Dial up internet hookup in Australia

I am travelling to Australia next week. The hotel I am staying in has dial up ... I am wireless....how do I connect while staying there?
G4 PowerPC Mac OS X (10.4.5)

hi ,
access the setup page of the router using http://192.168.1.1 "admin" is the password....go to the wireless section and then to advanced wireless settings.....
turn "off" the AP isolation...reduce the Beacon interval to 50 and reduc the RTS and fragmentation threshold by 40 each....
let me know if this works.

Similar Messages

Dial Up Internet Help!

I seriously hope someone can help me, I'm getting very frustrated. Until 3 weeks ago I was sharing a dial up internet connection (I know but I am rural and it's all that is available, I literally have no other option) printer etc on up to three computers. Desktop running XP and two laptops also running XP. Then out of the blue I lost my wireless signal. My router is a WRT54G. I have literally tried everything. I updated the firmware, the router is working fine it shows up on each computer but they will not communicate. The two laptops see each other but the desktop doesn't see either of them. I know that it has something to do with sharing the internet connection but I don't know what I need to change to get it back. I have literally asked everyone I know, I have searched and searched, I have had two people in the field and they can't figure it out but I KNOW this works I have done it for over 2 years with no problems at all.
I have even tried a new router but that isn't the problem, all the cables work, everything is working except it won't share.
Please someone help! Thanks in advance!

hi ,
access the setup page of the router using http://192.168.1.1 "admin" is the password....go to the wireless section and then to advanced wireless settings.....
turn "off" the AP isolation...reduce the Beacon interval to 50 and reduc the RTS and fragmentation threshold by 40 each....
let me know if this works.

"Call back" dial up internet? Help!

Hello and help! I'm in Ukraine trying to use dial up internet in my apartment. Dial up in Ukraine is done by buying a card that provides you with a pin code that you use to make an account with a third party provider. The time you spend on the itnernet is "pre paid" in essence and when you run out of time
you buy a new card and scratch off a new code.
There are two ways to connect. The first is to dial straight into their server from your computer/phone line (which means you have to pay for the phone time since you're the one who dialed out and this can get expensive). The second option is called "call back." "Call back" meands my computer dials the company then the company dials me right back with an internet connection that I start using. I have been trying to get call back set up for days and
have not succeeded. HELP!
The name of the service I am using is called Superweb (ww.superweb.com.ua/eng). I am trying to dial the 251 1212 number. I am using pulse setting. The error message I'm getting is "Could not negotiate a connection with the remote PPP server. Please verify your settings and try again."
The directions which the company normall gives to PC users are to go into "network" settings, go to "advanced", then "dial up preferences," check off "callback" and then type in the number (not sure if they mean the number I'm calling 215 1212 or my land line number but easy enough to try both).
Please, please help me solve this. Where is the call back option on a mac?
Thanks. I can't wait to hear from you.
More technical details: I have the first generation of the white 12 inch iBooks. I am running Tiger (no updates just original version).

hi ,
access the setup page of the router using http://192.168.1.1 "admin" is the password....go to the wireless section and then to advanced wireless settings.....
turn "off" the AP isolation...reduce the Beacon interval to 50 and reduc the RTS and fragmentation threshold by 40 each....
let me know if this works.

Keychain Access and dial-up Internet connection problem

For the past two days I was unable to connect to my dial-up Internet on my Sawtooth. It's got 10.4.11. The Internet phone connections checked out fine. I even tried my old Dell and it got on the Internet ok.
I checked the Internet settings and thought they were ok. My Internet provider's website help section on set-up is worthless for Mac OS X. They only show instructions for OS 8 & 9!! Found some other dial up providers set-ups and went by them.
After trying to get the settings correct, right before I tried to connect to the 'net, a dialog box called "Confirm Access to Keychain" always came up. The box said: "pppd wants permission to use the "PPP Password" item from your keychain. Do you want to allow this? Deny, Allow Once, or Always Allow?" I had read on the Mac OS X help that allowing the keychain always permission to access to use passwords when going online isn't a good idea... I always kept clicking "Deny" and I couldn't connect. Just got brave a bit ago, and clicked on "Allow Once" and here I am on the Internet!!! This keychain business was the problem the whole time!
My question is how in the world did the Keychain get involved, as I didn't even ask it to save the Internet password etc. The Keychain shows PPP password listed three times and I believe a Dashboard certificate. Would it be ok to delete the three PPP password listed? Was going to, but was afraid I'd really mess up Tiger... I don't want to mess with Keychain at all, since I've read in the past that it can really cause headaches if not used correctly.
Any help would be greatly appreciated! Thanks.
silverado93

Yes, you can delete those PPP entries if you don't mind entering the Password each time you connect, though I'm on dial-up & have Always Allow checked without problems or a decade or so.

Using the mac mini with a dial up internet connection

How do I go about using my mac mini with a dial up internet connection? I am soon to be moving to a rural area and dial up will be my only internet option. Please be very specific in your answer as I am not a very tech savvy fellow. Thank you for your help.

The last time I needed to use dial up I used this amazing device from actiontec:
http://shopping.netsuite.com/s.nl/c.ACCT122499/it.A/id.72/.f
Very hard to find one now, but it has the advantage that it connects to the ethernet ports of up to two computers, rather than using a less reliable usb connection.

Remote Dial-Up Internet

hi,
what's remote dial-up internet? it shows on my bill and charge for $9.99. how can i cancel it?

elst5523183 wrote:
hi,
what's remote dial-up internet? it shows on my bill and charge for $9.99. how can i cancel it?
remote dial up internet, is old traditional internet where you use a 56 k modem. and you can dial up from anywhere that you are at to get email and view webpages.
you would have to call into verizon to have it cancelled. 8005676789

Sharing dial-up internet

i have dial up internet and with with my old G5 iMac i was able to share the internet via airport. Just today i got the new intel iMac. i found were i could share the internet but the only choices on there are the ethernet and firewire. is there any way i could share the dial up internet with the new intel iMac?
thanks

yeah i do have the external usb modem. but i found out how to do it. in the system prefs in the sharing there is the internet sharing check box. before you check it you need to go to the pull down menu and change the "share your internet connection from:" to external modem. then it will work. thanks

Downloading Firefox 4.0 using dial-up internet service

I want to upgrade to Firefox 4.0. I have Earthlink dial-up internet service. Is it possible to download the program and if so how long do you think it would take. Mostly I download programs from discs; it is too difficult to maintain an open internet connection long enough to download a large program. I can't even open a file of photos if someone sends me more than one or two at a time.
Thanks for your help.

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
Firefox 3.0 versions and later require at least Mac OS X 10.4
The last Firefox version that works on OS X 10.3.x is 2.0.0.20.<br />
Mac: https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
Other browsers that you can look at:
* http://caminobrowser.org/download/releases/
* [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/

Cannot connect PowerBook G4 to DIAL-UP internet connection

I have a G4 PowerBook (the very last of the series made) but I cannot get a dial-up internet or e-mail connection. It is so long ago that I used dial-up that I have forgotten the intricacies. Also how do I know WHICH of the several Apple Internal Modems listed, is the one I have in my G4. The names on ABOUT THIS MAC do not correspond with the list I am presented with when I am trying to put in the correct information.
I have never used this G4 for dial-up and am starting to think that perhaps the internal modem is faulty. How can I check if the modem is still functioning properly, please?

Thank you so much for your detailed response. I, too, many years ago used to have Fax STF, though on a separate disc. Even if I had not mislaid the disc (which probably would not now work with OS 10.4.11) surely it would need my internet provider's settings? When I phoned Calcutta on Friday, the lady I spoke to changed some of these, and I am now at sea without them and cannot even get as far as hearing the usual screeching noises.
I did note this recently from an internet site:
With a suitable terminal emulator (something like ZTerm), you should be able to send AT commands directly to the modem. If you type AT followed by Return, the modem should return an OK. Then try ATI (or ATI1, ATI2, ATI3 et cetera) followed by Return; the modem should respond with technical information. If one writes ATDTxxxxxxx (where xxxxxxx is a telephone number) followed by Return, the modem should dial the number (if you have two phone lines, you could check whether the other phone rings).
I now have the promise of another Calcutta helper that she will phone me this evening. The whole object of the exercise is that I will be able to take my second Mac to my husband's house and get a dial-up only connection there which will be better than nothing. He has vascular dementia and it would be good to have an internet connection. I already have Virgin broadband in MY house and do not want to take out two subscriptions if I can avoid it. I have had a longstanding BT dial-up address (all e-mails to which get re-routed automatically to Virgin) but BT require you to make one or two uses of the address every year to keep it alive.
I have grown so accustomed to the glories of Wi-fi broadband, I had forgotten how fiddly old dial-up systems were. I tried mobile dial-up at my husband's with "3", but his house fell into an area of no reception. I even went out into the open air in his square with the PowerBook and dongle to no avail.

Itunes disconnects dial up internet when a cd is inserted

Hi All,
I'm using the new USB modem on an IMAC with 10.4.3. I keep having problems with Itunes disconnecting my dial up internet connection. I connect to the Internet, open Itunes, insert a CD and almost all the time, my internet connection will disconnect. I've tried only inserting the CD, letting Itunes open and then connecting to the internet, but then when I want to put in another CD, the internet will disconnect.
If I don't put a CD in, then the Internet will stay connected for as long as I want it to.
Thanks in advance to those who help me.
IMAC 20" Isight built in Mac OS X (10.4.3)

Best guess--when you insert the CD iTunes queries the Gracenote CDDB (via your internet connection) in order to show the track names, and for some reason this query is causing your connection to disconnect.
Unfortunately there is no longer any preference to tell iTunes you don't want it to do this--it's automatic behavior, I think.
The only solution that occurs to me is to take the time out to import your CDs so you can play them directly from iTunes without inserting the actual CD.
G4 933 mhz Quicksilver Mac OS X (10.3.9)

Controlling dial up internet via a networked PC

I have a doozy of a question.
My dad needs a new computer at his office, and he wants a mac. yay! and we're about to get a mini tomorrow, but....
The only catch is, can someone else who is using a windows XP machine share his dial-up internet?
If this is possible, can that person also control the connection?
The situation is that the person who uses the internet the most is in another room, and my dad's computer is the one with the modem.
If it's not possible for XP to control the dial up connection on a mac, is it possible for a mac to control the internet connection on XP? (this way, we can just give the other person a modem and my dad can control it)
See what I need... can it be done? With XP it's a snap (just tick off "Allow other users to control this connection", but is it that simple in OS X?

I do have a contract with T-Moble which includes a web bundle.
I tried again last night with the process you've described: When pairing it with the MDA Vario, using 'select device type', the Mac will not discover the MDA, but it will if I repeat the search for it as a device, (presumably because it is a pda).
Once selected, I can enter the code onto the MDA when prompted as descibed, and dial-up networking is an option that I can select.
On the subsequent page I can the configure the username and password, but not the Modem script. This gives me the drop down list that i'd referred to before; it lists manufacturers like sony ericcson, nokia, motorola among others, plus options for apple, but none for MDA.
I've tried a variety of the apple options from the list, and then attempted to connect using the phone icon which has been installed to the toolbar at the head of the screen, but receive an error message to say that the connection has failed when I do.
Have tried looking through the connection and syncing options on the MDA with no joy either.

Dial-up internet connection problem

Hi guys,
I am facing a problem with Internet.
I have a dial-up Internet conection,
Its working finely with windows 7 but whenever I try to connect it wth my Mac intel,
It doesnt work?
Account Name & password was correctly entered but still doesnt work....
Anyone got the solution?

Hi Babowa
My iMac is 2 yrs old & There was no any modification done to my iMac,
so Accordng to you I dont have any internal modem in Mac.
& yes I only have ethernet cable from wall to windows laptop & there is nothing in between.
Which I direcly plug into the Ethernet port of Windows Laptop & it Works with Account Name & Password provided by ISP,
But When I plug it into the Mac with same information, I got "Authentication Failed" message.
I tried those settngs with ethernet option & also with creating PPPoE but no use......

Imac dial-up internet question

i will need this...
http://www.amazon.com/56K-USB-Modem-Windows-Linux/dp/B0013FDLM0/ref=sr11?ie=UTF8&s=electronics&qid=1292452299&sr=8-1
to get dial-up internet access for this imac, correct? any other options (live in country, no access to high speed)?
http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-3.06-27-inch-al uminum-late-2009-specs.html

+However I think the Apple USB Modem, although more expensive, is a better choice.+
I agree, but Apple hasn't sold this for some time, so it is very difficult to find (if you can find it at all). And, I just did a quick Google search; the merchants who are still selling them (found on Amazon) are taking the "price it at whatever the market will bear" thing a bit far; it originally sold for $49 and some of these people are trying to hawk it for about $200.

How to dial automatically internet connection in firefox browser at browser startup as in internet explorer

i have ADSL modem broadband connection in which i have to connect to internet by establishing a connection by using following steps
control panel>network connection>create a new connection>connect to internet>set up my connection manually >connect using dial up modem OR connect using a braodband connection in which username and password required
creating this connection i have to provide username and password provided by ISP.
i have to dial internet connection manually after modem set local area connection automatically
i found a solution for internet explorer and by changing setting internet explorer start automatically dialling internet connection as i start the internet explorer.
is their in mozilla firefox an option to automatically dial internet connection as i open firefox browser?
and is their is any solution for as i start my computer internet connections established automatically without opening any browser , if such solution is available ,please tell about it.

The setting you set in IE also affects Firefox. For example, if you set the following, then when Firefox makes a connection request to Windows, Windows is supposed to dial the connection:
Windows Control Panel > Internet Options > Connections or <br>
Internet Explorer Tools menu > Internet Options > Connections
"Dial whenever a network connection is not present"
Source: [[How to make Firefox automatically dial up]]

N80 as a modem for Dial-up Internet access?

How do I use the N80 as a modem to dial a certain phone number for internet access? Which cable do I need for this to happen, and also how to set it up? Thanks in advance.

22-Jun-2007 02:50 AM
sophieinsydney wrote:
Can someone or NOKIA please help? I have seen so many messages of the same problem and apparently NOKIA remains silent! How do we reach Nokia support please?
sophieinsydney, these boards are for user-to-user support only. They're not the place to get support from Nokia. If you want to get help from Nokia, you should use the 'Contact us' link at the top of the page to contact your local Nokia team.
You might also want to read over the Discussion Board Guidelines which is something everyone should read before posting on the boards. It explains this and other things.
Board Mod Team
READ THIS FIRST!
Click here if you want help from Nokia

Dial up internet hookup in Australia

Similar Messages

Maybe you are looking for