Dial-up external modem for G5

i've got a brand new G5 2.5 Quad, sitting un-opened while i wait for the back-ordered modem (Apple MAO34Z/A) that I've been told is the only way I can get the G5 online via dial-up connection.
Is there any other way to do it? like maybe connect the G5 to my G4 and use the G4's internal (dial-up) modem?
Thanks.
G4 450 AGP Graphics Mac OS X (10.3.9) new G5 2.5 quad &OS X4

There is more here
http://docs.info.apple.com/article.html?artnum=106796

Similar Messages

External modem for MacBook Pro

We are going on vacation to a remote location - no wifi available. It was suggested that I purchase the Apple MA034Z/A external modem for a dial up connection. After reading user reports of this not working with Intel does anyone have any suggestions? I see that Apple no longer makes/sells this product but that it is available from other sources. I am very new to all this - any assistance is appreciated.

It works fine.

APPLES EXTERNAL MODEM FOR IMAC G5 PPC

BOUGHT THE APPLE EXTERNAL MODEM BUT NEVER GET MORE THAN 3200 BPS.WHERE AS MY IMAC DVD WITH BUILT IN MODEM GETS 4800

Open System Preferences and check all your settings,
you can do better.
AND DO WHAT? I HAVE TRIED THAT STILL SAME RESULTS

Dial up usb modem for mavericks?

Mavericks clearly indicates that it works with dial up but I have been unable to find a modem that does not stop loading pages after a minute or two. The US Robotics 5637 modem that I was using for 10.6,7 and 8 will log on to the server and start downloading pages but then stops. It does not drop the connection, the pages just stop loading. A few pages it will load but something like Facebook is impossible. I monitor the connections via Little Snitch. I have a MBP that I was using and a Mini that I just purchased. After upgrading to 10.9.3 the MBP will not finish loading pages on dial up and the Mini, a clean install, will not either. I have done all the upgrades recommended bu US Robotics. US Robotics says the modem works with Mavericks. Apple support has been no help and declines to tell me what modems might actually work, refers me back to US Robotics and tells me to search the forums. I have followed all their troubleshooting and installation recommendations. Personally, I think it is OS 10.9 and not the modem but what do I know. Apple is not interested in solving the problem even though I am within the 90 day support window. I am outside of the US now and have no alternative to dial up internet access. Can anyone help me? Right now I am using a 10 years old Dell Latitude to access the internet and have no problems. After spending close to $2,000 on the Mini and peripherals I'd like to be able to use it. I'm pretty disgusted with Apple not being helpful on this. They have offered no alternatives other than to find someone other than them to figure it out.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$ \$.+\$/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Finding a dial-up FAX modem for iMac Intel Core Duo

I know that Apple has its own modem with USB dongle, but I've also heard that this modem may have some peculiar problems.
How can I find (conveniently) other V.90 or V.92 FAX modems which are supported on the iMac and in OS 10.4.7 Tiger?
Anyone have any comments -- positive or negative -- about any modems -- Apple, US Robotics, Global Village, other?
Thanks
Jerry
P.S. I primarily want the modem to be able to send and receive FAXes with the iMac.

Hello,
I have always preferred US Robotics modems. But, you are going to find your options a bit limited these days.
The problem is that most manufacturers are no-longer producing drivers for the newer Mac OS versions. So, you would need to locate a modem who's driver is already integrated / built-into OS X.
Fortunately, the drivers are provided for a large number of modems out there. But, you won't necessarily get any support from their manufacturer since the drivers in OS X are provided by Apple.
That said, I would personally go with either a US Robotics modem (since that would be a very established standard and the drivers are supplied by Apple in OS X).
But, if you are not comfortable purchasing a modem that does not come with Apple drivers in the box for OS X 10.4.7, then you really should just buy the modem from Apple so that you know it is supported by the current version of OS X.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

Sond control for external modem when faxing

Does anyone know of a way to turn off the sound when using an Apple external modem for faxing? Oddly, my sound output is set for USB speakers which are off. I have the system volume turned all the way down. Yet when sending or receiving a fax, the initial dial tone sings out loud and clear.
Thanks in advance,
Gary

I believe the Pagesender string is the default to start at 14,400 baud and auto-negotiate down to 9600, 4800, etc until communication can be established. Hardware error correction is typically off being controlled only by the software.
Fax machines will automatically negotiate to 9600 if they cannot establish a faster rate.
Most VoIP services tell you that a special line is required for faxing, and that you cannot fax over the standard voice line. Cannot tell you more than this.
The Apple modem uses standard Motorola modem commands. If you can find an old document for a typical Motorola modem then you will find the AT commands.
Message was edited by: Kappy

Can I use my iPhone as a fax modem for my MBP?

If I don't want to buy an external modem, can I use my iPhone as as fax modem using bluetooth or USB connection

yes you have to use an external modem for this purpose

Snow ABS as wired external modem?

My Aunt bought has need of an external modem for her new modem-less Mac Mini (her broadband options are not working out).
I have an opportunity to get an old Snow ABS that I figured I could connect via Ethernet. It has had its wireless card removed however and I'm not sure if this renders the whole unit inoperative or not.
Does anyone know if the modem would still function without the card in the base station?

Why don't you try using it? I hope it does work. It should since it is a wired router as well as a wireless.

Can I use iphone as external USB analog modem for dialing into switches?

Can I use iphone as external USB analog modem for accessing data switches?
I want to use hyperterminal but don't have a land line to use and wanted to use my iphone as my hard land line..this isn't for tethering for internet access...make sense?

apple store sale guy said this set up will work but it did not. just bought my TC last monday.

Need a dial up modem for G3 Beige Tower

I have an ethernet card for my G3 Beige Tower but I need a dial up modem so I can hook it up for my mom. Anyone know where I can get one? Milwaukee

The internal 56K Apple/GV modem card that was a Build-to-Order option for the beige G3s offers the convenience of no additional desktop clutter, no extra power supply to bother with, and nothing to turn ON/OFF. It plugs into the brown slot on the audio or A/V personality card. You can see one listed on this page, but the $99.77 price tag is absurd, in spite of its scarcity now. When I stopped buying them a few years ago, used ones could be purchased for about $35. The internal 56K modem card functioned identically as its external Global Village 56K counterpart. If you have the time to keep checking eBay, you may find an internal Apple/GV 56K card eventually show up for auction. Just be sure that it matches the photo shown on the page I linked. Some sellers (mistakenly or not) identify the software-based "Apple GeoPort" modem card as the 56K modem card - which it definitely isn't. For a reliable 56K external modem, the US Robotics 56K v.90/x2 (model 5689-03) was always my choice for the internet and downloads. The Global Village TelePort 56K v.90 external modems with attached modem cable are also a good choice for the beige G3s. These modems are discontinued, but you can find them showing up at eBay or thrift stores. The current US Robotics v.92 external modem (black color and marketed for PCs) can be used with your beige, but (as Jan wrote) you'll need to find a Mac modem cable (DB-25 to mini-DIN8) for it. Additionally, a custom INIT string must be used to disable a couple of unsupported v.92 features, in order for it to function properly. After much trial and error, I arrived at one that did the trick.

Dial up Connection using External Modem in Solaris Intel Version

Hi
How to Install a modem in Solaris 7 Intel version and how to make a Dial Up Connection Using this external Modem.
Can any one Help me....
send your reply to [email protected]
Thanks in Advance ....
Vinod.

hello
i'm fond that inside the folder /etc you have another one called /ppp and inside the folder /ppp you have some files that you have to edit in orther to configure your user name and password, but everything is explained on that files, and is bether that you reed then
then in the console you have to type pppd ttya (if your modem is conected to the Com1) call myisp
were myisp is one of the files that you have to configure, but how i'm told you everyting is splained on that files
If you dont have it please install the 2 Cd
the only thing that i'm can't configure was diseble the "wait for dial tone" and in order of that i'm not able to conect to the internet, if you now someting aoubt that please send a e-mail to [email protected]
tanks

10.5.2 and Apple External Modem Dialup - computer freezes when dialing up

Hi,
Many thanks in advance for your attention.
Since upgrading to OS 10.5.2, the computer freezes (the cursor freezes) each time I try to dial up to internet. The only way to unlock computer is to shut the power button off and start over.
I am using the Apple External Modem.
Had no problems before (10.5.1, 10.5, Tiger, etc.). So far I seemingly have no problems with any other app. Only when I try to connect (dialup) to the internet.
I did the usual repair and verify permissions before and after installation.
I did a repair and verify Disc (from the Install Disc) after these problems.
Both reported no problems.
I also tried trashing Internet Connect prefs files in Home Library.
I see a lot of posts and looks for Wireless connection problems.
The only dialup solution I've read so far are people who went back to 10.5.1.
- Ross

Ross Corsair wrote:
Hi,
Found this as a suggestion on how to fix the 10.5.2 internet dialup problem, but it is so vaguely written, I have no idea what the tipster is talking about.
I assume the tipster means one types these commands in Terminal?
If someone can explain the following in English, I would be grateful.
I had problems sharing a dial-up (Modem) PPP connection. I want to use NAT for security reasons and found that only the first connection after reboot worked. Subsequent connects would fail due to NATD not rebinding the new PPP bindings. Restarting NATD fixed the problem. Luckily PPPD fires off some scripts in /etc/ppp depending on connection status. The following script restarts NATD after every successfull connect if you save it as /etc/ppp/ip-up (don't forget to make it executable):
#!/bin/sh -
N_P=`ps -uxc -U root | grep ' natd$' | awk '{ print $2 }'`
if [ "$N_P" != "" ]; then
logger -i -t $0 "Sending SIGHUP to natd (PID $N_P)"
kill -HUP $N_P
fi
Yes, this meant to be run in the terminal.
Really, the poster expected that these commands would be saved in a sh script and executed that way.
Create a txt file and past those commands into it. It will need to be saved with execution permissions.
What does it do?
N_P=`ps -uxc -U root | grep ' natd$' | awk '{ print $2 }'`
This asks the system for a list of running processes (ps -uxc) where the user is root (system admin) and passes this list to grep (which filters the list looking for a process with the string 'natd$'. This passes a single line out of the process list to awk which simply prints the second item in the list.
The end result is that the procid (process id) for the natd process is stored in the variable N_P.
Next -
if [ "$N_P" != "" ]; then
logger -i -t $0 "Sending SIGHUP to natd (PID $N_P)"
kill -HUP $N_P
fi
This checks whether a natd process was found - $N_P not null string.
If a process was found - the logger command writes and entry to the system log and then the script tries to kill the process gently (kill -HUP).
This should clear the natd process which should restart if you try and dial again.
The script is not really vague - just needs a comment or two to make it understandable to those who are not Unix geeks.

Modem settings for Apple external modem

I'm not certain if my terminology is correct, but is there a way to set the packet size (MTU?) for sent transmissions for an Apple external modem? Specifically, I'd like to see what mine is set for, and change the values to perform some tests. I've seen posts where the MTU cannot exceed 1492 bytes with some ISP's or data is fragmented. My specific problem is that I am unable to send attachments larger than about 50KB from Leopard's Mail app (3.2), although I can send attachments with no problem from Tiger. Text messages are no problem. Thanks in advance for advise.

Thanks a lot for answering.
I believe the modem is working. I can hear it dial, hear the handshake and apparent connection. The modem status display shows "Connecting" then "Authenticating" and eventually "Disconnecting". I get an Internet Connect report that "Authentication Failed". I have verified that my Account Name and Password are correct, by logging on to the Road Runner Web Mail site. I went through that in detail with their tech support.
How can I disable v.92 in OS X 10.5.6? I tried disabling error control and data compression, but that seemed to have no effect. What about these settings:
Send PPP echo packets
Use verbose logging
Use TCP header compression
Would any of those PPP settings have an effect on Authentication?
So far, the only way I have been able to connect and log in by dialup is with a PowerBook G3 (Wallstreet) in OS 9 with a PC card modem. My normal connection is a cable modem and that's no problem, but I wanted to test dialup as a backup. Now, it's a challenge.
Thanks again for your help.
Message was edited by: Dick Chanslor

Pearl 9100 OS 6 Dial-Up Networking DUN (How can this be done with Telstra) Wireless Modem for Mac

Hi
I would like to know how i can have dial-up networking (Using my Pearl 9100 OS 6 as a wireless modem for my Macbook Pro 6.2) and also the information that has to be applied for Telstra Australia..
Thankyou
Solved!
Go to Solution.

Hi and Welcome to the Community!
Refer:
KB19641 How to Configure a BlackBerry smartphone as a tethered modem on a Mac
Note carefully please that this feature requires your service plan to include the capability...not all service plan levels include it, and not all carriers offer it. Further, sometimes additional software for your computer must be obtained from the carrier. But, any and all carrier-specific questions about this must be addressed to the carrier...here, we can only give you the generic information...your carrier must provide you with any specific information required.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Using Apple external modem to dial up UNIX

New to Mac, and for work I need to dial into our modem on UNIX computers. I can get the connection with Zterm, however I'm getting giburish back and can't seem to change the setting properly to get a Username and subsequent Password prompt back from UNIX. Then I expect to stay connected and work on the command line.
Previously I had Windows and used HyperTerminal to get me into the UNIX machines.
anyone familar with this?
Thanks!!!

I can dial out, get connected - all via Zterm; i just get a lot of gibberish back from the UNIX computer, instead of being English and prompting me for username and password.
Some setting is still off. I have sent an email to Zterm author.

Dial-up external modem for G5

Similar Messages

Maybe you are looking for