Dial pad does not display

Was trying to enter a conference call tonight and the dial pad was not displayed. Tried to type the numbers into the screen via my keyboard and it was not recognized. When will this be fixed.

Tamim ~ no you are wrong, it doesn't display. I used it for my free trial, and as others are saying, as soon as I signed up for phone calling, its now disappeared, and just as others report it only appears while you're IN a call. real helpful then (NOT)
also, in trying to respond here to you, I click reply and skype requires me to re sign in, put in my email and phone - which it ALREADY HAS, and then I had to figure out how to find my way back to this thread. THAT was real user friendly. wow. Do you want to stay in business? So far - really awful now that I've actually PAID you. Using you for free was great. Now am a subscriber and ~ woops, no key pad.

Similar Messages

Droid x2 phone dial pad does not respond to touch on call

When on a call and asked to input numbers even to get to voicemail phone freezes and will not accept certain numbers like 1 (but it may take an 8) or screen goes black or both. Cannot get my voicemail from this phone. Can call in to my cellphone number from another phone and stop message and then get the vm, but from the droid x2 cellphone it is impossible. Obviously very unsatisfractory. Anyone got a fix?

As Ann pointed out, you are running GingerBread - the latest update. You don't remember clicking on "ALLOW UPDATE" and the process of installing it?
Anyway, so you've had this problem since DAY 1 of getting the phone????? Too bad you didn't take it back immediately as they would have probably given you another phone .. but now you're pretty stuck with troubleshooting it or getting it swapped with a CPO. If you contact verizon, they will like have you try booting in SAFE MODE 1st, just to rule out 3rd party APPs causing the issue. Then a Factory Reset.
Click this for SAFE MODE http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=34184
Click this for Factory Reset http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=33552
good luck.

Call using Skype Dial pad is not sending outgoing ...

Hello,
We are using Desktop API’s to get the events from Skype to our application. When we are doing an outgoing call using Skype dial pad, we are not getting an outgoing call event from Skype in our application.
But when we do call from skype contact list we are able to get outgoing call event and process it.
Is there known issue with dialing with Dial pad does not send outgoing call event?
//Sanju

Fixed my own problem, IT was my Host file under Windows>System32>drivers>ectThe file was made in such a way that I did not relize I chound't edit it with Notepad without permissions. Also I don't remember adding anything to it, oh well. Long story short, if any of you internet searches want my advice on what to do. Copy the entries in your host file maded by programs "Example: Uncheacky and SpyBot (It will be listed which ones are made by who)." Copy wanted entries to a regular text file on your desktop. Delete your real host file in the director above, deal with readding your wanted entries latter and enjoy talking to your friends again.

MY LIST OF 'DEVICES' ON 'FINDER' HAS 'TURNED OFF' ( does not display list and does not show as bright) AND I CAN'T SEE MY LIST OF DEVICES (TO EJECT A DISK, OR ADD A FILE TO A DISK) ETC)??

my list of 'devices' on 'FINDER' has 'turned off. gone to not (bright ) does not display backup disks or I- pad etc. I can't see my list to eject a disk or copy a file to I-Pad etc???
Also how would I un-zip a file I have downloaded to "download" and then copy it to a disk??

Hold down OPTION COMMAND and click S
Regards,
Captfred

Nokia E73- Call log does not display entries

I recently purchased a E73 by itself.
For some reason the call log does not display any telephone numbers or activity in recent calls; missed calls, received calls, dialed numbers. It would show that I have a missed call but when I enter it, it says (no missed calls).
Any ideas? Please let me know...
Thanks

Enable and set log duration to 30days.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I-pad does not render OBIEE charts/graph

OBIEE charts graph shows on PC but does not show on apple ipad
I-pad
Version 3.2 (7B367)
Safari
Oracle Reply:
OBIEE 10.1.3.4.1 is not certified on any mobile device browser.
The tables and other lay out shows crystal clear on i-pad but Charts does not display. Is it because of Flash not supported on i-pad? Any way around?
Please advice

Document:
http://www.oracle.com/technetwork/middleware/bi/business-indicators-config-166769.pdf
In short:
1- Add those two lines to your instanceconfig.xml to generate png instead of flash chart (because flash is not supported)
<Charts>
<DefaultImageType>PNG</DefaultImageType>
</Charts>
2- Install the app from the appsotre
3- in Buiness indicators enter your environment URL adress and put your administrator user password.
Thanks,
Srinivas

Adobe Bridge CS3 - does not display thumbnails for Canon 40D or 50D RAW files

I wanted to use Bridge to view my Canon EOS 50D RAW files and it does not display the thumbnails, just icons. I checked my 40D cr2 files and saw same thing.
I have purged the cache and rest the cache preferences and it has not helped. I would like to be abl eto view the thumbnails of the RAW files via Bridge if possible. Jpg files and Tif files can be viewed without any issues.
Am using Bridge version 2.1.1.9 and Pshop CS3 10.0.1

I have the exact same problem. I can view my RAW file thumbnails (which are .ARW files from my Sony A200 camera) in the Finder and in other applications, such as Preview, but not in Adobe Bridge CS3. I know that I did try purging the cache at one point to see if that would fix it, but then I didn't know what to do after that. Before I purged the cache, I was able to view RAW thumbnails in Bridge, but then they would not increase in size when I tried using the slider (at the bottom right of the Bridge window)

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

MENU item selection does not display drop down in ITS enabled transaction

Hello,
We are experiencing a strange behavior between two portal env.
1. DEV.
For example we have transaction MM01 display in the Portal via ITS (integrated). The end user can select the Menu Tab and the System Tab and the drop downs appear as expected.
2. Prod
Same scenario as above. Only this time, end user is unable to select the button. The Menu and System Tab dont appear greyed out but selecting it does not display the drop down.
Material, Edit GoTo Defaults are some of the links under the Menu tab for MM01.
Very confusing. And this is the behavior in Prod for all transactions. Any ideas on why this is happening would be greatly appreciated.
The architectural difference is that DEV has no Web Dispatcher versus Prod has the Web Dispatcher.
We are on EP 7.0
Many thanks.
Regards,
Sunil

Thanks. Now, I realise this may cause dismay to some, but I have now solved the problem, and just wanted to share my experience with those even less savvy than myself. In Dreamweaver, the Spry css styles are arranged with little or no hint as to which style controls what. I found that there is a rule in the sub-menu styles that controls the little graphic arrows which indicate that there are dropdown subs under the tabs. I had removed these arrows to make way for my background images. However, the rules that control their positioning by percentage were still there, causing my images to display incorrectly. Of course, there was no way anyone could have spotted this and helped me as the fault was in the external spry css file, not the page code. So many thanks to vw2ureg for looking anyway. Regarding the page code, which you have flagged up, would you mind elaborating on what you see wrong here? I'm none the wiser. Many thanks again.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

REMOTE app on iPhone does not display Cover Art

I use the Apple REMOTE App on my iPhone to control my iTunes music library on a Mac. The REMOTE App controls the iTunes playback properly. However, the Cover Art for each song does not display on the "song" screen - showing the song currently playing. Across my iPhone screen (where the Cover Art should appear) are the words containing album of the song). The name of the song and album correctly appear at the top of the screen.
What is interesting is that when I hit the back arrow (left side top on song screen), all of the Cover Art appears in small thumbnails. The Cover Art also appears in other displays (for example, the currently-playing Album) using REMOTE on my iPhone. This means that the cover art is being transmitted to my iPhone - HOWEVER IT DOES NOT DISPLAY ON THE SONG SCREEN.
Can anyone kindly help me resolve this - because I would really like the Cover Art to display properly on the song screen. Thank you. Dale

Nezmo, This is really unbelievable. I have suffered from the issue I described for SEVERAL YEARS. Today, for some reason I decided to make this post on the Apple discussion board. And, today the issue was fixed by Apple. I just downloaded the update to the REMOTE app and the cover art now shows beautifully on my iPhone 6 plus. Thanks. Dale

CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul L

Kurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase.

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

SMS text message header does not display sender information

When I receive a text message the only header information that displays is the date and time. The senders information does not display. The lines are not even there. There is no way to reply to a text message or tell who the sender is. This problem is only with SMS messages. Regular email headers display just fine. I have done a wipe, reset, reload, everything possible with no luck. I am the only one in my office with this problem. I have not been able to find any information or postings from anyone having the same problem. I can read the text message, but there is no header (except for the date and time). Any thoughts?
Blackberry Curve 8350i

I was able to resolve the problem by uninstalling the Blackberry desktop manager software and reinstalling it selecting Internet Email vs. Blackberry Enterprise Server. If you get to the screen that asks you to choose which type of email service you use and you accidentally choose the wrong one your phone will work but will do strange things, including sending all sorts of redirect emails. For me, this seemed to do the trick.

Dial pad does not display

Similar Messages

Maybe you are looking for