Dial-up for checking emails doesn't disconnect after checking

Hi, is there a way to ask the Treo to disconnect once it has dialed up to check for messages? I am getting a hefty data bill as it checks in the middle of the night and does not disconnect unless i ask it to.
Post relates to: Treo 700wx (Verizon)

Thanks. I ended up taking my PC to my daughter's - she's on high speed - and I downloaded the updated versions of everything I needed. My Dial-up is too slow (26.4 kbps YIKES!) to do that... bummer. So guess I'll just have to bring my PC to town periodically to do updates.

Similar Messages

Incoming email doesn't work after changing to iCloud

After changing to iCloud, my email cannot receive mail any more, but I can still send.

Hello,
I understand, we need to know what version of Mac OS X your PowerBook is running in order to assist you.
If you don't know you can go to the Apple logo on the top left and click 'About This Mac'
It will tell you what Mac version your PowerBook is running, for example Mac OS X 10.4
When you say emails icon, do you also mean the 'Mail' that has the icon as a stamp?

Outbound call doesn't disconnect after call end

Have you ever seen something like it:
I make a call from my ip phone (3911 or 6921) to an external phone (ex: cell phone: 084645727) and the call works fine, but when cell phone turned off the call, on my ip phone the call still connected, ip phone show me on display that the call still active, the call is just disconnect when I put the phone onhook.
I use CUCMBE: 7.1.3(SU2)
Cisco 2821 : c2800nm-spservicesk9-mz.124-20.T4.bin
debug vpm signal
BHEGV1#R2 Got Event R2_ALERTING
*Nov 25 07:42:36: show voice call status
CallID     CID ccVdb      Port             DSP/Ch Called #   Codec    Dial-peers
0xD8803    20E8 0x48177B78 0/1/0:0.3        0/1:1 *2125463737 g711ulaw 7500/40
0xD8847    1C9D 0x48177B78 0/1/0:0.1        0/1:3   7434       g711ulaw 1/7500
0xD88B2    26E8 0x48177B78 0/1/0:0.28       0/1:5 *087068998 g711ulaw 7500/30
0xD88B6    27E8 0x48177B78 0/1/0:0.27       0/1:2 *084645727 g711ulaw 7500/30 (it is my call)
0xD88BD    1D22 0x48177B78 0/1/0:0.2        0/1:4   7491       None      1/7500
0xD88C0    28E8 0x48177B78 0/1/0:0.22       0/1:6 *084743874 g711ulaw 7500/30
After cell phone turned off the call, the debug vpm signal just show me it:
*Nov 25 07:42:50: htsp_process_event: [0/1/0:0(27), R2_Q421_OG_ANSWER, E_DSP_SIG_1100]
Does anybody could help me !
Regards.

Hi All
I had this issue with Oi and EBT, not sure if this is the same, but i had an issue where the Voice channel in clearfwd - I was facing the Bug CSCtd74470, there a workaround but the upgrade of the GW to Version 15 works properly, the output of the "sh vo po sum | include clearfwd" will confirm if this is your case.
Also in others situations I solved my issue applying the command timeouts call-disconect 3, under E1 Port
Please rate this post
Cheers
Bruno Rangel
"Se você quiser alguém em quem confiar, confie em si mesmo. Quem acredita sempre alcança"
Renato Russo

New Icloud Terms and Conditions window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months.

'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.

Hi munaxnight,
If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

I forgot the password for the apple store, I try to restore it with the first option (email) but i have check my account and the email doesn`t arrive

I forgot the password for the apple store, I try to restore it with the first option (email) but i have check my account and the email doesn`t arrive
What can I do???

Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

Yahoo Email and Calendar will sync to my iPhone, but Contacts will not. Selection for "Default Account" doesn't even show in the Contacts section within Settings on the iPhone.

I have always had my Yahoo Email, Calendar and Contacts synched to my iPhone. However, I noticed some Contacts weren't synching from the Yahoo account to my iPhone, so I thought if I just deleted the Yahoo account and added it back, I'd be fine. That worked fine for my Email and Calendar, but now I have NO Contacts from Yahoo on my iPhone. When I go to Settings, under Contacts, it doesn't even have the option for 'Default Account.' Help!

Hello Marsha,
Thanks for using Apple Support Communities.
It's not clear exactly what you're trying to accomplish here. If you're wanting to set up SMS forwarding introduced in iOS 8, then please follow the directions below. Also, your Apple ID should be an email address.
To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
On your iPhone:
Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Take care,
Alex H.

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

User exit or a badi for checking the vendor email id in me22n on me29n

hi all,
can anybody suggest me a user exit or a badi for checking the email id of the vendor in me21n or me22n or me29n.
i.e. a user exit or a BADI which gets hit either at the time of creation or release of a purchase order.
plz suggest me a solution its urgent.
regards,
santosh

Hi Santosh,
Have you looked BADI ME_PROCESS_PO_CUST or user exits EXIT_SAPMM06E_016 / EXIT_SAPMM06E_017?
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Why when I use personal hotspot at my iPad mini retina for my iPhone it doesn't stay for long,it disconnect after 5minute

Please...
Why when I use personal hotspot at my iPad mini retina for my iPhone it doesn't stay for long,it disconnect after 5minute

Assuming you are using OSX, connect iphone ny usb then go to system preferences. Go to network pane and scroll down to "wheel" and from the drop down select service order. If you see the iphone then drag it to the top of the list then select apply.

Why is Mail asking me for the name of an smtp server for an email address that doesn't exist?

I've migrated from Snow Leopard to Mountain Lion on a new Mac, but in trying to use Mail on ML, it keeps asking me for the name of an smtp server for an email address that's never existed. The addy has my user name correct, but the server part of the address doesn't exist, or at least I've never used an email address with that provider. On ML there's no plist file for Mail, so nothing to delete there. What else can I do to get Mail working? The only other option I have is to abandon Mail as being crippled and useless, and use Postbox, which for it's price (US$9.95) is an attractive option. OTOH, I've paid for Mail after all, so it really ought to work. Any clues as to what I can do to stop its nonsensical behaviour? How do I file a bug report?
TIA.
Pauline

Amasis wrote:
On ML there's no plist file for Mail, so nothing to delete there.
~/Library/Containers/com.apple.mail/Container.plist
(Go to your Finder "Go" menu hold the option key to choose "Library", since the ~/Library is hidden on ML)

I was receiving and sending my emails perfectly, now nothing gets downloaded? It checks for new emails but do not find anything and I know there is. Please help

I was receiving and sending my emails perfectly, now nothing gets downloaded? It checks for new emails but do not find anything and I know there is. Please help

Oh, the irony of referring to yourself as "myklthebrain". Make an appointment, at the nearest Apple store, with an Apple Genius, and hope that (s)he can sort it out.

HT4972 I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

How to use transaction SOST & SCOT for checking Email performance ?

How to use transaction SOST & SCOT for checking Email performance ?
what exactly as CRM Functional we have to do in above transaction .
Please guide me . what is significance of these transaction ?
Regards,
Anup Reche

Hi Anup,
Transaction SOST is used to view the status of the sent mails from SAP.
You cna filter the mails sent by a particular user, on a specified date range and time.
You can list the mails in the status Waiting, Error, Sent or Transmitted.
You can also go to the log of the mail and see its details and can also open the mail sent by the user.
You can add the filters as per your requirement.
Transaction SCOT is SAP Connect used to make connections from SAP to external applications.
You cna configure sending of external mails in SCOT by specifying the SMTP host and port to be used.
Hope this gives you a basic idea of the 2 transactions.
Regards,
Saumya

HT5576 Email sent Check your inbox for an email with instructions on how to reset your security information but i haven't got anytthng in my email

Email sent
Check your inbox for an email with instructions on how to reset your security information
but i haven't get anything in my email

I never got mine either. I ended up scheduling for them to call me to reset my security questions.

How often does my Curve 9300 check for new email messages?

Hello everyone,
I hope that you are all well.
I use a Curve 9300 (3G) and assumed that it checked for and retrieved new emails all of the time. However, it seems that it only retreives new messages from my email account every so often. Could someone please let me know how often it checks for new emails?
Also, when I run a Diagnostic Test in the Mobile Network Options menu the result says NO when it tests to see if it is connected to my email account. When I ran tests a while ago the result was YES. Could someone please let me know if this is anything to worry about?
Many thanks.

First, you have a misunderstanding that the handheld device "checks" for messages. They don't.
RIM's technology on which the company and popularity was built is that RIM servers go out to your email server and checks for new mail and "pushes" those messages to your handheld BlackBerry.
On a normal POP3 email server, that occurs every 15 minutes and if new messages are found they are pushed and the RIM server checks again in 2 minutes for a few cycles, and after 3-4 cycles of two minute checks, if no new messages are found, it reverts to 15 minutes.
On an IMAP email server, the push is instant. An example of this might gmail accounts, yahoo mail, and private domains hosted by GoDaddy.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Dial-up for checking emails doesn't disconnect after checking

Similar Messages

Maybe you are looking for