Dial-up connection between Asterik SIP server and Cisco 5400

Hi,
We have a setup for dial-up. The incoming call lands on Cisco 5400 and is forward to PGW using mgcp intergration. PGW sends it to Asterik SIP server over SIP. This Asterik Server sends it to another Cisco 5400 over SIP for Internet.
The issue is for some dial-up user, it works fine. But for some it doesn't. The problem is when we see the log on the last Cisco 5400, the incoming call tone is detected as FAX tone rather then Modem tone.
Any idea why is it so??

Similar Messages

Help Needed in establishing connection between Kepware OPC server and UDS 4

Hi All,
I am in the process of establishing connection between Kepware OPC server and UDS 4.0,
Can anyone guide me through the process of configuring UDS 4.0 to establish conection with the Kepware.
Any standard documentation on UDS 4.0 will be of great help.
Thanks in advance,
Shyam

HI Rajesh,
I am creating OPC DA instance and when i try to browse for the OPC servers available in the machine, the list is blank. i am not able to view any OPC servers.
Actuallt the Kepware OPC server and UDS are installed in the same machine.
Can you plz through some ligh on this
Regards,
SHyam

Connection between BO Mobile Server and BOE

Hi All,
I have installed BO Mobile on the same machine which as Business Objects Enterprise.
Have the following questions
1. How the mobile server connect to the enterprise server? Let me know what are the steps needs to be done for the connection between the mobile server and enterprise.
2. How the connection between mobile server and proxy server
I gone through the installation and deployment guide of businessobjects mobile but it not clearer to me.
Kindly, help me out.
Thanks and Regards,
Yuvaraj.

Hello,
I have a similar scenario to that you have described, in order to test;
BOE and BO Mobi deployed on the same machine, no proxy. I am also using a BB simulator in order to test connecting.
I have installed the client s/w to the simulator device, but am unable to connect to BOE from the device.
Below is the info from each of the config files and device.
Can you tell me if there is a needed change?
1. VMS
$Id: server.config 28982 2008-01-03 21:52:21Z hmak $
config for VMS Server instance
VERSION = 6.0
[server]
SERVER_ID=VMS_SERVER
[comm]
BINDTO_PORT=11711
MANAGEMENT_PORT=11712
EXTERNAL_HOSTNAME=<BOE machine Name>
common across all VMS servers
INCLUDE_CONFIG_FILE = config/cluster.config
vim:noet
2. VAS:
$Id: server.config 27498 2007-10-01 19:12:19Z hmak $
config for Authentication Server (VAS) instance
VERSION = 6.0
[server]
SERVER_ID=AUTH_SERVER
[comm]
BINDTO_PORT = 11011
MANAGEMENT_PORT = 11012
EXTERNAL_HOSTNAME=<BOE machine Name>
common across all auth servers
INCLUDE_CONFIG_FILE = config/cluster.config
vim:noet
3. Handheld Connection Settings:
Mobile Server: <server IP Address>
Port Number: 11011
CMS Name: <BOE machine Name>
Auth Method: Enterprise

SIP trunking between Microsoft OCS server and Cisco Voice GW router.

Hello All,
I have a client with an existing Microsoft OCS (office communications server) environment with the OCS server in their head office. The OCS clients in the remote Office registers with the OCS server in the head office. The WAN connectivity between the remote office and the Head office is MPLS.I would like to facilitate local call (PSTN) features at the remote site through a newly proposed Voice gateway router.
Can I achieve this by doing a SIP trunk between the OCS server in the head office to the newly proposed voice GW router in the remote office through the existing MPLS link. If yes, Could any one please assist me in this regards or suggest any other best solution to achieve the same.
Thank you in advance,
Mohammed Ameen R

Hi David,
this is a normal behaviour. To CUCM, OCS is a remote destination (just like your mobile phone). When your mobile phone hangs up, the system will put the call on hold for 10 sec.
This is there for the mobile user to go to his desk to pick up the call and continue the conversation (part of single number reach feature)
The best practise will be for the user to ensure that the other party hangs up the call first before he hang up.
Please grade if you think it's useful =)

Connection between oracle 9i server and oracle 9i client

hi there,
i have installed both oracle 9i server and oracle 9i client in my system.how can i connect these two to have connection between these server and client?
Because i was using only 9i server for creating database and for other purposes.i have not used 9i client yet.
Please write me the answer.
Thanks in advance.

Hi Balu,
If you have the Oracle 9i Client, you can just edit your TNSNAMES.ora file of your client to have a TNS Entry for your new Database & try connecting it. You just need to try TNSPING & ensure that you can reach the Listener.
Are you facing any specific problems ?
Regards,
Sandeep

Connection between portal (KM system) and external server.

Hello All,
I need to establish connection between portal (KM system) and external server. At external server, IIS and WebDAV are configured.
So for this reason, I have created an HTTP system and a webDAV repository manager at portal, but not able to connect to the external system.
I have created a webDAV template, but not able see it under KM systems to create a webDAV system, I have even restarted the portal, still no use
Please suggest, any prerequisites need to be done?
Thanks
sk

Hello Supraja.
Yes, ofcourse i already followed the doc.... In the 20th page of the doc, it is said the portal needs to be started, for the WebDAV template to be seen. to go head and creat a WebDAV system under KM systems.
But even after restarting the portal, I cant find the already created WebDAV template. Any guess to reslove it...
A quick response it appreciated.
regards-
sk

Connection between CRM back end and ASP front end website for Ecommerce

Hi All,
I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
Can anyone please help me out.
Thank you,

Okay here is the general concept for your scenario:
-You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application.
-You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
-You decide what data you want to use from CRM in your application
Let's assume at minimum you will want to use the product master, business partner master, and business transactions. You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM. This is example of how you need to map out each function in your existing site to a part of the CRM system. Since we don't know what your site currently does, this is something you would have to do.
Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call. Once that is done, then you can look at the CRM system and see what standard pieces can be called. Then everything else is custom development. Your ASP application will call CRM via RFC.
It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces. I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem. It just depends on how much special functionality your existing e-commerce site has today.
My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues. An on-site resource could better answer your "high-level" questions.
However if you have more questions please ask and I will try to answer to the best of my knowledge.
Good luck,
Stephen

Regarding connection between front end HTML and back end SQL 7.0

Hi!!
I am working on the project 'ERM'. I have designed 12 forms using HTML. Can u please give me brief idea how to establish the connection between a back end and front end i.e. between HTML and SQL 7.0. If possible can u provide me the source code for the same.
I will be very thankful to you.
Thanks,
Jigar.

Read up about multi-tier applications.
You need servlet and JSPs for the server-side presentation layer, some classes for the business logic, and some mor for the persistence layer either using JDBC or some framework like Hibernate.

Problem to connect between Oracle 10g xe and VB2010 at Vista sp2

Introduction
Hi guys, good day... NEED RESCUE!! SOS!! Hmm.. i have trouble been 1 weeks trying connect between Oracle 10g xe and VB2010 on window vista sp2. Actaully im very new at Oracle 10g xe and VB2010 but i got a project is going to build up system database and i figure out Oracle 10g xe and VB2010 can use free so i just chows these appication to be my project. I been search around internet and there is several things i was found about the connection but i has try and tried still it wont work out.
Things i found and learned
Oracle
1. I have download Oracle 10g XE and installed in my windows vista sp2.
2. I notice the Oracle Developer Tools is needed for VB2010 (To add reference 'Oracle.DataAccess'). So i was downloaded ODT11beta and installed
3. I also edit TNSNAMES to following below:
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
4. My sqlnet like following below:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
5.I have try tnsping OraDB and its works.
6. I monitoring task manager and OracleServicesXE is running.
7. ora_dba is added in Group.
Problem in SQLPLUS
When i try connect SQLPLUS in cmd i get ERROR: ORA-12560: TNS:protocol adapter error.
i . In cmd i type sqlplus and enter then i been ask for username and password.
ii. After i insert my username and password and enter then i get the error of ORA-12560.
Visual Basic 2010
1. First i created my project, drawing label and button for test connection.
2. Then, i add reference Oracle.DataAccess into my project.
3. I type following script into my vb form:
Imports System.Data
Imports Oracle.DataAccess.Client
Imports Oracle.DataAccess.Types
Public Class Logon
Private Sub cmdLogon_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdLogon.Click
Dim oradb As String = "Data Source = OraDb; User Id = system; Password = shin;"
Dim conn As New OracleConnection(oradb)
conn.Open()
Dim cmd As New OracleCommand
cmd.Connection = conn
cmd.CommandText = "select SName from Staff where SName = shin"
cmd.CommandType = CommandType.Text
Dim dr As OracleDataReader = cmd.ExecuteReader()
dr.Read()
lblOra.Text = dr.Item("SName")
conn.Dispose()
End Sub
End Class
Problem in VB2010
When i run my project and press the button i get error message ORA-12514: TNS:could not resolve the connect identifier specified at conn.Open()
Extra Question*
1. Im notice in my netbook xp home sp2, before i install ODT11beta my sqlplus look fine thought cmd but after i installed ODT11beta its same problem with my Vista sp2 now. Get error ORA-12560: TNS:protocol adapter error :( I tried uninstall ODT11beta again and restart its work fine again. Which i really dun understand. Izzit the version ODT11 is not suitable for 10g xe? And i dunno this problem is related with my connection between oracle 10g xe and vb2010 or not. So confuse@@
2. I wish to know more about connect between Oracle and VB, is there still a things i miss?(I mean steps or configuration that should i done)
3. Or i just lower my VB version could make more easy? If yes, what version VB should i use that could work out with oracle 10g xe?
4. Sorry for too bad my english but i really wish somebody could help me. Please try to understand my written or you could ask me mean if dont understand. Im stuck!! Stuck feel not really that good.....
Edited by: user9173084 on Jul 19, 2010 3:34 AM

Huhu..
Yo, henry
I thought the OraDb is just a name for entry but im not sure it is a service. I was refer http://www.oracle.com/technology/pub/articles/cook-vs08.html at topic Connection Strings and Objects.
Here is my lsnrctl service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 state:ready
DISPATCHER <machine: SHIN-PC, pid: 1932>
(ADDRESS=(PROTOCOL=tcp)(HOST=shin-pc)(PORT=49158))
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "xe" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Izzit ok? I notice there is no listed OraDb. but tnsping OraDb seem fine.
Actually there is somethings as a newbie i wondering long time alreadly ><
1. The origin of tnsname.ora is no OraDb or ORCL but i just simple add it by open tnsname.ora with notepad. Im just not sure it is function or not.
Also please check at my TNSNAME.ORA:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
I got the feeling there is so close~~~!!!

Add a real HSS connection to BEA sip server 3.1

Hi, I have a real HSS configed alrdy and wanna make the sip server can connect to that HSS? How do i do it?

As the Product Manager for the Oracle Communications Converged Application server (the former BEA WebLogic SIP server) and the former product manager for the Sailfin (I was PM for the Sailfin product before I left Ericsson to work for BEA) I must say that the Oracle product is absolutely superior, both in terms of quality and design, to any other competing product. I can also say that Oracle is fully behind this technology. Remeber that in the long run the issue is not "cost", but "value". Open source software is generally free for a reason.

How to connect j2me to sip server

Hi friends ...
I am new to this topic and i just want to know how to connect a real sip server with the j2me application .
I tried using the GoSIP demo given in wtk2.5 . its working fine with local SIP proxy and registrar given in that .
But i want to connect to a real SIP Server. Even i have a registered sip number.
Can any one please help me how to sort out this problem as i am very new to this topic. Is there any source given for this ??? If so please tell me ...
Thanks in advance ......

is it possible to make
voice calls from the GoSIP example given in the
wtk2.5 demo examples ?
Probably not. Have you tried?
I have a sip account and i just want to know how to
register my sip account with the sip server using a
j2me application .
Change the SipHeader and / or SipAddress
What are the changes to be made in the GoSIP example
to connect to a real sip server and not to the sip
proxy server
See above
and what are the syntax to be changed
in it ????
Syntax is a property of the programming language, not the application.
And one question mark is enough to pose a question, 4 is overkill and perceived as rudeness.
Please help me in solving out this problem ....
What have you done to help yourself?
Read the javadoc for jsr-180
http://www.forum.nokia.com/document/Java_ME_Developers_Library_v2/GUID-2508C2ED-C0BE-4512-9302-6805AB7ACB0E/index.html
Introduction to the SIP API for Java ME
http://dev2dev.bea.com/lpt/a/565
A presentation on the architecture and capabilites of SIP
http://phoenix.labri.fr/documentation/sip/Documentation/Papers/Programming_SIP/Presentation/Jain/SIP_for_J2ME.pdf
Thanks in advance ....
If you're looking to solve a need by cut-n-paste programming sans understanding, you're unlikely to get it here.
Increase your level of understanding, experiment with your codes and post back when you have a specific issue.
Good luck, Darryl

There is a compatibility range mismatch between the Web server and database

HI,
Taken backup form production environment through TSM backup utility and restore same db on UAT environment by TSM Utility, after restore got below issue, past i had done many time but working fine this time
it’s not working. Production environment have SP2010 and sql server 2008 ,UAT have same thing also.
Server Error in '/' Application.
There is a
compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can
happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and
build level to return to compatibility range.
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException:
There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within
the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack
trace below.
Stack Trace:
[SPUpgradeCompatibilityException: There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been
blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the
database must be upgraded to the same version and build level to return to compatibility range.]
   Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility() +542
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +63
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +258
   Microsoft.SharePoint.WebControls.SPControl.EnsureSPWebRequest(SPWeb web) +365
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +520
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) +27
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) +918
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Bhavik,
UAT Portal_Contain DB version given below:
Version ID
Version
id
00000000-0000-0000-0000-000000000000
12.0.0.4518
1
00000000-0000-0000-0000-000000000000
12.0.0.6219
3
00000000-0000-0000-0000-000000000000
12.0.0.6327
4
00000000-0000-0000-0000-000000000000
12.0.0.6421
5
00000000-0000-0000-0000-000000000000
12.0.0.6510
6
00000000-0000-0000-0000-000000000000
12.0.0.6514
7
00000000-0000-0000-0000-000000000000
14.0.6123.5006
9
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
8
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
2
Production Version given below:
00000000-0000-0000-0000-000000000000
12.0.0.4518
00000000-0000-0000-0000-000000000000
12.0.0.6219
00000000-0000-0000-0000-000000000000
12.0.0.6327
00000000-0000-0000-0000-000000000000
12.0.0.6421
00000000-0000-0000-0000-000000000000
12.0.0.6510
00000000-0000-0000-0000-000000000000
12.0.0.6514
00000000-0000-0000-0000-000000000000
14.0.6123.5006
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
I have matched both are the exact same.
Run the below command on App server:
Upgrade-SPContentDatabase
cmdlet Upgrade-SPContentDatabase at command pipeline position 1
Supply values for the following parameters:
Identity: Portal_Contain
Confirm
Are you sure you want to perform this action?
Performing operation "Upgrade-SPContentDatabase" on Target "Portal_Contain".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help
(default is "Y"):y
WARNING: Database [SPContentDatabase Name=Portal_Contain] cannot be upgraded.
Kindly suggest
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

I lost the connection between my MacBook Air and Bluetooth wireless speakers (Logitech) when updating to OS 10.7.4. Tried all the "fixes" I could find, no results!

I lost the connection between my MacBook Air and Bluetooth wireless speakers (Logitech) when updating to OS 10.7.4. Tried all the "fixes" I could find, no results! Can you help?

Error message as above and below:
'Send Message Error
The message could not be sent because connecting to SMTP server mail.btinternet.com failed.
The server may be unavailable or is refusing SMTP connections.' (etc.)
BT won't deal with this - they redirect me to a 'partner' who want to charge to discuss the problem. Nice, eh!

Establish connection between existing IAS6.5 and newly installed S1WS6.1

Does anybody know how I can establish connection between iPlanet app server 6.5 and Sun One web server 6.1? I have an existing IAS6.1 and I've just installed web server 6.1. Can this be handled by installing a web connector plug in?

Does anybody know how I can establish connection between iPlanet app server 6.5 and Sun One web server 6.1? I have an existing IAS6.1 and I've just installed web server 6.1. Can this be handled by installing a web connector plug in?

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

Dial-up connection between Asterik SIP server and Cisco 5400

Similar Messages

Maybe you are looking for