managed System setup -> Assign Diagnostic agent -> Check SAP Host agents (to enusre agent is running)
You may restart both Diagnostic and Host agent and check again after few minutes if data is updated.
Additionally please check below SAP notes which might help resolve the issue :
1890035 - Error "Host 'hostname' must have at least one installed Technical system" during the step 'Check Prerequisites'
1799138 - Solution Manager configuration check returns "The definition of Technical System '{SID}~{STACK}' is not correct: '{SID}~{STACK}' : Operating System '{OSName}' of Host '{hostname}' must have at least one Software Component Version"
Hope this helps.
Thanks & Regards,
Nisha

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

Configuration Check Error in Managed System Configuration

Hi dear experts,
I come across a problem as the screenshot shows blew:
I check some relevant information, but no issues found:
1.
DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
saphostexec running (pid = 7094)
sapstartsrv running (pid = 7097)
10:46:34 24.06.2014 LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
saposcol running (pid = 7130)
DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
SAPSYSTEMNAME = SAP
SAPSYSTEM = 99
service/porttypes = SAPHostControl SAPOscol SAPCCMS
DIR_LIBRARY = /usr/sap/hostctrl/exe
DIR_EXECUTABLE = /usr/sap/hostctrl/exe
DIR_PROFILE = /usr/sap/hostctrl/exe
DIR_GLOBAL = /usr/sap/hostctrl/exe
DIR_INSTANCE = /usr/sap/hostctrl/exe
DIR_HOME = /usr/sap/hostctrl/work
service/admin_users = daaadm
service/logfile_000 = /tmp/s
service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
And the version of hostagent is up-to-date.
2.The URL
- http://<SMDhost>:1128/SAPOscol/?wsdl
- http://<SMDhost>:1128/SAPHostControl/?wsdl
can be accessed.
3.The step 3 in managed systems configuration is executed successfully.
4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
Now I have no idea how to proceed, please give me some advice, thank you in advance.
Best Regards,
Pany Pan

Hi Pany
Kindly check the below two sapnote
1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
Moreover , you need to check/verify/maintain the parameter in configtool
ThreadManager -> MaxThreadCount
Total number of Diagnostics Agents * 2 + 50
1250
ThreadManager -> InitialThreadCount
Total number of Diagnostics Agents * 1.5
900
ThreadManager -> MinThreadCount
Total number of Diagnostics Agents
600
ConnectionManipulator -> maxSoTimeOutConnections
Total number of Diagnostics Agents * 1.35
810
ConnectionManipulator -> MaxParallelUsers
Total number of Diagnostics Agents + 50
650
In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki
guide check the section Required Solution Manager Java Stack Settings (Scalability)
I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
minthreadcount , maxSoTimeOutConnections.
With Regards
Ashutosh Chaturvedi

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

Enabling LDAP Sync after OIM configuration in R2

Friends,
Did anyone tried enabling LDAP Sync after OIM configuration in R2?
I am trying to do the steps given in the below url.
http://docs.oracle.com/cd/E27559_01/integration.1112/e27123/oid_oim.htm#IDMIG4357
But I am not finding the below.
/db/LDAPUser
/db/LDAPRole
/db/LDAPRoleHierarchy
/db/LDAPRoleMembership
/db/RA_LDAPROLE.xml
/db/RA_LDAPROLEHIERARCHY.xml
/db/RA_LDAPROLEMEMBERSHIP.xml
/db/RA_LDAPUSER.xml
/db/RA_MLS_LDAPROLE.xml
/db/RA_MLS_LDAPUSER.xml
Few of them exist in /metadata/iam-features-ldap-sync but not all. I am not finding LDAPContrainerRules.xml any where at all.
Am I doing something wrong or this documentation is wrong.
Please suggest.

From another post, try following
I have not tiried it yet, but looks ok. Post your results/experiences, shall also try it out.
Find detail steps at below link
http://docs.oracle.com/cd/E27559_01/install.1112/e27301/oim.htm#CDDGJIBJ
http://docs.oracle.com/cd/E14571_01/install.1111/e12002/oidonly014.htm

Unable to start SOA & OIM Managed Servers

I am getting the following error when I am starting the SOA $ OIM servers - once the Admin server is RUNNING.
For the error pasted below , I took the following approach:
1. Added boot.properties file and provided the username and password for all the servers
2. removed the boot.properties file and had to provide the username and password separately. I also noticed here that I get the error below whether I enter the password or leave it blank.
3. reset the password for admin and managed servers followed by the backing up the domain - / data/ldap files (from admin and managed servers)
Despite these approaches, I am still getting the "Authentication denied error"
Looking forward for your suggestions.
<Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:960)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:141)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
        at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
        at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        Truncated. see log file for complete stacktrace
>
<Dec 12, 2013 6:44:27 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Dec 12, 2013 6:44:27 AM EST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Dec 12, 2013 6:44:27 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Try this :-
CREATE A NEW ADMIN ACCOUNT IN WEBLOGIC and use the below username and password for starting the servers:-
1)Shutdown the weblogic server
2)setDomain.env
3)back up DefaultAuthenticatorInit.ldift file under security
4)Go to security folder
5) java weblogic.security.utils.AdminAccount newAdmin newPassword .
6) goto servers data/ldap and remove the following file del DefaultAuthenticatormyrealmInit.initialized

No Function Identifier maintained. Configuration check not possible

Dear PM team,
While doing the Equipment installation with goods movement through IE4N, transaction code, system throwing following error messages.
1. No function identifier maintained. Configuration check not possible
2. Message for the configuration check.
Please guide me where i did the mistake? and suggest me how to correct this error message, without doing the changes in message controls.
thanks & regards
JK

JK,
My guess is that you are using Configuration Control.
If so, then have a look at these transactions:
PeteA

Configure Check-In disabled

hello everybody,
i'm configuring my CMS for a ISA project.
When i try to set check in part and press Configure Check-In button, the pop up appared but all field are disabled.
I cannot configure directory.
Where is the problem?
any suggestion?
thanks
Alex

assign nwdi administrators group to yourself

Where do we configure check register

Hi
while processing transaction FCHN, i have put a tick to "List of outstanding checks" still its showing all the checks which are cleared as well as outstanding, i hope there is some configuration missing
can anybody help me.

Hello,
There is no provision for configuring check register.
You can get the outstanding checks, provided if you have used FCHR to inform the system what checks are being cashed.
Used FCHR before FCHN.
Regards,
Ravi

ADF11g - integration with OIM -folder structure for OIM configuration files

Hi All,
I'm trying to make call to a remote OIM using OIM API, from my ADF backing bean onclick of a button
on the JSPX page.
I'm able to compile the page, but the issues I'm facing is that I'm not able to read the configuration details
specified for OIM connectivity from the OIM configuration files (authwl.conf, xl.policy, xlconfig.xml).
So do any one know what is going to be the folder structure for these config files (OIM), when we are integrating to
this API from ADF backing bean.
Thanks All .
Thanks & Regards,
Dharmathej M

Hi Daniel, thanks for the response but i readed that doc before asking here and that's one of the reasons of my question.
On the first line of the doc it says *"This appendix includes instructions that describe how to configure WebSphere so that Oracle Identity Manager (OIM) and Oracle Identity Analytics (OIA) can be installed on separate servers."*
It assumes both products are on different servers and also the creation of an new profile and node for oia.
WAS_NDS_HOME/AppServer/bin/manageprofiles.sh -create*
-templatePath WAS_NDS_HOME/AppServer/profileTemplates/managed*
-profileName oia-managed01 -profilePath WAS_NDS_HOME/profiles/oia-managed01*
-nodeName oia-managed01-node01 -hostname hostname*
Integrate the OIA node to the OIM Cell by typing the following command on the OIA Machine:*
cd OIM_HOME/xellerate/setup; ./xlAddNode.sh oia-managed01 oia-managed01-node01 192.168.21.9 8883 xelsysadm password1*
Our intention is to use same machines, servers,... oim is using so we don't need to use extra machines or create extra websphere objects.
Any tips on that?
Regards.

Personas Configuration Check

I've recently upgraded to Personas 2.0 SP02 and I'm having some trouble getting the RFC destination required for the Configuration check tool to work.
When attempting to create the RFC destination (as detailed in this blog: Personas - Enabling Configuration Check of Target Systems), I'm receiving an HTTP 404 - Not Found error when testing the connection. I've validated the host and port # are correct and working since I can successfully test the restgui service. The logon procedure I'm using is an SAP RFC Logon and the user has SAP_ALL. I'm unsure of what else to check??
Any and all ideas are welcome.
Thanx in advance,
Elder

Thanx Thien, after using that prefix path value to test I was able to successfully test the RFC destination. So I removed the prefix path and saved my entry.
I ensured that the HTTP Connection value in the Maintain Systems configuration points to my new RFC Destination and it does. However, when I go to the Configuration Check tool I'm seeing "Unable to determine configuration" for the last 6 in the Target systems list. Please see the attached screen shot.
All the information I've found points to an incorrect RFC destination causing the message below, but that's obviously working fine. Any idea what else it may be?

Note 1749935 & DBACOCKPIT::SAP Configuration Check

Hi,
my box has got SAP_BASIS 16 on ASE 15.7.0.131, do I must check note number 1749935 (SYB: Configuration Guide for SAP ASE 15.7) or DBACOCKPIT::SAP Configuration Check is enough?
Thank you.

Hi Ganimede Dignan,
If my understanding is correct. Are you trying to configure the DBACOCKPIT
if Yes, use the SAP note 1539124 - SYB: Database Configuration for SAP applications on SAP ASE
Regards,
Ankitha

Configuration check printing

How can I configure Check printing process step by step in SAP FI.
Please tell me step by step,
Ragards,
Ananda

HI
No configuration required for Cheque printing....
we need to develop cheque printing format by using smartform or sapscript
Mahesh

Diagnostic Dashboard: SOA-OIM Configuration Check

Similar Messages

Maybe you are looking for