Diagnostics for NI-7830R

I'm using an NI-7830R card, trying to use the digital I/Os. Some of the IO's don't respond when I set them to high or low, but others do . Is a diagnostic I can run?

Hi andyrward,
Thank you for posting on the NI Discussion Forum! Unfortunately, there is no R-Series diagnostic that you can run to verify the correct operation of your R-Series card.
A good place to start in verifying the correct functionality would be to run some of the shipping examples provided in LabVIEW. You can find these examples through the "Help" menu and select "Find Examples". Once the NI Example Finder is open, select the folder "Toolkits and Modules->FPGA->R-Series" to find exampels for this particular card. One good example to start with would be the "Digital Line Input and Output - R Series.lvproj" found in "Toolkits and Modules->FPGA->R-Series->Basic IO".
Is this a new R-Series card or is it a card that was previously working and suddenly stopped functioning properly on specific DIO lines? If you are still unable to get the DIO lines working properly with the shipping examples, please feel free to contact support at 1-866-ASK-MYNI. Thanks and please let me know if these suggestions help!
Mike Lyons
National Instruments
http://www.ni.com/devzone

Similar Messages

With the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

with the latest IOS 7.0.3 for my iPhone, it no longer syncs with iTunes. I've run the diagnostics for syncing and it says everything is working, which it clearly isn't. Is there anything to be done without restoring iPhone? Thanks

update : so after reading numerous posts, I tried unchecking entire playlist and just tried one of my playlists. That sync seemed to work, so I rechecked entire playlist and did the sync. It worked. Then I went in to my "walk to work" playlist and added some songs to see if it would sync now, and it did!!! so happy now. will see what happens tomorrow.

HT201401 In diagnostics for the iPhone 5, what does "Power Issue" mean? Is it covered by the 1 year limited warranty?

In diagnostics for the iPhone 5, what does "Power Issue" mean? Is it covered by the 1 year limited warranty?

That has to be just about the least helpful response ever recorded by anyone in the history of the Planet Earth. Thanks!

E2E Diagnostics for ABAP system

Hello,
I want to know steps involved to configure E2E Diagnostics for ABAP stack. I need to get workload analysis, Exception Analysis, Change analysis.. for ABAP Stack under RCA workcenters.
Can anyone figure out all steps in managing and managed systems.
Cheers
Das

Hello Das,
Follow all steps in solman_setup (initial, basic and managed system configuatioN) carefully and patiently. You must ensure everything is executed, then you will ensure that the Managed System connectes to Solution Manager through RFCs, SMD Agent and Introscope Agent.
To illustrate my point here, please check the image in page 4 of SAP note:
1332428 - Missing data in service sessions from BI/CCDB
Image caption is: 'Technical Infrastructure'
Best regards,
Guilherme Balbinot

Creative Diagnostics for Audigy SE

Where do I find Creative Diagnostics for the Audigy SE? It's not on the product CD and a search on the product support site yields nothing.

Here u Go.....
http://support.creative.com/Products...ET=CategoryID:

After security patch 03/04/2014 OSX 10.7.5, first one, then a second, external backup drive no longer recognized. Diagnostics for the FireWire one displays brand name of unit, but Time Machine and its own app don't see it. Where do I start?

Yesterday I installed the security patch, OSX 10.7.5 to my IMac that is about 2 years old.
Today my Seagate BackupPlus for Mac will power on but is not recognized. It does not show up as a device, Time Machine says the latest backup was DELAYED, last successful at 03/04/2014 9:35 PM (yesterday) and next backup would begin when the disk was connected. An error message I did not save said basically the drive was not recognized.   I did all drive's troubleshooting steps, including installing a newer version of their app. I tried swapping USB for FireWire, changing electrical outlets, etc.
It seems a bit coincidental to have 2 drives "fail" simultaneously. Is anyone else having this issue after this security patch? What would be the approach from the Mac side? TIA for any assistance.
Please see below regarding the second drive. Is this a red herring, or does it help pinpoint where the failure might lie?
I also have a Seagate GoFlex that WAS recognized until I did the troubleshooting on the other drive. When I put it back on after testing the other drive with FireWire, it now is no longer recognized.
Diagnostics says this about that:
FireWire Bus:
Maximum Speed:          Up to 800 Mb/sec
GoFlex Mac:
Manufacturer:          Seagate
Model:          0x6090
GUID:          0x2037600121908F
Maximum Speed:          Up to 800 Mb/sec
Connection Speed:          Up to 800 Mb/sec
Sub-units:
GoFlex Mac Unit:
Unit Software Version:          0x10483
Unit Spec ID:          0x609E
Firmware Revision:          0x111
Sub-units:
GoFlex Mac SBP-LUN:
Thirdly, in after one of the testing/reboot loops, the HP WiFi printer was no longer recognized, but after a few more it came back.

I have a similar problem.
Moreover, as my external drive is split in 2 for (a) regular storage // (b) time machine usage, I can see in the Finder that I can connect to the (a) regular storage part and use it normally (image 1).
And I cannot connect to the backup part in Finder , nor see it in Disk Utility, nor use it in Time Machine (although it's listed in the Time Machine preferences, image 2), as it does not connect (image 3).
Can somebody help?

Unable to enable diagnostics for a WorkerRole on Cloud Services

Hi,
I have problems with deployment of a package to Azure CloudServices, it contains one Worker Role, that is the log which I'm getting when I deploy it with diagnostics enabled:
6:05:29 PM - Applying Diagnostics extension.
6:05:50 PM - Preparing deployment for [...] - 2/9/2015 6:05:27 PM with Subscription ID '[...]' using Service Management URL 'https://management.core.windows.net/'...
6:05:50 PM - Connecting...
6:05:50 PM - Verifying storage account '[...]'...
6:05:51 PM - Uploading Package...
6:05:57 PM - Creating...
6:06:30 PM - Created Deployment ID: [...].
6:06:30 PM - Instance 0 of role WorkerRole is stopped
6:06:30 PM - Starting...
6:06:46 PM - Initializing...
6:06:46 PM - Instance 0 of role WorkerRole is creating the virtual machine
6:07:49 PM - Instance 0 of role WorkerRole is starting the virtual machine
6:09:22 PM - Instance 0 of role WorkerRole is in an unknown state
6:10:23 PM - Instance 0 of role WorkerRole is busy
Details: Waiting for role to start... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:10:04Z]
6:10:54 PM - Instance 0 of role WorkerRole is busy
Details: Recovering role... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:10:04Z]
6:11:24 PM - Instance 0 of role WorkerRole is restarting
Details: Role has encountered an error and has stopped. Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:11:01Z]
6:13:27 PM - Instance 0 of role WorkerRole is busy
Details: Recovering role... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:13:05Z]
6:15:30 PM - Instance 0 of role WorkerRole is busy
Details: Recovering role... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:15:09Z]
6:17:33 PM - Instance 0 of role WorkerRole is restarting
Details: Role has encountered an error and has stopped. Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:17:16Z]
6:19:35 PM - Instance 0 of role WorkerRole is busy
Details: Waiting for role to start... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:19:25Z]
6:21:38 PM - Instance 0 of role WorkerRole is busy
Details: Waiting for role to start... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:21:29Z]
What could be the reason for this failure? Are there ways to get more precise information about those exceptions?

Hi ,
How did you enable this feature in your project? I recommend you could refer to this documents:
https://msdn.microsoft.com/en-us/library/azure/dn482131.aspx
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Managed System Setup / Configure Diagnostics for Solution Manager itself

Hello,
I'm trying to run the "Managed System Setup" for the Solution Manager itself and
I got a problem in the step 4 (Diagnostics Configuration / Configure Diagnostics):
In the new opened window is only the ABAP stack displayed and the Java stack
is missing.
Does somebody know how to make the java stack visible?
From my point of view seems the configuration of the SMSY ok. The java stack is also
as "relevant" set.
The Solution Manger 7.0 EHP1 is on SP25.
Thanks in advance for your help!
Kind regards,
Joern

Hi Jorn,
I dont think its happening just because of your CR Content.
Still If you want to update it,then go to Administration Tab in SLD->>Import the latest CR Content from there.
As the latest CR Content is :SAP CR Content Version (sld/active): SAP_CR 7.6 (produced 11/17/2011)
And Jorn if you are stucked in the Diagnostic Agent registration then Go to Agent Candidate Administration->>In connection
Parameters Tab go to->>Custom SLD Connection Parameters->>Apply->>Mark the Diagnostic Agent you want to
connect->>Attach->>Give the password of the SMD_ADMIN->>Apply->>This way you will connect to the available Diagnostic
Agent.Hope this will help your problem.
Thanks & Regards
Ajitabh
Edited by: jitu001 on Dec 23, 2011 5:47 PM

Oracle Diagnostics for E-Business

Hi, I am trying to get my head around the current situation for Oracle diagnostics.
My understanding is that the older Diagnostics Framework has been replaced with a proper Diagnostics Module ( IZU ) available as a responsibility within E-Biz. From 12.1.1 this module is included in the base install. Prior to that the module is still available as a patch ( depending on what version of E_Biz you are on ) but only back to a minimum version of 11.5.4 ( with pre-requisite FND and AD levels ).
Q1. For this new Diagnostics Module - does it have an accompanying Catalog of tests within the patch for the Diagnostic module itself or is the catalog supplied via a separate patch ?
Q2. My understanding therefore is that a updated test catalogs are only available with each RUP of E-Business. However can you also added individual tests to your catalog as each test itself has a patch number - is that right ?
Q3. So the only cumulative batch of tests are those supplied with each RUP, rather than cumulative patches for the catalog - is that correct ?
Q4. If you are already using the older diagnostics framework on an 11.5.X system and you wish to use the diagnostics module ( IZU ) is it simply a case of installing this module through the appropriate patch ( and readme ) ? In such a case does the IZU module then override the older diagnostics framework that was in place
Any clarity appreciated,
thanks,
Jim

Pl post details of OS, database and EBS versions.
>
Q1. For this new Diagnostics Module - does it have an accompanying Catalog of tests within the patch for the Diagnostic module itself or is the catalog supplied via a separate patch ?
>
Both - the default IZU install comes with a standard battery of tests - these tests are updated thru IZU patches. See MOS Doc 235307.1 (E-Business Suite Diagnostic Tools FAQ and Troubleshooting Guide for Release 11i and R12)
>
Q2. My understanding therefore is that a updated test catalogs are only available with each RUP of E-Business. However can you also added individual tests to your catalog as each test itself has a patch number - is that right ?
>
Updates to test catalogs are available as individual patches for the IZU module.
>
Q3. So the only cumulative batch of tests are those supplied with each RUP, rather than cumulative patches for the catalog - is that correct ?
>
Not sure what you mean - each RUP will update the test catalog - and individual IZU patchsets will also update the test catalog.
>
Q4. If you are already using the older diagnostics framework on an 11.5.X system and you wish to use the diagnostics module ( IZU ) is it simply a case of installing this module through the appropriate patch ( and readme ) ? In such a case does the IZU module then override the older diagnostics framework that was in place
>
Yes - create/enable the IZU module as per the patch README - I believe doing so will override any older diagnostics framework (which diagnostics framework is this :-) ) ?
HTH
Srini

HT4216 Diagnostics for iTunes for Windows when iTunes won't run at all?

I would like to run iTunes diagnostics but am unable to get iTunes to run at all. Install and repair both report that iTunes is installed correctly. Are there any diagnostics available where iTunes will not run at all? Complete uninstall of all Apple products with registry wipe didn't help.

EULA! EULA! EULA! Greetings! I had the same problem on my PC for over a year! Itunes would download, appear to install correctly.. and then I'd get error messages about files not being found.. uninstall and start over to have the same thing happen again and again... I finally decided that I would track down the problem and I did!! Its very simple....
After install, a window pops up saying Itunes installed correctly. Theres a checkbox to RUN IT NOW that is checked by default.. THIS IS THE PROBLEM It tries to force itunes to run before you accept the EULA.. Uncheck the RUN NOW box and click done or ok.. and immediately, the EULA pops up.. Accept it and then run itunes from the desktop shortcut and it should work perfectly!

TC for Oracle E-Business Suite Diagnostics for Release 11i

For those who already installed this patch, how long it takes for each task:
Step 1: Pre-install Task
Step 2: Installation Tasks
Step 3: Post-install Tasks
Thanks.

Emmuel,
It depends on how many nodes and how many languages you have.
3636980This is a small patch (Size: 8.9K), and it should not take more than few minutes. Make sure you follow the steps in the Patch README file carefully.
4337683
This is '11i.AD.I.2', and it should take between (30 minutes - 1 hour). Please note the latest AD.I patchset available is 11i.AD.I.6 (Patch 6502082).
Note: 233044.1 - About Oracle Applications DBA Minipack 11i.AD.I
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233044.1
Note: 390671.1 - How to tell what your current AD patchlevel is
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=390671.1
7530017This patch would also take between 30 minutes to 1 hour.
Assign "Oracle Diagnostics Tool" ResponsibilityThis can be done directly from the application and does not take time.

Trying To Create Bootable Diagnostics for ThinkPad X201

I'm working on a ThinkPad X201 that spontaneously shuts down - no warning messages, no blue screens; the system just shuts off. Not only does it happen while using Windows (that's Windows 7 Pro, 32-bit), but it also did it while I was running memtest86, a generic memory diagnostic.
I've also tried SpeedFan to see if the computer is experiencing thermal shutdown, but SpeedFan has yet to register a temperature in excess of 50C, well below the thermal shutdown threshhold on most computers.
That said, SpeedFan isn't the be-all and end-all of thermal diagnostic tools, and irrespective of what it says, the computer did seem to be blowing very hot air the second time I ram memtest86. Before I go to the trouble (and my customer's expense) of taking the computer apart, making sure the fan and cooling channels are clear and replacing the thermal compound on the processor and other chips that the heat sink sits on top of, I'd like to run Lenovo's bootable diagnostics.
I loaned out my external optical drive, so for the sake of expedience, I've been trying to make a bootable diagnostic flash drive. Lenovo provides a utility for this, but I can't get it to work. Per the instructions, I downloaded the ISO file and the bootable flash drive utility to a folder, and named them diag-image.iso and bootable-generator-10.exe, respectively. I put a USB flash drive (a 32GB SanDisk Cruzer, USB 2.0 version) in a USB port, and Windows assigns it drive letter E:. From an elevated command prompt, I change to that folder, and run the command:
bootable-generator-10.exe --create -l lenodiags -u e -f diag-image.iso
All I get back is the following error message:
Validate bootable
Failed to verify flags.
The bootable in E:\ is not valid.
Can anyone assist with this?
Mark Lebowitz, Owner
Lebowitz IT Services LLC
Chicago, IL
Lebowitz IT Services LLC
Chicago, IL

The method for creating a Mountain Lion flash drive only required you to clone the installer disk within the application to the flash drive. Job over. No need for passwords. With Mavericks Apple provided a way to do it because the old method used with Lion and Mountain Lion doesn't work for the Mavericks installer.
Would have been nicer had they provided an easy application to do it, but they did not. So it requires the Terminal, they more or less hid the fact it was even there, and they provide no instructions for its use by less experienced users.

Where can I download Apple Hardware Diagnostics for MacBookPro2,1?

My MacBook Pro 17-inch Core 2 Duo (MacBookPro2,1)'s DVD drive appears to be faulty - It treats working DVD's as 'blank'.
I want to run Apple Hardware Diagnostics (AHD) on the machine but (a) I can't find the original DVD for the machine (b) in any event it won't work as the drive is faulty!
I know I can download older versions of AHD at http://www.info.apple.com/support/aht.html but where can I find one for my Mac?
I want to download it and 'restore' it to a hard disc partition so I can boot it from there.
Any ideas anyone?

Every Mac model has its own components different than any other, and the Apple Hardware Test is unique to each model. A handful of models share one AHT. A pile of them are available for download but are obscured behind a non-obvious naming convention. A partial list is here and here. Unfortunately Apple simply doesn't make it easy to figure out how to restore this.
What I've learned is that pretty much all intel Macs before 10.7 did have AHT preloaded on the drive, found in hidden folder /System/Library/CoreServices/.dianostics. If you reformat the drive and reinstall, this is not reinstalled. And if you encrypt the drive with File Vault 2 it would be unavailable in any case. With 10.7 and newer hardware, the AHT is stuffed into an AHTxx.dmg file and found on the Recovery HD volume, also in a hidden directory. So it can still be used when FV2 encryption is enabled.
Since install disks are gone, I don't actually know how current Mac owners are supposed to get this restored, however also since that time, Apple has moved to firmware that can load the proper version of AHT via option-D on boot with a wired or wireless internet connection. It doesn't permanently download this to disk, the firmware downloads and runs it, and upon reboot it's gone again.
So the gist is, once you've lost the installed version of AHT, you either need the AHT disk that came with your computer or buy one from Apple or go to an Apple store and they'll run it for you. Or you have a newer Mac with firmware that can talk to Apple directly (pretty much anything 2010 and newer) over the internet.

Enable Diagnostics for WebLogic Startup

Hi
I am using the Integrated WLS within JDeveloper Studio 11.1.1.5.
I am trying to diagnose a problem where the WLS is deploying an application at startup that is failing. I would like to get low level diagnostics during startup to enable me to debug the problem. Currently I am only seeing the stack that throws the error which is not sufficient.
Currently only 'Warning' and 'Notice' level statements are being written to the log files/console.
I have tried the following none of which have affected the level of messages displayed in the log files/console:
1) Add additional debugging Java options to the ADF Fusion Applications project I am starting the WLS from under 'Project Properties --> Run/Debug/Profile --> Launch Settings --> Java Options'. I have tried adding various WLS debug switches which have had no effect i.e. '-Dweblogic.debug.DebugDeployment=true -Dweblogic.debug.DebugDeploy=true'
2) Add debugging Java options above to Integrated WLS Launch Settings under 'Application Server Properties --> Launch Settings --> Java Options'.
3) Added debugging Java options above directly to startWebLogic.cmd script.
4) Enable all weblogic debug flags from the WLS console under 'Summary of Servers >DefaultServer >Summary of Servers >DefaultServer>Debug'.
5) Changed WLS startup scripts to enable environment variable 'debugFlag'. This results in the JAVA_DEBUG variable being set to '-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=%DEBUG_PORT%,server=y,suspend=n -Djava.compiler=NONE'.
5) Set the log level to FINEST for all 'weblogic*' classes in the Oracle Diagnostic Logging Configuration.
Surely there's a simple way of getting more diagnostics out of WebLogic during the startup phase?
Any assistance greatly appreciated.
Thanks

Hi,
It seems you did lot of things here but missed to make server logging in debug mode. As you have already enabled debuggers from admin console now go to servers > logging and change server logging to debug for all. This will help print the debug statements too.
For diagnostic you can enable it from admin console, but remember logging will be done in WLDF archive files that can be read using WLST only using WLST command - exportDiagnosticDataFromServer.
## rank the answer if it is helpful.. ;) ##
Thanks,
Ranjan
Edited by: Ranjan K on Apr 12, 2013 5:59 AM

How to Run Diagnostics for iTunes

I am having trouble downloading latest iOS for iPhone, and one suggestion is to select Run Diagnostics from iTunes help menu. I cannot find that choice in the help menu. Can anyone explain why? I have latest version of iTunes.

iTunes diagnostics run on iTunes for Windows, not iTunes for OS X.
iTunes for Windows: Gathering and using iTunes Diagnostics - Apple Support

Diagnostics for NI-7830R

Similar Messages

Maybe you are looking for