Dial gauge with history
Hi,
I wonder someone can assist me with the following. I have a dial with a gauge on it. A bit similar to a speedometer. Like the following
http://rjdesignz.com/tutorials/speed-gauge-watch/
I can successfully draw the background image and rotate the gauge. My problem comes when I try and fulfill my new requirement to have a history of its current position to its new one. This gets reset every 10 seconds. I am thinking that I need to overlaying a transparent image over the existing one. But it needs to be dynamic! Is there a way to do this? If so can someone please help me?
Cheers,
Paul.
Sorry, but are you trying to record changes to your widget's model or it's view? I'm guessing the model, but it's hard to tell.
Similar Messages
-
Hi,
I am using 3D Dial gauge. I am trying to set the limits for red, yellow and green arcs.
My requirement is to set the arcs as 0-20: Red, 21-50: Yellow, 51-80: Green and 81-100 again Red, with the Min range and Max range as 0-100.
In the SVG Object properties, I am able to set the low and high limits to change the red, yellow and green arc limits but how to make the red arc repeat again is not clear to me.
Any idea will be a great help
ThanksRuchi,
I think that you will have to modify the SVG and change Red to two properties, Red1 and Red2. Then you will be able to map ranges to each. If you simply map a second range to the property, it will overwrite the first range entered.
Try exporting the svg used and modify that file in www.inkscape.com (a freeware svg editor) or some other svg editing package. You will then have to reimport and probably should define a new animated object with the modified svg.
If you have already solved your issue, please close this message.
Good luck,
Mike -
3D Dial Gauge - Color Change in Arc
Hi,
i am using 3D Dial gauge. i want to change the range for red, green and yello arcs. In default, it display red arc from 0 to 60. but i want to display green here and then yellow then red for some range. how to do it?
-senthilHi Senthil,
Open the SVG object in dynamic graphics editor. Choose animation links from the toolbar... In this case you will see an SVG element called yellow/green/red arc in the animation link editor...change the stroke property to color string(viz. "blue") then you will be able to change the color of the arcs....
for changing the range of the arcs, you can play with the high limit and low limit porperties of the SVG object.
coming to your case ...just change the animation link "stroke" for RedArc in the animation link editor
Regards,
Musarrat
I hope it helps -
Move/copy a pict, in another folder with history
Hello All,
i did found a way to do this so it can be seen as a wish list item,
i would like to be able to move a pic from a folder to another with history on it, let me explain.
suppose i work on a shoot serie of car into nature, and find a delicious natural spot, castle, forest, even portrait, whatever.
i import my car serie with all the images into ligthroom. in "mysupercarfolder" and see a pic who doesnt fit here, but i start tweak it, make it fun and pretty
i want to be able to move it into "mysupernaturalimagesfolder" with all the history of my modifications.
i'm missing something, or is that impossible ?That should do it, though !
Are your files Read Only? -
Is there a way to set up a 'dial string' with a 'wait' function?
I'm trying to set up calling my work voicemail. On the blackberry i could set up a dial string with a wait function. So when i dialed the voicemail #, once it answered I could hit a button on the phone and it would send the next set of characters (in this case, my extension #), then wait again, and once I got my password prompt, i could again send the next characters (now my password). I can find the way to put in a pause...but it isn't enough and doesn't do what i want it to do. How can i do this on my iPhone?
It really is important in that i don't want to have to enter these characters while i'm driving.Thanks for the reply....i've tried that and it's not doing what i want it to. Our VM sometimes has delays, so its impossible to predict home many pauses i need....really need a wait function.
Thanks -
Authorization to change BOM with history requirements
Hi Techies,
I m facing an issue now with respect to authorisation of changing BOM with history requirements. Our quality system was a copy from a production server which was used for CRM before. Usually in SAP when we change a BOM with a change number we cant again change it back without a change number.
In our case it is not providing an error but it is providing a warning. Now my requirement is to change this warning message to error message. So that people wont change BOM without a change number.
I tried to enter the transaction SU24 and found the authorizaton C_STUE_NOH with proposal YS. Then i tried to change the filed value to ' ' (NO) and saved it.
But still i m not able to change the warning message to error message.
Is there any other setting i need to carry out for this.
Please help me with this issue.
Thanking you in advance.
Regards,
Kris.SDear Krishu,
Below has been mentioned in OSS note: 420878. Check once again you have save as NO. Then go to tcode SU03 Object Class PP/ C_STUE_ROH
Summary
Symptom
In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
Additional key words
CS02, change number, OS27, W045(29)
Cause and prerequisites
Authorization profile
Solution
Check the authorization profile of the respective user.
Example:
C_STUE_NOH <OBJ>
&_SAP_ALL <AUT>
NOHIS <FLD>
would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
Regards / US -
Melita Predictive Dialer Integration with SAP CRM WebIC
Hello All,
Does any one have any information about "Melita Predictive Dialer" integration with SAP CRM Web IC.
Please let me know.
Thanks
Amar ReddyHello Amar,
I am only aware of a few customers who have integrated predictive dialing into the Interaction Center, and those customers all used Genesys or Avaya. I'm not aware of anyone who has done this with Melita yet.
By the way, I wrote a high-level Blog on the topic of automated dialing available on PBX:
Link:Does Automated Outbound Dialing Fit in Your CRM / Call Center Strategy?
Warm regards,
John -
While in camera raw, editing a photo, is there a way to back up a step or undo a step like you can do when you are in PS with history?
johnh316, There is no so called Backup step. However, you can undo the changes using Ctrl+Z.
Else, suggestions given by JJMack are worth following.
Since you are using Camera Raw, you can anytime revert back to the default state by going choosing "Camera Raw Defaults" from the Options Menu.
~ Arpit -
Dears
Please guide me what is difference b/w Master insp. characteristics with history and MICs without history.Also b/w UD with history and without history.Hi Ahmad,
As truly said by Jagdish, system will create new version with every change in MIC, & thus keeps the change record. This can be automated by activating the check Box in my IMG customizing.
SPRO->Quality Management->Basic Settings--->Maintain Settings at Plant Level, select any Plant details and click the check Box "Insp. Characteristics Are Maintained with History", before checking it press F1 to the field to know the further details.
E.g.
If you set this indicator, all released versions for the inspection characteristics are stored. If you access a released version using the function "Change inspection characteristic", the system creates a new version.
Pls do refer the link to clear your doubts.
[History for Basic Data|http://help.sap.com/saphelp_erp2004/helpdata/en/2d/350b6b448c11d189420000e829fbbd/frameset.htm]
[Change Usage Decision|http://help.sap.com/saphelp_erp2004/helpdata/en/18/43890e449011d189420000e829fbbd/frameset.htm]
Regards,
Shyamal -
Dear All,
TFS 2012 work items migration to TFS 2013 along with History,Links/Attachments & Custom fields?? is there any way..
Tried couple of tools:
1) Excel based migration : loss of data is custom fields, links, attachments, status
2) few tools in Code plex : Crashing/Not working.
Kindly provide your valuable comments here.
Cheers, TarunHi Tarun,
I'd like to know the tools that you used in CodePlex. Generally, CodePlex project is not supported in MSDN forum, and you can post your questions and concerns in the issue secton of the project.
If you use TFS integration tools, according to this
blog, it is limited to migrating only Version Control items, Work Items, and the links between them. Please check the limiation and have a check with your migration. For the customized fields, you might need to do the same customizatoin on the target
team project.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey. -
Bug: dial gauge is not working adf mobile
Hello there,
I try to use Dial Gauge component in ADF Mobile. However it does not consider the min/max value and value from my input. It shows only the default values. Any comment is appreciated.
Regards,
It is verified as an issue so it needs update.
Edited by: elmariachi on Feb 4, 2013 11:24 PMThat is a known issue (Bug 14654084) should be resolved in the next version through ER - 15935538.
-
Can you help? Two dialer interfaces with IP SLA for default route failover - issues
I have an issue with a Cisco 2821, it has an ADSL2+ HWIC whose ATM interfaces is linked to dialer 1 and a Gi0/1 interface with a pppoe client which is linked to dialer 2. Both dialer interfaces are up with their respective IP addresses. If the ADSL on dialer 1 fails i want the IP SLA to kick and and replace the default route for dialer 1 with one for dialer 2.
This config works if you manually shut down the dialer 1 interface, it injects the default route for dialer 2 and then when you unshut the interface, the default route for dialer 1 comes back. The problem i have is if you take out the cable for the ATM interface and take it down, it does not take the route out the routing table and the default route for dialer2, which works if you just shut down dialer 1 does not appear.
whats the difference between shutting down dialer1 and it fails over the default route and taking the cable out then it does not?
Here is my config, i'm sure its something simple i'm doing wrong, can anyone help???
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
logging message-counter syslog
enable secret 5 $1$qOOJ$HV5AH6US/YZMuCGPYp3pP.
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 192.168.0.1
ip dhcp pool pool1
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 188.92.232.50 188.92.232.100
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
voice-card 0
no dspfarm
archive
log config
hidekeys
track 1 ip sla 1 reachability
interface GigabitEthernet0/0
description Gi0/30 Local LAN
ip address 192.168.0.1 255.255.255.0
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
no ip mroute-cache
duplex auto
speed auto
snmp trap ip verify drop-rate
no mop enabled
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 2
interface ATM0/2/0
description ATM0_DSL
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
logging event atm pvc state
logging event subif-link-status
no atm ilmi-keepalive
dsl operating-mode auto
dsl enable-training-log
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface Dialer1
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
keepalive 1 3
no cdp enable
ppp lcp predictive
ppp authentication pap chap callin
ppp chap hostname ********@ccsleeds.net
ppp chap password 0 ********
ppp pap sent-username *******@ccsleeds.net password 0 ********
interface Dialer2
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
encapsulation ppp
dialer pool 2
keepalive 1 3
no cdp enable
ppp lcp predictive
ppp authentication pap chap callin
ppp chap hostname **********@adsllogin.co.uk
ppp chap password 0 *********
ppp pap sent-username *********@adsllogin.co.uk password 0 ***********
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1 track 1
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 0.0.0.0 0.0.0.0 Dialer2 10
no ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer1 overload
ip sla 1
icmp-echo 8.8.8.8 source-interface di1
timeout 1000
threshold 100
frequency 3
ip sla schedule 1 life forever start-time now
access-list 1 permit 192.168.0.0 0.0.0.255
control-plane
gatekeeper
shutdown
line con 0
line aux 0
line vty 0 4
password test
login
scheduler allocate 20000 1000
endSure that EEM can shut/unshut interface...you have "event track" in EEM for monitoring track events...for example:
event manager applet test
event track 1 state down
action 1.0 command "enable"
action 1.1 command "conf t"
action 1.2 command "interfac dialer 1"
action 1.3 command "shut"
action 1.4 syslog "Dialer 1 down!!!"
action 1.5 end
This would be an example from head :)
You would need another EEM similar to this one for unshutting interface with "event track 1 state up" for bringing interface up again.
Again as I said you would need to test this before putting in production and you would maybe need to tweak this a little bit acording to your needs...
BR,
Dragan -
When I disconnect my iPhone 4s from the charger, it gives me the dial pad with a emergency call option... help please?
Hello there, curtq.
Great job troubleshooting your issue so far. The following Knowledge Base article offer some great practical steps for troubleshooting Wi-Fi issues with your iOS device:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
If following the initial troubleshooting steps recommended at the beginning of the article, you may want to then proceed to:
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I'm recommending that my Dad buy an iMac for his next computer purchase. But he's retiring in a few months and the last he knew, there was no internet faster than dial-up available at his retirement home (barely any wireless signal, and probably satellite internet would be beyond his budget unless the price has come down significantly in the past couple of years since I checked). I was looking on the Apple Store, and I can't find any dial-up modems even available.
Is it even possible any more to have dial-up with a current Mac??? Suggestions?This is the one Mac-centric vendor OWC sells, so it probably works well with Macs
http://eshop.macsales.com/item/Zoom%20Telephonics/30950000G/
Apple used to have their own, but they don't seem to make and sell it anymore. -
On my iPhone I can update the 3G signal strength by dialing *228 with Verizon. Is there anyway I can update signal strength with Verizon on my ipad?
it does not really update your signal strenght, It disconnects you from network and reconnects you back. Termin is reprovisioning. Once your phone is reconnected it autmatically searches for the best cell on the closest tower. You can do the same by simply turning off your wifi radio (airplane mode off). As far as I know there is nothing on your ipad that will make them(verizon) to reprovision your account on their side.
Maybe you are looking for
-
External hard drive that stored music has crashed. How can I safely get my songs from my I Pod back onto computer into a new external drive?
-
How i can make the code execute after file finish downloading
Hi, i have a code that downloads a file then some code after , my problem is that code after does not wait to the file finish downloading how i can achieve that code is: String contentType = "application/x-download" ; FacesContext fc = FacesContext.g
-
I created a video of my graduate recital, and burned it onto a DVD+R disc. It took a while, but it burned correctly. But it will not play on my stand-alone DVD player OR my MacBook. What gives?? I tried it on a PC and it played for a little while (so
-
Error in converting video?? not enough memory??
I've tried converting a 1 hour video but halfway through conversion it stops and a message comes up saying "error: cannot convert video, not enough memory" I've tried deleting heaps of stuff off my itunes as well as my computer but it still keeps on
-
Edit Locally: The download of the document failed
Hello All- We've run into an issue on our portal (EP7, SPS17) where users can not Edit Locally. The command returns the warning "The download of the document failed". I've checked the logs and the configuration of Local Editing in System Administrati