Diagnostics policy service not running on Windows 7 home premium

I'm unable to connect to internet through wireless connectionsr . it says limited access to wi-fi router. When i try to fix this it says diagnostics policy service not running. Checked services.msc While the type is set up to automatic Unable to start the
service. I had similar problem with my LAN connection. After resetting my LAN connection i was able to connect to internet. Tried this on wifi as well but the issue remains.
Error code is 5: access denied

Hi,
Thanks for the post!
Go to your Device Manager and uninstall the network device, including the wireless network card, then restart the computer. Let the system automatically reinstall the driver for you. You can also manually update the network card driver to the latest one.
After that, check if you can connect to the internet.
For the Diagnostics policy service issue. please click Start, input regedit in the search box, press Enter to open your Registry Editor, navigate to the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters.
Right click this key, choose permission, click the user "Trustedinstaller", ensure the permission is set to "Full Control" and "Read". Then click OK to apply the change.
Restart the computer to check if this service is working now.
Regards,
Miya
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Similar Messages

Cisco NAC agent services not running on Windows XP

Hi,
I've problem with Cisco NAC agent services on Windows XP professional SP3.
After first installation using user local administrator, the services of Cisco NAC agent on windows machine running well, but after logout, and login using another user which is registered in domain users, the services of Cisco NAC agent is going to stopped (going to Manual mode not automatic, and the status is stopped).
This situation is not happened on all windows machines, several machines running well.
Cisco NAC agent version 4.9.0.42
Has anyone seen this type of problem?
Below i attached windows machine information from ones running well and not running, Thanks
Regards,
Rian

Hi thanks for your answers, dbconsole is started in services.msc and also Agent, but goes on to say that the agent is not running.
In sysman log shows this,
"03/20/2012 13:38:54,553 [MetricCollector: HOMETAB_THREAD600: 60] ERROR rt.DbMetricCollectorTarget _getAllData.328 - oracle.sysman.emSDK.emd.comm.CommException: Exception in sending Request :: null
oracle.sysman.emSDK.emd.comm.CommException: Exception in sending Request :: null
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_ (EMDClient.java: 1330)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest (EMDClient.java: 1223)
at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics (EMDClient.java: 640)
at oracle.sysman.emo.perf.metric.rt.DbHomeTab._getAllData (DbHomeTab.java: 324)
at oracle.sysman.emo.perf.metric.rt.DbHomeTab.getData (DbHomeTab.java: 139)
at oracle.sysman.emo.perf.metric.eng.MetricCached.collectCachedData (MetricCached.java: 402)
at
at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread.run (MetricCollectorThread.java: 320)
at java.lang.Thread.run (Thread.java: 595)
20/03/2012 22:00:03,335 [JobWorker 772: Thread-13] ERROR em.jobs executeCommand.161 - UpdateARUTables: Oracle MetaLink credentials are incorrect or missing. Click Patching Setup parameters required to September."
In event viewer shows this,
"Agent process exited abnormally DURING initialization." but this message appears a few hours after having started the service.
I am using the Administrator account

System Restore will not run on Vista Home Premium

I cannot get system restore to run on my T61 using Vista Home Premium I get messages like:
"The Restore point could not be created for the following reason: The writer experienced a transient error. If the backup process is retried the error may not reoccur". It did.
I also get "Rescue and Recovery Backup Service stopped working and was closed. A problem caused the applicaion to stop working correctly. Windows will notify you if a solution is available." It did not.
I have also been advised no restore points are available.
The net effect is I cannot use System Restore at all!
Has anyone else had a problem like this with system restore? Lenovo has been no help.I have had a number of Dell computers and this is my first (and last) Lenovo. When it was quite new and the problem occurred , I contacted them but they just blew me off..
RHM

So i assume that your T61 originally came with Vista Home premium installed??? Did you make the Recovery Media disks when you first got your machine??? If not call Lenovo up and obtain those disks, and then use them to reinstall your service partition and your OS.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Laserjet 4240n driver does not work with windows home premium 64 bit

I recently was given a HP laserjet 4240n by my employer to use in a remote office. I am using a Windows version 7 home premium 64 bit laptop. I have tried the HP install wizard - no support for this printer. I have tried downloading the "correct" driver - but that doesn't work either.
I assume that there is something wrong but I have spent hours and still haven't been able to figutre out what is wrong and how to fix it!
HELP!
Thanks,
Steve

Hello Steve04104,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Dot3svc service not running in Windows 7. Error code:1747(0x6d3)

When i try to start the Wired Autoconfig service the following Error is being shown and the dependent services were already started.
Error 1747: Authentication service Unknown
I am not able to even start or stop the dependent services as they are grayed out.
When i tried to stop the dependent services through CMD the following error was shown:
[SC] Controlservice failed 1052
[SC] Controlservice failed 1062.
Please adivice

Hi,
You can reset the winsock first, and then check if this issue can be fixed:
netsh winsock reset
if this issue persists, I suggest you import a good known copy of following registry
to your computer:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\dot3svc
Alex Zhao
TechNet Community Support

Problem found: The Diagnostics Policy Service is not running

Whenever I attempt to run network diagnostics Windows 7 Ultimate response with Problem
found: The Diagnostics Policy Service is not running. <o:p></o:p>
I usually find my own solution to the network problem. However, not to the inability to run
diagnostics. In addition, in my attempt to find a solution, the Diagnostic
Policy Service Properties has become corrupted. The run under this account information
is not valid.
So I basically need the account and password for the service. In addition, once I have that info properly
inserted, I need a way to get the diagnostics to actually run.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Window search service not running

window search service not running how i can fix it?
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press

Windows Modules Installer - Autostart Service Not Running

I'm receiving in my health reports for four separate WSE 2012R2 deployments the below error. I've set the service to restart upon failure, but it seems this occurs upon every server reboot until I manually go in and start the service. However,
from my understanding this service only runs when it is needed, which would leave me to a false negative in the BPA scan.
Just curious if anyone else is getting this.
Autostart Services Not Running:
Windows Modules Installer

Hi MattSla,
On current situation, please type services.msc in RUN to open Services panel. Then navigate to Windows Modules
Installer service and open Properties. In General tab, please check Startup type of this service. Did set as Manual? Meanwhile, in Log On tab, please check which account this service used to log on as? Did log on as Local System account?
I check the Windows Modules Installer service in two Windows Server 2012 R2 Essentials in my Lab environment.
It seems that this service was set as Manual. Then Generate a Health Report in Dashboard, and didn’t find any error which was related to ‘Autostart Service Not Running’.
If this issue still exists, please open Event Viewer and check if find some relevant events. Those may help
us to go further analyze.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Auto-start services not running :Shell Hardware Detection in my Health Reports

Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
Auto-start Services Not Running Shell
Hardware Detection.
I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
Any Advice what might be the problem?

Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
From http://technet.microsoft.com/en-us/library/hh831394.aspx:
"After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK."
That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
Mark Berry
MCB Systems

The Data access service not running or not yet initialized.

Hello guys ,
i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error
OS : Windows 2012r2 patched and scom 2012 r2
sql : 2012 r2 enuff database size
tried few things as :
1. change the account to domain admin for system center data acess service still no luck
2. created registry keys for servicepipetimeout to 6000 bt still nit working
3. Refresh sql account used for sccom data aceess service still no luck
4. the service disappears as running after 30 seconds and the console is unable to open
kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
thanks guys in advance
Basit Siddiqui
AIG

Check that following:
Verify permission of SCOM Account on sysadmin and OM DB.
Check firewall that is disable
Check antivirus that didn't block scom folders or services.
Check SQL services is running
Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
Also you can check below link
http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Unwise.exe Files not run on Windows 8.1 SSSS

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

Director 11.5 "exe" not running in windows lower version

hi,
i have some project made in director mx2004 (d10) and convert it to director 11.5 but when i publish exe it will not run on windows 2000 or windows 98 (basically lower then windows xp2), have any one idea of that
thanks

This page shows the authoring and runtime OS requirements. Unfortunately, D 11.5 isn't set up to run on Windows versions earlier than XP. You may want to keep that earlier version of your .exe and make it available to users with 2000 or 98.

I have a dual boot system. Windows xp and Windows 7. Photoshop elements 7 would not run on Windows 7, so I purchased Elements 13. Slow as christmas. Not worth using at the speed it takes to do work on photos

I have a dual boot system, xp pro and 7 pro. Photoshop elements 7 runs fine on xp, but would not run on windows 7. Bought elements 13, Very, Very slow. To slow to work on photographs. I have bought new ram and done every other optimize ideas I have found online.
Any ideas. Asus anthlon 64 x 2, 4g ram, m2n e motherboard, NVidia video card, 2+ g processor

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

My office professional will not run with windows 8.1

my office professional will not run with windows 8.1 It ran fine on 7 and 8 but not 8.1

Microsoft Windows 8.1 officially supports all currently supported Microsoft Office versions including Office 2013 / 2010 / 2007 / 2003 , and may be even earlier versions unofficially. I use Microsoft Office Professional Plus on my Windows 8.1 and it runs fine with no issues. Could you try what has already been suggested by others including Big_Dave and reinstall Microsoft Office with complete reboot/restart between uninstall/new installation <restart, not shut down and start over>. If this doesn't work, please post again if installation went fine, what exactly is the error code (if any), what is the problem exactly, any screenshots ?

My JavaApplets does not run in WINDOWS XP

Java Applets do not run in windows xp internet explorer. Even I have downloaded and installed the latest version of JVM from Sun site but it does not work. Please help me in getting rid of this probelm.

do you get an error message? what happens?

Diagnostics policy service not running on Windows 7 home premium

Similar Messages

Maybe you are looking for