Dial Graph Support?

Will Oracle add a Dial Graph Type to the next version of BIBeans? Will the next version of BIBeans coincide with the release of JDeveloper 9.0.5?
We're trying to determine if we need to purchase a third party server side graphing utilitily or wait a couple months for a BIBeans upgrade.
Thanks,
Laith E.H.

Is there a way developers could get a beta of the Dial Graph Oracle is going to eventually support?
Thanks,
Laith E.H.

Similar Messages

OBIEE Dial Graph

Hi all,
I'm using OBIEE 11.1.1.6 on Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
My fact is something like this:
Service    Ratio     Ratio_Green_Orange    Ratio_Orange_Red
S1         73        95                    90
S2         21        50                    10
S3         99        50                    30
S4         98        50                    20I'm setting in the DIAL GRAPH:
- GAUGE: Service
- MEASURES: Ratio
- Settings: Threshold Green to Orange --> Ratio_Green_Orange
- Settings: Threshold Orange to Red --> Ratio_Orange_RedI'm expecting:
S1 in RED area
S2 in ORANGE area
S3 in GREEN area
S4 in GREEN area
Unfortunately, OBIEE takes the color range for red/orange/yellow just for the first row (S1) and keeps it for all the charts.
If I move "Service" from GAUGE to GAUGE PROMPT, it works but I want to display all the charts...
Any idea?
Riccardo

Is there a way developers could get a beta of the Dial Graph Oracle is going to eventually support?
Thanks,
Laith E.H.

Does dvt:graph support stepped area curve?

Hi,
Does dvt:graph support stepped area charts?
Meanwhile I found following for line charts but nothing similar for area chart:
<dvt:series markerType="MT_STEPPED_LINE"/>
regards
Peter
Message was edited by:
hofespet

Hi,
ADF DVT graph does not support Stepped area charts, but we do have plans to add them in the future. But for now we only support 2 types of stepped lines: MT_STEPPED_LINE & MT_CENTERED_STEPPED_LINE.
Thanks
Katia

No Dial Up support with Mountain Lion?

My father updated his laptop to Mountain Lion. We have a cottage in north-western Ontario - not very tech friendly. There is no high speed or wifi, we only have dial up. We went to connect this weekend only to find out that they took that option away with the upgrade. What gives? We may be a small part of the consumer base, but really, we can't be the only place to not have these options?
Anyone have suggestions?
Tks!

see this page: http://support.apple.com/kb/PH10728?viewlocale=en_US
If you are using the Apple USB modem, it is not supported in Lion. Use a 3rd party adapter. The US Robotics USB Faxmodem and the Zoom USB Faxmodem are both OS X 10.7 compatible, as described in their respective manufacturers' websites. Zoom even gives you detailed information for setting up the modem in Lion.

Help with sql for dial graph

Hi
I have the following SQL query
select (count(select status from tbl_issues where status = 'Open' or status ='On-Hold') - count(select status from tbl_issues where status = 'Closed')) value , 100 max_value
from tbl_issues
when I save changes it comes up with the following errors
1 error has occurred
Failed to parse SQL query:
select (count(select status from tbl_helpdesk_calls where status = 'Open' or status ='On-Hold') - count(select status from tbl_helpdesk_calls where status = 'Closed')) value , 100 max_value from TBL_HELPDESK_CALLS
ORA-00936: missing expression
Certain queries can only be executed when running your application, if your query appears syntactically correct, you can save your query without validation (see options below query source).
what I want to do is display on the dial chart whether the performance of a helpdesk is poor or bad using the dials.
thanks for your help

Hi,
I did wonder about the "100 MAX_VALUE" setting!
For our help desk system (not in ApEx), they have statistics by month. There is also a graph showing how long it took them to resolve calls. You might consider something like that instead?
Regards
Andy

10.1.3 complex graphs support...?

Has anyone used 10.1.3 with Oracle Business Intelligence beans.
I need it for complex graphs for dashboard screen (jspx page) but when I try to download BI 10.1.2.2, I come across the following note.
Note that JDeveloper 10.1.3 is currently not supported
There is support for graphs in jdev 10.1.2 by using BI Beans 10.1.2.2 and also graphic capabilities in 11g but …
Why there is not support for the 10.1.3?
Is BI scheduled for release, which supports 10.1.3?
Is any other alternative solution in ADF for the complex graphs?
Thanks

Hi,
There is no Developer Suite release using JDeveloper 10.1.3 which explains why there is ne BIBeans integration. In addition, when implementing the JSF/ADF Faces development environment, the Graph components weren't ready. This will now come in JDeveloper 11.
Frank

Is the digital waveform graph supported in Measurement Studio?

I have an application that could really use the LV-style digital waveform graph in Visual C++. Are there any plans to support the digital graph in Measurement Studio?
Thanks, Bob

Unfortunately, there is currently not an equivalent of LabVIEW's digital waveform graph in Measuremeht Studio for Visual C++. You can fake some of the features with CNiGraph. If you have Measurement Studio for Visual Basic 6.0 installed, you can see some examples of this in the VB DAQ\Digital\Digital Waveform and Digital Waveform Continuous examples. Also, attached is a sample Visual C++ 6.0 project that demonstrates how you can simulate some digital graph features with CNiGraph. There's also a screenshot attached that shows what this looks like. Hope this helps.
- Elton
Attachments:
DigitalGraphExample.png ‏16 KB
GraphDemo.zip ‏19 KB

I can't receive my orders, and I waited 30 minutes three times when dialing the support hotline and nobody picks up the phone! FYI I am very annoyed now, and thank you for coming back to me ASAP!

This is the worst ordering experience I ever come across with in my life thursfar!
I've placing an order with two iPad mini (W4*****638), and the first one was delivered to me on Monday, however, the second one never arrives. And Apple has triggered an email asking me to call the support hotline 800908988 to provide the correct address in three days, otherwise the order will be rejected and 15% charges will be applied!
The following things made me really annoyed:
1. Why did it comes in two seperate orders as oppose to one?
2. I phoned the hotlines over three times (within the office hours) and each time waited for more than 30 minutes (before my next meeting starts and I have to cut off the line) with no response! I am not exaggerating!
3. I didn't even receive an unanswered phone call, so I don't know under what grounds that it claims I provided the wrong address (given that the first iPad was delivered successfully). On that front, attitude of the DHL delivery man of the first order was very rude, and if you want to trace back
Please kindly help address, otherwise, please let me know where I can escalate this issue.
Thanks,
Shyvee
<Personal Information Edited by Host>

Not what you want to hear, I know, but this is a user to user forum. No one here has the power to help you.
You can get information about an order you placed on the Apple Online Store through the Order Status page. If you prefer, you can also get order status or make changes by phone at 1-800-692-7753.
You can try calling again and if the person you speak to can't help, ask to speak to a supervisor.

Problems with 3D graph application redistribution

Hello wireworkers,
i wonder if
someone encountered problems with distribution of application that
uses 3D graph objects. I've created application that uses NI 3D graph
component and created installer with "Enable 3D graph support"
check box enabled. However after installing this application on the
windows machine without Labview two problems appeared: 1) "Error
loading control. A newer version needed. The default settings for the
control will be used." and after it 2) "You have 30 days to
evaluate the Measurement Studio ActivX control..." and something
like that. I don't get it. Why some newer version is required? and
what with that evaluation period?
Have any hints???
Thank you in advance and Merry
Christmas to everyone.
Alex
www.xinstruments.com
Custom Software for Industrial Automation
www.hdrconverter.com
Picture processing made easy

Hi Alex,
I tried the process you described on my machine using LabVIEW 7.1 and could not reproduce the behavior. If you can clarify the version you were using that will be helpful. I will have to clean a test machine and try it again without LabVIEW installed, and get back with you if the problem appears. In the meanwhile, I found the following KB which, while not referring to the exact same problem you are describing, does address the evaluation message issue. You can try to follow the steps at the end of the KB, and let me know if that worked.
http://digital.ni.com/public.nsf/websearch/1E1FB3C19E8E0A9986256F8D0077D0E6?OpenDocument
Regards,
Aluma G.
National Instruments

Collaboration with AI graphs and charts

Hi I am working with infographics and I want to use FC to move them from print to online. Unfortunately, once I tried to transfer an AI file with a pie chart to Flash Catalyst, it was imported as a bitmap, with no editing possibilities.
I would like to ask: is it possible to work around this and have an editable chart in Flash Catalyst? Do I have to look at Flash charts (like amCharts, for example) and drop them as .swf into my FC file?
Thanks for reading, awaiting suggestions

Bill, why not directly giving you a solution -there is alot of work going on in adding charting and graph support for future release of Jdeveloper....of course, that does not stop you using some graphing and charting features now but the new added features make the charting side of things much more drag and drop.
Regards
Grant

How can I customise graph in Report.

Hello,
I have used additional result to display the array in graph format not in table format.But how can I customise this graph.
Is their any provision for customisation of graph adding axis and multiple line in single graph.
we can choose graph ond table from report option.But can we choose both as per our requirement step wise.Example for step 1 we can use tabel and for step 2 we can chose graph.
thanks ,
Kulwant Singh

Hi,
Waveform, XY, intensity, digital waveform support multiple x- and y-scales, and all charts support multiple y-scales. Mixed signal graphs support only one x-scale. Use multiple scales on a graph or chart to display multiple plots that do not share a common x- or y-scale.
Complete the following steps to add a scale to a waveform graph or chart.
Right-click the scale of the waveform graph or chart and select Duplicate Scalefrom the shortcut menu.
To move the new scale to the opposite side of the display, right-click the new scale and select Swap Sides from the shortcut menu.
Associate a plot to the new scale by right-clicking the plot in the plot legend and select from the X Scale or Y Scale shortcut menus. If the plot legend is not visible, right-click the graph or chart and select Visible Items»Plot Legend from the shortcut menu.
To change the range of the new scale, use the Operating tool or the Labeling tool to highlight the end value(s) of the scale and enter a new value. If you set the scale manually, you should disable autoscaling.
I did not get the second part of your question, please clarify on that.

Graphs and Charts in ADF Faces Applications

Has anyone had luck implementing graphs and charts in an ADF Faces application?
I experimented with Oracle's BI Bean control a while back. But I think Oracle has yet to provide support for BI Beans in JDev 10.1.3. Does anyone know what Oracle's plans are for BI Bean support in JDev? Or what Oracle's plans are for providing ADF Faces graph and chart controls? It would make sense to me since Oracle has much experience with graph and chart controls and to their credit has developed over 100 ADF Faces controls which comprise one of the richest JSF implementations available.
I also looked briefly at JFreeChart for which open source is provided at apache.org and I believe someone had even taken a shot at encapsulating JFreeChart into JSF controls and posting the source at apache.org. Has anyone had experience with this?

Bill, why not directly giving you a solution -there is alot of work going on in adding charting and graph support for future release of Jdeveloper....of course, that does not stop you using some graphing and charting features now but the new added features make the charting side of things much more drag and drop.
Regards
Grant

3d Graph shows "Evaluation copy" in distributed executables

After I built a LabVIEW 7.1.1 application using 3D Graph (including 3D Graph support), it worked fine on my machine. On another machine without LabVIEW 7.1.1 installed, there is a popup saying:
Error loading control. A newer version needed. The default settings for the control will be used.
The control itself displays a large Evaluation Copy but it works.
There are other posts reporting similar behavior but nothing that applies to that situation.
My guess is that the ocx installed by the Installer is not the same as the one installed on my machine which may have been updated with recent versions of VISA.
I tried to reinstall the LabVIEW 7.1.1 update but it says that there is a problem with the installed Run-Time Engine.
On development machine: cw3dgrph.ocx is version 8.0.0.212
On the installed machine: cw3dgrph.ocx is version 7.0.0.344
How do I fix thiat?
LabVIEW, C'est LabVIEW

JeanPierre,
I hope you're doing well. Just to clarify, this issue only happens when you distribute your application in an installer and run it as an executable on a PC without the LabVIEW development environment? If so, NahoY's comment is very pertinent. This KnowledgeBase discusses some advanced techniques for using Application Builder, which includes building an application with an .ocx file and running a batch file to register it. Let us know if this is helpful!
Thaison V
Applications Engineer
National Instruments

Unlink x-axis marker values from graph scale

Say there are three points to plot: y-values 2.1, 2.2 and 2.3. The x-values are 0, 1 and 2, respectively. How can the x-value marker values be changed to 22, 50 and 100 without rescaling the plot's x-axis?

> I've tried this with all graph types. I want the points to be evenly
> spaced on the x-axis. I want the marker labels on the x-axis to be
> arbitrary. e.g.: plotting gain error (y-axis: generally {-1%..1%})
> versus gain setting (x-axis: generally {48, 24, 8, 4, 2, 1, 0.5,
> 0.025...}).
>
The LV graphs support linear and log scaling, and they support a linear
transform between the plotted value and the labeled value, but you are
correct, they do not allow arbitrary labeling of the points on the scale.
To work around this, you might look at placing cursors/markers on the
graph. Show the text labels, hide the lines and points, and set the
color however you like for the text. The marker location can be at the
bottom or top of the g
raph, and the text can be your arbitrary values.
Then hide the X Scale.
Another approach is to hide the scale and have an array of strings or
numerics that you overlay. The problem with this approach is that as
fonts change when you change platforms, or MS changes the default font,
your array and graph won't line up. The markers on the graph always will.
Greg McKaskle

Transparency for plots in graphs and charts

In addition or extention to this idea
http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Graphs-and-Charts-with-semi-transparent-fill-option/idi-p/1530960
I would like to have a transparency control/property in the colour selection for plots in graphs and charts.

Bill, why not directly giving you a solution -there is alot of work going on in adding charting and graph support for future release of Jdeveloper....of course, that does not stop you using some graphing and charting features now but the new added features make the charting side of things much more drag and drop.
Regards
Grant

Dial Graph Support?

Similar Messages

Maybe you are looking for