Diagram showing the connector pin assignments for a TBX-68 terminal block

Could someone provide me with a diagram showing the connector pin assignments for a TBX-68 terminal block? The terminal block is connected to a PCI-6204E board.
Thank you for your time
Andrew Lockyer

Since pins 1 through 68 are clearly marked on the terminals, I'm guessing that what you really want is the pin out of your DAQ board. That information should be in the manual that came with the board. I could find no reference to a 6204 board on NI's site so I can't point you to an electronic version that you can download. Double check the model number of your board. Once you locate the manual and the pin out of the 68 pin connector on your board, then everything else is simple. Assuming you have a 68 pin ribbon cable connected between the board and the terminal block, then pin 1 on the board is pin 1 on the terminal block, etc.

Similar Messages

Dimensions of the 160-Pin Cable for the NI PXI-2530B

Hello,
My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
Thanks!
Solved!
Go to Solution.

JKSH wrote:
Hello,
My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
Thanks!
What dimensions are you looking for?
I'm a little surprised that the length of the cables is not included in the datasheets (I did just look!) - I thought that when I ordered cables for the older-style PXI-2530 modules in my lab that the length was specified in the part description.
If you need the dimensions of the connectors, you can do a little reverse-engineering and identify the dimensions of the various components. The connector to the module is an LFH-160. The Digikey P/N for the body of a connector is WM4099-ND. It may be difficult to find the dimensions of the backshells, however. The 4 terminal block connectors are standard 50-pin D-Subs. There are many examples out whose dimensions you can review.
Jeff
Jeffrey Zola

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
You can manage your Apple ID here:
https://appleid.apple.com

I recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

Check this thread out -> iTunes 10.4 & Multimedia Keyboard
It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
pikot wrote:
Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
- You need to open a text editor (like notepad) as an administrator.
- Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
- Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
- Save the file
- Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

After a quiz can you show the questions and answers for the user to review from passing the quiz

After taking a quiz, is there a way to show the questions and answers for the user to review from passing the quiz.
And the ones who has failed the quiz would be directed to the first slide again to take the quiz over.
Thanks

Rod
I see that information about adding the review quiz button but on that last slide where it shows results, I want it jump back to slide 1 but it jumps to the first question of the slide. Is there a way around that?

My iPhone is not responding, it dosen't start. it is american and i'm in Brazil. it is locked with the screen showing the connector immage with written itunes.

My iPhone is not responding, it dosen't start. it is american and i'm in Brazil. it is locked with the screen showing the connector immage with written itunes

my iphone is not responding nothing comes on screen i wish u will give respond fast
i buy it from america and now i am using in india
today iam in bus that time i am using it when i acme to home it give no response

[svn:bz-trunk] 21327: Updated the sample destination config to show the new "none" value for cluster-message-routing

Revision: 21327
Revision: 21327
Author:   [email protected]
Date:     2011-06-02 08:51:22 -0700 (Thu, 02 Jun 2011)
Log Message:
Updated the sample destination config to show the new "none" value for cluster-message-routing
Modified Paths:
    blazeds/trunk/resources/config/messaging-config.xml

Thanks Carlo for your reply.
I have read again the link and you are correct that in using the preferred command together with localhost under POTS dial-peer, I can now select which correct path to choose for my outbound calls. I'm just not very strong with dial-peer and translation rules at the moment.
I will try this solution during the weekend and let you know. But it would have been better if there was a sample configuration for this option.

Why cannot the block diagram view of a VI show the "connector pane" view in the UR corner, like the front panel view does?

Perhaps there is a good reason for this that I just haven't figured out. I haven't seen any questions about it searching the NI site, however.
But it just seems totally inconvenient to always have to go to the front panel to get to the connector pane view, especially if some of those connectors are hidden. Then I have to go to the block diagram, guess which control/indicator I want to unhide, go back to the FP to check it on the connector pane, then go back and hide it again, and repeat if necessary. Even if the C/I is visible on the FP, it's still an extra step or two.
When I'm building connections using the block diagrams and planning where to put connectors in subVIs so they would be easier to wire up (line up inputs/outputs on sides, not have to go top-to-bottom, etc.), it sure would be nice to be able to work totally in the block diagram realm.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ
Solved!
Go to Solution.

Yamaeda wrote:
Good idea, put it in Idea Exchange!
It has been there for a while already. No need to duplicate....
LabVIEW Champion . Do more with less code and in less time .

MacBook don't show the login/pin screen after iCloud lock

I locked my MacBook Pro From my iphone But when i try to open it it show the apple logo then it shutdown (without showing where to put the pin code) When I use opetion when booting it it ask for the password I put it right so I have the bootcamp (windows work) but when I choose Mac or recovery it show the logo then shutdown , Any help !?? :'(
I have the OS X 10.9
And Windows 8.1 on BootCamp

I don't know if this would work when you are dealing with a Filevault startup, but this outside thread contains the following suggestion. You would need an external USB keyboard and mouse:
Operate the MBP the same way as you would in "Clamshell" mode. The external display will automatically become the primary. I operate my MacBook that way when at home. I keep the lid shut on the MacBook, have an external USB keyboard and USB mouse attached. Turn on the MacBook, immediately shut the lid and the video will automatically go to my large external monitor.
You must be on AC power for this to work. Will not work on battery only.

How to show the processing time taken for a BPEL process in BAM report.

Hi All,
I have the data as below in the Data object. I would like to show the time taken for each order to complete in the report.
instance Id     order Id     product Name     product Code     price     status     instance Time      updaterName
1360010     ord004     Guitar     prod003     2000     requested     9/22/2008 12:12:11 PM     Invoke_InsertSalesOrder
1360010     ord004     Guitar     prod003     2000     Approved     9/22/2008 12:15:11 PM     Invoke_OrderStatusUpdate
This data comes from simple BPEL process where sensors are configured at the start and end of BPEL process. Also have a human task activity in between to create the time difference.
In Enterprise link design studio, I tried to calculate the time difference using expression calculator and store it as calculated field. But that doesn't seems to work because when I execute the plan, second sensor data reaches only after human approval whereas first sensor data would be waiting for calculation and ultimately nothing comes into data object.
How and where the calculation be done to show the processing time in the report. Please someone throw some light on this.
Regards
Jude.
Edited by: user600726 on Sep 30, 2008 1:30 AM

I would suggest modifying your data object so that the data can all be in a single row and use the sensor at the end of the process to upsert (update) the row created by the sensor at the start of the process. The time difference between two fields in the same row is then an easy calculation on a BAM report -- No EL plan should be needed.

** How to show the master query group for once in Report??

Hi
I've developed a master-detail groups at a report
The master one has it's repeating frame and the detail one has another repeating frame and put at another page at the layout.
The porblem is that the master one is shown (the same record) in pages for times equal to the number of the detail records which is own for that master record!
Example:
if the master record has got three details then the master data will be show for three times (three pages) at run time and then the page number 4 will show the three detail records.
How to make the master data to be shown only for once (page number 1 only) and then show the detail three records at the next page (page number 2) at run time???

Hi,
the question back is, what you've done for this. At default the master record is only shown once. Could it be, that the master-fields are inside the repeating frame for the details?
Regards
Rainer

Show the company I work for that we should have one cluster

The company I work for have several projects where we are going to use RAC. The issue I'm having is they want each database to be in its own cluster hardware. I'm trying to show then that we should cluster all the hardware together and make small RAC database in the one cluster.
Does any know of anyone that has written a go doc how why you should have one cluster versus multiple clusters.
Example of what they are thinking of doing note this is all separate hardware cluster1 will not be cluster with cluster2 I'm try to show them if we cluster it all together we get more power and may not need so much hardware:
Project 1
cluster1_dev
2 nodes
cluster2_qa
4 nodes
cluster3_prd
4 nodes
Project 2
cluster2_dev
2 nodes
cluster2_qa
4 nodes
cluster2_prd
4 nodes
What I’m proposing is the following setup:
Cluster_dev
3 nodes
Project1 instance cluster on all 3 nodes
Project2 instance cluster on all 3 nodes
Cluster_qa
6 nodes
Project1 instance cluster on all 6 nodes
Project2 instance cluster on all 6 nodes
Cluster_prd
6 nodes
Project1 instance cluster on all 6 nodes
Project2 instance cluster on all 6 nodes

I am always impressed by choosing rac without having expressed what types of failures to be covered.
maybe you really don't need rac ...
moreover, rac is imho really not 2 nodes oriented but well grid oriented.
a lot of small server in the same cluster is for me the way to go or the the way to think.
Services features were introduced to allow one rac db to be shared by multiple applications.

XL Reporter- Report by Sales Rep show the same sales rep for all customers.

Hi,
When creating a report using XL reporter, Sales report by Item detail for all customers with selection by Sale rep ( expression) parameter, the report shows the name of the first selected sales rep name all through the report.
Please comment if there is any way to avoid this error.
Regards.

Thanks for the reply!
No, Since this is a sales by item detail report, we have already grouped it by Brand....
We do not want the report to be seen grouped by Sales rep, as that would group all transactions under different brands under one group.....
Regards

ITunes doesn't show the 5.0 update for verizon iPhone 4, iTunes doesn't show the 5.0 update for verizon iPhone 4

OK the 5.0 update has been out for a day, but my itunes still doesn't show the 5.0 update ( wants to update to 4.2.10 which I skipped) available for my verizon iphone 4. Anyone know what is going on? Is it just my phone? Do I have to do the interim updates first?

Check this link.
http://support.apple.com/kb/TS3540

Diagram showing the connector pin assignments for a TBX-68 terminal block

Similar Messages

Maybe you are looking for